Commit | Line | Data |
---|---|---|
0f0cfc69 TL |
1 | /* |
2 | * Support for CompuLab CM-T3730 | |
3 | */ | |
4 | /dts-v1/; | |
5 | ||
6 | #include "omap36xx.dtsi" | |
7 | #include "omap3-cm-t3x30.dtsi" | |
8 | ||
9 | / { | |
10 | model = "CompuLab CM-T3730"; | |
11 | compatible = "compulab,omap3-cm-t3730", "ti,omap36xx", "ti,omap3"; | |
12 | ||
13 | wl12xx_vmmc2: wl12xx_vmmc2 { | |
14 | compatible = "regulator-fixed"; | |
15 | regulator-name = "vw1271"; | |
16 | pinctrl-names = "default"; | |
17 | pinctrl-0 = <&wl12xx_gpio>; | |
18 | regulator-min-microvolt = <1800000>; | |
19 | regulator-max-microvolt = <1800000>; | |
20 | gpio = <&gpio3 9 GPIO_ACTIVE_HIGH>; /* gpio73 */ | |
21 | startup-delay-us = <20000>; | |
22 | enable-active-high; | |
23 | }; | |
24 | ||
25 | wl12xx_vaux2: wl12xx_vaux2 { | |
26 | compatible = "regulator-fixed"; | |
27 | regulator-name = "vwl1271_vaux2"; | |
28 | regulator-min-microvolt = <1800000>; | |
29 | regulator-max-microvolt = <1800000>; | |
30 | vin-supply = <&vaux2>; | |
31 | }; | |
32 | }; | |
33 | ||
e5ee042b DL |
34 | &omap3_pmx_wkup { |
35 | dss_dpi_pins_cm_t3730: pinmux_dss_dpi_pins_cm_t3730 { | |
36 | pinctrl-single,pins = < | |
37 | OMAP3_WKUP_IOPAD(0x2a08, PIN_OUTPUT | MUX_MODE3) /* sys_boot0.dss_data18 */ | |
38 | OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3) /* sys_boot1.dss_data19 */ | |
39 | OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3) /* sys_boot3.dss_data20 */ | |
40 | OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3) /* sys_boot4.dss_data21 */ | |
41 | OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3) /* sys_boot5.dss_data22 */ | |
42 | OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3) /* sys_boot6.dss_data23 */ | |
43 | >; | |
44 | }; | |
45 | }; | |
46 | ||
0f0cfc69 | 47 | &omap3_pmx_core { |
0f0cfc69 TL |
48 | |
49 | mmc2_pins: pinmux_mmc2_pins { | |
50 | pinctrl-single,pins = < | |
fb5f895f DL |
51 | OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ |
52 | OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ | |
53 | OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ | |
54 | OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ | |
55 | OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ | |
56 | OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ | |
0f0cfc69 TL |
57 | >; |
58 | }; | |
59 | ||
0f0cfc69 TL |
60 | wl12xx_gpio: pinmux_wl12xx_gpio { |
61 | pinctrl-single,pins = < | |
fb5f895f DL |
62 | OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4) /* dss_data3.gpio_73 */ |
63 | OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE4) /* sdmmc2_dat4.gpio_136 */ | |
0f0cfc69 TL |
64 | >; |
65 | }; | |
66 | }; | |
67 | ||
0f0cfc69 TL |
68 | &mmc2 { |
69 | pinctrl-names = "default"; | |
70 | pinctrl-0 = <&mmc2_pins>; | |
71 | vmmc-supply = <&wl12xx_vmmc2>; | |
72 | vmmc_aux-supply = <&wl12xx_vaux2>; | |
73 | non-removable; | |
74 | bus-width = <4>; | |
75 | cap-power-off-card; | |
99f84cae EP |
76 | |
77 | #address-cells = <1>; | |
78 | #size-cells = <0>; | |
79 | wlcore: wlcore@2 { | |
80 | compatible = "ti,wl1271"; | |
81 | reg = <2>; | |
82 | interrupt-parent = <&gpio5>; | |
83 | interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; /* gpio 136 */ | |
84 | ref-clock-frequency = <38400000>; | |
85 | }; | |
0f0cfc69 | 86 | }; |
e5ee042b DL |
87 | |
88 | &dss { | |
89 | status = "ok"; | |
90 | ||
91 | pinctrl-names = "default"; | |
92 | pinctrl-0 = < | |
93 | &dss_dpi_pins_common | |
94 | &dss_dpi_pins_cm_t3730 | |
95 | >; | |
96 | }; | |
97 |