Commit | Line | Data |
---|---|---|
4b79197c NM |
1 | /* |
2 | * Copyright (C) 2011-2013 Texas Instruments Incorporated - http://www.ti.com/ | |
3 | * | |
4 | * This program is free software; you can redistribute it and/or modify | |
5 | * it under the terms of the GNU General Public License version 2 as | |
6 | * published by the Free Software Foundation. | |
7 | */ | |
98ef7957 | 8 | #include "elpida_ecb240abacn.dtsi" |
4b79197c NM |
9 | |
10 | / { | |
4b79197c NM |
11 | memory { |
12 | device_type = "memory"; | |
13 | reg = <0x80000000 0x40000000>; /* 1 GB */ | |
14 | }; | |
15 | ||
661637ca TV |
16 | aliases { |
17 | display0 = &dvi0; | |
18 | display1 = &hdmi0; | |
19 | }; | |
20 | ||
3818d7ca | 21 | leds: leds { |
4b79197c | 22 | compatible = "gpio-leds"; |
3818d7ca DM |
23 | pinctrl-names = "default"; |
24 | pinctrl-0 = < | |
25 | &led_wkgpio_pins | |
26 | >; | |
27 | ||
4b79197c NM |
28 | heartbeat { |
29 | label = "pandaboard::status1"; | |
6d624eab | 30 | gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; |
4b79197c NM |
31 | linux,default-trigger = "heartbeat"; |
32 | }; | |
33 | ||
34 | mmc { | |
35 | label = "pandaboard::status2"; | |
6d624eab | 36 | gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; |
4b79197c NM |
37 | linux,default-trigger = "mmc0"; |
38 | }; | |
39 | }; | |
40 | ||
41 | sound: sound { | |
42 | compatible = "ti,abe-twl6040"; | |
43 | ti,model = "PandaBoard"; | |
44 | ||
45 | ti,mclk-freq = <38400000>; | |
46 | ||
47 | ti,mcpdm = <&mcpdm>; | |
48 | ||
49 | ti,twl6040 = <&twl6040>; | |
50 | ||
51 | /* Audio routing */ | |
52 | ti,audio-routing = | |
53 | "Headset Stereophone", "HSOL", | |
54 | "Headset Stereophone", "HSOR", | |
55 | "Ext Spk", "HFL", | |
56 | "Ext Spk", "HFR", | |
57 | "Line Out", "AUXL", | |
58 | "Line Out", "AUXR", | |
59 | "HSMIC", "Headset Mic", | |
60 | "Headset Mic", "Headset Mic Bias", | |
61 | "AFML", "Line In", | |
62 | "AFMR", "Line In"; | |
63 | }; | |
5bd2100e | 64 | |
5bd2100e RQ |
65 | /* HS USB Port 1 Power */ |
66 | hsusb1_power: hsusb1_power_reg { | |
67 | compatible = "regulator-fixed"; | |
68 | regulator-name = "hsusb1_vbus"; | |
69 | regulator-min-microvolt = <3300000>; | |
70 | regulator-max-microvolt = <3300000>; | |
3a637e00 | 71 | gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>; /* gpio_1 */ |
5bd2100e RQ |
72 | startup-delay-us = <70000>; |
73 | enable-active-high; | |
6f569293 RQ |
74 | /* |
75 | * boot-on is required along with always-on as the | |
76 | * regulator framework doesn't enable the regulator | |
77 | * if boot-on is not there. | |
78 | */ | |
79 | regulator-always-on; | |
80 | regulator-boot-on; | |
5bd2100e RQ |
81 | }; |
82 | ||
83 | /* HS USB Host PHY on PORT 1 */ | |
84 | hsusb1_phy: hsusb1_phy { | |
85 | compatible = "usb-nop-xceiv"; | |
4cbdc86d | 86 | reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; /* gpio_62 */ |
5bd2100e | 87 | vcc-supply = <&hsusb1_power>; |
2ecf8aa1 RQ |
88 | clocks = <&auxclk3_ck>; |
89 | clock-names = "main_clk"; | |
5bd2100e RQ |
90 | clock-frequency = <19200000>; |
91 | }; | |
851320e3 TL |
92 | |
93 | /* regulator for wl12xx on sdio5 */ | |
94 | wl12xx_vmmc: wl12xx_vmmc { | |
95 | pinctrl-names = "default"; | |
96 | pinctrl-0 = <&wl12xx_gpio>; | |
97 | compatible = "regulator-fixed"; | |
98 | regulator-name = "vwl1271"; | |
99 | regulator-min-microvolt = <1800000>; | |
100 | regulator-max-microvolt = <1800000>; | |
3a637e00 | 101 | gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; |
851320e3 TL |
102 | startup-delay-us = <70000>; |
103 | enable-active-high; | |
104 | }; | |
661637ca TV |
105 | |
106 | tfp410: encoder@0 { | |
107 | compatible = "ti,tfp410"; | |
108 | powerdown-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; /* gpio_0 */ | |
109 | ||
110 | ports { | |
111 | #address-cells = <1>; | |
112 | #size-cells = <0>; | |
113 | ||
114 | port@0 { | |
115 | reg = <0>; | |
116 | ||
117 | tfp410_in: endpoint@0 { | |
118 | remote-endpoint = <&dpi_out>; | |
119 | }; | |
120 | }; | |
121 | ||
122 | port@1 { | |
123 | reg = <1>; | |
124 | ||
125 | tfp410_out: endpoint@0 { | |
126 | remote-endpoint = <&dvi_connector_in>; | |
127 | }; | |
128 | }; | |
129 | }; | |
130 | }; | |
131 | ||
132 | dvi0: connector@0 { | |
133 | compatible = "dvi-connector"; | |
134 | label = "dvi"; | |
135 | ||
136 | digital; | |
137 | ||
138 | ddc-i2c-bus = <&i2c3>; | |
139 | ||
140 | port { | |
141 | dvi_connector_in: endpoint { | |
142 | remote-endpoint = <&tfp410_out>; | |
143 | }; | |
144 | }; | |
145 | }; | |
146 | ||
147 | tpd12s015: encoder@1 { | |
148 | compatible = "ti,tpd12s015"; | |
149 | ||
150 | gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */ | |
151 | <&gpio2 9 GPIO_ACTIVE_HIGH>, /* 41, LS OE */ | |
152 | <&gpio2 31 GPIO_ACTIVE_HIGH>; /* 63, HPD */ | |
153 | ||
154 | ports { | |
155 | #address-cells = <1>; | |
156 | #size-cells = <0>; | |
157 | ||
158 | port@0 { | |
159 | reg = <0>; | |
160 | ||
161 | tpd12s015_in: endpoint@0 { | |
162 | remote-endpoint = <&hdmi_out>; | |
163 | }; | |
164 | }; | |
165 | ||
166 | port@1 { | |
167 | reg = <1>; | |
168 | ||
169 | tpd12s015_out: endpoint@0 { | |
170 | remote-endpoint = <&hdmi_connector_in>; | |
171 | }; | |
172 | }; | |
173 | }; | |
174 | }; | |
175 | ||
176 | hdmi0: connector@1 { | |
177 | compatible = "hdmi-connector"; | |
178 | label = "hdmi"; | |
179 | ||
180 | type = "a"; | |
181 | ||
182 | port { | |
183 | hdmi_connector_in: endpoint { | |
184 | remote-endpoint = <&tpd12s015_out>; | |
185 | }; | |
186 | }; | |
187 | }; | |
4b79197c NM |
188 | }; |
189 | ||
190 | &omap4_pmx_core { | |
191 | pinctrl-names = "default"; | |
192 | pinctrl-0 = < | |
0352bd1f TV |
193 | &dss_dpi_pins |
194 | &tfp410_pins | |
4b79197c NM |
195 | &dss_hdmi_pins |
196 | &tpd12s015_pins | |
5bd2100e | 197 | &hsusbb1_pins |
4b79197c NM |
198 | >; |
199 | ||
200 | twl6040_pins: pinmux_twl6040_pins { | |
201 | pinctrl-single,pins = < | |
0e3ae328 JMC |
202 | OMAP4_IOPAD(0x120, PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */ |
203 | OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */ | |
4b79197c NM |
204 | >; |
205 | }; | |
206 | ||
207 | mcpdm_pins: pinmux_mcpdm_pins { | |
208 | pinctrl-single,pins = < | |
0e3ae328 JMC |
209 | OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */ |
210 | OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */ | |
211 | OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */ | |
212 | OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */ | |
213 | OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */ | |
4b79197c NM |
214 | >; |
215 | }; | |
216 | ||
217 | mcbsp1_pins: pinmux_mcbsp1_pins { | |
218 | pinctrl-single,pins = < | |
0e3ae328 JMC |
219 | OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */ |
220 | OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */ | |
221 | OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */ | |
222 | OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */ | |
4b79197c NM |
223 | >; |
224 | }; | |
225 | ||
0352bd1f TV |
226 | dss_dpi_pins: pinmux_dss_dpi_pins { |
227 | pinctrl-single,pins = < | |
0e3ae328 JMC |
228 | OMAP4_IOPAD(0x162, PIN_OUTPUT | MUX_MODE5) /* dispc2_data23 */ |
229 | OMAP4_IOPAD(0x164, PIN_OUTPUT | MUX_MODE5) /* dispc2_data22 */ | |
230 | OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE5) /* dispc2_data21 */ | |
231 | OMAP4_IOPAD(0x168, PIN_OUTPUT | MUX_MODE5) /* dispc2_data20 */ | |
232 | OMAP4_IOPAD(0x16a, PIN_OUTPUT | MUX_MODE5) /* dispc2_data19 */ | |
233 | OMAP4_IOPAD(0x16c, PIN_OUTPUT | MUX_MODE5) /* dispc2_data18 */ | |
234 | OMAP4_IOPAD(0x16e, PIN_OUTPUT | MUX_MODE5) /* dispc2_data15 */ | |
235 | OMAP4_IOPAD(0x170, PIN_OUTPUT | MUX_MODE5) /* dispc2_data14 */ | |
236 | OMAP4_IOPAD(0x172, PIN_OUTPUT | MUX_MODE5) /* dispc2_data13 */ | |
237 | OMAP4_IOPAD(0x174, PIN_OUTPUT | MUX_MODE5) /* dispc2_data12 */ | |
238 | OMAP4_IOPAD(0x176, PIN_OUTPUT | MUX_MODE5) /* dispc2_data11 */ | |
239 | ||
240 | OMAP4_IOPAD(0x1b4, PIN_OUTPUT | MUX_MODE5) /* dispc2_data10 */ | |
241 | OMAP4_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE5) /* dispc2_data9 */ | |
242 | OMAP4_IOPAD(0x1b8, PIN_OUTPUT | MUX_MODE5) /* dispc2_data16 */ | |
243 | OMAP4_IOPAD(0x1ba, PIN_OUTPUT | MUX_MODE5) /* dispc2_data17 */ | |
244 | OMAP4_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE5) /* dispc2_hsync */ | |
245 | OMAP4_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE5) /* dispc2_pclk */ | |
246 | OMAP4_IOPAD(0x1c0, PIN_OUTPUT | MUX_MODE5) /* dispc2_vsync */ | |
247 | OMAP4_IOPAD(0x1c2, PIN_OUTPUT | MUX_MODE5) /* dispc2_de */ | |
248 | OMAP4_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE5) /* dispc2_data8 */ | |
249 | OMAP4_IOPAD(0x1c6, PIN_OUTPUT | MUX_MODE5) /* dispc2_data7 */ | |
250 | OMAP4_IOPAD(0x1c8, PIN_OUTPUT | MUX_MODE5) /* dispc2_data6 */ | |
251 | OMAP4_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE5) /* dispc2_data5 */ | |
252 | OMAP4_IOPAD(0x1cc, PIN_OUTPUT | MUX_MODE5) /* dispc2_data4 */ | |
253 | OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE5) /* dispc2_data3 */ | |
254 | ||
255 | OMAP4_IOPAD(0x1d0, PIN_OUTPUT | MUX_MODE5) /* dispc2_data2 */ | |
256 | OMAP4_IOPAD(0x1d2, PIN_OUTPUT | MUX_MODE5) /* dispc2_data1 */ | |
257 | OMAP4_IOPAD(0x1d4, PIN_OUTPUT | MUX_MODE5) /* dispc2_data0 */ | |
0352bd1f TV |
258 | >; |
259 | }; | |
260 | ||
261 | tfp410_pins: pinmux_tfp410_pins { | |
262 | pinctrl-single,pins = < | |
0e3ae328 | 263 | OMAP4_IOPAD(0x184, PIN_OUTPUT | MUX_MODE3) /* gpio_0 */ |
0352bd1f TV |
264 | >; |
265 | }; | |
266 | ||
4b79197c NM |
267 | dss_hdmi_pins: pinmux_dss_hdmi_pins { |
268 | pinctrl-single,pins = < | |
0e3ae328 JMC |
269 | OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ |
270 | OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */ | |
271 | OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */ | |
4b79197c NM |
272 | >; |
273 | }; | |
274 | ||
275 | tpd12s015_pins: pinmux_tpd12s015_pins { | |
276 | pinctrl-single,pins = < | |
0e3ae328 JMC |
277 | OMAP4_IOPAD(0x062, PIN_OUTPUT | MUX_MODE3) /* gpmc_a17.gpio_41 */ |
278 | OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3) /* gpmc_nbe1.gpio_60 */ | |
279 | OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */ | |
4b79197c NM |
280 | >; |
281 | }; | |
282 | ||
5bd2100e RQ |
283 | hsusbb1_pins: pinmux_hsusbb1_pins { |
284 | pinctrl-single,pins = < | |
0e3ae328 JMC |
285 | OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */ |
286 | OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4) /* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */ | |
287 | OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */ | |
288 | OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */ | |
289 | OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */ | |
290 | OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */ | |
291 | OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */ | |
292 | OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */ | |
293 | OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */ | |
294 | OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */ | |
295 | OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */ | |
296 | OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */ | |
5bd2100e RQ |
297 | >; |
298 | }; | |
299 | ||
4b79197c NM |
300 | i2c1_pins: pinmux_i2c1_pins { |
301 | pinctrl-single,pins = < | |
0e3ae328 JMC |
302 | OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ |
303 | OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ | |
4b79197c NM |
304 | >; |
305 | }; | |
306 | ||
307 | i2c2_pins: pinmux_i2c2_pins { | |
308 | pinctrl-single,pins = < | |
0e3ae328 JMC |
309 | OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */ |
310 | OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */ | |
4b79197c NM |
311 | >; |
312 | }; | |
313 | ||
314 | i2c3_pins: pinmux_i2c3_pins { | |
315 | pinctrl-single,pins = < | |
0e3ae328 JMC |
316 | OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ |
317 | OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ | |
4b79197c NM |
318 | >; |
319 | }; | |
320 | ||
321 | i2c4_pins: pinmux_i2c4_pins { | |
322 | pinctrl-single,pins = < | |
0e3ae328 JMC |
323 | OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */ |
324 | OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ | |
4b79197c NM |
325 | >; |
326 | }; | |
851320e3 TL |
327 | |
328 | /* | |
329 | * wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP | |
330 | * REVISIT: Are the pull-ups needed for GPIO 48 and 49? | |
331 | */ | |
332 | wl12xx_gpio: pinmux_wl12xx_gpio { | |
333 | pinctrl-single,pins = < | |
0e3ae328 JMC |
334 | OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3) /* gpmc_a19.gpio_43 */ |
335 | OMAP4_IOPAD(0x06c, PIN_OUTPUT | MUX_MODE3) /* gpmc_a22.gpio_46 */ | |
336 | OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a24.gpio_48 */ | |
337 | OMAP4_IOPAD(0x072, PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a25.gpio_49 */ | |
851320e3 TL |
338 | >; |
339 | }; | |
340 | ||
341 | /* wl12xx GPIO inputs and SDIO pins */ | |
342 | wl12xx_pins: pinmux_wl12xx_pins { | |
343 | pinctrl-single,pins = < | |
0e3ae328 JMC |
344 | OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3) /* gpmc_ncs2.gpio_52 */ |
345 | OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */ | |
346 | OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */ | |
347 | OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */ | |
348 | OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */ | |
349 | OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */ | |
350 | OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */ | |
351 | OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */ | |
851320e3 TL |
352 | >; |
353 | }; | |
3818d7ca DM |
354 | }; |
355 | ||
2ba2866f B |
356 | &omap4_pmx_wkup { |
357 | led_wkgpio_pins: pinmux_leds_wkpins { | |
358 | pinctrl-single,pins = < | |
0e3ae328 JMC |
359 | OMAP4_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */ |
360 | OMAP4_IOPAD(0x05c, PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */ | |
2ba2866f B |
361 | >; |
362 | }; | |
363 | }; | |
364 | ||
4b79197c NM |
365 | &i2c1 { |
366 | pinctrl-names = "default"; | |
367 | pinctrl-0 = <&i2c1_pins>; | |
368 | ||
369 | clock-frequency = <400000>; | |
370 | ||
371 | twl: twl@48 { | |
372 | reg = <0x48>; | |
8fea7d5a FV |
373 | /* IRQ# = 7 */ |
374 | interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */ | |
4b79197c NM |
375 | }; |
376 | ||
377 | twl6040: twl@4b { | |
378 | compatible = "ti,twl6040"; | |
379 | reg = <0x4b>; | |
aa986458 PU |
380 | |
381 | pinctrl-names = "default"; | |
382 | pinctrl-0 = <&twl6040_pins>; | |
383 | ||
8fea7d5a FV |
384 | /* IRQ# = 119 */ |
385 | interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */ | |
78eb938e | 386 | ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio line 127 */ |
4b79197c NM |
387 | |
388 | vio-supply = <&v1v8>; | |
389 | v2v1-supply = <&v2v1>; | |
390 | enable-active-high; | |
391 | }; | |
392 | }; | |
393 | ||
98ef7957 | 394 | #include "twl6030.dtsi" |
06a9ea5d | 395 | #include "twl6030_omap4.dtsi" |
4b79197c NM |
396 | |
397 | &i2c2 { | |
398 | pinctrl-names = "default"; | |
399 | pinctrl-0 = <&i2c2_pins>; | |
400 | ||
401 | clock-frequency = <400000>; | |
402 | }; | |
403 | ||
404 | &i2c3 { | |
405 | pinctrl-names = "default"; | |
406 | pinctrl-0 = <&i2c3_pins>; | |
407 | ||
408 | clock-frequency = <100000>; | |
409 | ||
410 | /* | |
411 | * Display monitor features are burnt in their EEPROM as EDID data. | |
412 | * The EEPROM is connected as I2C slave device. | |
413 | */ | |
414 | eeprom@50 { | |
415 | compatible = "ti,eeprom"; | |
416 | reg = <0x50>; | |
417 | }; | |
418 | }; | |
419 | ||
420 | &i2c4 { | |
421 | pinctrl-names = "default"; | |
422 | pinctrl-0 = <&i2c4_pins>; | |
423 | ||
424 | clock-frequency = <400000>; | |
425 | }; | |
426 | ||
427 | &mmc1 { | |
428 | vmmc-supply = <&vmmc>; | |
429 | bus-width = <8>; | |
430 | }; | |
431 | ||
432 | &mmc2 { | |
433 | status = "disabled"; | |
434 | }; | |
435 | ||
436 | &mmc3 { | |
437 | status = "disabled"; | |
438 | }; | |
439 | ||
440 | &mmc4 { | |
441 | status = "disabled"; | |
442 | }; | |
443 | ||
444 | &mmc5 { | |
851320e3 TL |
445 | pinctrl-names = "default"; |
446 | pinctrl-0 = <&wl12xx_pins>; | |
447 | vmmc-supply = <&wl12xx_vmmc>; | |
448 | non-removable; | |
4b79197c | 449 | bus-width = <4>; |
851320e3 | 450 | cap-power-off-card; |
99f84cae EP |
451 | |
452 | #address-cells = <1>; | |
453 | #size-cells = <0>; | |
454 | wlcore: wlcore@2 { | |
455 | compatible = "ti,wl1271"; | |
456 | reg = <2>; | |
457 | interrupt-parent = <&gpio2>; | |
458 | interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */ | |
459 | ref-clock-frequency = <38400000>; | |
460 | }; | |
4b79197c NM |
461 | }; |
462 | ||
463 | &emif1 { | |
464 | cs1-used; | |
465 | device-handle = <&elpida_ECB240ABACN>; | |
466 | }; | |
467 | ||
468 | &emif2 { | |
469 | cs1-used; | |
470 | device-handle = <&elpida_ECB240ABACN>; | |
471 | }; | |
472 | ||
aa986458 PU |
473 | &mcbsp1 { |
474 | pinctrl-names = "default"; | |
475 | pinctrl-0 = <&mcbsp1_pins>; | |
476 | status = "okay"; | |
477 | }; | |
478 | ||
aa986458 PU |
479 | &mcpdm { |
480 | pinctrl-names = "default"; | |
481 | pinctrl-0 = <&mcpdm_pins>; | |
482 | status = "okay"; | |
483 | }; | |
484 | ||
4b79197c NM |
485 | &twl_usb_comparator { |
486 | usb-supply = <&vusb>; | |
487 | }; | |
488 | ||
31f0820a | 489 | &uart2 { |
7136d457 | 490 | interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH |
31f0820a TL |
491 | &omap4_pmx_core OMAP4_UART2_RX>; |
492 | }; | |
493 | ||
494 | &uart3 { | |
7136d457 | 495 | interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH |
31f0820a TL |
496 | &omap4_pmx_core OMAP4_UART3_RX>; |
497 | }; | |
498 | ||
499 | &uart4 { | |
7136d457 | 500 | interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH |
31f0820a TL |
501 | &omap4_pmx_core OMAP4_UART4_RX>; |
502 | }; | |
503 | ||
4b79197c NM |
504 | &usb_otg_hs { |
505 | interface-type = <1>; | |
506 | mode = <3>; | |
507 | power = <50>; | |
508 | }; | |
5bd2100e RQ |
509 | |
510 | &usbhshost { | |
511 | port1-mode = "ehci-phy"; | |
512 | }; | |
513 | ||
514 | &usbhsehci { | |
515 | phys = <&hsusb1_phy>; | |
516 | }; | |
661637ca TV |
517 | |
518 | &dss { | |
519 | status = "ok"; | |
520 | ||
521 | port { | |
522 | dpi_out: endpoint { | |
523 | remote-endpoint = <&tfp410_in>; | |
524 | data-lines = <24>; | |
525 | }; | |
526 | }; | |
527 | }; | |
528 | ||
529 | &dsi2 { | |
530 | status = "ok"; | |
531 | vdd-supply = <&vcxio>; | |
532 | }; | |
533 | ||
534 | &hdmi { | |
535 | status = "ok"; | |
536 | vdda-supply = <&vdac>; | |
537 | ||
538 | port { | |
539 | hdmi_out: endpoint { | |
540 | remote-endpoint = <&tpd12s015_in>; | |
541 | }; | |
542 | }; | |
543 | }; |