projects / deliverable / linux.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
ARM: dts: omap3-gta04: Move spi gpio pins to pmx_core2
[deliverable/linux.git] / arch / arm / boot / dts / omap3-gta04.dts
CommitLineData
adfe1473
MB		 1/*
2 * Copyright (C) 2013 Marek Belisko <marek@goldelico.com>
3 *
4 * Based on omap3-beagle-xm.dts
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 */
10/dts-v1/;
11
12#include "omap36xx.dtsi"
13
14/ {
15 model = "OMAP3 GTA04";
ae41a303 16 compatible = "ti,omap3-gta04", "ti,omap36xx", "ti,omap3";
adfe1473
MB		 17
18 cpus {
19 cpu@0 {
20 cpu0-supply = <&vcc>;
21 };
22 };
23
24 memory {
25 device_type = "memory";
26 reg = <0x80000000 0x20000000>; /* 512 MB */
27 };
28
29 gpio-keys {
30 compatible = "gpio-keys";
31
32 aux-button {
33 label = "aux";
34 linux,code = <169>;
d8bd6731 35 gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
adfe1473
MB		 36 gpio-key,wakeup;
37 };
38 };
6764f648
N		 39
40 sound {
41 compatible = "ti,omap-twl4030";
42 ti,model = "gta04";
43
44 ti,mcbsp = <&mcbsp2>;
45 ti,codec = <&twl_audio>;
46 };
c2e138bc
MB		 47
48 spi_lcd {
49 compatible = "spi-gpio";
50 #address-cells = <0x1>;
51 #size-cells = <0x0>;
52 pinctrl-names = "default";
53 pinctrl-0 = <&spi_gpio_pins>;
54
55 gpio-sck = <&gpio1 12 0>;
56 gpio-miso = <&gpio1 18 0>;
57 gpio-mosi = <&gpio1 20 0>;
58 cs-gpios = <&gpio1 19 0>;
59 num-chipselects = <1>;
60
61 /* lcd panel */
62 lcd: td028ttec1@0 {
63 compatible = "toppoly,td028ttec1";
64 reg = <0>;
65 spi-max-frequency = <100000>;
66 spi-cpol;
67 spi-cpha;
68
69 label = "lcd";
70 port {
71 lcd_in: endpoint {
72 remote-endpoint = <&dpi_out>;
73 };
74 };
75 };
76 };
adfe1473
MB		 77};
78
79&omap3_pmx_core {
80 uart1_pins: pinmux_uart1_pins {
81 pinctrl-single,pins = <
82 0x152 (PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
83 0x14c (PIN_OUTPUT |MUX_MODE0) /* uart1_tx.uart1_tx */
84 >;
85 };
86
87 uart2_pins: pinmux_uart2_pins {
88 pinctrl-single,pins = <
89 0x14a (PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
90 0x148 (PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
91 >;
92 };
93
94 uart3_pins: pinmux_uart3_pins {
95 pinctrl-single,pins = <
96 0x16e (PIN_INPUT | MUX_MODE0) /* uart3_rx.uart3_rx */
97 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx.uart3_tx */
98 >;
99 };
100
101 mmc1_pins: pinmux_mmc1_pins {
102 pinctrl-single,pins = <
103 0x114 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
104 0x116 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
105 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
106 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
107 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
108 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
109 >;
110 };
c2e138bc
MB		 111
112 dss_dpi_pins: pinmux_dss_dpi_pins {
113 pinctrl-single,pins = <
114 0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
115 0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
116 0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
117 0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
118 0x0ac (PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
119 0x0ae (PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
120 0x0b0 (PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
121 0x0b2 (PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
122 0x0b4 (PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
123 0x0b6 (PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
124 0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
125 0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
126 0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
127 0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
128 0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
129 0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
130 0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
131 0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
132 0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
133 0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
134 0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
135 0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
136 0x0d0 (PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
137 0x0d2 (PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
138 0x0d4 (PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
139 0x0d6 (PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
140 0x0d8 (PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
141 0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
142 >;
143 };
6c402f8d 144};
c2e138bc 145
6c402f8d 146&omap3_pmx_core2 {
c2e138bc 147 spi_gpio_pins: spi_gpio_pinmux {
6c402f8d
MB		 148 pinctrl-single,pins = <
149 OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE4) /* clk */
150 OMAP3630_CORE2_IOPAD(0x25e6, PIN_OUTPUT | MUX_MODE4) /* cs */
151 OMAP3630_CORE2_IOPAD(0x25e8, PIN_OUTPUT | MUX_MODE4) /* tx */
152 OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE4) /* rx */
c2e138bc
MB		 153 >;
154 };
adfe1473
MB		 155};
156
157&i2c1 {
158 clock-frequency = <2600000>;
159
160 twl: twl@48 {
161 reg = <0x48>;
162 interrupts = <7>; /* SYS_NIRQ cascaded to intc */
163 interrupt-parent = <&intc>;
164 };
6764f648
N		 165
166 twl_audio: audio {
167 compatible = "ti,twl4030-audio";
168 codec {
169 };
170 };
adfe1473
MB		 171};
172
173#include "twl4030.dtsi"
174#include "twl4030_omap3.dtsi"
175
176&i2c2 {
177 clock-frequency = <400000>;
178
179 /* pressure sensor */
180 bmp085@77 {
181 compatible = "bosch,bmp085";
182 reg = <0x77>;
d26794c0
MB		 183 interrupt-parent = <&gpio4>;
184 interrupts = <17 IRQ_TYPE_EDGE_RISING>;
adfe1473
MB		 185 };
186
24d0bb88
N		 187 /* accelerometer */
188 bma180@41 {
189 compatible = "bosch,bma180";
190 reg = <0x41>;
191 interrupt-parent = <&gpio3>;
192 interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
193 };
194
adfe1473
MB		 195 /* leds */
196 tca6507@45 {
197 compatible = "ti,tca6507";
198 #address-cells = <1>;
199 #size-cells = <0>;
200 reg = <0x45>;
201
e51c6bea
MB		 202 gpio-controller;
203 #gpio-cells = <2>;
204
adfe1473
MB		 205 gta04_led0: red_aux@0 {
206 label = "gta04:red:aux";
207 reg = <0x0>;
208 };
209
210 gta04_led1: green_aux@1 {
211 label = "gta04:green:aux";
212 reg = <0x1>;
213 };
214
215 gta04_led3: red_power@3 {
216 label = "gta04:red:power";
217 reg = <0x3>;
218 linux,default-trigger = "default-on";
219 };
220
221 gta04_led4: green_power@4 {
222 label = "gta04:green:power";
223 reg = <0x4>;
224 };
e51c6bea
MB		 225
226 wifi_reset: wifi_reset@6 {
227 reg = <0x6>;
228 compatible = "gpio";
229 };
adfe1473 230 };
32f2c393
N		 231
232 /* compass aka magnetometer */
233 hmc5843@1e {
9edc57af 234 compatible = "honeywell,hmc5883l";
32f2c393
N		 235 reg = <0x1e>;
236 };
9cbc03b4
MB		 237
238 /* touchscreen */
239 tsc2007@48 {
240 compatible = "ti,tsc2007";
241 reg = <0x48>;
242 interrupt-parent = <&gpio6>;
243 interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
244 gpios = <&gpio6 0 GPIO_ACTIVE_LOW>;
245 ti,x-plate-ohms = <600>;
246 };
adfe1473
MB		 247};
248
249&i2c3 {
250 clock-frequency = <100000>;
251};
252
253&usb_otg_hs {
254 interface-type = <0>;
255 usb-phy = <&usb2_phy>;
d2afcf09
RQ		 256 phys = <&usb2_phy>;
257 phy-names = "usb2-phy";
adfe1473
MB		 258 mode = <3>;
259 power = <50>;
260};
261
262&mmc1 {
263 pinctrl-names = "default";
264 pinctrl-0 = <&mmc1_pins>;
265 vmmc-supply = <&vmmc1>;
adfe1473 266 bus-width = <4>;
2d6ac29e 267 ti,non-removable;
adfe1473
MB		 268};
269
270&mmc2 {
5a13ba68
N		 271 vmmc-supply = <&vaux4>;
272 bus-width = <4>;
273 ti,non-removable;
adfe1473
MB		 274};
275
276&mmc3 {
277 status = "disabled";
278};
279
280&uart1 {
281 pinctrl-names = "default";
282 pinctrl-0 = <&uart1_pins>;
283};
284
285&uart2 {
286 pinctrl-names = "default";
287 pinctrl-0 = <&uart2_pins>;
288};
289
290&uart3 {
291 pinctrl-names = "default";
292 pinctrl-0 = <&uart3_pins>;
293};
294
8bdc9e90
N		 295&charger {
296 bb_uvolt = <3200000>;
297 bb_uamp = <150>;
298};
5a13ba68
N		 299
300&vaux4 {
301 regulator-min-microvolt = <2800000>;
302 regulator-max-microvolt = <3150000>;
303};
c2e138bc
MB		 304
305/* Needed to power the DPI pins */
306&vpll2 {
307 regulator-always-on;
308};
309
310&dss {
311 pinctrl-names = "default";
312 pinctrl-0 = < &dss_dpi_pins >;
313
314 status = "okay";
315
316 port {
317 dpi_out: endpoint {
318 remote-endpoint = <&lcd_in>;
319 data-lines = <24>;
320 };
321 };
322};
2618a182
MB		 323
324&gpmc {
325 ranges = <0 0 0x30000000 0x04>; /* CS0: NAND */
326
327 nand@0,0 {
328 reg = <0 0 0>; /* CS0, offset 0 */
329 nand-bus-width = <16>;
330 ti,nand-ecc-opt = "bch8";
331
332 gpmc,sync-clk-ps = <0>;
333 gpmc,cs-on-ns = <0>;
334 gpmc,cs-rd-off-ns = <44>;
335 gpmc,cs-wr-off-ns = <44>;
336 gpmc,adv-on-ns = <6>;
337 gpmc,adv-rd-off-ns = <34>;
338 gpmc,adv-wr-off-ns = <44>;
339 gpmc,we-off-ns = <40>;
340 gpmc,oe-off-ns = <54>;
341 gpmc,access-ns = <64>;
342 gpmc,rd-cycle-ns = <82>;
343 gpmc,wr-cycle-ns = <82>;
344 gpmc,wr-access-ns = <40>;
345 gpmc,wr-data-mux-bus-ns = <0>;
346 gpmc,device-width = <2>;
347
348 #address-cells = <1>;
349 #size-cells = <1>;
350
351 x-loader@0 {
352 label = "X-Loader";
353 reg = <0 0x80000>;
354 };
355
356 bootloaders@80000 {
357 label = "U-Boot";
358 reg = <0x80000 0x1e0000>;
359 };
360
361 bootloaders_env@260000 {
362 label = "U-Boot Env";
363 reg = <0x260000 0x20000>;
364 };
365
366 kernel@280000 {
367 label = "Kernel";
368 reg = <0x280000 0x400000>;
369 };
370
371 filesystem@680000 {
372 label = "File System";
373 reg = <0x680000 0xf980000>;
374 };
375 };
376};
Linux kernel - Deliverables
This page took 0.082445 seconds and 5 git commands to generate.