Commit | Line | Data |
---|---|---|
be3d7d02 AB |
1 | /* Device tree file for the Zyxel NSA 320 NAS box. |
2 | * | |
3 | * Copyright (c) 2014, Adam Baker <linux@baker-net.org.uk> | |
4 | * | |
5 | * This program is free software; you can redistribute it and/or | |
6 | * modify it under the terms of the GNU General Public License | |
7 | * as published by the Free Software Foundation; either version | |
8 | * 2 of the License, or (at your option) any later version. | |
9 | * | |
10 | * Based upon the board setup file created by Peter Schildmann */ | |
11 | ||
12 | /dts-v1/; | |
13 | ||
76a93dc9 | 14 | #include "kirkwood-nsa3x0-common.dtsi" |
be3d7d02 AB |
15 | |
16 | / { | |
17 | model = "Zyxel NSA320"; | |
18 | compatible = "zyxel,nsa320", "marvell,kirkwood-88f6281", "marvell,kirkwood"; | |
19 | ||
20 | memory { | |
21 | device_type = "memory"; | |
22 | reg = <0x00000000 0x20000000>; | |
23 | }; | |
24 | ||
25 | chosen { | |
26 | bootargs = "console=ttyS0,115200"; | |
ab833614 | 27 | stdout-path = &uart0; |
be3d7d02 AB |
28 | }; |
29 | ||
30 | mbus { | |
31 | pcie-controller { | |
32 | status = "okay"; | |
33 | ||
34 | pcie@1,0 { | |
35 | status = "okay"; | |
36 | }; | |
37 | }; | |
38 | }; | |
39 | ||
40 | ocp@f1000000 { | |
a9483969 | 41 | pinctrl: pin-controller@10000 { |
be3d7d02 AB |
42 | pinctrl-names = "default"; |
43 | ||
44 | /* SATA Activity and Present pins are not connected */ | |
45 | pmx_sata0: pmx-sata0 { | |
46 | marvell,pins ; | |
47 | marvell,function = "sata0"; | |
48 | }; | |
49 | ||
50 | pmx_sata1: pmx-sata1 { | |
51 | marvell,pins ; | |
52 | marvell,function = "sata1"; | |
53 | }; | |
54 | ||
55 | pmx_led_hdd2_green: pmx-led-hdd2-green { | |
56 | marvell,pins = "mpp12"; | |
57 | marvell,function = "gpio"; | |
58 | }; | |
59 | ||
60 | pmx_led_hdd2_red: pmx-led-hdd2-red { | |
61 | marvell,pins = "mpp13"; | |
62 | marvell,function = "gpio"; | |
63 | }; | |
64 | ||
65 | pmx_mcu_data: pmx-mcu-data { | |
66 | marvell,pins = "mpp14"; | |
67 | marvell,function = "gpio"; | |
68 | }; | |
69 | ||
70 | pmx_led_usb_green: pmx-led-usb-green { | |
71 | marvell,pins = "mpp15"; | |
72 | marvell,function = "gpio"; | |
73 | }; | |
74 | ||
75 | pmx_mcu_clk: pmx-mcu-clk { | |
76 | marvell,pins = "mpp16"; | |
77 | marvell,function = "gpio"; | |
78 | }; | |
79 | ||
80 | pmx_mcu_act: pmx-mcu-act { | |
81 | marvell,pins = "mpp17"; | |
82 | marvell,function = "gpio"; | |
83 | }; | |
84 | ||
85 | pmx_led_sys_green: pmx-led-sys-green { | |
86 | marvell,pins = "mpp28"; | |
87 | marvell,function = "gpio"; | |
88 | }; | |
89 | ||
90 | pmx_led_sys_orange: pmx-led-sys-orange { | |
91 | marvell,pins = "mpp29"; | |
92 | marvell,function = "gpio"; | |
93 | }; | |
94 | ||
95 | pmx_led_hdd1_green: pmx-led-hdd1-green { | |
96 | marvell,pins = "mpp41"; | |
97 | marvell,function = "gpio"; | |
98 | }; | |
99 | ||
100 | pmx_led_hdd1_red: pmx-led-hdd1-red { | |
101 | marvell,pins = "mpp42"; | |
102 | marvell,function = "gpio"; | |
103 | }; | |
104 | ||
105 | pmx_htp: pmx-htp { | |
106 | marvell,pins = "mpp43"; | |
107 | marvell,function = "gpio"; | |
108 | }; | |
109 | ||
110 | /* Buzzer needs to be switched at around 1kHz so is | |
111 | not compatible with the gpio-beeper driver. */ | |
112 | pmx_buzzer: pmx-buzzer { | |
113 | marvell,pins = "mpp44"; | |
114 | marvell,function = "gpio"; | |
115 | }; | |
116 | ||
117 | pmx_vid_b1: pmx-vid-b1 { | |
118 | marvell,pins = "mpp45"; | |
119 | marvell,function = "gpio"; | |
120 | }; | |
121 | ||
122 | pmx_power_resume_data: pmx-power-resume-data { | |
123 | marvell,pins = "mpp47"; | |
124 | marvell,function = "gpio"; | |
125 | }; | |
126 | ||
127 | pmx_power_resume_clk: pmx-power-resume-clk { | |
128 | marvell,pins = "mpp49"; | |
129 | marvell,function = "gpio"; | |
130 | }; | |
131 | }; | |
132 | ||
133 | i2c@11000 { | |
134 | status = "okay"; | |
135 | ||
136 | pcf8563: pcf8563@51 { | |
137 | compatible = "nxp,pcf8563"; | |
138 | reg = <0x51>; | |
139 | }; | |
140 | }; | |
141 | }; | |
142 | ||
143 | regulators { | |
144 | usb0_power: regulator@1 { | |
145 | enable-active-high; | |
146 | }; | |
147 | }; | |
148 | ||
149 | gpio-leds { | |
150 | compatible = "gpio-leds"; | |
151 | pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red | |
152 | &pmx_led_usb_green | |
153 | &pmx_led_sys_green &pmx_led_sys_orange | |
154 | &pmx_led_copy_green &pmx_led_copy_red | |
155 | &pmx_led_hdd1_green &pmx_led_hdd1_red>; | |
156 | pinctrl-names = "default"; | |
157 | ||
158 | green-sys { | |
159 | label = "nsa320:green:sys"; | |
160 | gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; | |
161 | }; | |
162 | orange-sys { | |
163 | label = "nsa320:orange:sys"; | |
164 | gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; | |
165 | }; | |
166 | green-hdd1 { | |
167 | label = "nsa320:green:hdd1"; | |
168 | gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; | |
169 | }; | |
170 | red-hdd1 { | |
171 | label = "nsa320:red:hdd1"; | |
172 | gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; | |
173 | }; | |
174 | green-hdd2 { | |
175 | label = "nsa320:green:hdd2"; | |
176 | gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; | |
177 | }; | |
178 | red-hdd2 { | |
179 | label = "nsa320:red:hdd2"; | |
180 | gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; | |
181 | }; | |
182 | green-usb { | |
183 | label = "nsa320:green:usb"; | |
184 | gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; | |
185 | }; | |
186 | green-copy { | |
187 | label = "nsa320:green:copy"; | |
188 | gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; | |
189 | }; | |
190 | red-copy { | |
191 | label = "nsa320:red:copy"; | |
192 | gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; | |
193 | }; | |
194 | }; | |
195 | ||
196 | /* The following pins are currently not assigned to a driver, | |
197 | some of them should be configured as inputs. | |
198 | pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act | |
199 | &pmx_htp &pmx_vid_b1 | |
200 | &pmx_power_resume_data &pmx_power_resume_clk>; */ | |
201 | }; | |
202 | ||
203 | &mdio { | |
204 | status = "okay"; | |
205 | ethphy0: ethernet-phy@1 { | |
206 | reg = <1>; | |
207 | }; | |
208 | }; | |
209 | ||
210 | ð0 { | |
211 | status = "okay"; | |
212 | ethernet0-port@0 { | |
213 | phy-handle = <ðphy0>; | |
214 | }; | |
215 | }; |