[deliverable/linux.git] / arch / arm / boot / dts / omap3-n900.dts

/*
 * Copyright (C) 2013 Pavel Machek <pavel@ucw.cz>
 * Copyright (C) 2013-2014 Aaro Koskinen <aaro.koskinen@iki.fi>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 (or later) as
 * published by the Free Software Foundation.
 */

/dts-v1/;

#include "omap34xx-hs.dtsi"

/ {
	model = "Nokia N900";
	compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3";

	cpus {
		cpu@0 {
			cpu0-supply = <&vcc>;
		};
	};

	memory {
		device_type = "memory";
		reg = <0x80000000 0x10000000>; /* 256 MB */
	};

	gpio_keys {
		compatible = "gpio-keys";

		camera_lens_cover {
			label = "Camera Lens Cover";
			gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */
			linux,input-type = <5>; /* EV_SW */
			linux,code = <0x09>; /* SW_CAMERA_LENS_COVER */
			gpio-key,wakeup;
		};

		camera_focus {
			label = "Camera Focus";
			gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */
			linux,code = <0x210>; /* KEY_CAMERA_FOCUS */
			gpio-key,wakeup;
		};

		camera_capture {
			label = "Camera Capture";
			gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */
			linux,code = <0xd4>; /* KEY_CAMERA */
			gpio-key,wakeup;
		};

		lock_button {
			label = "Lock Button";
			gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */
			linux,code = <0x98>; /* KEY_SCREENLOCK */
			gpio-key,wakeup;
		};

		keypad_slide {
			label = "Keypad Slide";
			gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */
			linux,input-type = <5>; /* EV_SW */
			linux,code = <0x0a>; /* SW_KEYPAD_SLIDE */
			gpio-key,wakeup;
		};

		proximity_sensor {
			label = "Proximity Sensor";
			gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */
			linux,input-type = <5>; /* EV_SW */
			linux,code = <0x0b>; /* SW_FRONT_PROXIMITY */
		};
	};

	isp1704: isp1704 {
		compatible = "nxp,isp1704";
		nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>;
		usb-phy = <&usb2_phy>;
	};

	tv: connector {
		compatible = "composite-connector";
		label = "tv";

		port {
			tv_connector_in: endpoint {
				remote-endpoint = <&venc_out>;
			};
		};
	};
};

&omap3_pmx_core {
	pinctrl-names = "default";

	uart2_pins: pinmux_uart2_pins {
		pinctrl-single,pins = <
			0x14a (PIN_INPUT | MUX_MODE0)		/* uart2_rx */
			0x148 (PIN_OUTPUT | MUX_MODE0)		/* uart2_tx */
		>;
	};

	uart3_pins: pinmux_uart3_pins {
		pinctrl-single,pins = <
			0x16e (PIN_INPUT | MUX_MODE0)		/* uart3_rx */
			0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx */
		>;
	};

	i2c1_pins: pinmux_i2c1_pins {
		pinctrl-single,pins = <
			0x18a (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
		>;
	};

	i2c2_pins: pinmux_i2c2_pins {
		pinctrl-single,pins = <
			0x18e (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
			0x190 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
		>;
	};

	i2c3_pins: pinmux_i2c3_pins {
		pinctrl-single,pins = <
			0x192 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
			0x194 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
		>;
	};

	mmc1_pins: pinmux_mmc1_pins {
		pinctrl-single,pins = <
			0x114 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk */
			0x116 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd */
			0x118 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0 */
			0x11a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1 */
			0x11c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2 */
			0x11e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3 */
		>;
	};

	mmc2_pins: pinmux_mmc2_pins {
		pinctrl-single,pins = <
			0x128 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk */
			0x12a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd */
			0x12c (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc2_dat0 */
			0x12e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1 */
			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2 */
			0x132 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3 */
			0x134 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat4 */
			0x136 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat5 */
			0x138 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat6 */
			0x13a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat7 */
		>;
	};

	acx565akm_pins: pinmux_acx565akm_pins {
		pinctrl-single,pins = <
			0x0d4 (PIN_OUTPUT | MUX_MODE4)		/* RX51_LCD_RESET_GPIO */
		>;
	};

	dss_sdi_pins: pinmux_dss_sdi_pins {
		pinctrl-single,pins = <
			0x0c0 (PIN_OUTPUT | MUX_MODE1)   /* dss_data10.sdi_dat1n */
			0x0c2 (PIN_OUTPUT | MUX_MODE1)   /* dss_data11.sdi_dat1p */
			0x0c4 (PIN_OUTPUT | MUX_MODE1)   /* dss_data12.sdi_dat2n */
			0x0c6 (PIN_OUTPUT | MUX_MODE1)   /* dss_data13.sdi_dat2p */

			0x0d8 (PIN_OUTPUT | MUX_MODE1)   /* dss_data22.sdi_clkp */
			0x0da (PIN_OUTPUT | MUX_MODE1)   /* dss_data23.sdi_clkn */
		>;
	};
};

&i2c1 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c1_pins>;

	clock-frequency = <2200000>;

	twl: twl@48 {
		reg = <0x48>;
		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
		interrupt-parent = <&intc>;
	};
};

#include "twl4030.dtsi"
#include "twl4030_omap3.dtsi"

&vaux1 {
	regulator-name = "V28";
	regulator-min-microvolt = <2800000>;
	regulator-max-microvolt = <2800000>;
	regulator-always-on; /* due battery cover sensor */
};

&vaux2 {
	regulator-name = "VCSI";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
};

&vaux3 {
	regulator-name = "VMMC2_30";
	regulator-min-microvolt = <2800000>;
	regulator-max-microvolt = <3000000>;
};

&vaux4 {
	regulator-name = "VCAM_ANA_28";
	regulator-min-microvolt = <2800000>;
	regulator-max-microvolt = <2800000>;
};

&vmmc1 {
	regulator-name = "VMMC1";
	regulator-min-microvolt = <1850000>;
	regulator-max-microvolt = <3150000>;
};

&vmmc2 {
	regulator-name = "V28_A";
	regulator-min-microvolt = <2800000>;
	regulator-max-microvolt = <3000000>;
	regulator-always-on; /* due VIO leak to AIC34 VDDs */
};

&vpll1 {
	regulator-name = "VPLL";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
	regulator-always-on;
};

&vpll2 {
	regulator-name = "VSDI_CSI";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
	regulator-always-on;
};

&vsim {
	regulator-name = "VMMC2_IO_18";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
};

&vio {
	regulator-name = "VIO";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;

};

&vintana1 {
	regulator-name = "VINTANA1";
	/* fixed to 1500000 */
	regulator-always-on;
};

&vintana2 {
	regulator-name = "VINTANA2";
	regulator-min-microvolt = <2750000>;
	regulator-max-microvolt = <2750000>;
	regulator-always-on;
};

&vintdig {
	regulator-name = "VINTDIG";
	/* fixed to 1500000 */
	regulator-always-on;
};

&twl {
	twl_audio: audio {
		compatible = "ti,twl4030-audio";
		ti,enable-vibra = <1>;
	};
};

&twl_keypad {
	linux,keymap = < 0x00000010 /* KEY_Q */
			 0x00010018 /* KEY_O */
			 0x00020019 /* KEY_P */
			 0x00030033 /* KEY_COMMA */
			 0x0004000e /* KEY_BACKSPACE */
			 0x0006001e /* KEY_A */
			 0x0007001f /* KEY_S */

			 0x01000011 /* KEY_W */
			 0x01010020 /* KEY_D */
			 0x01020021 /* KEY_F */
			 0x01030022 /* KEY_G */
			 0x01040023 /* KEY_H */
			 0x01050024 /* KEY_J */
			 0x01060025 /* KEY_K */
			 0x01070026 /* KEY_L */

			 0x02000012 /* KEY_E */
			 0x02010034 /* KEY_DOT */
			 0x02020067 /* KEY_UP */
			 0x0203001c /* KEY_ENTER */
			 0x0205002c /* KEY_Z */
			 0x0206002d /* KEY_X */
			 0x0207002e /* KEY_C */
			 0x02080043 /* KEY_F9 */

			 0x03000013 /* KEY_R */
			 0x0301002f /* KEY_V */
			 0x03020030 /* KEY_B */
			 0x03030031 /* KEY_N */
			 0x03040032 /* KEY_M */
			 0x03050039 /* KEY_SPACE */
			 0x03060039 /* KEY_SPACE */
			 0x03070069 /* KEY_LEFT */

			 0x04000014 /* KEY_T */
			 0x0401006c /* KEY_DOWN */
			 0x0402006a /* KEY_RIGHT */
			 0x0404001d /* KEY_LEFTCTRL */
			 0x04050064 /* KEY_RIGHTALT */
			 0x0406002a /* KEY_LEFTSHIFT */
			 0x04080044 /* KEY_F10 */

			 0x05000015 /* KEY_Y */
			 0x05080057 /* KEY_F11 */

			 0x06000016 /* KEY_U */

			 0x07000017 /* KEY_I */
			 0x07010041 /* KEY_F7 */
			 0x07020042 /* KEY_F8 */
			 >;
};

&twl_gpio {
	ti,pullups	= <0x0>;
	ti,pulldowns	= <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */
};

&i2c2 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c2_pins>;

	clock-frequency = <100000>;

	tlv320aic3x: tlv320aic3x@18 {
		compatible = "ti,tlv320aic3x";
		reg = <0x18>;
		gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
		ai3x-gpio-func = <
			0 /* AIC3X_GPIO1_FUNC_DISABLED */
			5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
		>;

		AVDD-supply = <&vmmc2>;
		DRVDD-supply = <&vmmc2>;
		IOVDD-supply = <&vio>;
		DVDD-supply = <&vio>;
	};

	tlv320aic3x_aux: tlv320aic3x@19 {
		compatible = "ti,tlv320aic3x";
		reg = <0x19>;
		gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */

		AVDD-supply = <&vmmc2>;
		DRVDD-supply = <&vmmc2>;
		IOVDD-supply = <&vio>;
		DVDD-supply = <&vio>;
	};

	tsl2563: tsl2563@29 {
		compatible = "amstaos,tsl2563";
		reg = <0x29>;

		amstaos,cover-comp-gain = <16>;
	};

	lp5523: lp5523@32 {
		compatible = "national,lp5523";
		reg = <0x32>;
		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
		enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */

		chan0 {
			chan-name = "lp5523:kb1";
			led-cur = /bits/ 8 <50>;
			max-cur = /bits/ 8 <100>;
		};

		chan1 {
			chan-name = "lp5523:kb2";
			led-cur = /bits/ 8 <50>;
			max-cur = /bits/ 8 <100>;
		};

		chan2 {
			chan-name = "lp5523:kb3";
			led-cur = /bits/ 8 <50>;
			max-cur = /bits/ 8 <100>;
		};

		chan3 {
			chan-name = "lp5523:kb4";
			led-cur = /bits/ 8 <50>;
			max-cur = /bits/ 8 <100>;
		};

		chan4 {
			chan-name = "lp5523:b";
			led-cur = /bits/ 8 <50>;
			max-cur = /bits/ 8 <100>;
		};

		chan5 {
			chan-name = "lp5523:g";
			led-cur = /bits/ 8 <50>;
			max-cur = /bits/ 8 <100>;
		};

		chan6 {
			chan-name = "lp5523:r";
			led-cur = /bits/ 8 <50>;
			max-cur = /bits/ 8 <100>;
		};

		chan7 {
			chan-name = "lp5523:kb5";
			led-cur = /bits/ 8 <50>;
			max-cur = /bits/ 8 <100>;
		};

		chan8 {
			chan-name = "lp5523:kb6";
			led-cur = /bits/ 8 <50>;
			max-cur = /bits/ 8 <100>;
		};
	};

	bq27200: bq27200@55 {
		compatible = "ti,bq27200";
		reg = <0x55>;
	};

	tpa6130a2: tpa6130a2@60 {
		compatible = "ti,tpa6130a2";
		reg = <0x60>;

		Vdd-supply = <&vmmc2>;

		power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; /* 98 */
	};

	bq24150a: bq24150a@6b {
		compatible = "ti,bq24150a";
		reg = <0x6b>;

		ti,current-limit = <100>;
		ti,weak-battery-voltage = <3400>;
		ti,battery-regulation-voltage = <4200>;
		ti,charge-current = <650>;
		ti,termination-current = <100>;
		ti,resistor-sense = <68>;

		ti,usb-charger-detection = <&isp1704>;
	};
};

&i2c3 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c3_pins>;

	clock-frequency = <400000>;
};

&mmc1 {
	pinctrl-names = "default";
	pinctrl-0 = <&mmc1_pins>;
	vmmc-supply = <&vmmc1>;
	bus-width = <4>;
	cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
};

/* most boards use vaux3, only some old versions use vmmc2 instead */
&mmc2 {
	pinctrl-names = "default";
	pinctrl-0 = <&mmc2_pins>;
	vmmc-supply = <&vaux3>;
	vmmc_aux-supply = <&vsim>;
	bus-width = <8>;
	non-removable;
};

&mmc3 {
	status = "disabled";
};

&gpmc {
	ranges = <0 0 0x04000000 0x10000000>; /* 256MB */

	/* gpio-irq for dma: 65 */

	onenand@0,0 {
		#address-cells = <1>;
		#size-cells = <1>;
		reg = <0 0 0x10000000>;

		gpmc,sync-read;
		gpmc,sync-write;
		gpmc,burst-length = <16>;
		gpmc,burst-read;
		gpmc,burst-wrap;
		gpmc,burst-write;
		gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */
		gpmc,mux-add-data = <2>; /* GPMC_MUX_AD */
		gpmc,cs-on-ns = <0>;
		gpmc,cs-rd-off-ns = <87>;
		gpmc,cs-wr-off-ns = <87>;
		gpmc,adv-on-ns = <0>;
		gpmc,adv-rd-off-ns = <10>;
		gpmc,adv-wr-off-ns = <10>;
		gpmc,oe-on-ns = <15>;
		gpmc,oe-off-ns = <87>;
		gpmc,we-on-ns = <0>;
		gpmc,we-off-ns = <87>;
		gpmc,rd-cycle-ns = <112>;
		gpmc,wr-cycle-ns = <112>;
		gpmc,access-ns = <81>;
		gpmc,page-burst-access-ns = <15>;
		gpmc,bus-turnaround-ns = <0>;
		gpmc,cycle2cycle-delay-ns = <0>;
		gpmc,wait-monitoring-ns = <0>;
		gpmc,clk-activation-ns = <5>;
		gpmc,wr-data-mux-bus-ns = <30>;
		gpmc,wr-access-ns = <81>;
		gpmc,sync-clk-ps = <15000>;

		/*
		 * MTD partition table corresponding to Nokia's
		 * Maemo 5 (Fremantle) release.
		 */
		partition@0 {
			label = "bootloader";
			reg = <0x00000000 0x00020000>;
			read-only;
		};
		partition@1 {
			label = "config";
			reg = <0x00020000 0x00060000>;
		};
		partition@2 {
			label = "log";
			reg = <0x00080000 0x00040000>;
		};
		partition@3 {
			label = "kernel";
			reg = <0x000c0000 0x00200000>;
		};
		partition@4 {
			label = "initfs";
			reg = <0x002c0000 0x00200000>;
		};
		partition@5 {
			label = "rootfs";
			reg = <0x004c0000 0x0fb40000>;
		};
	};
};

&mcspi1 {
	/*
	 * For some reason, touchscreen is necessary for screen to work at
	 * all on real hw. It works well without it on emulator.
	 *
	 * Also... order in the device tree actually matters here.
	 */
	tsc2005@0 {
		compatible = "tsc2005";
		spi-max-frequency = <6000000>;
		reg = <0>;
	};

	acx565akm@2 {
		compatible = "sony,acx565akm";
		spi-max-frequency = <6000000>;
		reg = <2>;

		pinctrl-names = "default";
		pinctrl-0 = <&acx565akm_pins>;

		label = "lcd";
		reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */

		port {
			lcd_in: endpoint {
				remote-endpoint = <&sdi_out>;
			};
		};
	};
};

&usb_otg_hs {
	interface-type = <0>;
	usb-phy = <&usb2_phy>;
	phys = <&usb2_phy>;
	phy-names = "usb2-phy";
	mode = <2>;
	power = <50>;
};

&uart1 {
	status = "disabled";
};

&uart2 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart2_pins>;
};

&uart3 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart3_pins>;
};

&dss {
	status = "ok";

	pinctrl-names = "default";
	pinctrl-0 = <&dss_sdi_pins>;

	vdds_sdi-supply = <&vaux1>;

	ports {
		#address-cells = <1>;
		#size-cells = <0>;

		port@1 {
			reg = <1>;

			sdi_out: endpoint {
				remote-endpoint = <&lcd_in>;
				datapairs = <2>;
			};
		};
	};
};

&venc {
	status = "ok";

	vdda-supply = <&vdac>;

	port {
		venc_out: endpoint {
			remote-endpoint = <&tv_connector_in>;
			ti,channels = <1>;
		};
	};
};
Commit	Line	Data
a4d4b153 PM	1	/*
a4d4b153 PM	2	* Copyright (C) 2013 Pavel Machek <pavel@ucw.cz>
c3580bc1	3	* Copyright (C) 2013-2014 Aaro Koskinen <aaro.koskinen@iki.fi>
a4d4b153 PM	4	*
	5	* This program is free software; you can redistribute it and/or modify
	6	* it under the terms of the GNU General Public License version 2 (or later) as
	7	* published by the Free Software Foundation.
	8	*/
	9
	10	/dts-v1/;
	11
f2e2c9d9	12	#include "omap34xx-hs.dtsi"
a4d4b153 PM	13
	14	/ {
	15	model = "Nokia N900";
c3580bc1	16	compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3";
a4d4b153 PM	17
	18	cpus {
	19	cpu@0 {
	20	cpu0-supply = <&vcc>;
	21	};
	22	};
	23
	24	memory {
	25	device_type = "memory";
	26	reg = <0x80000000 0x10000000>; /* 256 MB */
	27	};
	28
3931c839 SR	29	gpio_keys {
	30	compatible = "gpio-keys";
	31
	32	camera_lens_cover {
	33	label = "Camera Lens Cover";
	34	gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */
	35	linux,input-type = <5>; /* EV_SW */
	36	linux,code = <0x09>; /* SW_CAMERA_LENS_COVER */
	37	gpio-key,wakeup;
	38	};
	39
	40	camera_focus {
	41	label = "Camera Focus";
	42	gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */
	43	linux,code = <0x210>; /* KEY_CAMERA_FOCUS */
	44	gpio-key,wakeup;
	45	};
	46
	47	camera_capture {
	48	label = "Camera Capture";
	49	gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */
	50	linux,code = <0xd4>; /* KEY_CAMERA */
	51	gpio-key,wakeup;
	52	};
	53
	54	lock_button {
	55	label = "Lock Button";
	56	gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */
	57	linux,code = <0x98>; /* KEY_SCREENLOCK */
	58	gpio-key,wakeup;
	59	};
	60
	61	keypad_slide {
	62	label = "Keypad Slide";
	63	gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */
	64	linux,input-type = <5>; /* EV_SW */
	65	linux,code = <0x0a>; /* SW_KEYPAD_SLIDE */
	66	gpio-key,wakeup;
	67	};
	68
	69	proximity_sensor {
	70	label = "Proximity Sensor";
	71	gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */
	72	linux,input-type = <5>; /* EV_SW */
	73	linux,code = <0x0b>; /* SW_FRONT_PROXIMITY */
	74	};
	75	};
	76
e17337a2 SR	77	isp1704: isp1704 {
	78	compatible = "nxp,isp1704";
	79	nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>;
	80	usb-phy = <&usb2_phy>;
	81	};
1133420f TV	82
	83	tv: connector {
	84	compatible = "composite-connector";
	85	label = "tv";
	86
	87	port {
	88	tv_connector_in: endpoint {
	89	remote-endpoint = <&venc_out>;
	90	};
	91	};
	92	};
a4d4b153 PM	93	};
a4d4b153 PM	94
ac888a88 SR	95	&omap3_pmx_core {
	96	pinctrl-names = "default";
	97
7a89eecf SR	98	uart2_pins: pinmux_uart2_pins {
	99	pinctrl-single,pins = <
	100	0x14a (PIN_INPUT \| MUX_MODE0) /* uart2_rx */
	101	0x148 (PIN_OUTPUT \| MUX_MODE0) /* uart2_tx */
	102	>;
	103	};
	104
	105	uart3_pins: pinmux_uart3_pins {
	106	pinctrl-single,pins = <
	107	0x16e (PIN_INPUT \| MUX_MODE0) /* uart3_rx */
	108	0x170 (PIN_OUTPUT \| MUX_MODE0) /* uart3_tx */
	109	>;
	110	};
	111
ac888a88 SR	112	i2c1_pins: pinmux_i2c1_pins {
	113	pinctrl-single,pins = <
	114	0x18a (PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c1_scl */
	115	0x18c (PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c1_sda */
	116	>;
	117	};
	118
	119	i2c2_pins: pinmux_i2c2_pins {
	120	pinctrl-single,pins = <
	121	0x18e (PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c2_scl */
	122	0x190 (PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c2_sda */
	123	>;
	124	};
	125
	126	i2c3_pins: pinmux_i2c3_pins {
	127	pinctrl-single,pins = <
	128	0x192 (PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c3_scl */
	129	0x194 (PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c3_sda */
	130	>;
	131	};
f1751cff SR	132
	133	mmc1_pins: pinmux_mmc1_pins {
	134	pinctrl-single,pins = <
	135	0x114 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_clk */
	136	0x116 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_cmd */
	137	0x118 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_dat0 */
	138	0x11a (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_dat1 */
	139	0x11c (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_dat2 */
	140	0x11e (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_dat3 */
	141	>;
	142	};
d1e6f516	143
edd5eb4e TL	144	mmc2_pins: pinmux_mmc2_pins {
	145	pinctrl-single,pins = <
	146	0x128 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_clk */
	147	0x12a (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_cmd */
	148	0x12c (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_dat0 */
	149	0x12e (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_dat1 */
	150	0x130 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_dat2 */
	151	0x132 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_dat3 */
	152	0x134 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_dat4 */
	153	0x136 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_dat5 */
	154	0x138 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_dat6 */
	155	0x13a (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_dat7 */
	156	>;
	157	};
	158
1133420f	159	acx565akm_pins: pinmux_acx565akm_pins {
d1e6f516 SR	160	pinctrl-single,pins = <
	161	0x0d4 (PIN_OUTPUT \| MUX_MODE4) /* RX51_LCD_RESET_GPIO */
	162	>;
	163	};
1133420f TV	164
	165	dss_sdi_pins: pinmux_dss_sdi_pins {
	166	pinctrl-single,pins = <
	167	0x0c0 (PIN_OUTPUT \| MUX_MODE1) /* dss_data10.sdi_dat1n */
	168	0x0c2 (PIN_OUTPUT \| MUX_MODE1) /* dss_data11.sdi_dat1p */
	169	0x0c4 (PIN_OUTPUT \| MUX_MODE1) /* dss_data12.sdi_dat2n */
	170	0x0c6 (PIN_OUTPUT \| MUX_MODE1) /* dss_data13.sdi_dat2p */
	171
	172	0x0d8 (PIN_OUTPUT \| MUX_MODE1) /* dss_data22.sdi_clkp */
	173	0x0da (PIN_OUTPUT \| MUX_MODE1) /* dss_data23.sdi_clkn */
	174	>;
	175	};
ac888a88 SR	176	};
ac888a88 SR	177
a4d4b153	178	&i2c1 {
ac888a88 SR	179	pinctrl-names = "default";
	180	pinctrl-0 = <&i2c1_pins>;
	181
a4d4b153 PM	182	clock-frequency = <2200000>;
	183
	184	twl: twl@48 {
	185	reg = <0x48>;
	186	interrupts = <7>; /* SYS_NIRQ cascaded to intc */
	187	interrupt-parent = <&intc>;
	188	};
	189	};
	190
	191	#include "twl4030.dtsi"
ac888a88	192	#include "twl4030_omap3.dtsi"
a4d4b153	193
9cdbbadd SR	194	&vaux1 {
	195	regulator-name = "V28";
	196	regulator-min-microvolt = <2800000>;
	197	regulator-max-microvolt = <2800000>;
	198	regulator-always-on; /* due battery cover sensor */
	199	};
	200
	201	&vaux2 {
	202	regulator-name = "VCSI";
	203	regulator-min-microvolt = <1800000>;
	204	regulator-max-microvolt = <1800000>;
	205	};
	206
	207	&vaux3 {
	208	regulator-name = "VMMC2_30";
	209	regulator-min-microvolt = <2800000>;
	210	regulator-max-microvolt = <3000000>;
	211	};
	212
	213	&vaux4 {
	214	regulator-name = "VCAM_ANA_28";
	215	regulator-min-microvolt = <2800000>;
	216	regulator-max-microvolt = <2800000>;
	217	};
	218
	219	&vmmc1 {
	220	regulator-name = "VMMC1";
	221	regulator-min-microvolt = <1850000>;
	222	regulator-max-microvolt = <3150000>;
	223	};
	224
	225	&vmmc2 {
	226	regulator-name = "V28_A";
	227	regulator-min-microvolt = <2800000>;
	228	regulator-max-microvolt = <3000000>;
	229	regulator-always-on; /* due VIO leak to AIC34 VDDs */
	230	};
	231
	232	&vpll1 {
	233	regulator-name = "VPLL";
	234	regulator-min-microvolt = <1800000>;
	235	regulator-max-microvolt = <1800000>;
	236	regulator-always-on;
	237	};
	238
	239	&vpll2 {
	240	regulator-name = "VSDI_CSI";
	241	regulator-min-microvolt = <1800000>;
	242	regulator-max-microvolt = <1800000>;
	243	regulator-always-on;
	244	};
	245
	246	&vsim {
	247	regulator-name = "VMMC2_IO_18";
	248	regulator-min-microvolt = <1800000>;
	249	regulator-max-microvolt = <1800000>;
	250	};
	251
	252	&vio {
	253	regulator-name = "VIO";
	254	regulator-min-microvolt = <1800000>;
	255	regulator-max-microvolt = <1800000>;
	256
	257	};
258
259	&vintana1 {
260	regulator-name = "VINTANA1";
261	/* fixed to 1500000 */
262	regulator-always-on;
263	};
264
265	&vintana2 {
266	regulator-name = "VINTANA2";
267	regulator-min-microvolt = <2750000>;
268	regulator-max-microvolt = <2750000>;
269	regulator-always-on;
270	};
271
272	&vintdig {
273	regulator-name = "VINTDIG";
274	/* fixed to 1500000 */
275	regulator-always-on;
276	};
277
06ba7a61 SR	278	&twl {
	279	twl_audio: audio {
	280	compatible = "ti,twl4030-audio";
	281	ti,enable-vibra = <1>;
	282	};
	283	};
	284
85c215f3 SR	285	&twl_keypad {
	286	linux,keymap = < 0x00000010 /* KEY_Q */
	287	0x00010018 /* KEY_O */
	288	0x00020019 /* KEY_P */
	289	0x00030033 /* KEY_COMMA */
	290	0x0004000e /* KEY_BACKSPACE */
	291	0x0006001e /* KEY_A */
	292	0x0007001f /* KEY_S */
	293
	294	0x01000011 /* KEY_W */
	295	0x01010020 /* KEY_D */
	296	0x01020021 /* KEY_F */
	297	0x01030022 /* KEY_G */
	298	0x01040023 /* KEY_H */
	299	0x01050024 /* KEY_J */
	300	0x01060025 /* KEY_K */
	301	0x01070026 /* KEY_L */
	302
	303	0x02000012 /* KEY_E */
	304	0x02010034 /* KEY_DOT */
	305	0x02020067 /* KEY_UP */
	306	0x0203001c /* KEY_ENTER */
	307	0x0205002c /* KEY_Z */
	308	0x0206002d /* KEY_X */
	309	0x0207002e /* KEY_C */
	310	0x02080043 /* KEY_F9 */
	311
	312	0x03000013 /* KEY_R */
	313	0x0301002f /* KEY_V */
	314	0x03020030 /* KEY_B */
	315	0x03030031 /* KEY_N */
	316	0x03040032 /* KEY_M */
	317	0x03050039 /* KEY_SPACE */
	318	0x03060039 /* KEY_SPACE */
	319	0x03070069 /* KEY_LEFT */
	320
	321	0x04000014 /* KEY_T */
	322	0x0401006c /* KEY_DOWN */
	323	0x0402006a /* KEY_RIGHT */
	324	0x0404001d /* KEY_LEFTCTRL */
	325	0x04050064 /* KEY_RIGHTALT */
	326	0x0406002a /* KEY_LEFTSHIFT */
	327	0x04080044 /* KEY_F10 */
	328
	329	0x05000015 /* KEY_Y */
	330	0x05080057 /* KEY_F11 */
	331
	332	0x06000016 /* KEY_U */
	333
	334	0x07000017 /* KEY_I */
	335	0x07010041 /* KEY_F7 */
	336	0x07020042 /* KEY_F8 */
	337	>;
	338	};
	339
a4d4b153 PM	340	&twl_gpio {
	341	ti,pullups = <0x0>;
	342	ti,pulldowns = <0x03ff3f>; /* BIT(0..5) \| BIT(8..17) */
	343	};
	344
	345	&i2c2 {
ac888a88 SR	346	pinctrl-names = "default";
	347	pinctrl-0 = <&i2c2_pins>;
	348
48fc9864	349	clock-frequency = <100000>;
b2b9b258	350
14e3e295 SR	351	tlv320aic3x: tlv320aic3x@18 {
	352	compatible = "ti,tlv320aic3x";
	353	reg = <0x18>;
	354	gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
	355	ai3x-gpio-func = <
	356	0 /* AIC3X_GPIO1_FUNC_DISABLED */
	357	5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
	358	>;
	359
	360	AVDD-supply = <&vmmc2>;
	361	DRVDD-supply = <&vmmc2>;
	362	IOVDD-supply = <&vio>;
	363	DVDD-supply = <&vio>;
	364	};
	365
	366	tlv320aic3x_aux: tlv320aic3x@19 {
	367	compatible = "ti,tlv320aic3x";
	368	reg = <0x19>;
	369	gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
	370
	371	AVDD-supply = <&vmmc2>;
	372	DRVDD-supply = <&vmmc2>;
	373	IOVDD-supply = <&vio>;
	374	DVDD-supply = <&vio>;
	375	};
	376
12f2f873 SR	377	tsl2563: tsl2563@29 {
	378	compatible = "amstaos,tsl2563";
	379	reg = <0x29>;
	380
	381	amstaos,cover-comp-gain = <16>;
	382	};
	383
a0bf1f3e SR	384	lp5523: lp5523@32 {
	385	compatible = "national,lp5523";
	386	reg = <0x32>;
	387	clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
	388	enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
	389
	390	chan0 {
	391	chan-name = "lp5523:kb1";
	392	led-cur = /bits/ 8 <50>;
	393	max-cur = /bits/ 8 <100>;
	394	};
	395
	396	chan1 {
	397	chan-name = "lp5523:kb2";
	398	led-cur = /bits/ 8 <50>;
	399	max-cur = /bits/ 8 <100>;
	400	};
	401
	402	chan2 {
	403	chan-name = "lp5523:kb3";
	404	led-cur = /bits/ 8 <50>;
	405	max-cur = /bits/ 8 <100>;
	406	};
	407
	408	chan3 {
	409	chan-name = "lp5523:kb4";
	410	led-cur = /bits/ 8 <50>;
	411	max-cur = /bits/ 8 <100>;
	412	};
	413
	414	chan4 {
	415	chan-name = "lp5523:b";
	416	led-cur = /bits/ 8 <50>;
	417	max-cur = /bits/ 8 <100>;
	418	};
	419
	420	chan5 {
	421	chan-name = "lp5523:g";
	422	led-cur = /bits/ 8 <50>;
	423	max-cur = /bits/ 8 <100>;
	424	};
	425
	426	chan6 {
	427	chan-name = "lp5523:r";
	428	led-cur = /bits/ 8 <50>;
	429	max-cur = /bits/ 8 <100>;
	430	};
	431
	432	chan7 {
	433	chan-name = "lp5523:kb5";
	434	led-cur = /bits/ 8 <50>;
	435	max-cur = /bits/ 8 <100>;
	436	};
	437
	438	chan8 {
	439	chan-name = "lp5523:kb6";
	440	led-cur = /bits/ 8 <50>;
	441	max-cur = /bits/ 8 <100>;
	442	};
	443	};
	444
b2b9b258 SR	445	bq27200: bq27200@55 {
	446	compatible = "ti,bq27200";
	447	reg = <0x55>;
	448	};
9e2367c8 SR	449
	450	tpa6130a2: tpa6130a2@60 {
	451	compatible = "ti,tpa6130a2";
	452	reg = <0x60>;
	453
	454	Vdd-supply = <&vmmc2>;
	455
	456	power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; /* 98 */
	457	};
334a09c8 SR	458
	459	bq24150a: bq24150a@6b {
	460	compatible = "ti,bq24150a";
	461	reg = <0x6b>;
	462
	463	ti,current-limit = <100>;
	464	ti,weak-battery-voltage = <3400>;
	465	ti,battery-regulation-voltage = <4200>;
	466	ti,charge-current = <650>;
	467	ti,termination-current = <100>;
	468	ti,resistor-sense = <68>;
	469
	470	ti,usb-charger-detection = <&isp1704>;
	471	};
a4d4b153 PM	472	};
	473
	474	&i2c3 {
ac888a88 SR	475	pinctrl-names = "default";
	476	pinctrl-0 = <&i2c3_pins>;
	477
48fc9864	478	clock-frequency = <400000>;
a4d4b153 PM	479	};
	480
	481	&mmc1 {
f1751cff SR	482	pinctrl-names = "default";
	483	pinctrl-0 = <&mmc1_pins>;
	484	vmmc-supply = <&vmmc1>;
	485	bus-width = <4>;
	486	cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
a4d4b153 PM	487	};
a4d4b153 PM	488
edd5eb4e	489	/* most boards use vaux3, only some old versions use vmmc2 instead */
a4d4b153	490	&mmc2 {
edd5eb4e TL	491	pinctrl-names = "default";
	492	pinctrl-0 = <&mmc2_pins>;
	493	vmmc-supply = <&vaux3>;
	494	vmmc_aux-supply = <&vsim>;
	495	bus-width = <8>;
	496	non-removable;
a4d4b153 PM	497	};
	498
	499	&mmc3 {
	500	status = "disabled";
	501	};
	502
8699d2dd SR	503	&gpmc {
	504	ranges = <0 0 0x04000000 0x10000000>; /* 256MB */
	505
	506	/* gpio-irq for dma: 65 */
	507
	508	onenand@0,0 {
	509	#address-cells = <1>;
	510	#size-cells = <1>;
	511	reg = <0 0 0x10000000>;
	512
	513	gpmc,sync-read;
	514	gpmc,sync-write;
	515	gpmc,burst-length = <16>;
	516	gpmc,burst-read;
	517	gpmc,burst-wrap;
	518	gpmc,burst-write;
	519	gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */
	520	gpmc,mux-add-data = <2>; /* GPMC_MUX_AD */
	521	gpmc,cs-on-ns = <0>;
	522	gpmc,cs-rd-off-ns = <87>;
	523	gpmc,cs-wr-off-ns = <87>;
	524	gpmc,adv-on-ns = <0>;
	525	gpmc,adv-rd-off-ns = <10>;
	526	gpmc,adv-wr-off-ns = <10>;
	527	gpmc,oe-on-ns = <15>;
	528	gpmc,oe-off-ns = <87>;
	529	gpmc,we-on-ns = <0>;
	530	gpmc,we-off-ns = <87>;
	531	gpmc,rd-cycle-ns = <112>;
	532	gpmc,wr-cycle-ns = <112>;
	533	gpmc,access-ns = <81>;
	534	gpmc,page-burst-access-ns = <15>;
	535	gpmc,bus-turnaround-ns = <0>;
	536	gpmc,cycle2cycle-delay-ns = <0>;
	537	gpmc,wait-monitoring-ns = <0>;
	538	gpmc,clk-activation-ns = <5>;
	539	gpmc,wr-data-mux-bus-ns = <30>;
	540	gpmc,wr-access-ns = <81>;
	541	gpmc,sync-clk-ps = <15000>;
	542
	543	/*
	544	* MTD partition table corresponding to Nokia's
	545	* Maemo 5 (Fremantle) release.
	546	*/
	547	partition@0 {
	548	label = "bootloader";
	549	reg = <0x00000000 0x00020000>;
	550	read-only;
	551	};
	552	partition@1 {
	553	label = "config";
	554	reg = <0x00020000 0x00060000>;
	555	};
	556	partition@2 {
	557	label = "log";
	558	reg = <0x00080000 0x00040000>;
	559	};
	560	partition@3 {
	561	label = "kernel";
	562	reg = <0x000c0000 0x00200000>;
	563	};
	564	partition@4 {
	565	label = "initfs";
	566	reg = <0x002c0000 0x00200000>;
567	};
568	partition@5 {
569	label = "rootfs";
570	reg = <0x004c0000 0x0fb40000>;
571	};
572	};
573	};
574
a4d4b153 PM	575	&mcspi1 {
	576	/*
	577	* For some reason, touchscreen is necessary for screen to work at
	578	* all on real hw. It works well without it on emulator.
	579	*
	580	* Also... order in the device tree actually matters here.
	581	*/
	582	tsc2005@0 {
	583	compatible = "tsc2005";
	584	spi-max-frequency = <6000000>;
	585	reg = <0>;
	586	};
1133420f TV	587
	588	acx565akm@2 {
	589	compatible = "sony,acx565akm";
a4d4b153 PM	590	spi-max-frequency = <6000000>;
a4d4b153 PM	591	reg = <2>;
d1e6f516 SR	592
d1e6f516 SR	593	pinctrl-names = "default";
1133420f TV	594	pinctrl-0 = <&acx565akm_pins>;
	595
	596	label = "lcd";
	597	reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */
	598
	599	port {
	600	lcd_in: endpoint {
	601	remote-endpoint = <&sdi_out>;
	602	};
	603	};
a4d4b153 PM	604	};
	605	};
	606
	607	&usb_otg_hs {
	608	interface-type = <0>;
	609	usb-phy = <&usb2_phy>;
d2afcf09 RQ	610	phys = <&usb2_phy>;
d2afcf09 RQ	611	phy-names = "usb2-phy";
a4d4b153 PM	612	mode = <2>;
	613	power = <50>;
	614	};
7a89eecf SR	615
	616	&uart1 {
	617	status = "disabled";
	618	};
	619
	620	&uart2 {
	621	pinctrl-names = "default";
	622	pinctrl-0 = <&uart2_pins>;
	623	};
	624
	625	&uart3 {
	626	pinctrl-names = "default";
	627	pinctrl-0 = <&uart3_pins>;
	628	};
1133420f TV	629
	630	&dss {
	631	status = "ok";
	632
	633	pinctrl-names = "default";
	634	pinctrl-0 = <&dss_sdi_pins>;
	635
	636	vdds_sdi-supply = <&vaux1>;
	637
	638	ports {
	639	#address-cells = <1>;
	640	#size-cells = <0>;
	641
	642	port@1 {
	643	reg = <1>;
	644
	645	sdi_out: endpoint {
	646	remote-endpoint = <&lcd_in>;
	647	datapairs = <2>;
	648	};
	649	};
	650	};
	651	};
	652
	653	&venc {
	654	status = "ok";
	655
	656	vdda-supply = <&vdac>;
	657
	658	port {
	659	venc_out: endpoint {
	660	remote-endpoint = <&tv_connector_in>;
	661	ti,channels = <1>;
	662	};
	663	};
	664	};