projects / deliverable / linux.git / blame
| Commit | Line | Data |
|---|---|---|
| bd5fc6fa TL |
1 | /* |
| 2 | * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ | |
| 3 | * | |
| 4 | * This program is free software; you can redistribute it and/or modify | |
| 5 | * it under the terms of the GNU General Public License version 2 as | |
| 6 | * published by the Free Software Foundation. | |
| 7 | */ | |
| 8 | /dts-v1/; | |
| 9 | ||
| 10 | #include "omap34xx.dtsi" | |
| 11 | #include "omap-gpmc-smsc911x.dtsi" | |
| 12 | ||
| 13 | / { | |
| 14 | model = "TI OMAP3430 LDP (Zoom1 Labrador)"; | |
| 15 | compatible = "ti,omap3-ldp", "ti,omap3"; | |
| 16 | ||
| 17 | memory { | |
| 18 | device_type = "memory"; | |
| 19 | reg = <0x80000000 0x8000000>; /* 128 MB */ | |
| 20 | }; | |
| 21 | ||
| 22 | cpus { | |
| 23 | cpu@0 { | |
| 24 | cpu0-supply = <&vcc>; | |
| 25 | }; | |
| 26 | }; | |
| 27 | ||
| 28 | gpio_keys { | |
| 29 | compatible = "gpio-keys"; | |
| 30 | pinctrl-names = "default"; | |
| 31 | pinctrl-0 = <&gpio_key_pins>; | |
| 32 | ||
| 33 | key_enter { | |
| 34 | label = "enter"; | |
| 35 | gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* gpio101 */ | |
| 36 | linux,code = <0x0107001c>; /* KEY_ENTER */ | |
| 37 | gpio-key,wakeup; | |
| 38 | }; | |
| 39 | ||
| 40 | key_f1 { | |
| 41 | label = "f1"; | |
| 42 | gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* gpio102 */ | |
| 43 | linux,code = <0x0303003b>; /* KEY_F1 */ | |
| 44 | gpio-key,wakeup; | |
| 45 | }; | |
| 46 | ||
| 47 | key_f2 { | |
| 48 | label = "f2"; | |
| 49 | gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* gpio103 */ | |
| 50 | linux,code = <0x0403003c>; /* KEY_F2 */ | |
| 51 | gpio-key,wakeup; | |
| 52 | }; | |
| 53 | ||
| 54 | key_f3 { | |
| 55 | label = "f3"; | |
| 56 | gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; /* gpio104 */ | |
| 57 | linux,code = <0x0503003d>; /* KEY_F3 */ | |
| 58 | gpio-key,wakeup; | |
| 59 | }; | |
| 60 | ||
| 61 | key_f4 { | |
| 62 | label = "f4"; | |
| 63 | gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; /* gpio105 */ | |
| 64 | linux,code = <0x0704003e>; /* KEY_F4 */ | |
| 65 | gpio-key,wakeup; | |
| 66 | }; | |
| 67 | ||
| 68 | key_left { | |
| 69 | label = "left"; | |
| 70 | gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* gpio106 */ | |
| 71 | linux,code = <0x04070069>; /* KEY_LEFT */ | |
| 72 | gpio-key,wakeup; | |
| 73 | }; | |
| 74 | ||
| 75 | key_right { | |
| 76 | label = "right"; | |
| 77 | gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* gpio107 */ | |
| 78 | linux,code = <0x0507006a>; /* KEY_RIGHT */ | |
| 79 | gpio-key,wakeup; | |
| 80 | }; | |
| 81 | ||
| 82 | key_up { | |
| 83 | label = "up"; | |
| 84 | gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; /* gpio108 */ | |
| 85 | linux,code = <0x06070067>; /* KEY_UP */ | |
| 86 | gpio-key,wakeup; | |
| 87 | }; | |
| 88 | ||
| 89 | key_down { | |
| 90 | label = "down"; | |
| 91 | gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* gpio109 */ | |
| 92 | linux,code = <0x0707006c>; /* KEY_DOWN */ | |
| 93 | gpio-key,wakeup; | |
| 94 | }; | |
| 95 | }; | |
| 96 | }; | |
| 97 | ||
| 98 | &gpmc { | |
| 99 | ranges = <0 0 0x00000000 0x01000000>, | |
| 100 | <1 0 0x08000000 0x01000000>; | |
| 101 | ||
| 102 | nand@0,0 { | |
| 103 | linux,mtd-name= "micron,nand"; | |
| 104 | reg = <0 0 0>; | |
| 105 | nand-bus-width = <16>; | |
| 106 | ti,nand-ecc-opt = "bch8"; | |
| 107 | ||
| 108 | gpmc,sync-clk-ps = <0>; | |
| 109 | gpmc,cs-on-ns = <0>; | |
| 110 | gpmc,cs-rd-off-ns = <44>; | |
| 111 | gpmc,cs-wr-off-ns = <44>; | |
| 112 | gpmc,adv-on-ns = <6>; | |
| 113 | gpmc,adv-rd-off-ns = <34>; | |
| 114 | gpmc,adv-wr-off-ns = <44>; | |
| 115 | gpmc,we-off-ns = <40>; | |
| 116 | gpmc,oe-off-ns = <54>; | |
| 117 | gpmc,access-ns = <64>; | |
| 118 | gpmc,rd-cycle-ns = <82>; | |
| 119 | gpmc,wr-cycle-ns = <82>; | |
| 120 | gpmc,wr-access-ns = <40>; | |
| 121 | gpmc,wr-data-mux-bus-ns = <0>; | |
| 122 | ||
| 123 | #address-cells = <1>; | |
| 124 | #size-cells = <1>; | |
| 125 | ||
| 126 | partition@0 { | |
| 127 | label = "X-Loader"; | |
| 128 | reg = <0 0x80000>; | |
| 129 | }; | |
| 130 | partition@80000 { | |
| 131 | label = "U-Boot"; | |
| 132 | reg = <0x80000 0x140000>; | |
| 133 | }; | |
| 134 | partition@1c0000 { | |
| 135 | label = "Environment"; | |
| 136 | reg = <0x1c0000 0x40000>; | |
| 137 | }; | |
| 138 | partition@200000 { | |
| 139 | label = "Kernel"; | |
| 140 | reg = <0x200000 0x1e00000>; | |
| 141 | }; | |
| 142 | partition@2000000 { | |
| 143 | label = "Filesystem"; | |
| 144 | reg = <0x2000000 0xe000000>; | |
| 145 | }; | |
| 146 | }; | |
| 147 | ||
| 148 | ethernet@gpmc { | |
| 149 | interrupt-parent = <&gpio5>; | |
| 150 | interrupts = <24 IRQ_TYPE_LEVEL_LOW>; | |
| 151 | reg = <1 0 0xff>; | |
| 152 | }; | |
| 153 | }; | |
| 154 | ||
| 155 | &i2c1 { | |
| 156 | clock-frequency = <2600000>; | |
| 157 | ||
| 158 | twl: twl@48 { | |
| 159 | reg = <0x48>; | |
| 160 | interrupts = <7>; /* SYS_NIRQ cascaded to intc */ | |
| 161 | interrupt-parent = <&intc>; | |
| 162 | }; | |
| 163 | }; | |
| 164 | ||
| 165 | #include "twl4030.dtsi" | |
| 166 | #include "twl4030_omap3.dtsi" | |
| 167 | ||
| 168 | &i2c2 { | |
| 169 | clock-frequency = <400000>; | |
| 170 | }; | |
| 171 | ||
| 172 | &i2c3 { | |
| 173 | clock-frequency = <400000>; | |
| 174 | }; | |
| 175 | ||
| 176 | &mmc1 { | |
| 177 | vmmc-supply = <&vmmc1>; | |
| 178 | bus-width = <4>; | |
| 179 | }; | |
| 180 | ||
| 181 | &omap3_pmx_core { | |
| 182 | gpio_key_pins: pinmux_gpio_key_pins { | |
| 183 | pinctrl-single,pins = < | |
| 184 | 0xea (PIN_INPUT | MUX_MODE4) /* cam_d2.gpio_101 */ | |
| 185 | 0xec (PIN_INPUT | MUX_MODE4) /* cam_d3.gpio_102 */ | |
| 186 | 0xee (PIN_INPUT | MUX_MODE4) /* cam_d4.gpio_103 */ | |
| 187 | 0xf0 (PIN_INPUT | MUX_MODE4) /* cam_d5.gpio_104 */ | |
| 188 | 0xf2 (PIN_INPUT | MUX_MODE4) /* cam_d6.gpio_105 */ | |
| 189 | 0xf4 (PIN_INPUT | MUX_MODE4) /* cam_d7.gpio_106 */ | |
| 190 | 0xf6 (PIN_INPUT | MUX_MODE4) /* cam_d8.gpio_107 */ | |
| 191 | 0xf8 (PIN_INPUT | MUX_MODE4) /* cam_d9.gpio_108 */ | |
| 192 | 0xfa (PIN_INPUT | MUX_MODE4) /* cam_d10.gpio_109 */ | |
| 193 | >; | |
| 194 | }; | |
| 195 | ||
| 196 | musb_pins: pinmux_musb_pins { | |
| 197 | pinctrl-single,pins = < | |
| 198 | 0x172 (PIN_INPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */ | |
| 199 | 0x17a (PIN_INPUT | MUX_MODE0) /* hsusb0_data0.hsusb0_data0 */ | |
| 200 | 0x17c (PIN_INPUT | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */ | |
| 201 | 0x17e (PIN_INPUT | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */ | |
| 202 | 0x180 (PIN_INPUT | MUX_MODE0) /* hsusb0_data3.hsusb0_data3 */ | |
| 203 | 0x182 (PIN_INPUT | MUX_MODE0) /* hsusb0_data4.hsusb0_data4 */ | |
| 204 | 0x184 (PIN_INPUT | MUX_MODE0) /* hsusb0_data5.hsusb0_data5 */ | |
| 205 | 0x186 (PIN_INPUT | MUX_MODE0) /* hsusb0_data6.hsusb0_data6 */ | |
| 206 | 0x188 (PIN_INPUT | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */ | |
| 207 | 0x176 (PIN_INPUT | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */ | |
| 208 | 0x178 (PIN_INPUT | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */ | |
| 209 | 0x174 (PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */ | |
| 210 | >; | |
| 211 | }; | |
| 212 | }; | |
| 213 | ||
| 214 | &usb_otg_hs { | |
| 215 | pinctrl-names = "default"; | |
| 216 | pinctrl-0 = <&musb_pins>; | |
| 217 | interface-type = <0>; | |
| 218 | usb-phy = <&usb2_phy>; | |
| 219 | mode = <3>; | |
| 220 | power = <50>; | |
| 221 | }; | |
| 222 | ||
| 223 | &vaux1 { | |
| 224 | /* Needed for ads7846 */ | |
| 225 | regulator-name = "vcc"; | |
| 226 | }; | |
| 227 | ||
| 228 | &vpll2 { | |
| 229 | /* Needed for DSS */ | |
| 230 | regulator-name = "vdds_dsi"; | |
| 231 | }; |