[deliverable/linux.git] / arch / arm / boot / dts / omap4-panda-common.dtsi

/*
 * Copyright (C) 2011-2013 Texas Instruments Incorporated - http://www.ti.com/
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
#include "elpida_ecb240abacn.dtsi"

/ {
	memory {
		device_type = "memory";
		reg = <0x80000000 0x40000000>; /* 1 GB */
	};

	aliases {
		display0 = &dvi0;
		display1 = &hdmi0;
	};

	leds: leds {
		compatible = "gpio-leds";
		pinctrl-names = "default";
		pinctrl-0 = <
			&led_wkgpio_pins
		>;

		heartbeat {
			label = "pandaboard::status1";
			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "heartbeat";
		};

		mmc {
			label = "pandaboard::status2";
			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "mmc0";
		};
	};

	sound: sound {
		compatible = "ti,abe-twl6040";
		ti,model = "PandaBoard";

		ti,mclk-freq = <38400000>;

		ti,mcpdm = <&mcpdm>;

		ti,twl6040 = <&twl6040>;

		/* Audio routing */
		ti,audio-routing =
			"Headset Stereophone", "HSOL",
			"Headset Stereophone", "HSOR",
			"Ext Spk", "HFL",
			"Ext Spk", "HFR",
			"Line Out", "AUXL",
			"Line Out", "AUXR",
			"HSMIC", "Headset Mic",
			"Headset Mic", "Headset Mic Bias",
			"AFML", "Line In",
			"AFMR", "Line In";
	};

	/* HS USB Port 1 Power */
	hsusb1_power: hsusb1_power_reg {
		compatible = "regulator-fixed";
		regulator-name = "hsusb1_vbus";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;	/* gpio_1 */
		startup-delay-us = <70000>;
		enable-active-high;
		/*
		 * boot-on is required along with always-on as the
		 * regulator framework doesn't enable the regulator
		 * if boot-on is not there.
		 */
		regulator-always-on;
		regulator-boot-on;
	};

	/* HS USB Host PHY on PORT 1 */
	hsusb1_phy: hsusb1_phy {
		compatible = "usb-nop-xceiv";
		reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;   /* gpio_62 */
		vcc-supply = <&hsusb1_power>;
		clocks = <&auxclk3_ck>;
		clock-names = "main_clk";
		clock-frequency = <19200000>;
	};

	/* regulator for wl12xx on sdio5 */
	wl12xx_vmmc: wl12xx_vmmc {
		pinctrl-names = "default";
		pinctrl-0 = <&wl12xx_gpio>;
		compatible = "regulator-fixed";
		regulator-name = "vwl1271";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
		startup-delay-us = <70000>;
		enable-active-high;
	};

	tfp410: encoder0 {
		compatible = "ti,tfp410";
		powerdown-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;	/* gpio_0 */

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;

				tfp410_in: endpoint {
					remote-endpoint = <&dpi_out>;
				};
			};

			port@1 {
				reg = <1>;

				tfp410_out: endpoint {
					remote-endpoint = <&dvi_connector_in>;
				};
			};
		};
	};

	dvi0: connector0 {
		compatible = "dvi-connector";
		label = "dvi";

		digital;

		ddc-i2c-bus = <&i2c3>;

		port {
			dvi_connector_in: endpoint {
				remote-endpoint = <&tfp410_out>;
			};
		};
	};

	tpd12s015: encoder1 {
		compatible = "ti,tpd12s015";

		gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,	/* 60, CT CP HPD */
			<&gpio2 9 GPIO_ACTIVE_HIGH>,	/* 41, LS OE */
			<&gpio2 31 GPIO_ACTIVE_HIGH>;	/* 63, HPD */

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;

				tpd12s015_in: endpoint {
					remote-endpoint = <&hdmi_out>;
				};
			};

			port@1 {
				reg = <1>;

				tpd12s015_out: endpoint {
					remote-endpoint = <&hdmi_connector_in>;
				};
			};
		};
	};

	hdmi0: connector1 {
		compatible = "hdmi-connector";
		label = "hdmi";

		type = "a";

		port {
			hdmi_connector_in: endpoint {
				remote-endpoint = <&tpd12s015_out>;
			};
		};
	};
};

&omap4_pmx_core {
	pinctrl-names = "default";
	pinctrl-0 = <
			&dss_dpi_pins
			&tfp410_pins
			&dss_hdmi_pins
			&tpd12s015_pins
			&hsusbb1_pins
	>;

	twl6040_pins: pinmux_twl6040_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x120, PIN_OUTPUT | MUX_MODE3)	/* hdq_sio.gpio_127 */
			OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0)	/* sys_nirq2.sys_nirq2 */
		>;
	};

	mcpdm_pins: pinmux_mcpdm_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_ul_data.abe_pdm_ul_data */
			OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_dl_data.abe_pdm_dl_data */
			OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP   | MUX_MODE0)	/* abe_pdm_frame.abe_pdm_frame */
			OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_lb_clk.abe_pdm_lb_clk */
			OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
		>;
	};

	mcbsp1_pins: pinmux_mcbsp1_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
			OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dr.abe_mcbsp1_dr */
			OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dx.abe_mcbsp1_dx */
			OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
		>;
	};

	dss_dpi_pins: pinmux_dss_dpi_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x162, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data23 */
			OMAP4_IOPAD(0x164, PIN_OUTPUT | MUX_MODE5) 	/* dispc2_data22 */
			OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data21 */
			OMAP4_IOPAD(0x168, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data20 */
			OMAP4_IOPAD(0x16a, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data19 */
			OMAP4_IOPAD(0x16c, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data18 */
			OMAP4_IOPAD(0x16e, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data15 */
			OMAP4_IOPAD(0x170, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data14 */
			OMAP4_IOPAD(0x172, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data13 */
			OMAP4_IOPAD(0x174, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data12 */
			OMAP4_IOPAD(0x176, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data11 */

			OMAP4_IOPAD(0x1b4, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data10 */
			OMAP4_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data9 */
			OMAP4_IOPAD(0x1b8, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data16 */
			OMAP4_IOPAD(0x1ba, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data17 */
			OMAP4_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE5)	/* dispc2_hsync */
			OMAP4_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE5)	/* dispc2_pclk */
			OMAP4_IOPAD(0x1c0, PIN_OUTPUT | MUX_MODE5)	/* dispc2_vsync */
			OMAP4_IOPAD(0x1c2, PIN_OUTPUT | MUX_MODE5)	/* dispc2_de */
			OMAP4_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data8 */
			OMAP4_IOPAD(0x1c6, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data7 */
			OMAP4_IOPAD(0x1c8, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data6 */
			OMAP4_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data5 */
			OMAP4_IOPAD(0x1cc, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data4 */
			OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data3 */

			OMAP4_IOPAD(0x1d0, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data2 */
			OMAP4_IOPAD(0x1d2, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data1 */
			OMAP4_IOPAD(0x1d4, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data0 */
		>;
	};

	tfp410_pins: pinmux_tfp410_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x184, PIN_OUTPUT | MUX_MODE3)	/* gpio_0 */
		>;
	};

	dss_hdmi_pins: pinmux_dss_hdmi_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
			OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
			OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_sda.hdmi_sda */
		>;
	};

	tpd12s015_pins: pinmux_tpd12s015_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x062, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a17.gpio_41 */
			OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3)		/* gpmc_nbe1.gpio_60 */
			OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* hdmi_hpd.gpio_63 */
		>;
	};

	hsusbb1_pins: pinmux_hsusbb1_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
			OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4)		/* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
			OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
			OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
			OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
			OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
			OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
			OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
			OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
			OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
			OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
			OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
		>;
	};

	i2c1_pins: pinmux_i2c1_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
		>;
	};

	i2c2_pins: pinmux_i2c2_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
			OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
		>;
	};

	i2c3_pins: pinmux_i2c3_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
			OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
		>;
	};

	i2c4_pins: pinmux_i2c4_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
		>;
	};

	/*
	 * wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP
	 * REVISIT: Are the pull-ups needed for GPIO 48 and 49?
	 */
	wl12xx_gpio: pinmux_wl12xx_gpio {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 */
			OMAP4_IOPAD(0x06c, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a22.gpio_46 */
			OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a24.gpio_48 */
			OMAP4_IOPAD(0x072, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a25.gpio_49 */
		>;
	};

	/* wl12xx GPIO inputs and SDIO pins */
	wl12xx_pins: pinmux_wl12xx_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs2.gpio_52 */
			OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
			OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk.sdmmc5_clk */
			OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_cmd.sdmmc5_cmd */
			OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat0.sdmmc5_dat0 */
			OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1.sdmmc5_dat1 */
			OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2.sdmmc5_dat2 */
			OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3.sdmmc5_dat3 */
		>;
	};
};

&omap4_pmx_wkup {
	led_wkgpio_pins: pinmux_leds_wkpins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk7 */
			OMAP4_IOPAD(0x05c, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk8 */
		>;
	};
};

&i2c1 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c1_pins>;

	clock-frequency = <400000>;

	twl: twl@48 {
		reg = <0x48>;
		/* IRQ# = 7 */
		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
	};

	twl6040: twl@4b {
		compatible = "ti,twl6040";
		#clock-cells = <0>;
		reg = <0x4b>;

		pinctrl-names = "default";
		pinctrl-0 = <&twl6040_pins>;

		/* IRQ# = 119 */
		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
		ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>;  /* gpio line 127 */

		vio-supply = <&v1v8>;
		v2v1-supply = <&v2v1>;
		enable-active-high;
	};
};

#include "twl6030.dtsi"
#include "twl6030_omap4.dtsi"

&i2c2 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c2_pins>;

	clock-frequency = <400000>;
};

&i2c3 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c3_pins>;

	clock-frequency = <100000>;

	/*
	 * Display monitor features are burnt in their EEPROM as EDID data.
	 * The EEPROM is connected as I2C slave device.
	 */
	eeprom@50 {
		compatible = "ti,eeprom";
		reg = <0x50>;
	};
};

&i2c4 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c4_pins>;

	clock-frequency = <400000>;
};

&mmc1 {
	vmmc-supply = <&vmmc>;
	bus-width = <8>;
};

&mmc2 {
	status = "disabled";
};

&mmc3 {
	status = "disabled";
};

&mmc4 {
	status = "disabled";
};

&mmc5 {
	pinctrl-names = "default";
	pinctrl-0 = <&wl12xx_pins>;
	vmmc-supply = <&wl12xx_vmmc>;
	non-removable;
	bus-width = <4>;
	cap-power-off-card;

	#address-cells = <1>;
	#size-cells = <0>;
	wlcore: wlcore@2 {
		compatible = "ti,wl1271";
		reg = <2>;
		interrupt-parent = <&gpio2>;
		interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */
		ref-clock-frequency = <38400000>;
	};
};

&emif1 {
	cs1-used;
	device-handle = <&elpida_ECB240ABACN>;
};

&emif2 {
	cs1-used;
	device-handle = <&elpida_ECB240ABACN>;
};

&mcbsp1 {
	pinctrl-names = "default";
	pinctrl-0 = <&mcbsp1_pins>;
	status = "okay";
};

&mcpdm {
	pinctrl-names = "default";
	pinctrl-0 = <&mcpdm_pins>;

	clocks = <&twl6040>;
	clock-names = "pdmclk";

	status = "okay";
};

&twl_usb_comparator {
	usb-supply = <&vusb>;
};

&uart2 {
	interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
			       &omap4_pmx_core OMAP4_UART2_RX>;
};

&uart3 {
	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
			       &omap4_pmx_core OMAP4_UART3_RX>;
};

&uart4 {
	interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
			       &omap4_pmx_core OMAP4_UART4_RX>;
};

&usb_otg_hs {
	interface-type = <1>;
	mode = <3>;
	power = <50>;
};

&usbhshost {
	port1-mode = "ehci-phy";
};

&usbhsehci {
	phys = <&hsusb1_phy>;
};

&dss {
	status = "ok";

	port {
		dpi_out: endpoint {
			remote-endpoint = <&tfp410_in>;
			data-lines = <24>;
		};
	};
};

&dsi2 {
	status = "ok";
	vdd-supply = <&vcxio>;
};

&hdmi {
	status = "ok";
	vdda-supply = <&vdac>;

	port {
		hdmi_out: endpoint {
			remote-endpoint = <&tpd12s015_in>;
		};
	};
};
Commit	Line	Data
4b79197c NM	1	/*
	2	* Copyright (C) 2011-2013 Texas Instruments Incorporated - http://www.ti.com/
	3	*
	4	* This program is free software; you can redistribute it and/or modify
	5	* it under the terms of the GNU General Public License version 2 as
	6	* published by the Free Software Foundation.
	7	*/
98ef7957	8	#include "elpida_ecb240abacn.dtsi"
4b79197c NM	9
4b79197c NM	10	/ {
4b79197c NM	11	memory {
	12	device_type = "memory";
	13	reg = <0x80000000 0x40000000>; /* 1 GB */
	14	};
	15
661637ca TV	16	aliases {
	17	display0 = &dvi0;
	18	display1 = &hdmi0;
	19	};
	20
3818d7ca	21	leds: leds {
4b79197c	22	compatible = "gpio-leds";
3818d7ca DM	23	pinctrl-names = "default";
	24	pinctrl-0 = <
	25	&led_wkgpio_pins
	26	>;
	27
4b79197c NM	28	heartbeat {
4b79197c NM	29	label = "pandaboard::status1";
6d624eab	30	gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
4b79197c NM	31	linux,default-trigger = "heartbeat";
	32	};
	33
	34	mmc {
	35	label = "pandaboard::status2";
6d624eab	36	gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
4b79197c NM	37	linux,default-trigger = "mmc0";
	38	};
	39	};
	40
	41	sound: sound {
	42	compatible = "ti,abe-twl6040";
	43	ti,model = "PandaBoard";
	44
	45	ti,mclk-freq = <38400000>;
	46
	47	ti,mcpdm = <&mcpdm>;
	48
	49	ti,twl6040 = <&twl6040>;
	50
	51	/* Audio routing */
	52	ti,audio-routing =
	53	"Headset Stereophone", "HSOL",
	54	"Headset Stereophone", "HSOR",
	55	"Ext Spk", "HFL",
	56	"Ext Spk", "HFR",
	57	"Line Out", "AUXL",
	58	"Line Out", "AUXR",
	59	"HSMIC", "Headset Mic",
	60	"Headset Mic", "Headset Mic Bias",
	61	"AFML", "Line In",
	62	"AFMR", "Line In";
	63	};
5bd2100e	64
5bd2100e RQ	65	/* HS USB Port 1 Power */
	66	hsusb1_power: hsusb1_power_reg {
	67	compatible = "regulator-fixed";
	68	regulator-name = "hsusb1_vbus";
	69	regulator-min-microvolt = <3300000>;
	70	regulator-max-microvolt = <3300000>;
3a637e00	71	gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>; /* gpio_1 */
5bd2100e RQ	72	startup-delay-us = <70000>;
5bd2100e RQ	73	enable-active-high;
6f569293 RQ	74	/*
	75	* boot-on is required along with always-on as the
	76	* regulator framework doesn't enable the regulator
	77	* if boot-on is not there.
	78	*/
	79	regulator-always-on;
	80	regulator-boot-on;
5bd2100e RQ	81	};
	82
	83	/* HS USB Host PHY on PORT 1 */
	84	hsusb1_phy: hsusb1_phy {
	85	compatible = "usb-nop-xceiv";
4cbdc86d	86	reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; /* gpio_62 */
5bd2100e	87	vcc-supply = <&hsusb1_power>;
2ecf8aa1 RQ	88	clocks = <&auxclk3_ck>;
2ecf8aa1 RQ	89	clock-names = "main_clk";
5bd2100e RQ	90	clock-frequency = <19200000>;
5bd2100e RQ	91	};
851320e3 TL	92
	93	/* regulator for wl12xx on sdio5 */
	94	wl12xx_vmmc: wl12xx_vmmc {
	95	pinctrl-names = "default";
	96	pinctrl-0 = <&wl12xx_gpio>;
	97	compatible = "regulator-fixed";
	98	regulator-name = "vwl1271";
	99	regulator-min-microvolt = <1800000>;
	100	regulator-max-microvolt = <1800000>;
3a637e00	101	gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
851320e3 TL	102	startup-delay-us = <70000>;
	103	enable-active-high;
	104	};
661637ca	105
9e19d0d1	106	tfp410: encoder0 {
661637ca TV	107	compatible = "ti,tfp410";
	108	powerdown-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; /* gpio_0 */
	109
	110	ports {
	111	#address-cells = <1>;
	112	#size-cells = <0>;
	113
	114	port@0 {
	115	reg = <0>;
	116
9e19d0d1	117	tfp410_in: endpoint {
661637ca TV	118	remote-endpoint = <&dpi_out>;
	119	};
	120	};
	121
	122	port@1 {
	123	reg = <1>;
	124
9e19d0d1	125	tfp410_out: endpoint {
661637ca TV	126	remote-endpoint = <&dvi_connector_in>;
	127	};
	128	};
	129	};
	130	};
	131
9e19d0d1	132	dvi0: connector0 {
661637ca TV	133	compatible = "dvi-connector";
	134	label = "dvi";
	135
	136	digital;
	137
	138	ddc-i2c-bus = <&i2c3>;
	139
	140	port {
	141	dvi_connector_in: endpoint {
	142	remote-endpoint = <&tfp410_out>;
	143	};
	144	};
	145	};
	146
9e19d0d1	147	tpd12s015: encoder1 {
661637ca TV	148	compatible = "ti,tpd12s015";
	149
	150	gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */
	151	<&gpio2 9 GPIO_ACTIVE_HIGH>, /* 41, LS OE */
	152	<&gpio2 31 GPIO_ACTIVE_HIGH>; /* 63, HPD */
	153
	154	ports {
	155	#address-cells = <1>;
	156	#size-cells = <0>;
	157
	158	port@0 {
	159	reg = <0>;
	160
9e19d0d1	161	tpd12s015_in: endpoint {
661637ca TV	162	remote-endpoint = <&hdmi_out>;
	163	};
	164	};
	165
	166	port@1 {
	167	reg = <1>;
	168
9e19d0d1	169	tpd12s015_out: endpoint {
661637ca TV	170	remote-endpoint = <&hdmi_connector_in>;
	171	};
	172	};
	173	};
	174	};
	175
9e19d0d1	176	hdmi0: connector1 {
661637ca TV	177	compatible = "hdmi-connector";
	178	label = "hdmi";
	179
	180	type = "a";
	181
	182	port {
	183	hdmi_connector_in: endpoint {
	184	remote-endpoint = <&tpd12s015_out>;
	185	};
	186	};
	187	};
4b79197c NM	188	};
	189
	190	&omap4_pmx_core {
	191	pinctrl-names = "default";
	192	pinctrl-0 = <
0352bd1f TV	193	&dss_dpi_pins
0352bd1f TV	194	&tfp410_pins
4b79197c NM	195	&dss_hdmi_pins
4b79197c NM	196	&tpd12s015_pins
5bd2100e	197	&hsusbb1_pins
4b79197c NM	198	>;
	199
	200	twl6040_pins: pinmux_twl6040_pins {
	201	pinctrl-single,pins = <
0e3ae328 JMC	202	OMAP4_IOPAD(0x120, PIN_OUTPUT \| MUX_MODE3) /* hdq_sio.gpio_127 */
0e3ae328 JMC	203	OMAP4_IOPAD(0x1a0, PIN_INPUT \| MUX_MODE0) /* sys_nirq2.sys_nirq2 */
4b79197c NM	204	>;
	205	};
	206
	207	mcpdm_pins: pinmux_mcpdm_pins {
	208	pinctrl-single,pins = <
0e3ae328 JMC	209	OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN \| MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */
	210	OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN \| MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */
	211	OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP \| MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */
	212	OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN \| MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */
	213	OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN \| MUX_MODE0) /* abe_clks.abe_clks */
4b79197c NM	214	>;
	215	};
	216
	217	mcbsp1_pins: pinmux_mcbsp1_pins {
	218	pinctrl-single,pins = <
0e3ae328 JMC	219	OMAP4_IOPAD(0x0fe, PIN_INPUT \| MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
	220	OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN \| MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */
	221	OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN \| MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */
	222	OMAP4_IOPAD(0x104, PIN_INPUT \| MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
4b79197c NM	223	>;
	224	};
	225
0352bd1f TV	226	dss_dpi_pins: pinmux_dss_dpi_pins {
0352bd1f TV	227	pinctrl-single,pins = <
0e3ae328 JMC	228	OMAP4_IOPAD(0x162, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data23 */
	229	OMAP4_IOPAD(0x164, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data22 */
	230	OMAP4_IOPAD(0x166, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data21 */
	231	OMAP4_IOPAD(0x168, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data20 */
	232	OMAP4_IOPAD(0x16a, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data19 */
	233	OMAP4_IOPAD(0x16c, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data18 */
	234	OMAP4_IOPAD(0x16e, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data15 */
	235	OMAP4_IOPAD(0x170, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data14 */
	236	OMAP4_IOPAD(0x172, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data13 */
	237	OMAP4_IOPAD(0x174, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data12 */
	238	OMAP4_IOPAD(0x176, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data11 */
	239
	240	OMAP4_IOPAD(0x1b4, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data10 */
	241	OMAP4_IOPAD(0x1b6, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data9 */
	242	OMAP4_IOPAD(0x1b8, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data16 */
	243	OMAP4_IOPAD(0x1ba, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data17 */
	244	OMAP4_IOPAD(0x1bc, PIN_OUTPUT \| MUX_MODE5) /* dispc2_hsync */
	245	OMAP4_IOPAD(0x1be, PIN_OUTPUT \| MUX_MODE5) /* dispc2_pclk */
	246	OMAP4_IOPAD(0x1c0, PIN_OUTPUT \| MUX_MODE5) /* dispc2_vsync */
	247	OMAP4_IOPAD(0x1c2, PIN_OUTPUT \| MUX_MODE5) /* dispc2_de */
	248	OMAP4_IOPAD(0x1c4, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data8 */
	249	OMAP4_IOPAD(0x1c6, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data7 */
	250	OMAP4_IOPAD(0x1c8, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data6 */
	251	OMAP4_IOPAD(0x1ca, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data5 */
	252	OMAP4_IOPAD(0x1cc, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data4 */
	253	OMAP4_IOPAD(0x1ce, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data3 */
	254
	255	OMAP4_IOPAD(0x1d0, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data2 */
	256	OMAP4_IOPAD(0x1d2, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data1 */
	257	OMAP4_IOPAD(0x1d4, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data0 */
0352bd1f TV	258	>;
	259	};
	260
	261	tfp410_pins: pinmux_tfp410_pins {
	262	pinctrl-single,pins = <
0e3ae328	263	OMAP4_IOPAD(0x184, PIN_OUTPUT \| MUX_MODE3) /* gpio_0 */
0352bd1f TV	264	>;
	265	};
	266
4b79197c NM	267	dss_hdmi_pins: pinmux_dss_hdmi_pins {
4b79197c NM	268	pinctrl-single,pins = <
0e3ae328 JMC	269	OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP \| MUX_MODE0) /* hdmi_cec.hdmi_cec */
	270	OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP \| MUX_MODE0) /* hdmi_scl.hdmi_scl */
	271	OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP \| MUX_MODE0) /* hdmi_sda.hdmi_sda */
4b79197c NM	272	>;
	273	};
	274
	275	tpd12s015_pins: pinmux_tpd12s015_pins {
	276	pinctrl-single,pins = <
0e3ae328 JMC	277	OMAP4_IOPAD(0x062, PIN_OUTPUT \| MUX_MODE3) /* gpmc_a17.gpio_41 */
	278	OMAP4_IOPAD(0x088, PIN_OUTPUT \| MUX_MODE3) /* gpmc_nbe1.gpio_60 */
	279	OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN \| MUX_MODE3) /* hdmi_hpd.gpio_63 */
4b79197c NM	280	>;
	281	};
	282
5bd2100e RQ	283	hsusbb1_pins: pinmux_hsusbb1_pins {
5bd2100e RQ	284	pinctrl-single,pins = <
0e3ae328 JMC	285	OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN \| MUX_MODE4) /* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
	286	OMAP4_IOPAD(0x0c4, PIN_OUTPUT \| MUX_MODE4) /* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
	287	OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN \| MUX_MODE4) /* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
	288	OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN \| MUX_MODE4) /* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
	289	OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN \| MUX_MODE4) /* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
	290	OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN \| MUX_MODE4) /* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
	291	OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN \| MUX_MODE4) /* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
	292	OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN \| MUX_MODE4) /* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
	293	OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN \| MUX_MODE4) /* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
	294	OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN \| MUX_MODE4) /* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
	295	OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN \| MUX_MODE4) /* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
	296	OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN \| MUX_MODE4) /* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
5bd2100e RQ	297	>;
	298	};
	299
4b79197c NM	300	i2c1_pins: pinmux_i2c1_pins {
4b79197c NM	301	pinctrl-single,pins = <
0e3ae328 JMC	302	OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c1_scl */
0e3ae328 JMC	303	OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c1_sda */
4b79197c NM	304	>;
	305	};
	306
	307	i2c2_pins: pinmux_i2c2_pins {
	308	pinctrl-single,pins = <
0e3ae328 JMC	309	OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c2_scl */
0e3ae328 JMC	310	OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c2_sda */
4b79197c NM	311	>;
	312	};
	313
	314	i2c3_pins: pinmux_i2c3_pins {
	315	pinctrl-single,pins = <
0e3ae328 JMC	316	OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c3_scl */
0e3ae328 JMC	317	OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c3_sda */
4b79197c NM	318	>;
	319	};
	320
	321	i2c4_pins: pinmux_i2c4_pins {
	322	pinctrl-single,pins = <
0e3ae328 JMC	323	OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c4_scl */
0e3ae328 JMC	324	OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c4_sda */
4b79197c NM	325	>;
4b79197c NM	326	};
851320e3 TL	327
	328	/*
	329	* wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP
	330	* REVISIT: Are the pull-ups needed for GPIO 48 and 49?
	331	*/
	332	wl12xx_gpio: pinmux_wl12xx_gpio {
	333	pinctrl-single,pins = <
0e3ae328 JMC	334	OMAP4_IOPAD(0x066, PIN_OUTPUT \| MUX_MODE3) /* gpmc_a19.gpio_43 */
	335	OMAP4_IOPAD(0x06c, PIN_OUTPUT \| MUX_MODE3) /* gpmc_a22.gpio_46 */
	336	OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLUP \| MUX_MODE3) /* gpmc_a24.gpio_48 */
	337	OMAP4_IOPAD(0x072, PIN_OUTPUT_PULLUP \| MUX_MODE3) /* gpmc_a25.gpio_49 */
851320e3 TL	338	>;
	339	};
	340
	341	/* wl12xx GPIO inputs and SDIO pins */
	342	wl12xx_pins: pinmux_wl12xx_pins {
	343	pinctrl-single,pins = <
0e3ae328 JMC	344	OMAP4_IOPAD(0x078, PIN_INPUT \| MUX_MODE3) /* gpmc_ncs2.gpio_52 */
	345	OMAP4_IOPAD(0x07a, PIN_INPUT \| MUX_MODE3) /* gpmc_ncs3.gpio_53 */
	346	OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
	347	OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */
	348	OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */
	349	OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */
	350	OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */
	351	OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */
851320e3 TL	352	>;
851320e3 TL	353	};
3818d7ca DM	354	};
3818d7ca DM	355
2ba2866f B	356	&omap4_pmx_wkup {
	357	led_wkgpio_pins: pinmux_leds_wkpins {
	358	pinctrl-single,pins = <
0e3ae328 JMC	359	OMAP4_IOPAD(0x05a, PIN_OUTPUT \| MUX_MODE3) /* gpio_wk7 */
0e3ae328 JMC	360	OMAP4_IOPAD(0x05c, PIN_OUTPUT \| MUX_MODE3) /* gpio_wk8 */
2ba2866f B	361	>;
	362	};
	363	};
	364
4b79197c NM	365	&i2c1 {
	366	pinctrl-names = "default";
	367	pinctrl-0 = <&i2c1_pins>;
	368
	369	clock-frequency = <400000>;
	370
	371	twl: twl@48 {
	372	reg = <0x48>;
8fea7d5a FV	373	/* IRQ# = 7 */
8fea7d5a FV	374	interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
4b79197c NM	375	};
	376
	377	twl6040: twl@4b {
	378	compatible = "ti,twl6040";
2ab60a38	379	#clock-cells = <0>;
4b79197c	380	reg = <0x4b>;
aa986458 PU	381
	382	pinctrl-names = "default";
	383	pinctrl-0 = <&twl6040_pins>;
	384
8fea7d5a FV	385	/* IRQ# = 119 */
8fea7d5a FV	386	interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
78eb938e	387	ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio line 127 */
4b79197c NM	388
	389	vio-supply = <&v1v8>;
	390	v2v1-supply = <&v2v1>;
	391	enable-active-high;
	392	};
	393	};
	394
98ef7957	395	#include "twl6030.dtsi"
06a9ea5d	396	#include "twl6030_omap4.dtsi"
4b79197c NM	397
	398	&i2c2 {
	399	pinctrl-names = "default";
	400	pinctrl-0 = <&i2c2_pins>;
	401
	402	clock-frequency = <400000>;
	403	};
	404
	405	&i2c3 {
	406	pinctrl-names = "default";
	407	pinctrl-0 = <&i2c3_pins>;
	408
	409	clock-frequency = <100000>;
	410
	411	/*
	412	* Display monitor features are burnt in their EEPROM as EDID data.
	413	* The EEPROM is connected as I2C slave device.
	414	*/
	415	eeprom@50 {
	416	compatible = "ti,eeprom";
	417	reg = <0x50>;
	418	};
	419	};
	420
	421	&i2c4 {
	422	pinctrl-names = "default";
	423	pinctrl-0 = <&i2c4_pins>;
	424
	425	clock-frequency = <400000>;
	426	};
	427
	428	&mmc1 {
	429	vmmc-supply = <&vmmc>;
	430	bus-width = <8>;
	431	};
	432
	433	&mmc2 {
	434	status = "disabled";
	435	};
	436
	437	&mmc3 {
	438	status = "disabled";
	439	};
	440
	441	&mmc4 {
	442	status = "disabled";
	443	};
	444
	445	&mmc5 {
851320e3 TL	446	pinctrl-names = "default";
	447	pinctrl-0 = <&wl12xx_pins>;
	448	vmmc-supply = <&wl12xx_vmmc>;
	449	non-removable;
4b79197c	450	bus-width = <4>;
851320e3	451	cap-power-off-card;
99f84cae EP	452
	453	#address-cells = <1>;
	454	#size-cells = <0>;
	455	wlcore: wlcore@2 {
	456	compatible = "ti,wl1271";
	457	reg = <2>;
	458	interrupt-parent = <&gpio2>;
	459	interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */
	460	ref-clock-frequency = <38400000>;
	461	};
4b79197c NM	462	};
	463
	464	&emif1 {
	465	cs1-used;
	466	device-handle = <&elpida_ECB240ABACN>;
	467	};
	468
	469	&emif2 {
	470	cs1-used;
	471	device-handle = <&elpida_ECB240ABACN>;
	472	};
	473
aa986458 PU	474	&mcbsp1 {
	475	pinctrl-names = "default";
	476	pinctrl-0 = <&mcbsp1_pins>;
	477	status = "okay";
	478	};
	479
aa986458 PU	480	&mcpdm {
	481	pinctrl-names = "default";
	482	pinctrl-0 = <&mcpdm_pins>;
2ab60a38 PU	483
	484	clocks = <&twl6040>;
	485	clock-names = "pdmclk";
	486
aa986458 PU	487	status = "okay";
	488	};
	489
4b79197c NM	490	&twl_usb_comparator {
	491	usb-supply = <&vusb>;
	492	};
	493
31f0820a	494	&uart2 {
7136d457	495	interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
31f0820a TL	496	&omap4_pmx_core OMAP4_UART2_RX>;
	497	};
	498
	499	&uart3 {
7136d457	500	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
31f0820a TL	501	&omap4_pmx_core OMAP4_UART3_RX>;
	502	};
	503
	504	&uart4 {
7136d457	505	interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
31f0820a TL	506	&omap4_pmx_core OMAP4_UART4_RX>;
	507	};
	508
4b79197c NM	509	&usb_otg_hs {
	510	interface-type = <1>;
	511	mode = <3>;
	512	power = <50>;
	513	};
5bd2100e RQ	514
	515	&usbhshost {
	516	port1-mode = "ehci-phy";
	517	};
	518
	519	&usbhsehci {
	520	phys = <&hsusb1_phy>;
	521	};
661637ca TV	522
	523	&dss {
	524	status = "ok";
	525
	526	port {
	527	dpi_out: endpoint {
	528	remote-endpoint = <&tfp410_in>;
	529	data-lines = <24>;
	530	};
	531	};
	532	};
	533
	534	&dsi2 {
	535	status = "ok";
	536	vdd-supply = <&vcxio>;
	537	};
	538
	539	&hdmi {
	540	status = "ok";
	541	vdda-supply = <&vdac>;
	542
	543	port {
	544	hdmi_out: endpoint {
	545	remote-endpoint = <&tpd12s015_in>;
	546	};
	547	};
	548	};