Commit | Line | Data |
---|---|---|
f19ed8e0 EBS |
1 | /* |
2 | * Device Tree Source for IGEP COM MODULE Rev. G (TI OMAP AM/DM37x) | |
3 | * | |
56a31e54 | 4 | * Copyright (C) 2014 Javier Martinez Canillas <javier@osg.samsung.com> |
f19ed8e0 EBS |
5 | * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com> |
6 | * | |
7 | * This program is free software; you can redistribute it and/or modify | |
8 | * it under the terms of the GNU General Public License version 2 as | |
9 | * published by the Free Software Foundation. | |
10 | */ | |
11 | ||
12 | #include "omap3-igep0030-common.dtsi" | |
13 | ||
14 | / { | |
15 | model = "IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)"; | |
16 | compatible = "isee,omap3-igep0030-rev-g", "ti,omap36xx", "ti,omap3"; | |
17 | ||
18 | /* Regulator to trigger the WL_EN signal of the Wifi module */ | |
19 | lbep5clwmc_wlen: regulator-lbep5clwmc-wlen { | |
20 | compatible = "regulator-fixed"; | |
21 | regulator-name = "regulator-lbep5clwmc-wlen"; | |
22 | regulator-min-microvolt = <3300000>; | |
23 | regulator-max-microvolt = <3300000>; | |
24 | gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* gpio_139 - WL_EN */ | |
25 | enable-active-high; | |
26 | }; | |
27 | }; | |
28 | ||
29 | &omap3_pmx_core { | |
30 | lbep5clwmc_pins: pinmux_lbep5clwmc_pins { | |
31 | pinctrl-single,pins = < | |
32 | OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE4) /* sdmmc2_dat4.gpio_136 - W_IRQ */ | |
33 | OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 - BT_EN */ | |
34 | OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 - WL_EN */ | |
35 | >; | |
36 | }; | |
37 | ||
38 | leds_pins: pinmux_leds_pins { | |
39 | pinctrl-single,pins = < | |
40 | OMAP3_CORE1_IOPAD(0x21be, PIN_OUTPUT | MUX_MODE4) /* i2c2_scl.gpio_168 */ | |
41 | >; | |
42 | }; | |
43 | ||
44 | }; | |
45 | ||
46 | &i2c2 { | |
47 | status = "disabled"; | |
48 | }; | |
49 | ||
50 | &leds { | |
51 | pinctrl-names = "default"; | |
52 | pinctrl-0 = <&leds_pins &leds_core2_pins>; | |
53 | ||
54 | boot { | |
55 | label = "omap3:green:boot"; | |
56 | gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>; | |
57 | default-state = "on"; | |
58 | }; | |
59 | }; | |
60 | ||
61 | &mmc2 { | |
62 | pinctrl-names = "default"; | |
63 | pinctrl-0 = <&mmc2_pins &lbep5clwmc_pins>; | |
64 | vmmc-supply = <&lbep5clwmc_wlen>; | |
65 | bus-width = <4>; | |
66 | non-removable; | |
99f84cae EP |
67 | |
68 | #address-cells = <1>; | |
69 | #size-cells = <0>; | |
70 | wlcore: wlcore@2 { | |
71 | compatible = "ti,wl1835"; | |
72 | reg = <2>; | |
73 | interrupt-parent = <&gpio5>; | |
74 | interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; /* gpio 136 */ | |
75 | }; | |
f19ed8e0 | 76 | }; |