Commit | Line | Data |
---|---|---|
40ecc02e DL |
1 | /* |
2 | * Support for CompuLab CM-T3530 | |
3 | */ | |
4 | /dts-v1/; | |
5 | ||
6 | #include "omap34xx.dtsi" | |
7 | #include "omap3-cm-t3x30.dtsi" | |
8 | ||
9 | / { | |
10 | model = "CompuLab CM-T3530"; | |
11 | compatible = "compulab,omap3-cm-t3530", "ti,omap34xx", "ti,omap3"; | |
e1902bbe SR |
12 | |
13 | /* Regulator to trigger the reset signal of the Wifi module */ | |
14 | mmc2_sdio_reset: regulator-mmc2-sdio-reset { | |
15 | compatible = "regulator-fixed"; | |
16 | regulator-name = "regulator-mmc2-sdio-reset"; | |
17 | regulator-min-microvolt = <3300000>; | |
18 | regulator-max-microvolt = <3300000>; | |
19 | gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>; | |
20 | enable-active-high; | |
21 | }; | |
22 | }; | |
23 | ||
24 | &omap3_pmx_core { | |
25 | mmc2_pins: pinmux_mmc2_pins { | |
26 | pinctrl-single,pins = < | |
27 | OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ | |
28 | OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ | |
29 | OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ | |
30 | OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ | |
31 | OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ | |
32 | OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ | |
33 | OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat4.sdmmc2_dir_dat0 */ | |
34 | OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat5.sdmmc2_dir_dat1 */ | |
35 | OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat6.sdmmc2_dir_cmd */ | |
36 | OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1) /* sdmmc2_dat7.sdmmc2_clkin */ | |
37 | >; | |
38 | }; | |
39 | }; | |
40 | ||
41 | &mmc2 { | |
42 | pinctrl-names = "default"; | |
43 | pinctrl-0 = <&mmc2_pins>; | |
44 | vmmc-supply = <&mmc2_sdio_reset>; | |
45 | non-removable; | |
46 | bus-width = <4>; | |
47 | cap-power-off-card; | |
40ecc02e | 48 | }; |
e5ee042b DL |
49 | |
50 | &dss { | |
51 | status = "ok"; | |
52 | ||
53 | pinctrl-names = "default"; | |
54 | pinctrl-0 = < | |
55 | &dss_dpi_pins_common | |
56 | &dss_dpi_pins_cm_t35x | |
57 | >; | |
58 | }; | |
59 |