[deliverable/linux.git] / arch / arm / boot / dts / omap3-gta04.dts

/*
 * Copyright (C) 2013 Marek Belisko <marek@goldelico.com>
 *
 * Based on omap3-beagle-xm.dts
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
/dts-v1/;

#include "omap36xx.dtsi"

/ {
	model = "OMAP3 GTA04";
	compatible = "ti,omap3-gta04", "ti,omap36xx", "ti,omap3";

	cpus {
		cpu@0 {
			cpu0-supply = <&vcc>;
		};
	};

	memory {
		device_type = "memory";
		reg = <0x80000000 0x20000000>; /* 512 MB */
	};

	gpio-keys {
		compatible = "gpio-keys";

		aux-button {
			label = "aux";
			linux,code = <169>;
			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
			gpio-key,wakeup;
		};
	};

	sound {
		compatible = "ti,omap-twl4030";
		ti,model = "gta04";

		ti,mcbsp = <&mcbsp2>;
		ti,codec = <&twl_audio>;
	};

	spi_lcd {
		compatible = "spi-gpio";
		#address-cells = <0x1>;
		#size-cells = <0x0>;
		pinctrl-names = "default";
		pinctrl-0 = <&spi_gpio_pins>;

		gpio-sck = <&gpio1 12 0>;
		gpio-miso = <&gpio1 18 0>;
		gpio-mosi = <&gpio1 20 0>;
		cs-gpios = <&gpio1 19 0>;
		num-chipselects = <1>;

		/* lcd panel */
		lcd: td028ttec1@0 {
			compatible = "toppoly,td028ttec1";
			reg = <0>;
			spi-max-frequency = <100000>;
			spi-cpol;
			spi-cpha;

			label = "lcd";
			port {
				lcd_in: endpoint {
					remote-endpoint = <&dpi_out>;
				};
			};
		};
	};
};

&omap3_pmx_core {
	uart1_pins: pinmux_uart1_pins {
		pinctrl-single,pins = <
			0x152 (PIN_INPUT | MUX_MODE0)		/* uart1_rx.uart1_rx */
			0x14c (PIN_OUTPUT |MUX_MODE0)		/* uart1_tx.uart1_tx */
		>;
	};

	uart2_pins: pinmux_uart2_pins {
		pinctrl-single,pins = <
			0x14a (PIN_INPUT | MUX_MODE0)		/* uart2_rx.uart2_rx */
			0x148 (PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
		>;
	};

	uart3_pins: pinmux_uart3_pins {
		pinctrl-single,pins = <
			0x16e (PIN_INPUT | MUX_MODE0)		/* uart3_rx.uart3_rx */
			0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx.uart3_tx */
		>;
	};

	mmc1_pins: pinmux_mmc1_pins {
		pinctrl-single,pins = <
			0x114 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
			0x116 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
			0x118 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0.sdmmc1_dat0 */
			0x11a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
			0x11c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
			0x11e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
		>;
	};

	dss_dpi_pins: pinmux_dss_dpi_pins {
               pinctrl-single,pins = <
                       0x0a4 (PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
                       0x0a6 (PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
                       0x0a8 (PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
                       0x0aa (PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
                       0x0ac (PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
                       0x0ae (PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
                       0x0b0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
                       0x0b2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
                       0x0b4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
                       0x0b6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
                       0x0b8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
                       0x0ba (PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
                       0x0bc (PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
                       0x0be (PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
                       0x0c0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
                       0x0c2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
                       0x0c4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
                       0x0c6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
                       0x0c8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
                       0x0ca (PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
                       0x0cc (PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
                       0x0ce (PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
                       0x0d0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data18.dss_data18 */
                       0x0d2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data19.dss_data19 */
                       0x0d4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data20.dss_data20 */
                       0x0d6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data21.dss_data21 */
                       0x0d8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
                       0x0da (PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
               >;
       };

	spi_gpio_pins: spi_gpio_pinmux {
		pinctrl-single,pins = <0x5a8 (PIN_OUTPUT | MUX_MODE4) /* clk */
			0x5b6 (PIN_OUTPUT | MUX_MODE4) /* cs */
			0x5b8 (PIN_OUTPUT | MUX_MODE4) /* tx */
			0x5b4 (PIN_INPUT | MUX_MODE4) /* rx */
		>;
	};
};

&i2c1 {
	clock-frequency = <2600000>;

	twl: twl@48 {
		reg = <0x48>;
		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
		interrupt-parent = <&intc>;
	};

	twl_audio: audio {
		compatible = "ti,twl4030-audio";
		codec {
		};
	};
};

#include "twl4030.dtsi"
#include "twl4030_omap3.dtsi"

&i2c2 {
	clock-frequency = <400000>;

	/* pressure sensor */
	bmp085@77 {
		compatible = "bosch,bmp085";
		reg = <0x77>;
		interrupt-parent = <&gpio4>;
		interrupts = <17 IRQ_TYPE_EDGE_RISING>;
	};

	/* accelerometer */
	bma180@41 {
		compatible = "bosch,bma180";
		reg = <0x41>;
		interrupt-parent = <&gpio3>;
		interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
	};

	/* leds */
	tca6507@45 {
		compatible = "ti,tca6507";
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <0x45>;

		gta04_led0: red_aux@0 {
			label = "gta04:red:aux";
			reg = <0x0>;
		};

		gta04_led1: green_aux@1 {
			label = "gta04:green:aux";
			reg = <0x1>;
		};

		gta04_led3: red_power@3 {
			label = "gta04:red:power";
			reg = <0x3>;
			linux,default-trigger = "default-on";
		};

		gta04_led4: green_power@4 {
			label = "gta04:green:power";
			reg = <0x4>;
		};
	};

	/* compass aka magnetometer */
	hmc5843@1e {
		compatible = "honeywell,hmc5843";
		reg = <0x1e>;
	};

	/* touchscreen */
	tsc2007@48 {
		compatible = "ti,tsc2007";
		reg = <0x48>;
		interrupt-parent = <&gpio6>;
		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
		gpios = <&gpio6 0 GPIO_ACTIVE_LOW>;
		ti,x-plate-ohms = <600>;
	};
};

&i2c3 {
	clock-frequency = <100000>;
};

&usb_otg_hs {
	interface-type = <0>;
	usb-phy = <&usb2_phy>;
	phys = <&usb2_phy>;
	phy-names = "usb2-phy";
	mode = <3>;
	power = <50>;
};

&mmc1 {
	pinctrl-names = "default";
	pinctrl-0 = <&mmc1_pins>;
	vmmc-supply = <&vmmc1>;
	bus-width = <4>;
	ti,non-removable;
};

&mmc2 {
	vmmc-supply = <&vaux4>;
	bus-width = <4>;
	ti,non-removable;
};

&mmc3 {
	status = "disabled";
};

&uart1 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart1_pins>;
};

&uart2 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart2_pins>;
};

&uart3 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart3_pins>;
};

&charger {
	bb_uvolt = <3200000>;
	bb_uamp = <150>;
};

&vaux4 {
	regulator-min-microvolt = <2800000>;
	regulator-max-microvolt = <3150000>;
};

/* Needed to power the DPI pins */
&vpll2 {
	regulator-always-on;
};

&dss {
	pinctrl-names = "default";
	pinctrl-0 = < &dss_dpi_pins >;

	status = "okay";

	port {
		dpi_out: endpoint {
			remote-endpoint = <&lcd_in>;
			data-lines = <24>;
		};
	};
};
Commit	Line	Data
adfe1473 MB	1	/*
	2	* Copyright (C) 2013 Marek Belisko <marek@goldelico.com>
	3	*
	4	* Based on omap3-beagle-xm.dts
	5	*
	6	* This program is free software; you can redistribute it and/or modify
	7	* it under the terms of the GNU General Public License version 2 as
	8	* published by the Free Software Foundation.
	9	*/
	10	/dts-v1/;
	11
	12	#include "omap36xx.dtsi"
	13
	14	/ {
	15	model = "OMAP3 GTA04";
ae41a303	16	compatible = "ti,omap3-gta04", "ti,omap36xx", "ti,omap3";
adfe1473 MB	17
	18	cpus {
	19	cpu@0 {
	20	cpu0-supply = <&vcc>;
	21	};
	22	};
	23
	24	memory {
	25	device_type = "memory";
	26	reg = <0x80000000 0x20000000>; /* 512 MB */
	27	};
	28
	29	gpio-keys {
	30	compatible = "gpio-keys";
	31
	32	aux-button {
	33	label = "aux";
	34	linux,code = <169>;
d8bd6731	35	gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
adfe1473 MB	36	gpio-key,wakeup;
	37	};
	38	};
6764f648 N	39
	40	sound {
	41	compatible = "ti,omap-twl4030";
	42	ti,model = "gta04";
	43
	44	ti,mcbsp = <&mcbsp2>;
	45	ti,codec = <&twl_audio>;
	46	};
c2e138bc MB	47
	48	spi_lcd {
	49	compatible = "spi-gpio";
	50	#address-cells = <0x1>;
	51	#size-cells = <0x0>;
	52	pinctrl-names = "default";
	53	pinctrl-0 = <&spi_gpio_pins>;
	54
	55	gpio-sck = <&gpio1 12 0>;
	56	gpio-miso = <&gpio1 18 0>;
	57	gpio-mosi = <&gpio1 20 0>;
	58	cs-gpios = <&gpio1 19 0>;
	59	num-chipselects = <1>;
	60
	61	/* lcd panel */
	62	lcd: td028ttec1@0 {
	63	compatible = "toppoly,td028ttec1";
	64	reg = <0>;
	65	spi-max-frequency = <100000>;
	66	spi-cpol;
	67	spi-cpha;
	68
	69	label = "lcd";
	70	port {
	71	lcd_in: endpoint {
	72	remote-endpoint = <&dpi_out>;
	73	};
	74	};
	75	};
	76	};
adfe1473 MB	77	};
	78
	79	&omap3_pmx_core {
	80	uart1_pins: pinmux_uart1_pins {
	81	pinctrl-single,pins = <
	82	0x152 (PIN_INPUT \| MUX_MODE0) /* uart1_rx.uart1_rx */
	83	0x14c (PIN_OUTPUT \|MUX_MODE0) /* uart1_tx.uart1_tx */
	84	>;
	85	};
	86
	87	uart2_pins: pinmux_uart2_pins {
	88	pinctrl-single,pins = <
	89	0x14a (PIN_INPUT \| MUX_MODE0) /* uart2_rx.uart2_rx */
	90	0x148 (PIN_OUTPUT \| MUX_MODE0) /* uart2_tx.uart2_tx */
	91	>;
	92	};
	93
	94	uart3_pins: pinmux_uart3_pins {
	95	pinctrl-single,pins = <
	96	0x16e (PIN_INPUT \| MUX_MODE0) /* uart3_rx.uart3_rx */
	97	0x170 (PIN_OUTPUT \| MUX_MODE0) /* uart3_tx.uart3_tx */
	98	>;
	99	};
	100
	101	mmc1_pins: pinmux_mmc1_pins {
	102	pinctrl-single,pins = <
	103	0x114 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
	104	0x116 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
	105	0x118 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
	106	0x11a (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
	107	0x11c (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
	108	0x11e (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
	109	>;
	110	};
c2e138bc MB	111
	112	dss_dpi_pins: pinmux_dss_dpi_pins {
	113	pinctrl-single,pins = <
	114	0x0a4 (PIN_OUTPUT \| MUX_MODE0) /* dss_pclk.dss_pclk */
	115	0x0a6 (PIN_OUTPUT \| MUX_MODE0) /* dss_hsync.dss_hsync */
	116	0x0a8 (PIN_OUTPUT \| MUX_MODE0) /* dss_vsync.dss_vsync */
	117	0x0aa (PIN_OUTPUT \| MUX_MODE0) /* dss_acbias.dss_acbias */
	118	0x0ac (PIN_OUTPUT \| MUX_MODE0) /* dss_data0.dss_data0 */
	119	0x0ae (PIN_OUTPUT \| MUX_MODE0) /* dss_data1.dss_data1 */
	120	0x0b0 (PIN_OUTPUT \| MUX_MODE0) /* dss_data2.dss_data2 */
	121	0x0b2 (PIN_OUTPUT \| MUX_MODE0) /* dss_data3.dss_data3 */
	122	0x0b4 (PIN_OUTPUT \| MUX_MODE0) /* dss_data4.dss_data4 */
	123	0x0b6 (PIN_OUTPUT \| MUX_MODE0) /* dss_data5.dss_data5 */
	124	0x0b8 (PIN_OUTPUT \| MUX_MODE0) /* dss_data6.dss_data6 */
	125	0x0ba (PIN_OUTPUT \| MUX_MODE0) /* dss_data7.dss_data7 */
	126	0x0bc (PIN_OUTPUT \| MUX_MODE0) /* dss_data8.dss_data8 */
	127	0x0be (PIN_OUTPUT \| MUX_MODE0) /* dss_data9.dss_data9 */
	128	0x0c0 (PIN_OUTPUT \| MUX_MODE0) /* dss_data10.dss_data10 */
	129	0x0c2 (PIN_OUTPUT \| MUX_MODE0) /* dss_data11.dss_data11 */
	130	0x0c4 (PIN_OUTPUT \| MUX_MODE0) /* dss_data12.dss_data12 */
	131	0x0c6 (PIN_OUTPUT \| MUX_MODE0) /* dss_data13.dss_data13 */
	132	0x0c8 (PIN_OUTPUT \| MUX_MODE0) /* dss_data14.dss_data14 */
	133	0x0ca (PIN_OUTPUT \| MUX_MODE0) /* dss_data15.dss_data15 */
	134	0x0cc (PIN_OUTPUT \| MUX_MODE0) /* dss_data16.dss_data16 */
	135	0x0ce (PIN_OUTPUT \| MUX_MODE0) /* dss_data17.dss_data17 */
	136	0x0d0 (PIN_OUTPUT \| MUX_MODE0) /* dss_data18.dss_data18 */
	137	0x0d2 (PIN_OUTPUT \| MUX_MODE0) /* dss_data19.dss_data19 */
	138	0x0d4 (PIN_OUTPUT \| MUX_MODE0) /* dss_data20.dss_data20 */
	139	0x0d6 (PIN_OUTPUT \| MUX_MODE0) /* dss_data21.dss_data21 */
	140	0x0d8 (PIN_OUTPUT \| MUX_MODE0) /* dss_data22.dss_data22 */
	141	0x0da (PIN_OUTPUT \| MUX_MODE0) /* dss_data23.dss_data23 */
	142	>;
	143	};
	144
	145	spi_gpio_pins: spi_gpio_pinmux {
	146	pinctrl-single,pins = <0x5a8 (PIN_OUTPUT \| MUX_MODE4) /* clk */
	147	0x5b6 (PIN_OUTPUT \| MUX_MODE4) /* cs */
	148	0x5b8 (PIN_OUTPUT \| MUX_MODE4) /* tx */
	149	0x5b4 (PIN_INPUT \| MUX_MODE4) /* rx */
	150	>;
	151	};
adfe1473 MB	152	};
	153
	154	&i2c1 {
	155	clock-frequency = <2600000>;
	156
	157	twl: twl@48 {
	158	reg = <0x48>;
	159	interrupts = <7>; /* SYS_NIRQ cascaded to intc */
	160	interrupt-parent = <&intc>;
	161	};
6764f648 N	162
	163	twl_audio: audio {
	164	compatible = "ti,twl4030-audio";
	165	codec {
	166	};
	167	};
adfe1473 MB	168	};
	169
	170	#include "twl4030.dtsi"
	171	#include "twl4030_omap3.dtsi"
	172
	173	&i2c2 {
	174	clock-frequency = <400000>;
	175
	176	/* pressure sensor */
	177	bmp085@77 {
	178	compatible = "bosch,bmp085";
	179	reg = <0x77>;
d26794c0 MB	180	interrupt-parent = <&gpio4>;
d26794c0 MB	181	interrupts = <17 IRQ_TYPE_EDGE_RISING>;
adfe1473 MB	182	};
adfe1473 MB	183
24d0bb88 N	184	/* accelerometer */
	185	bma180@41 {
	186	compatible = "bosch,bma180";
	187	reg = <0x41>;
	188	interrupt-parent = <&gpio3>;
	189	interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
	190	};
	191
adfe1473 MB	192	/* leds */
	193	tca6507@45 {
	194	compatible = "ti,tca6507";
	195	#address-cells = <1>;
	196	#size-cells = <0>;
	197	reg = <0x45>;
	198
	199	gta04_led0: red_aux@0 {
	200	label = "gta04:red:aux";
	201	reg = <0x0>;
	202	};
	203
	204	gta04_led1: green_aux@1 {
	205	label = "gta04:green:aux";
	206	reg = <0x1>;
	207	};
	208
	209	gta04_led3: red_power@3 {
	210	label = "gta04:red:power";
	211	reg = <0x3>;
	212	linux,default-trigger = "default-on";
	213	};
	214
	215	gta04_led4: green_power@4 {
	216	label = "gta04:green:power";
	217	reg = <0x4>;
	218	};
	219	};
32f2c393 N	220
	221	/* compass aka magnetometer */
	222	hmc5843@1e {
	223	compatible = "honeywell,hmc5843";
	224	reg = <0x1e>;
	225	};
9cbc03b4 MB	226
	227	/* touchscreen */
	228	tsc2007@48 {
	229	compatible = "ti,tsc2007";
	230	reg = <0x48>;
	231	interrupt-parent = <&gpio6>;
	232	interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
	233	gpios = <&gpio6 0 GPIO_ACTIVE_LOW>;
	234	ti,x-plate-ohms = <600>;
	235	};
adfe1473 MB	236	};
	237
	238	&i2c3 {
	239	clock-frequency = <100000>;
	240	};
	241
	242	&usb_otg_hs {
	243	interface-type = <0>;
	244	usb-phy = <&usb2_phy>;
d2afcf09 RQ	245	phys = <&usb2_phy>;
d2afcf09 RQ	246	phy-names = "usb2-phy";
adfe1473 MB	247	mode = <3>;
	248	power = <50>;
	249	};
	250
	251	&mmc1 {
	252	pinctrl-names = "default";
	253	pinctrl-0 = <&mmc1_pins>;
	254	vmmc-supply = <&vmmc1>;
adfe1473	255	bus-width = <4>;
2d6ac29e	256	ti,non-removable;
adfe1473 MB	257	};
	258
	259	&mmc2 {
5a13ba68 N	260	vmmc-supply = <&vaux4>;
	261	bus-width = <4>;
	262	ti,non-removable;
adfe1473 MB	263	};
	264
	265	&mmc3 {
	266	status = "disabled";
	267	};
	268
	269	&uart1 {
	270	pinctrl-names = "default";
	271	pinctrl-0 = <&uart1_pins>;
	272	};
	273
	274	&uart2 {
	275	pinctrl-names = "default";
	276	pinctrl-0 = <&uart2_pins>;
	277	};
	278
	279	&uart3 {
	280	pinctrl-names = "default";
	281	pinctrl-0 = <&uart3_pins>;
	282	};
	283
8bdc9e90 N	284	&charger {
	285	bb_uvolt = <3200000>;
	286	bb_uamp = <150>;
	287	};
5a13ba68 N	288
	289	&vaux4 {
	290	regulator-min-microvolt = <2800000>;
	291	regulator-max-microvolt = <3150000>;
	292	};
c2e138bc MB	293
	294	/* Needed to power the DPI pins */
	295	&vpll2 {
	296	regulator-always-on;
	297	};
	298
	299	&dss {
	300	pinctrl-names = "default";
	301	pinctrl-0 = < &dss_dpi_pins >;
	302
	303	status = "okay";
	304
	305	port {
	306	dpi_out: endpoint {
	307	remote-endpoint = <&lcd_in>;
	308	data-lines = <24>;
	309	};
	310	};
	311	};