[deliverable/linux.git] / arch / arm / boot / dts / omap3-n900.dts

/*
 * Copyright (C) 2013 Pavel Machek <pavel@ucw.cz>
 * Copyright (C) 2013-2014 Aaro Koskinen <aaro.koskinen@iki.fi>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 (or later) as
 * published by the Free Software Foundation.
 */

/dts-v1/;

#include "omap34xx-hs.dtsi"
#include <dt-bindings/input/input.h>

/ {
	model = "Nokia N900";
	compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3";

	cpus {
		cpu@0 {
			cpu0-supply = <&vcc>;
		};
	};

	leds {
		compatible = "gpio-leds";
		heartbeat {
			label = "debug::sleep";
			gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;  /* gpio162 */
			linux,default-trigger = "default-on";
			pinctrl-names = "default";
			pinctrl-0 = <&debug_leds>;
		};
	};

	memory {
		device_type = "memory";
		reg = <0x80000000 0x10000000>; /* 256 MB */
	};

	gpio_keys {
		compatible = "gpio-keys";

		camera_lens_cover {
			label = "Camera Lens Cover";
			gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */
			linux,input-type = <5>; /* EV_SW */
			linux,code = <0x09>; /* SW_CAMERA_LENS_COVER */
			gpio-key,wakeup;
		};

		camera_focus {
			label = "Camera Focus";
			gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */
			linux,code = <0x210>; /* KEY_CAMERA_FOCUS */
			gpio-key,wakeup;
		};

		camera_capture {
			label = "Camera Capture";
			gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */
			linux,code = <0xd4>; /* KEY_CAMERA */
			gpio-key,wakeup;
		};

		lock_button {
			label = "Lock Button";
			gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */
			linux,code = <0x98>; /* KEY_SCREENLOCK */
			gpio-key,wakeup;
		};

		keypad_slide {
			label = "Keypad Slide";
			gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */
			linux,input-type = <5>; /* EV_SW */
			linux,code = <0x0a>; /* SW_KEYPAD_SLIDE */
			gpio-key,wakeup;
		};

		proximity_sensor {
			label = "Proximity Sensor";
			gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */
			linux,input-type = <5>; /* EV_SW */
			linux,code = <0x0b>; /* SW_FRONT_PROXIMITY */
		};
	};

	isp1704: isp1704 {
		compatible = "nxp,isp1704";
		nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>;
		usb-phy = <&usb2_phy>;
	};

	tv: connector {
		compatible = "composite-connector";
		label = "tv";

		port {
			tv_connector_in: endpoint {
				remote-endpoint = <&venc_out>;
			};
		};
	};

	sound: n900-audio {
		compatible = "nokia,n900-audio";

		nokia,cpu-dai = <&mcbsp2>;
		nokia,audio-codec = <&tlv320aic3x>, <&tlv320aic3x_aux>;
		nokia,headphone-amplifier = <&tpa6130a2>;

		tvout-selection-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; /* 40 */
		jack-detection-gpios = <&gpio6 17 GPIO_ACTIVE_HIGH>; /* 177 */
		eci-switch-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* 182 */
		speaker-amplifier-gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>;
	};
};

&omap3_pmx_core {
	pinctrl-names = "default";

	uart2_pins: pinmux_uart2_pins {
		pinctrl-single,pins = <
			0x14a (PIN_INPUT | MUX_MODE0)		/* uart2_rx */
			0x148 (PIN_OUTPUT | MUX_MODE0)		/* uart2_tx */
		>;
	};

	uart3_pins: pinmux_uart3_pins {
		pinctrl-single,pins = <
			0x16e (PIN_INPUT | MUX_MODE0)		/* uart3_rx */
			0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx */
		>;
	};

	i2c1_pins: pinmux_i2c1_pins {
		pinctrl-single,pins = <
			0x18a (PIN_INPUT | MUX_MODE0)		/* i2c1_scl */
			0x18c (PIN_INPUT | MUX_MODE0)		/* i2c1_sda */
		>;
	};

	i2c2_pins: pinmux_i2c2_pins {
		pinctrl-single,pins = <
			0x18e (PIN_INPUT | MUX_MODE0)		/* i2c2_scl */
			0x190 (PIN_INPUT | MUX_MODE0)		/* i2c2_sda */
		>;
	};

	i2c3_pins: pinmux_i2c3_pins {
		pinctrl-single,pins = <
			0x192 (PIN_INPUT | MUX_MODE0)		/* i2c3_scl */
			0x194 (PIN_INPUT | MUX_MODE0)		/* i2c3_sda */
		>;
	};

	debug_leds: pinmux_debug_led_pins {
		pinctrl-single,pins = <
			OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4)	/* mcbsp1_clkx.gpio_162 */
		>;
	};

	mcspi4_pins: pinmux_mcspi4_pins {
		pinctrl-single,pins = <
			0x15c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */
			0x162 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */
			0x160 (PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */
			0x166 (PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */
		>;
	};

	mmc1_pins: pinmux_mmc1_pins {
		pinctrl-single,pins = <
			0x114 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk */
			0x116 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd */
			0x118 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0 */
			0x11a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1 */
			0x11c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2 */
			0x11e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3 */
		>;
	};

	mmc2_pins: pinmux_mmc2_pins {
		pinctrl-single,pins = <
			0x128 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk */
			0x12a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd */
			0x12c (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc2_dat0 */
			0x12e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1 */
			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2 */
			0x132 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3 */
			0x134 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat4 */
			0x136 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat5 */
			0x138 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat6 */
			0x13a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat7 */
		>;
	};

	acx565akm_pins: pinmux_acx565akm_pins {
		pinctrl-single,pins = <
			0x0d4 (PIN_OUTPUT | MUX_MODE4)		/* RX51_LCD_RESET_GPIO */
		>;
	};

	dss_sdi_pins: pinmux_dss_sdi_pins {
		pinctrl-single,pins = <
			0x0c0 (PIN_OUTPUT | MUX_MODE1)   /* dss_data10.sdi_dat1n */
			0x0c2 (PIN_OUTPUT | MUX_MODE1)   /* dss_data11.sdi_dat1p */
			0x0c4 (PIN_OUTPUT | MUX_MODE1)   /* dss_data12.sdi_dat2n */
			0x0c6 (PIN_OUTPUT | MUX_MODE1)   /* dss_data13.sdi_dat2p */

			0x0d8 (PIN_OUTPUT | MUX_MODE1)   /* dss_data22.sdi_clkp */
			0x0da (PIN_OUTPUT | MUX_MODE1)   /* dss_data23.sdi_clkn */
		>;
	};

	wl1251_pins: pinmux_wl1251 {
		pinctrl-single,pins = <
			0x0ce (PIN_OUTPUT | MUX_MODE4)		/* gpio 87 => wl1251 enable */
			0x05a (PIN_INPUT | MUX_MODE4)		/* gpio 42 => wl1251 irq */
		>;
	};

	ssi_pins: pinmux_ssi {
		pinctrl-single,pins = <
			0x150 (PIN_INPUT_PULLUP | MUX_MODE1)	/* ssi1_rdy_tx */
			0x14e (PIN_OUTPUT | MUX_MODE1)		/* ssi1_flag_tx */
			0x152 (PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */
			0x14c (PIN_OUTPUT | MUX_MODE1)		/* ssi1_dat_tx */
			0x154 (PIN_INPUT | MUX_MODE1)		/* ssi1_dat_rx */
			0x156 (PIN_INPUT | MUX_MODE1)		/* ssi1_flag_rx */
			0x158 (PIN_OUTPUT | MUX_MODE1)		/* ssi1_rdy_rx */
			0x15a (PIN_OUTPUT | MUX_MODE1)		/* ssi1_wake */
		>;
	};

	modem_pins: pinmux_modem {
		pinctrl-single,pins = <
			0x0ac (PIN_OUTPUT | MUX_MODE4)		/* gpio 70 => cmt_apeslpx */
			0x0b0 (PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* gpio 72 => ape_rst_rq */
			0x0b2 (PIN_OUTPUT | MUX_MODE4)		/* gpio 73 => cmt_rst_rq */
			0x0b4 (PIN_OUTPUT | MUX_MODE4)		/* gpio 74 => cmt_en */
			0x0b6 (PIN_OUTPUT | MUX_MODE4)		/* gpio 75 => cmt_rst */
			0x15e (PIN_OUTPUT | MUX_MODE4)		/* gpio 157 => cmt_bsi */
		>;
	};
};

&i2c1 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c1_pins>;

	clock-frequency = <2200000>;

	twl: twl@48 {
		reg = <0x48>;
		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
		interrupt-parent = <&intc>;
	};
};

#include "twl4030.dtsi"
#include "twl4030_omap3.dtsi"

&vaux1 {
	regulator-name = "V28";
	regulator-min-microvolt = <2800000>;
	regulator-max-microvolt = <2800000>;
	regulator-always-on; /* due battery cover sensor */
};

&vaux2 {
	regulator-name = "VCSI";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
};

&vaux3 {
	regulator-name = "VMMC2_30";
	regulator-min-microvolt = <2800000>;
	regulator-max-microvolt = <3000000>;
};

&vaux4 {
	regulator-name = "VCAM_ANA_28";
	regulator-min-microvolt = <2800000>;
	regulator-max-microvolt = <2800000>;
};

&vmmc1 {
	regulator-name = "VMMC1";
	regulator-min-microvolt = <1850000>;
	regulator-max-microvolt = <3150000>;
};

&vmmc2 {
	regulator-name = "V28_A";
	regulator-min-microvolt = <2800000>;
	regulator-max-microvolt = <3000000>;
	regulator-always-on; /* due VIO leak to AIC34 VDDs */
};

&vpll1 {
	regulator-name = "VPLL";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
	regulator-always-on;
};

&vpll2 {
	regulator-name = "VSDI_CSI";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
	regulator-always-on;
};

&vsim {
	regulator-name = "VMMC2_IO_18";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
};

&vio {
	regulator-name = "VIO";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;

};

&vintana1 {
	regulator-name = "VINTANA1";
	/* fixed to 1500000 */
	regulator-always-on;
};

&vintana2 {
	regulator-name = "VINTANA2";
	regulator-min-microvolt = <2750000>;
	regulator-max-microvolt = <2750000>;
	regulator-always-on;
};

&vintdig {
	regulator-name = "VINTDIG";
	/* fixed to 1500000 */
	regulator-always-on;
};

&twl {
	twl_audio: audio {
		compatible = "ti,twl4030-audio";
		ti,enable-vibra = <1>;
	};

	twl_power: power {
		compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off";
		ti,use_poweroff;
	};
};

&twl_keypad {
	linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_Q)
			 MATRIX_KEY(0x00, 0x01, KEY_O)
			 MATRIX_KEY(0x00, 0x02, KEY_P)
			 MATRIX_KEY(0x00, 0x03, KEY_COMMA)
			 MATRIX_KEY(0x00, 0x04, KEY_BACKSPACE)
			 MATRIX_KEY(0x00, 0x06, KEY_A)
			 MATRIX_KEY(0x00, 0x07, KEY_S)

			 MATRIX_KEY(0x01, 0x00, KEY_W)
			 MATRIX_KEY(0x01, 0x01, KEY_D)
			 MATRIX_KEY(0x01, 0x02, KEY_F)
			 MATRIX_KEY(0x01, 0x03, KEY_G)
			 MATRIX_KEY(0x01, 0x04, KEY_H)
			 MATRIX_KEY(0x01, 0x05, KEY_J)
			 MATRIX_KEY(0x01, 0x06, KEY_K)
			 MATRIX_KEY(0x01, 0x07, KEY_L)

			 MATRIX_KEY(0x02, 0x00, KEY_E)
			 MATRIX_KEY(0x02, 0x01, KEY_DOT)
			 MATRIX_KEY(0x02, 0x02, KEY_UP)
			 MATRIX_KEY(0x02, 0x03, KEY_ENTER)
			 MATRIX_KEY(0x02, 0x05, KEY_Z)
			 MATRIX_KEY(0x02, 0x06, KEY_X)
			 MATRIX_KEY(0x02, 0x07, KEY_C)
			 MATRIX_KEY(0x02, 0x08, KEY_F9)

			 MATRIX_KEY(0x03, 0x00, KEY_R)
			 MATRIX_KEY(0x03, 0x01, KEY_V)
			 MATRIX_KEY(0x03, 0x02, KEY_B)
			 MATRIX_KEY(0x03, 0x03, KEY_N)
			 MATRIX_KEY(0x03, 0x04, KEY_M)
			 MATRIX_KEY(0x03, 0x05, KEY_SPACE)
			 MATRIX_KEY(0x03, 0x06, KEY_SPACE)
			 MATRIX_KEY(0x03, 0x07, KEY_LEFT)

			 MATRIX_KEY(0x04, 0x00, KEY_T)
			 MATRIX_KEY(0x04, 0x01, KEY_DOWN)
			 MATRIX_KEY(0x04, 0x02, KEY_RIGHT)
			 MATRIX_KEY(0x04, 0x04, KEY_LEFTCTRL)
			 MATRIX_KEY(0x04, 0x05, KEY_RIGHTALT)
			 MATRIX_KEY(0x04, 0x06, KEY_LEFTSHIFT)
			 MATRIX_KEY(0x04, 0x08, KEY_F10)

			 MATRIX_KEY(0x05, 0x00, KEY_Y)
			 MATRIX_KEY(0x05, 0x08, KEY_F11)

			 MATRIX_KEY(0x06, 0x00, KEY_U)

			 MATRIX_KEY(0x07, 0x00, KEY_I)
			 MATRIX_KEY(0x07, 0x01, KEY_F7)
			 MATRIX_KEY(0x07, 0x02, KEY_F8)
			 >;
};

&twl_gpio {
	ti,pullups	= <0x0>;
	ti,pulldowns	= <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */
};

&i2c2 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c2_pins>;

	clock-frequency = <100000>;

	tlv320aic3x: tlv320aic3x@18 {
		compatible = "ti,tlv320aic3x";
		reg = <0x18>;
		gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
		ai3x-gpio-func = <
			0 /* AIC3X_GPIO1_FUNC_DISABLED */
			5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
		>;

		AVDD-supply = <&vmmc2>;
		DRVDD-supply = <&vmmc2>;
		IOVDD-supply = <&vio>;
		DVDD-supply = <&vio>;
	};

	tlv320aic3x_aux: tlv320aic3x@19 {
		compatible = "ti,tlv320aic3x";
		reg = <0x19>;
		gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */

		AVDD-supply = <&vmmc2>;
		DRVDD-supply = <&vmmc2>;
		IOVDD-supply = <&vio>;
		DVDD-supply = <&vio>;
	};

	tsl2563: tsl2563@29 {
		compatible = "amstaos,tsl2563";
		reg = <0x29>;

		amstaos,cover-comp-gain = <16>;
	};

	lp5523: lp5523@32 {
		compatible = "national,lp5523";
		reg = <0x32>;
		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
		enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */

		chan0 {
			chan-name = "lp5523:kb1";
			led-cur = /bits/ 8 <50>;
			max-cur = /bits/ 8 <100>;
		};

		chan1 {
			chan-name = "lp5523:kb2";
			led-cur = /bits/ 8 <50>;
			max-cur = /bits/ 8 <100>;
		};

		chan2 {
			chan-name = "lp5523:kb3";
			led-cur = /bits/ 8 <50>;
			max-cur = /bits/ 8 <100>;
		};

		chan3 {
			chan-name = "lp5523:kb4";
			led-cur = /bits/ 8 <50>;
			max-cur = /bits/ 8 <100>;
		};

		chan4 {
			chan-name = "lp5523:b";
			led-cur = /bits/ 8 <50>;
			max-cur = /bits/ 8 <100>;
		};

		chan5 {
			chan-name = "lp5523:g";
			led-cur = /bits/ 8 <50>;
			max-cur = /bits/ 8 <100>;
		};

		chan6 {
			chan-name = "lp5523:r";
			led-cur = /bits/ 8 <50>;
			max-cur = /bits/ 8 <100>;
		};

		chan7 {
			chan-name = "lp5523:kb5";
			led-cur = /bits/ 8 <50>;
			max-cur = /bits/ 8 <100>;
		};

		chan8 {
			chan-name = "lp5523:kb6";
			led-cur = /bits/ 8 <50>;
			max-cur = /bits/ 8 <100>;
		};
	};

	bq27200: bq27200@55 {
		compatible = "ti,bq27200";
		reg = <0x55>;
	};

	tpa6130a2: tpa6130a2@60 {
		compatible = "ti,tpa6130a2";
		reg = <0x60>;

		Vdd-supply = <&vmmc2>;

		power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; /* 98 */
	};

	bq24150a: bq24150a@6b {
		compatible = "ti,bq24150a";
		reg = <0x6b>;

		ti,current-limit = <100>;
		ti,weak-battery-voltage = <3400>;
		ti,battery-regulation-voltage = <4200>;
		ti,charge-current = <650>;
		ti,termination-current = <100>;
		ti,resistor-sense = <68>;

		ti,usb-charger-detection = <&isp1704>;
	};
};

&i2c3 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c3_pins>;

	clock-frequency = <400000>;
};

&mmc1 {
	pinctrl-names = "default";
	pinctrl-0 = <&mmc1_pins>;
	vmmc-supply = <&vmmc1>;
	bus-width = <4>;
	cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
};

/* most boards use vaux3, only some old versions use vmmc2 instead */
&mmc2 {
	pinctrl-names = "default";
	pinctrl-0 = <&mmc2_pins>;
	vmmc-supply = <&vaux3>;
	vmmc_aux-supply = <&vsim>;
	bus-width = <8>;
	non-removable;
};

&mmc3 {
	status = "disabled";
};

&gpmc {
	ranges = <0 0 0x04000000 0x10000000>; /* 256MB */

	/* gpio-irq for dma: 65 */

	onenand@0,0 {
		#address-cells = <1>;
		#size-cells = <1>;
		reg = <0 0 0x10000000>;

		gpmc,sync-read;
		gpmc,sync-write;
		gpmc,burst-length = <16>;
		gpmc,burst-read;
		gpmc,burst-wrap;
		gpmc,burst-write;
		gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */
		gpmc,mux-add-data = <2>; /* GPMC_MUX_AD */
		gpmc,cs-on-ns = <0>;
		gpmc,cs-rd-off-ns = <87>;
		gpmc,cs-wr-off-ns = <87>;
		gpmc,adv-on-ns = <0>;
		gpmc,adv-rd-off-ns = <10>;
		gpmc,adv-wr-off-ns = <10>;
		gpmc,oe-on-ns = <15>;
		gpmc,oe-off-ns = <87>;
		gpmc,we-on-ns = <0>;
		gpmc,we-off-ns = <87>;
		gpmc,rd-cycle-ns = <112>;
		gpmc,wr-cycle-ns = <112>;
		gpmc,access-ns = <81>;
		gpmc,page-burst-access-ns = <15>;
		gpmc,bus-turnaround-ns = <0>;
		gpmc,cycle2cycle-delay-ns = <0>;
		gpmc,wait-monitoring-ns = <0>;
		gpmc,clk-activation-ns = <5>;
		gpmc,wr-data-mux-bus-ns = <30>;
		gpmc,wr-access-ns = <81>;
		gpmc,sync-clk-ps = <15000>;

		/*
		 * MTD partition table corresponding to Nokia's
		 * Maemo 5 (Fremantle) release.
		 */
		partition@0 {
			label = "bootloader";
			reg = <0x00000000 0x00020000>;
			read-only;
		};
		partition@1 {
			label = "config";
			reg = <0x00020000 0x00060000>;
		};
		partition@2 {
			label = "log";
			reg = <0x00080000 0x00040000>;
		};
		partition@3 {
			label = "kernel";
			reg = <0x000c0000 0x00200000>;
		};
		partition@4 {
			label = "initfs";
			reg = <0x002c0000 0x00200000>;
		};
		partition@5 {
			label = "rootfs";
			reg = <0x004c0000 0x0fb40000>;
		};
	};
};

&mcspi1 {
	/*
	 * For some reason, touchscreen is necessary for screen to work at
	 * all on real hw. It works well without it on emulator.
	 *
	 * Also... order in the device tree actually matters here.
	 */
	tsc2005@0 {
		compatible = "ti,tsc2005";
		spi-max-frequency = <6000000>;
		reg = <0>;

		vio-supply = <&vio>;

		reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
		interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */

		touchscreen-fuzz-x = <4>;
		touchscreen-fuzz-y = <7>;
		touchscreen-fuzz-pressure = <2>;
		touchscreen-max-x = <4096>;
		touchscreen-max-y = <4096>;
		touchscreen-max-pressure = <2048>;

		ti,x-plate-ohms = <280>;
		ti,esd-recovery-timeout-ms = <8000>;
	};

	acx565akm@2 {
		compatible = "sony,acx565akm";
		spi-max-frequency = <6000000>;
		reg = <2>;

		pinctrl-names = "default";
		pinctrl-0 = <&acx565akm_pins>;

		label = "lcd";
		reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */

		port {
			lcd_in: endpoint {
				remote-endpoint = <&sdi_out>;
			};
		};
	};
};

&mcspi4 {
	pinctrl-names = "default";
	pinctrl-0 = <&mcspi4_pins>;

	wl1251@0 {
		pinctrl-names = "default";
		pinctrl-0 = <&wl1251_pins>;

		vio-supply = <&vio>;

		compatible = "ti,wl1251";
		reg = <0>;
		spi-max-frequency = <48000000>;

		spi-cpol;
		spi-cpha;

		ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */

		interrupt-parent = <&gpio2>;
		interrupts = <10 IRQ_TYPE_NONE>; /* gpio line 42 */
	};
};

&usb_otg_hs {
	interface-type = <0>;
	usb-phy = <&usb2_phy>;
	phys = <&usb2_phy>;
	phy-names = "usb2-phy";
	mode = <2>;
	power = <50>;
};

&uart1 {
	status = "disabled";
};

&uart2 {
	interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
	pinctrl-names = "default";
	pinctrl-0 = <&uart2_pins>;
};

&uart3 {
	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
	pinctrl-names = "default";
	pinctrl-0 = <&uart3_pins>;
};

&dss {
	status = "ok";

	pinctrl-names = "default";
	pinctrl-0 = <&dss_sdi_pins>;

	vdds_sdi-supply = <&vaux1>;

	ports {
		#address-cells = <1>;
		#size-cells = <0>;

		port@1 {
			reg = <1>;

			sdi_out: endpoint {
				remote-endpoint = <&lcd_in>;
				datapairs = <2>;
			};
		};
	};
};

&venc {
	status = "ok";

	vdda-supply = <&vdac>;

	port {
		venc_out: endpoint {
			remote-endpoint = <&tv_connector_in>;
			ti,channels = <1>;
		};
	};
};

&mcbsp2 {
	status = "ok";
};

&ssi_port1 {
	pinctrl-names = "default";
	pinctrl-0 = <&ssi_pins>;

	ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */

	modem: hsi-client {
		compatible = "nokia,n900-modem";

		pinctrl-names = "default";
		pinctrl-0 = <&modem_pins>;

		hsi-channel-ids = <0>, <1>, <2>, <3>;
		hsi-channel-names = "mcsaab-control",
				    "speech-control",
				    "speech-data",
				    "mcsaab-data";
		hsi-speed-kbps = <55000>;
		hsi-mode = "frame";
		hsi-flow = "synchronized";
		hsi-arb-mode = "round-robin";

		interrupts-extended = <&gpio3 8 IRQ_TYPE_EDGE_FALLING>; /* 72 */

		gpios = <&gpio3  6 GPIO_ACTIVE_HIGH>, /* 70 */
			<&gpio3  9 GPIO_ACTIVE_HIGH>, /* 73 */
			<&gpio3 10 GPIO_ACTIVE_HIGH>, /* 74 */
			<&gpio3 11 GPIO_ACTIVE_HIGH>, /* 75 */
			<&gpio5 29 GPIO_ACTIVE_HIGH>; /* 157 */
		gpio-names = "cmt_apeslpx",
			     "cmt_rst_rq",
			     "cmt_en",
			     "cmt_rst",
			     "cmt_bsi";
	};
};

&ssi_port2 {
	status = "disabled";
};
Commit	Line	Data
a4d4b153 PM	1	/*
a4d4b153 PM	2	* Copyright (C) 2013 Pavel Machek <pavel@ucw.cz>
c3580bc1	3	* Copyright (C) 2013-2014 Aaro Koskinen <aaro.koskinen@iki.fi>
a4d4b153 PM	4	*
	5	* This program is free software; you can redistribute it and/or modify
	6	* it under the terms of the GNU General Public License version 2 (or later) as
	7	* published by the Free Software Foundation.
	8	*/
	9
	10	/dts-v1/;
	11
f2e2c9d9	12	#include "omap34xx-hs.dtsi"
3fdb7717	13	#include <dt-bindings/input/input.h>
a4d4b153 PM	14
	15	/ {
	16	model = "Nokia N900";
c3580bc1	17	compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3";
a4d4b153 PM	18
	19	cpus {
	20	cpu@0 {
	21	cpu0-supply = <&vcc>;
	22	};
	23	};
	24
c1be2032 TL	25	leds {
	26	compatible = "gpio-leds";
	27	heartbeat {
	28	label = "debug::sleep";
	29	gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* gpio162 */
	30	linux,default-trigger = "default-on";
	31	pinctrl-names = "default";
	32	pinctrl-0 = <&debug_leds>;
	33	};
	34	};
	35
a4d4b153 PM	36	memory {
	37	device_type = "memory";
	38	reg = <0x80000000 0x10000000>; /* 256 MB */
	39	};
	40
3931c839 SR	41	gpio_keys {
	42	compatible = "gpio-keys";
	43
	44	camera_lens_cover {
	45	label = "Camera Lens Cover";
	46	gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */
	47	linux,input-type = <5>; /* EV_SW */
	48	linux,code = <0x09>; /* SW_CAMERA_LENS_COVER */
	49	gpio-key,wakeup;
	50	};
	51
	52	camera_focus {
	53	label = "Camera Focus";
	54	gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */
	55	linux,code = <0x210>; /* KEY_CAMERA_FOCUS */
	56	gpio-key,wakeup;
	57	};
	58
	59	camera_capture {
	60	label = "Camera Capture";
	61	gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */
	62	linux,code = <0xd4>; /* KEY_CAMERA */
	63	gpio-key,wakeup;
	64	};
	65
	66	lock_button {
	67	label = "Lock Button";
	68	gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */
	69	linux,code = <0x98>; /* KEY_SCREENLOCK */
	70	gpio-key,wakeup;
	71	};
	72
	73	keypad_slide {
	74	label = "Keypad Slide";
	75	gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */
	76	linux,input-type = <5>; /* EV_SW */
	77	linux,code = <0x0a>; /* SW_KEYPAD_SLIDE */
	78	gpio-key,wakeup;
	79	};
	80
	81	proximity_sensor {
	82	label = "Proximity Sensor";
	83	gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */
	84	linux,input-type = <5>; /* EV_SW */
	85	linux,code = <0x0b>; /* SW_FRONT_PROXIMITY */
	86	};
	87	};
	88
e17337a2 SR	89	isp1704: isp1704 {
	90	compatible = "nxp,isp1704";
	91	nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>;
	92	usb-phy = <&usb2_phy>;
	93	};
1133420f TV	94
	95	tv: connector {
	96	compatible = "composite-connector";
	97	label = "tv";
	98
	99	port {
	100	tv_connector_in: endpoint {
	101	remote-endpoint = <&venc_out>;
	102	};
	103	};
	104	};
f7d0f2a0 SR	105
	106	sound: n900-audio {
	107	compatible = "nokia,n900-audio";
	108
	109	nokia,cpu-dai = <&mcbsp2>;
	110	nokia,audio-codec = <&tlv320aic3x>, <&tlv320aic3x_aux>;
	111	nokia,headphone-amplifier = <&tpa6130a2>;
	112
	113	tvout-selection-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; /* 40 */
	114	jack-detection-gpios = <&gpio6 17 GPIO_ACTIVE_HIGH>; /* 177 */
	115	eci-switch-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* 182 */
	116	speaker-amplifier-gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>;
	117	};
a4d4b153 PM	118	};
a4d4b153 PM	119
ac888a88 SR	120	&omap3_pmx_core {
	121	pinctrl-names = "default";
	122
7a89eecf SR	123	uart2_pins: pinmux_uart2_pins {
	124	pinctrl-single,pins = <
	125	0x14a (PIN_INPUT \| MUX_MODE0) /* uart2_rx */
	126	0x148 (PIN_OUTPUT \| MUX_MODE0) /* uart2_tx */
	127	>;
	128	};
	129
	130	uart3_pins: pinmux_uart3_pins {
	131	pinctrl-single,pins = <
	132	0x16e (PIN_INPUT \| MUX_MODE0) /* uart3_rx */
	133	0x170 (PIN_OUTPUT \| MUX_MODE0) /* uart3_tx */
	134	>;
	135	};
	136
ac888a88 SR	137	i2c1_pins: pinmux_i2c1_pins {
ac888a88 SR	138	pinctrl-single,pins = <
a4ff93c1 TL	139	0x18a (PIN_INPUT \| MUX_MODE0) /* i2c1_scl */
a4ff93c1 TL	140	0x18c (PIN_INPUT \| MUX_MODE0) /* i2c1_sda */
ac888a88 SR	141	>;
	142	};
	143
	144	i2c2_pins: pinmux_i2c2_pins {
	145	pinctrl-single,pins = <
a4ff93c1 TL	146	0x18e (PIN_INPUT \| MUX_MODE0) /* i2c2_scl */
a4ff93c1 TL	147	0x190 (PIN_INPUT \| MUX_MODE0) /* i2c2_sda */
ac888a88 SR	148	>;
	149	};
	150
	151	i2c3_pins: pinmux_i2c3_pins {
	152	pinctrl-single,pins = <
a4ff93c1 TL	153	0x192 (PIN_INPUT \| MUX_MODE0) /* i2c3_scl */
a4ff93c1 TL	154	0x194 (PIN_INPUT \| MUX_MODE0) /* i2c3_sda */
ac888a88 SR	155	>;
ac888a88 SR	156	};
f1751cff	157
c1be2032 TL	158	debug_leds: pinmux_debug_led_pins {
	159	pinctrl-single,pins = <
	160	OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT \| MUX_MODE4) /* mcbsp1_clkx.gpio_162 */
	161	>;
	162	};
	163
c1ad2206 SR	164	mcspi4_pins: pinmux_mcspi4_pins {
	165	pinctrl-single,pins = <
	166	0x15c (PIN_INPUT_PULLDOWN \| MUX_MODE1) /* mcspi4_clk */
	167	0x162 (PIN_INPUT_PULLDOWN \| MUX_MODE1) /* mcspi4_somi */
	168	0x160 (PIN_OUTPUT \| MUX_MODE1) /* mcspi4_simo */
	169	0x166 (PIN_OUTPUT \| MUX_MODE1) /* mcspi4_cs0 */
	170	>;
	171	};
	172
f1751cff SR	173	mmc1_pins: pinmux_mmc1_pins {
	174	pinctrl-single,pins = <
	175	0x114 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_clk */
	176	0x116 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_cmd */
	177	0x118 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_dat0 */
	178	0x11a (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_dat1 */
	179	0x11c (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_dat2 */
	180	0x11e (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_dat3 */
	181	>;
	182	};
d1e6f516	183
edd5eb4e TL	184	mmc2_pins: pinmux_mmc2_pins {
	185	pinctrl-single,pins = <
	186	0x128 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_clk */
	187	0x12a (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_cmd */
	188	0x12c (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_dat0 */
	189	0x12e (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_dat1 */
	190	0x130 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_dat2 */
	191	0x132 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_dat3 */
	192	0x134 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_dat4 */
	193	0x136 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_dat5 */
	194	0x138 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_dat6 */
	195	0x13a (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_dat7 */
	196	>;
	197	};
	198
1133420f	199	acx565akm_pins: pinmux_acx565akm_pins {
d1e6f516 SR	200	pinctrl-single,pins = <
	201	0x0d4 (PIN_OUTPUT \| MUX_MODE4) /* RX51_LCD_RESET_GPIO */
	202	>;
	203	};
1133420f TV	204
	205	dss_sdi_pins: pinmux_dss_sdi_pins {
	206	pinctrl-single,pins = <
	207	0x0c0 (PIN_OUTPUT \| MUX_MODE1) /* dss_data10.sdi_dat1n */
	208	0x0c2 (PIN_OUTPUT \| MUX_MODE1) /* dss_data11.sdi_dat1p */
	209	0x0c4 (PIN_OUTPUT \| MUX_MODE1) /* dss_data12.sdi_dat2n */
	210	0x0c6 (PIN_OUTPUT \| MUX_MODE1) /* dss_data13.sdi_dat2p */
	211
	212	0x0d8 (PIN_OUTPUT \| MUX_MODE1) /* dss_data22.sdi_clkp */
	213	0x0da (PIN_OUTPUT \| MUX_MODE1) /* dss_data23.sdi_clkn */
	214	>;
	215	};
c1ad2206 SR	216
	217	wl1251_pins: pinmux_wl1251 {
	218	pinctrl-single,pins = <
	219	0x0ce (PIN_OUTPUT \| MUX_MODE4) /* gpio 87 => wl1251 enable */
	220	0x05a (PIN_INPUT \| MUX_MODE4) /* gpio 42 => wl1251 irq */
	221	>;
	222	};
782e25a4 SR	223
	224	ssi_pins: pinmux_ssi {
	225	pinctrl-single,pins = <
	226	0x150 (PIN_INPUT_PULLUP \| MUX_MODE1) /* ssi1_rdy_tx */
	227	0x14e (PIN_OUTPUT \| MUX_MODE1) /* ssi1_flag_tx */
	228	0x152 (PIN_INPUT \| WAKEUP_EN \| MUX_MODE4) /* ssi1_wake_tx (cawake) */
	229	0x14c (PIN_OUTPUT \| MUX_MODE1) /* ssi1_dat_tx */
	230	0x154 (PIN_INPUT \| MUX_MODE1) /* ssi1_dat_rx */
	231	0x156 (PIN_INPUT \| MUX_MODE1) /* ssi1_flag_rx */
	232	0x158 (PIN_OUTPUT \| MUX_MODE1) /* ssi1_rdy_rx */
	233	0x15a (PIN_OUTPUT \| MUX_MODE1) /* ssi1_wake */
	234	>;
	235	};
76ad4ac1 SR	236
	237	modem_pins: pinmux_modem {
	238	pinctrl-single,pins = <
	239	0x0ac (PIN_OUTPUT \| MUX_MODE4) /* gpio 70 => cmt_apeslpx */
	240	0x0b0 (PIN_INPUT \| WAKEUP_EN \| MUX_MODE4) /* gpio 72 => ape_rst_rq */
	241	0x0b2 (PIN_OUTPUT \| MUX_MODE4) /* gpio 73 => cmt_rst_rq */
	242	0x0b4 (PIN_OUTPUT \| MUX_MODE4) /* gpio 74 => cmt_en */
	243	0x0b6 (PIN_OUTPUT \| MUX_MODE4) /* gpio 75 => cmt_rst */
	244	0x15e (PIN_OUTPUT \| MUX_MODE4) /* gpio 157 => cmt_bsi */
	245	>;
	246	};
ac888a88 SR	247	};
ac888a88 SR	248
a4d4b153	249	&i2c1 {
ac888a88 SR	250	pinctrl-names = "default";
	251	pinctrl-0 = <&i2c1_pins>;
	252
a4d4b153 PM	253	clock-frequency = <2200000>;
	254
	255	twl: twl@48 {
	256	reg = <0x48>;
	257	interrupts = <7>; /* SYS_NIRQ cascaded to intc */
	258	interrupt-parent = <&intc>;
	259	};
	260	};
	261
	262	#include "twl4030.dtsi"
ac888a88	263	#include "twl4030_omap3.dtsi"
a4d4b153	264
9cdbbadd SR	265	&vaux1 {
	266	regulator-name = "V28";
	267	regulator-min-microvolt = <2800000>;
	268	regulator-max-microvolt = <2800000>;
	269	regulator-always-on; /* due battery cover sensor */
	270	};
	271
	272	&vaux2 {
	273	regulator-name = "VCSI";
	274	regulator-min-microvolt = <1800000>;
	275	regulator-max-microvolt = <1800000>;
	276	};
	277
	278	&vaux3 {
	279	regulator-name = "VMMC2_30";
	280	regulator-min-microvolt = <2800000>;
	281	regulator-max-microvolt = <3000000>;
	282	};
	283
	284	&vaux4 {
	285	regulator-name = "VCAM_ANA_28";
	286	regulator-min-microvolt = <2800000>;
	287	regulator-max-microvolt = <2800000>;
	288	};
	289
	290	&vmmc1 {
	291	regulator-name = "VMMC1";
	292	regulator-min-microvolt = <1850000>;
	293	regulator-max-microvolt = <3150000>;
	294	};
	295
	296	&vmmc2 {
	297	regulator-name = "V28_A";
	298	regulator-min-microvolt = <2800000>;
	299	regulator-max-microvolt = <3000000>;
	300	regulator-always-on; /* due VIO leak to AIC34 VDDs */
	301	};
	302
	303	&vpll1 {
	304	regulator-name = "VPLL";
	305	regulator-min-microvolt = <1800000>;
	306	regulator-max-microvolt = <1800000>;
	307	regulator-always-on;
	308	};
	309
	310	&vpll2 {
	311	regulator-name = "VSDI_CSI";
	312	regulator-min-microvolt = <1800000>;
	313	regulator-max-microvolt = <1800000>;
	314	regulator-always-on;
	315	};
	316
	317	&vsim {
	318	regulator-name = "VMMC2_IO_18";
	319	regulator-min-microvolt = <1800000>;
	320	regulator-max-microvolt = <1800000>;
	321	};
	322
	323	&vio {
	324	regulator-name = "VIO";
	325	regulator-min-microvolt = <1800000>;
	326	regulator-max-microvolt = <1800000>;
	327
	328	};
329
330	&vintana1 {
331	regulator-name = "VINTANA1";
332	/* fixed to 1500000 */
333	regulator-always-on;
334	};
335
336	&vintana2 {
337	regulator-name = "VINTANA2";
338	regulator-min-microvolt = <2750000>;
339	regulator-max-microvolt = <2750000>;
340	regulator-always-on;
341	};
342
343	&vintdig {
344	regulator-name = "VINTDIG";
345	/* fixed to 1500000 */
346	regulator-always-on;
347	};
348
06ba7a61 SR	349	&twl {
	350	twl_audio: audio {
	351	compatible = "ti,twl4030-audio";
	352	ti,enable-vibra = <1>;
	353	};
9188883f TL	354
9188883f TL	355	twl_power: power {
daebabd5	356	compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off";
9188883f TL	357	ti,use_poweroff;
9188883f TL	358	};
06ba7a61 SR	359	};
06ba7a61 SR	360
85c215f3	361	&twl_keypad {
3fdb7717 SR	362	linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_Q)
	363	MATRIX_KEY(0x00, 0x01, KEY_O)
	364	MATRIX_KEY(0x00, 0x02, KEY_P)
	365	MATRIX_KEY(0x00, 0x03, KEY_COMMA)
	366	MATRIX_KEY(0x00, 0x04, KEY_BACKSPACE)
	367	MATRIX_KEY(0x00, 0x06, KEY_A)
	368	MATRIX_KEY(0x00, 0x07, KEY_S)
	369
	370	MATRIX_KEY(0x01, 0x00, KEY_W)
	371	MATRIX_KEY(0x01, 0x01, KEY_D)
	372	MATRIX_KEY(0x01, 0x02, KEY_F)
	373	MATRIX_KEY(0x01, 0x03, KEY_G)
	374	MATRIX_KEY(0x01, 0x04, KEY_H)
	375	MATRIX_KEY(0x01, 0x05, KEY_J)
	376	MATRIX_KEY(0x01, 0x06, KEY_K)
	377	MATRIX_KEY(0x01, 0x07, KEY_L)
	378
	379	MATRIX_KEY(0x02, 0x00, KEY_E)
	380	MATRIX_KEY(0x02, 0x01, KEY_DOT)
	381	MATRIX_KEY(0x02, 0x02, KEY_UP)
	382	MATRIX_KEY(0x02, 0x03, KEY_ENTER)
	383	MATRIX_KEY(0x02, 0x05, KEY_Z)
	384	MATRIX_KEY(0x02, 0x06, KEY_X)
	385	MATRIX_KEY(0x02, 0x07, KEY_C)
	386	MATRIX_KEY(0x02, 0x08, KEY_F9)
	387
	388	MATRIX_KEY(0x03, 0x00, KEY_R)
	389	MATRIX_KEY(0x03, 0x01, KEY_V)
	390	MATRIX_KEY(0x03, 0x02, KEY_B)
	391	MATRIX_KEY(0x03, 0x03, KEY_N)
	392	MATRIX_KEY(0x03, 0x04, KEY_M)
	393	MATRIX_KEY(0x03, 0x05, KEY_SPACE)
	394	MATRIX_KEY(0x03, 0x06, KEY_SPACE)
	395	MATRIX_KEY(0x03, 0x07, KEY_LEFT)
	396
	397	MATRIX_KEY(0x04, 0x00, KEY_T)
	398	MATRIX_KEY(0x04, 0x01, KEY_DOWN)
	399	MATRIX_KEY(0x04, 0x02, KEY_RIGHT)
	400	MATRIX_KEY(0x04, 0x04, KEY_LEFTCTRL)
	401	MATRIX_KEY(0x04, 0x05, KEY_RIGHTALT)
	402	MATRIX_KEY(0x04, 0x06, KEY_LEFTSHIFT)
	403	MATRIX_KEY(0x04, 0x08, KEY_F10)
	404
	405	MATRIX_KEY(0x05, 0x00, KEY_Y)
	406	MATRIX_KEY(0x05, 0x08, KEY_F11)
	407
	408	MATRIX_KEY(0x06, 0x00, KEY_U)
	409
	410	MATRIX_KEY(0x07, 0x00, KEY_I)
	411	MATRIX_KEY(0x07, 0x01, KEY_F7)
	412	MATRIX_KEY(0x07, 0x02, KEY_F8)
85c215f3 SR	413	>;
	414	};
	415
a4d4b153 PM	416	&twl_gpio {
	417	ti,pullups = <0x0>;
	418	ti,pulldowns = <0x03ff3f>; /* BIT(0..5) \| BIT(8..17) */
	419	};
	420
	421	&i2c2 {
ac888a88 SR	422	pinctrl-names = "default";
	423	pinctrl-0 = <&i2c2_pins>;
	424
48fc9864	425	clock-frequency = <100000>;
b2b9b258	426
14e3e295 SR	427	tlv320aic3x: tlv320aic3x@18 {
	428	compatible = "ti,tlv320aic3x";
	429	reg = <0x18>;
	430	gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
	431	ai3x-gpio-func = <
	432	0 /* AIC3X_GPIO1_FUNC_DISABLED */
	433	5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
	434	>;
	435
	436	AVDD-supply = <&vmmc2>;
	437	DRVDD-supply = <&vmmc2>;
	438	IOVDD-supply = <&vio>;
	439	DVDD-supply = <&vio>;
	440	};
	441
	442	tlv320aic3x_aux: tlv320aic3x@19 {
	443	compatible = "ti,tlv320aic3x";
	444	reg = <0x19>;
	445	gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
	446
	447	AVDD-supply = <&vmmc2>;
	448	DRVDD-supply = <&vmmc2>;
	449	IOVDD-supply = <&vio>;
	450	DVDD-supply = <&vio>;
	451	};
	452
12f2f873 SR	453	tsl2563: tsl2563@29 {
	454	compatible = "amstaos,tsl2563";
	455	reg = <0x29>;
	456
	457	amstaos,cover-comp-gain = <16>;
	458	};
	459
a0bf1f3e SR	460	lp5523: lp5523@32 {
	461	compatible = "national,lp5523";
	462	reg = <0x32>;
	463	clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
	464	enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
	465
	466	chan0 {
	467	chan-name = "lp5523:kb1";
	468	led-cur = /bits/ 8 <50>;
	469	max-cur = /bits/ 8 <100>;
	470	};
	471
	472	chan1 {
	473	chan-name = "lp5523:kb2";
	474	led-cur = /bits/ 8 <50>;
	475	max-cur = /bits/ 8 <100>;
	476	};
	477
	478	chan2 {
	479	chan-name = "lp5523:kb3";
	480	led-cur = /bits/ 8 <50>;
	481	max-cur = /bits/ 8 <100>;
	482	};
	483
	484	chan3 {
	485	chan-name = "lp5523:kb4";
	486	led-cur = /bits/ 8 <50>;
	487	max-cur = /bits/ 8 <100>;
	488	};
	489
	490	chan4 {
	491	chan-name = "lp5523:b";
	492	led-cur = /bits/ 8 <50>;
	493	max-cur = /bits/ 8 <100>;
	494	};
	495
	496	chan5 {
	497	chan-name = "lp5523:g";
	498	led-cur = /bits/ 8 <50>;
	499	max-cur = /bits/ 8 <100>;
	500	};
	501
	502	chan6 {
	503	chan-name = "lp5523:r";
	504	led-cur = /bits/ 8 <50>;
	505	max-cur = /bits/ 8 <100>;
	506	};
	507
	508	chan7 {
	509	chan-name = "lp5523:kb5";
	510	led-cur = /bits/ 8 <50>;
	511	max-cur = /bits/ 8 <100>;
	512	};
	513
	514	chan8 {
	515	chan-name = "lp5523:kb6";
	516	led-cur = /bits/ 8 <50>;
	517	max-cur = /bits/ 8 <100>;
	518	};
	519	};
	520
b2b9b258 SR	521	bq27200: bq27200@55 {
	522	compatible = "ti,bq27200";
	523	reg = <0x55>;
	524	};
9e2367c8 SR	525
	526	tpa6130a2: tpa6130a2@60 {
	527	compatible = "ti,tpa6130a2";
	528	reg = <0x60>;
	529
	530	Vdd-supply = <&vmmc2>;
	531
	532	power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; /* 98 */
	533	};
334a09c8 SR	534
	535	bq24150a: bq24150a@6b {
	536	compatible = "ti,bq24150a";
	537	reg = <0x6b>;
	538
	539	ti,current-limit = <100>;
	540	ti,weak-battery-voltage = <3400>;
	541	ti,battery-regulation-voltage = <4200>;
	542	ti,charge-current = <650>;
	543	ti,termination-current = <100>;
	544	ti,resistor-sense = <68>;
	545
	546	ti,usb-charger-detection = <&isp1704>;
	547	};
a4d4b153 PM	548	};
	549
	550	&i2c3 {
ac888a88 SR	551	pinctrl-names = "default";
	552	pinctrl-0 = <&i2c3_pins>;
	553
48fc9864	554	clock-frequency = <400000>;
a4d4b153 PM	555	};
	556
	557	&mmc1 {
f1751cff SR	558	pinctrl-names = "default";
	559	pinctrl-0 = <&mmc1_pins>;
	560	vmmc-supply = <&vmmc1>;
	561	bus-width = <4>;
	562	cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
a4d4b153 PM	563	};
a4d4b153 PM	564
edd5eb4e	565	/* most boards use vaux3, only some old versions use vmmc2 instead */
a4d4b153	566	&mmc2 {
edd5eb4e TL	567	pinctrl-names = "default";
	568	pinctrl-0 = <&mmc2_pins>;
	569	vmmc-supply = <&vaux3>;
	570	vmmc_aux-supply = <&vsim>;
	571	bus-width = <8>;
	572	non-removable;
a4d4b153 PM	573	};
	574
	575	&mmc3 {
	576	status = "disabled";
	577	};
	578
8699d2dd SR	579	&gpmc {
	580	ranges = <0 0 0x04000000 0x10000000>; /* 256MB */
	581
	582	/* gpio-irq for dma: 65 */
	583
	584	onenand@0,0 {
	585	#address-cells = <1>;
	586	#size-cells = <1>;
	587	reg = <0 0 0x10000000>;
	588
	589	gpmc,sync-read;
	590	gpmc,sync-write;
	591	gpmc,burst-length = <16>;
	592	gpmc,burst-read;
	593	gpmc,burst-wrap;
	594	gpmc,burst-write;
	595	gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */
	596	gpmc,mux-add-data = <2>; /* GPMC_MUX_AD */
	597	gpmc,cs-on-ns = <0>;
	598	gpmc,cs-rd-off-ns = <87>;
	599	gpmc,cs-wr-off-ns = <87>;
	600	gpmc,adv-on-ns = <0>;
	601	gpmc,adv-rd-off-ns = <10>;
	602	gpmc,adv-wr-off-ns = <10>;
	603	gpmc,oe-on-ns = <15>;
	604	gpmc,oe-off-ns = <87>;
	605	gpmc,we-on-ns = <0>;
	606	gpmc,we-off-ns = <87>;
	607	gpmc,rd-cycle-ns = <112>;
	608	gpmc,wr-cycle-ns = <112>;
	609	gpmc,access-ns = <81>;
	610	gpmc,page-burst-access-ns = <15>;
	611	gpmc,bus-turnaround-ns = <0>;
	612	gpmc,cycle2cycle-delay-ns = <0>;
	613	gpmc,wait-monitoring-ns = <0>;
	614	gpmc,clk-activation-ns = <5>;
	615	gpmc,wr-data-mux-bus-ns = <30>;
	616	gpmc,wr-access-ns = <81>;
	617	gpmc,sync-clk-ps = <15000>;
	618
	619	/*
	620	* MTD partition table corresponding to Nokia's
	621	* Maemo 5 (Fremantle) release.
	622	*/
	623	partition@0 {
	624	label = "bootloader";
	625	reg = <0x00000000 0x00020000>;
	626	read-only;
	627	};
	628	partition@1 {
	629	label = "config";
	630	reg = <0x00020000 0x00060000>;
	631	};
	632	partition@2 {
	633	label = "log";
	634	reg = <0x00080000 0x00040000>;
	635	};
	636	partition@3 {
	637	label = "kernel";
	638	reg = <0x000c0000 0x00200000>;
	639	};
	640	partition@4 {
	641	label = "initfs";
	642	reg = <0x002c0000 0x00200000>;
643	};
644	partition@5 {
645	label = "rootfs";
646	reg = <0x004c0000 0x0fb40000>;
647	};
648	};
649	};
650
a4d4b153 PM	651	&mcspi1 {
	652	/*
	653	* For some reason, touchscreen is necessary for screen to work at
	654	* all on real hw. It works well without it on emulator.
	655	*
	656	* Also... order in the device tree actually matters here.
	657	*/
	658	tsc2005@0 {
50525891	659	compatible = "ti,tsc2005";
a4d4b153 PM	660	spi-max-frequency = <6000000>;
a4d4b153 PM	661	reg = <0>;
50525891 SR	662
	663	vio-supply = <&vio>;
	664
	665	reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
	666	interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */
	667
	668	touchscreen-fuzz-x = <4>;
	669	touchscreen-fuzz-y = <7>;
	670	touchscreen-fuzz-pressure = <2>;
	671	touchscreen-max-x = <4096>;
	672	touchscreen-max-y = <4096>;
	673	touchscreen-max-pressure = <2048>;
	674
	675	ti,x-plate-ohms = <280>;
	676	ti,esd-recovery-timeout-ms = <8000>;
a4d4b153	677	};
1133420f TV	678
	679	acx565akm@2 {
	680	compatible = "sony,acx565akm";
a4d4b153 PM	681	spi-max-frequency = <6000000>;
a4d4b153 PM	682	reg = <2>;
d1e6f516 SR	683
d1e6f516 SR	684	pinctrl-names = "default";
1133420f TV	685	pinctrl-0 = <&acx565akm_pins>;
	686
	687	label = "lcd";
	688	reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */
	689
	690	port {
	691	lcd_in: endpoint {
	692	remote-endpoint = <&sdi_out>;
	693	};
	694	};
a4d4b153 PM	695	};
	696	};
	697
c1ad2206 SR	698	&mcspi4 {
	699	pinctrl-names = "default";
	700	pinctrl-0 = <&mcspi4_pins>;
	701
	702	wl1251@0 {
	703	pinctrl-names = "default";
	704	pinctrl-0 = <&wl1251_pins>;
	705
	706	vio-supply = <&vio>;
	707
	708	compatible = "ti,wl1251";
	709	reg = <0>;
	710	spi-max-frequency = <48000000>;
	711
	712	spi-cpol;
	713	spi-cpha;
	714
	715	ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */
	716
	717	interrupt-parent = <&gpio2>;
	718	interrupts = <10 IRQ_TYPE_NONE>; /* gpio line 42 */
	719	};
	720	};
	721
a4d4b153 PM	722	&usb_otg_hs {
	723	interface-type = <0>;
	724	usb-phy = <&usb2_phy>;
d2afcf09 RQ	725	phys = <&usb2_phy>;
d2afcf09 RQ	726	phy-names = "usb2-phy";
a4d4b153 PM	727	mode = <2>;
	728	power = <50>;
	729	};
7a89eecf SR	730
	731	&uart1 {
	732	status = "disabled";
	733	};
	734
	735	&uart2 {
31f0820a	736	interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
7a89eecf SR	737	pinctrl-names = "default";
	738	pinctrl-0 = <&uart2_pins>;
	739	};
	740
	741	&uart3 {
31f0820a	742	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
7a89eecf SR	743	pinctrl-names = "default";
	744	pinctrl-0 = <&uart3_pins>;
	745	};
1133420f TV	746
	747	&dss {
	748	status = "ok";
	749
	750	pinctrl-names = "default";
	751	pinctrl-0 = <&dss_sdi_pins>;
	752
	753	vdds_sdi-supply = <&vaux1>;
	754
	755	ports {
	756	#address-cells = <1>;
	757	#size-cells = <0>;
	758
	759	port@1 {
	760	reg = <1>;
	761
	762	sdi_out: endpoint {
	763	remote-endpoint = <&lcd_in>;
	764	datapairs = <2>;
	765	};
	766	};
	767	};
	768	};
	769
	770	&venc {
	771	status = "ok";
	772
	773	vdda-supply = <&vdac>;
	774
	775	port {
	776	venc_out: endpoint {
	777	remote-endpoint = <&tv_connector_in>;
	778	ti,channels = <1>;
	779	};
	780	};
	781	};
f7d0f2a0 SR	782
	783	&mcbsp2 {
	784	status = "ok";
	785	};
782e25a4 SR	786
	787	&ssi_port1 {
	788	pinctrl-names = "default";
	789	pinctrl-0 = <&ssi_pins>;
	790
	791	ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */
76ad4ac1 SR	792
	793	modem: hsi-client {
	794	compatible = "nokia,n900-modem";
	795
	796	pinctrl-names = "default";
	797	pinctrl-0 = <&modem_pins>;
	798
	799	hsi-channel-ids = <0>, <1>, <2>, <3>;
	800	hsi-channel-names = "mcsaab-control",
	801	"speech-control",
	802	"speech-data",
	803	"mcsaab-data";
	804	hsi-speed-kbps = <55000>;
	805	hsi-mode = "frame";
	806	hsi-flow = "synchronized";
	807	hsi-arb-mode = "round-robin";
	808
	809	interrupts-extended = <&gpio3 8 IRQ_TYPE_EDGE_FALLING>; /* 72 */
	810
	811	gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>, /* 70 */
	812	<&gpio3 9 GPIO_ACTIVE_HIGH>, /* 73 */
	813	<&gpio3 10 GPIO_ACTIVE_HIGH>, /* 74 */
	814	<&gpio3 11 GPIO_ACTIVE_HIGH>, /* 75 */
	815	<&gpio5 29 GPIO_ACTIVE_HIGH>; /* 157 */
	816	gpio-names = "cmt_apeslpx",
	817	"cmt_rst_rq",
	818	"cmt_en",
	819	"cmt_rst",
	820	"cmt_bsi";
	821	};
782e25a4 SR	822	};
	823
	824	&ssi_port2 {
	825	status = "disabled";
76ad4ac1	826	};