ARM: dts: DRA7: Add CPU OPP table
[deliverable/linux.git] / arch / arm / boot / dts / omap3-n900.dts
CommitLineData
a4d4b153
PM
1/*
2 * Copyright (C) 2013 Pavel Machek <pavel@ucw.cz>
3 * Copyright 2013 Aaro Koskinen <aaro.koskinen@iki.fi>
4 *
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License version 2 (or later) as
7 * published by the Free Software Foundation.
8 */
9
10/dts-v1/;
11
12#include "omap34xx.dtsi"
13
14/ {
15 model = "Nokia N900";
16 compatible = "nokia,omap3-n900", "ti,omap3";
17
18 cpus {
19 cpu@0 {
20 cpu0-supply = <&vcc>;
21 };
22 };
23
24 memory {
25 device_type = "memory";
26 reg = <0x80000000 0x10000000>; /* 256 MB */
27 };
28
29};
30
31&i2c1 {
32 clock-frequency = <2200000>;
33
34 twl: twl@48 {
35 reg = <0x48>;
36 interrupts = <7>; /* SYS_NIRQ cascaded to intc */
37 interrupt-parent = <&intc>;
38 };
39};
40
41#include "twl4030.dtsi"
42
43&twl_gpio {
44 ti,pullups = <0x0>;
45 ti,pulldowns = <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */
46};
47
48&i2c2 {
49 clock-frequency = <400000>;
50};
51
52&i2c3 {
53 clock-frequency = <100000>;
54};
55
56&mmc1 {
57 status = "disabled";
58};
59
60&mmc2 {
61 status = "disabled";
62};
63
64&mmc3 {
65 status = "disabled";
66};
67
68&mcspi1 {
69 /*
70 * For some reason, touchscreen is necessary for screen to work at
71 * all on real hw. It works well without it on emulator.
72 *
73 * Also... order in the device tree actually matters here.
74 */
75 tsc2005@0 {
76 compatible = "tsc2005";
77 spi-max-frequency = <6000000>;
78 reg = <0>;
79 };
80 mipid@2 {
81 compatible = "acx565akm";
82 spi-max-frequency = <6000000>;
83 reg = <2>;
84 };
85};
86
87&usb_otg_hs {
88 interface-type = <0>;
89 usb-phy = <&usb2_phy>;
d2afcf09
RQ
90 phys = <&usb2_phy>;
91 phy-names = "usb2-phy";
a4d4b153
PM
92 mode = <2>;
93 power = <50>;
94};
This page took 0.033992 seconds and 5 git commands to generate.