[deliverable/linux.git] / arch / arm / boot / dts / omap4-sdp.dts

/*
 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
/dts-v1/;

#include "omap443x.dtsi"
#include "elpida_ecb240abacn.dtsi"

/ {
	model = "TI OMAP4 SDP board";
	compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4";

	memory {
		device_type = "memory";
		reg = <0x80000000 0x40000000>; /* 1 GB */
	};

	vdd_eth: fixedregulator-vdd-eth {
		compatible = "regulator-fixed";
		regulator-name = "VDD_ETH";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		gpio = <&gpio2 16 0>;  /* gpio line 48 */
		enable-active-high;
		regulator-boot-on;
	};

	vbat: fixedregulator-vbat {
		compatible = "regulator-fixed";
		regulator-name = "VBAT";
		regulator-min-microvolt = <3750000>;
		regulator-max-microvolt = <3750000>;
		regulator-boot-on;
	};

	leds {
		compatible = "gpio-leds";
		debug0 {
			label = "omap4:green:debug0";
			gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; /* 61 */
		};

		debug1 {
			label = "omap4:green:debug1";
			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; /* 30 */
		};

		debug2 {
			label = "omap4:green:debug2";
			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; /* 7 */
		};

		debug3 {
			label = "omap4:green:debug3";
			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* 8 */
		};

		debug4 {
			label = "omap4:green:debug4";
			gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; /* 50 */
		};

		user1 {
			label = "omap4:blue:user";
			gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* 169 */
		};

		user2 {
			label = "omap4:red:user";
			gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; /* 170 */
		};

		user3 {
			label = "omap4:green:user";
			gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* 139 */
		};
	};

	pwmleds {
		compatible = "pwm-leds";
		kpad {
			label = "omap4::keypad";
			pwms = <&twl_pwm 0 7812500>;
			max-brightness = <127>;
		};

		charging {
			label = "omap4:green:chrg";
			pwms = <&twl_pwmled 0 7812500>;
			max-brightness = <255>;
		};
	};

	backlight {
		compatible = "pwm-backlight";
		pwms = <&twl_pwm 1 7812500>;
		brightness-levels = <
				0 10 20 30 40
				50 60 70 80 90
				100 110 120 127
				>;
		default-brightness-level = <13>;
	};

	sound {
		compatible = "ti,abe-twl6040";
		ti,model = "SDP4430";

		ti,jack-detection = <1>;
		ti,mclk-freq = <38400000>;

		ti,mcpdm = <&mcpdm>;
		ti,dmic = <&dmic>;

		ti,twl6040 = <&twl6040>;

		/* Audio routing */
		ti,audio-routing =
			"Headset Stereophone", "HSOL",
			"Headset Stereophone", "HSOR",
			"Earphone Spk", "EP",
			"Ext Spk", "HFL",
			"Ext Spk", "HFR",
			"Line Out", "AUXL",
			"Line Out", "AUXR",
			"Vibrator", "VIBRAL",
			"Vibrator", "VIBRAR",
			"HSMIC", "Headset Mic",
			"Headset Mic", "Headset Mic Bias",
			"MAINMIC", "Main Handset Mic",
			"Main Handset Mic", "Main Mic Bias",
			"SUBMIC", "Sub Handset Mic",
			"Sub Handset Mic", "Main Mic Bias",
			"AFML", "Line In",
			"AFMR", "Line In",
			"DMic", "Digital Mic",
			"Digital Mic", "Digital Mic1 Bias";
	};

	/* regulator for wl12xx on sdio5 */
	wl12xx_vmmc: wl12xx_vmmc {
		pinctrl-names = "default";
		pinctrl-0 = <&wl12xx_gpio>;
		compatible = "regulator-fixed";
		regulator-name = "vwl1271";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		gpio = <&gpio2 22 0>;
		startup-delay-us = <70000>;
		enable-active-high;
	};
};

&omap4_pmx_wkup {
	pinctrl-names = "default";
	pinctrl-0 = <
			&twl6030_wkup_pins
	>;

	twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
		pinctrl-single,pins = <
			0x14 (PIN_OUTPUT | MUX_MODE2)		/* fref_clk0_out.sys_drm_msecure */
		>;
	};
};

&omap4_pmx_core {
	pinctrl-names = "default";
	pinctrl-0 = <
			&twl6030_pins
			&twl6040_pins
			&mcpdm_pins
			&dmic_pins
			&mcbsp1_pins
			&mcbsp2_pins
			&dss_hdmi_pins
			&tpd12s015_pins
	>;

	uart2_pins: pinmux_uart2_pins {
		pinctrl-single,pins = <
			0xd8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
			0xda (PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
			0xdc (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_rx.uart2_rx */
			0xde (PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
		>;
	};

	uart3_pins: pinmux_uart3_pins {
		pinctrl-single,pins = <
			0x100 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
			0x102 (PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
			0x104 (PIN_INPUT | MUX_MODE0)		/* uart3_rx_irrx.uart3_rx_irrx */
			0x106 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
		>;
	};

	uart4_pins: pinmux_uart4_pins {
		pinctrl-single,pins = <
			0x11c (PIN_INPUT | MUX_MODE0)		/* uart4_rx.uart4_rx */
			0x11e (PIN_OUTPUT | MUX_MODE0)		/* uart4_tx.uart4_tx */
		>;
	};

	twl6030_pins: pinmux_twl6030_pins {
		pinctrl-single,pins = <
			0x15e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0)	/* sys_nirq1.sys_nirq1 */
		>;
	};

	twl6040_pins: pinmux_twl6040_pins {
		pinctrl-single,pins = <
			0xe0 (PIN_OUTPUT | MUX_MODE3)		/* hdq_sio.gpio_127 */
			0x160 (PIN_INPUT | MUX_MODE0)		/* sys_nirq2.sys_nirq2 */
		>;
	};

	mcpdm_pins: pinmux_mcpdm_pins {
		pinctrl-single,pins = <
			0xc6 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_ul_data.abe_pdm_ul_data */
			0xc8 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_dl_data.abe_pdm_dl_data */
			0xca (PIN_INPUT_PULLUP | MUX_MODE0)	/* abe_pdm_frame.abe_pdm_frame */
			0xcc (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_lb_clk.abe_pdm_lb_clk */
			0xce (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
		>;
	};

	dmic_pins: pinmux_dmic_pins {
		pinctrl-single,pins = <
			0xd0 (PIN_OUTPUT | MUX_MODE0)		/* abe_dmic_clk1.abe_dmic_clk1 */
			0xd2 (PIN_INPUT | MUX_MODE0)		/* abe_dmic_din1.abe_dmic_din1 */
			0xd4 (PIN_INPUT | MUX_MODE0)		/* abe_dmic_din2.abe_dmic_din2 */
			0xd6 (PIN_INPUT | MUX_MODE0)		/* abe_dmic_din3.abe_dmic_din3 */
		>;
	};

	mcbsp1_pins: pinmux_mcbsp1_pins {
		pinctrl-single,pins = <
			0xbe (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
			0xc0 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dr.abe_mcbsp1_dr */
			0xc2 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dx.abe_mcbsp1_dx */
			0xc4 (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
		>;
	};

	mcbsp2_pins: pinmux_mcbsp2_pins {
		pinctrl-single,pins = <
			0xb6 (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp2_clkx.abe_mcbsp2_clkx */
			0xb8 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp2_dr.abe_mcbsp2_dr */
			0xba (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp2_dx.abe_mcbsp2_dx */
			0xbc (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp2_fsx.abe_mcbsp2_fsx */
		>;
	};

	mcspi1_pins: pinmux_mcspi1_pins {
		pinctrl-single,pins = <
			0xf2 (PIN_INPUT | MUX_MODE0)		/*  mcspi1_clk.mcspi1_clk */
			0xf4 (PIN_INPUT | MUX_MODE0)		/*  mcspi1_somi.mcspi1_somi */
			0xf6 (PIN_INPUT | MUX_MODE0)		/*  mcspi1_simo.mcspi1_simo */
			0xf8 (PIN_INPUT | MUX_MODE0)		/*  mcspi1_cs0.mcspi1_cs0 */
		>;
	};

	dss_hdmi_pins: pinmux_dss_hdmi_pins {
		pinctrl-single,pins = <
			0x5a (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
			0x5c (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
			0x5e (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_sda.hdmi_sda */
		>;
	};

	tpd12s015_pins: pinmux_tpd12s015_pins {
		pinctrl-single,pins = <
			0x22 (PIN_OUTPUT | MUX_MODE3)		/* gpmc_a17.gpio_41 */
			0x48 (PIN_OUTPUT | MUX_MODE3)		/* gpmc_nbe1.gpio_60 */
			0x58 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* hdmi_hpd.gpio_63 */
		>;
	};

	i2c1_pins: pinmux_i2c1_pins {
		pinctrl-single,pins = <
			0xe2 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
			0xe4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
		>;
	};

	i2c2_pins: pinmux_i2c2_pins {
		pinctrl-single,pins = <
			0xe6 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
			0xe8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
		>;
	};

	i2c3_pins: pinmux_i2c3_pins {
		pinctrl-single,pins = <
			0xea (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
			0xec (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
		>;
	};

	i2c4_pins: pinmux_i2c4_pins {
		pinctrl-single,pins = <
			0xee (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
		>;
	};

	/* wl12xx GPIO output for WLAN_EN */
	wl12xx_gpio: pinmux_wl12xx_gpio {
		pinctrl-single,pins = <
			0x3c (PIN_OUTPUT | MUX_MODE3)		/* gpmc_nwp.gpio_54 */
		>;
	};

	/* wl12xx GPIO inputs and SDIO pins */
	wl12xx_pins: pinmux_wl12xx_pins {
		pinctrl-single,pins = <
			0x3a (PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
			0x108 (PIN_OUTPUT | MUX_MODE3)		/* sdmmc5_clk.sdmmc5_clk */
			0x10a (PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc5_cmd.sdmmc5_cmd */
			0x10c (PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc5_dat0.sdmmc5_dat0 */
			0x10e (PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc5_dat1.sdmmc5_dat1 */
			0x110 (PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc5_dat2.sdmmc5_dat2 */
			0x112 (PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc5_dat3.sdmmc5_dat3 */
		>;
	};
};

&i2c1 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c1_pins>;

	clock-frequency = <400000>;

	twl: twl@48 {
		reg = <0x48>;
		/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
		interrupt-parent = <&gic>;
	};

	twl6040: twl@4b {
		compatible = "ti,twl6040";
		reg = <0x4b>;
		/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
		interrupt-parent = <&gic>;
		ti,audpwron-gpio = <&gpio4 31 0>;  /* gpio line 127 */

		vio-supply = <&v1v8>;
		v2v1-supply = <&v2v1>;
		enable-active-high;

		/* regulators for vibra motor */
		vddvibl-supply = <&vbat>;
		vddvibr-supply = <&vbat>;

		vibra {
			/* Vibra driver, motor resistance parameters */
			ti,vibldrv-res = <8>;
			ti,vibrdrv-res = <3>;
			ti,viblmotor-res = <10>;
			ti,vibrmotor-res = <10>;
		};
	};
};

#include "twl6030.dtsi"

&i2c2 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c2_pins>;

	clock-frequency = <400000>;
};

&i2c3 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c3_pins>;

	clock-frequency = <400000>;

	/*
	 * Temperature Sensor
	 * http://www.ti.com/lit/ds/symlink/tmp105.pdf
	 */
	tmp105@48 {
		compatible = "ti,tmp105";
		reg = <0x48>;
	};

	/*
	 * Ambient Light Sensor
	 * http://www.rohm.com/products/databook/sensor/pdf/bh1780gli-e.pdf
	 */
	bh1780@29 {
		compatible = "rohm,bh1780";
		reg = <0x29>;
	};
};

&i2c4 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c4_pins>;

	clock-frequency = <400000>;

	/*
	 * 3-Axis Digital Compass
	 * http://www.sparkfun.com/datasheets/Sensors/Magneto/HMC5843.pdf
	 */
	hmc5843@1e {
		compatible = "honeywell,hmc5843";
		reg = <0x1e>;
	};
};

&mcspi1 {
	pinctrl-names = "default";
	pinctrl-0 = <&mcspi1_pins>;

	eth@0 {
		compatible = "ks8851";
		spi-max-frequency = <24000000>;
		reg = <0>;
		interrupt-parent = <&gpio2>;
		interrupts = <2 IRQ_TYPE_LEVEL_LOW>; /* gpio line 34 */
		vdd-supply = <&vdd_eth>;
	};
};

&mmc1 {
	vmmc-supply = <&vmmc>;
	bus-width = <8>;
};

&mmc2 {
	vmmc-supply = <&vaux1>;
	bus-width = <8>;
	ti,non-removable;
};

&mmc3 {
	status = "disabled";
};

&mmc4 {
	status = "disabled";
};

&mmc5 {
	pinctrl-names = "default";
	pinctrl-0 = <&wl12xx_pins>;
	vmmc-supply = <&wl12xx_vmmc>;
	non-removable;
	bus-width = <4>;
	cap-power-off-card;
};

&emif1 {
	cs1-used;
	device-handle = <&elpida_ECB240ABACN>;
};

&emif2 {
	cs1-used;
	device-handle = <&elpida_ECB240ABACN>;
};

&keypad {
	keypad,num-rows = <8>;
	keypad,num-columns = <8>;
	linux,keymap = <0x00000012	/* KEY_E */
			0x00010013	/* KEY_R */
			0x00020014	/* KEY_T */
			0x00030066	/* KEY_HOME */
			0x0004003f	/* KEY_F5 */
			0x000500f0	/* KEY_UNKNOWN */
			0x00060017	/* KEY_I */
			0x0007002a	/* KEY_LEFTSHIFT */
			0x01000020	/* KEY_D*/
			0x01010021	/* KEY_F */
			0x01020022	/* KEY_G */
			0x010300e7	/* KEY_SEND */
			0x01040040	/* KEY_F6 */
			0x010500f0	/* KEY_UNKNOWN */
			0x01060025	/* KEY_K */
			0x0107001c	/* KEY_ENTER */
			0x0200002d	/* KEY_X */
			0x0201002e	/* KEY_C */
			0x0202002f	/* KEY_V */
			0x0203006b	/* KEY_END */
			0x02040041	/* KEY_F7 */
			0x020500f0	/* KEY_UNKNOWN */
			0x02060034	/* KEY_DOT */
			0x0207003a	/* KEY_CAPSLOCK */
			0x0300002c	/* KEY_Z */
			0x0301004e	/* KEY_KPLUS */
			0x03020030	/* KEY_B */
			0x0303003b	/* KEY_F1 */
			0x03040042	/* KEY_F8 */
			0x030500f0	/* KEY_UNKNOWN */
			0x03060018	/* KEY_O */
			0x03070039	/* KEY_SPACE */
			0x04000011	/* KEY_W */
			0x04010015	/* KEY_Y */
			0x04020016	/* KEY_U */
			0x0403003c	/* KEY_F2 */
			0x04040073	/* KEY_VOLUMEUP */
			0x040500f0	/* KEY_UNKNOWN */
			0x04060026	/* KEY_L */
			0x04070069	/* KEY_LEFT */
			0x0500001f	/* KEY_S */
			0x05010023	/* KEY_H */
			0x05020024	/* KEY_J */
			0x0503003d	/* KEY_F3 */
			0x05040043	/* KEY_F9 */
			0x05050072	/* KEY_VOLUMEDOWN */
			0x05060032	/* KEY_M */
			0x0507006a	/* KEY_RIGHT */
			0x06000010	/* KEY_Q */
			0x0601001e	/* KEY_A */
			0x06020031	/* KEY_N */
			0x0603009e	/* KEY_BACK */
			0x0604000e	/* KEY_BACKSPACE */
			0x060500f0	/* KEY_UNKNOWN */
			0x06060019	/* KEY_P */
			0x06070067	/* KEY_UP */
			0x07000094	/* KEY_PROG1 */
			0x07010095	/* KEY_PROG2 */
			0x070200ca	/* KEY_PROG3 */
			0x070300cb	/* KEY_PROG4 */
			0x0704003e	/* KEY_F4 */
			0x070500f0	/* KEY_UNKNOWN */
			0x07060160	/* KEY_OK */
			0x0707006c>;	/* KEY_DOWN */
	linux,input-no-autorepeat;
};

&uart2 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart2_pins>;
};

&uart3 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart3_pins>;
};

&uart4 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart4_pins>;
};

&mcbsp3 {
	status = "disabled";
};

&twl_usb_comparator {
	usb-supply = <&vusb>;
};

&usb_otg_hs {
	interface-type = <1>;
	mode = <3>;
	power = <50>;
};
Commit	Line	Data
492beedf BC	1	/*
	2	* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
	3	*
	4	* This program is free software; you can redistribute it and/or modify
	5	* it under the terms of the GNU General Public License version 2 as
	6	* published by the Free Software Foundation.
	7	*/
	8	/dts-v1/;
	9
98ef7957 FV	10	#include "omap443x.dtsi"
98ef7957 FV	11	#include "elpida_ecb240abacn.dtsi"
492beedf BC	12
	13	/ {
	14	model = "TI OMAP4 SDP board";
	15	compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4";
	16
492beedf BC	17	memory {
	18	device_type = "memory";
	19	reg = <0x80000000 0x40000000>; /* 1 GB */
	20	};
e7c64db9	21
624411ce	22	vdd_eth: fixedregulator-vdd-eth {
e7c64db9 BC	23	compatible = "regulator-fixed";
	24	regulator-name = "VDD_ETH";
	25	regulator-min-microvolt = <3300000>;
	26	regulator-max-microvolt = <3300000>;
	27	gpio = <&gpio2 16 0>; /* gpio line 48 */
	28	enable-active-high;
	29	regulator-boot-on;
	30	};
83909c73	31
624411ce	32	vbat: fixedregulator-vbat {
4814f2f7 PU	33	compatible = "regulator-fixed";
	34	regulator-name = "VBAT";
	35	regulator-min-microvolt = <3750000>;
	36	regulator-max-microvolt = <3750000>;
	37	regulator-boot-on;
	38	};
	39
83909c73 BC	40	leds {
	41	compatible = "gpio-leds";
	42	debug0 {
	43	label = "omap4:green:debug0";
6d624eab	44	gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; /* 61 */
83909c73 BC	45	};
	46
	47	debug1 {
	48	label = "omap4:green:debug1";
6d624eab	49	gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; /* 30 */
83909c73 BC	50	};
	51
	52	debug2 {
	53	label = "omap4:green:debug2";
6d624eab	54	gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; /* 7 */
83909c73 BC	55	};
	56
	57	debug3 {
	58	label = "omap4:green:debug3";
6d624eab	59	gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* 8 */
83909c73 BC	60	};
	61
	62	debug4 {
	63	label = "omap4:green:debug4";
6d624eab	64	gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; /* 50 */
83909c73 BC	65	};
	66
	67	user1 {
	68	label = "omap4:blue:user";
6d624eab	69	gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* 169 */
83909c73 BC	70	};
	71
	72	user2 {
	73	label = "omap4:red:user";
6d624eab	74	gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; /* 170 */
83909c73 BC	75	};
	76
	77	user3 {
	78	label = "omap4:green:user";
6d624eab	79	gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* 139 */
83909c73 BC	80	};
83909c73 BC	81	};
b15bb2c0	82
28f166cb PU	83	pwmleds {
	84	compatible = "pwm-leds";
	85	kpad {
	86	label = "omap4::keypad";
	87	pwms = <&twl_pwm 0 7812500>;
	88	max-brightness = <127>;
	89	};
	90
	91	charging {
	92	label = "omap4:green:chrg";
	93	pwms = <&twl_pwmled 0 7812500>;
	94	max-brightness = <255>;
	95	};
	96	};
	97
f95c01df PU	98	backlight {
	99	compatible = "pwm-backlight";
	100	pwms = <&twl_pwm 1 7812500>;
	101	brightness-levels = <
	102	0 10 20 30 40
	103	50 60 70 80 90
	104	100 110 120 127
	105	>;
	106	default-brightness-level = <13>;
	107	};
	108
b15bb2c0 PU	109	sound {
	110	compatible = "ti,abe-twl6040";
	111	ti,model = "SDP4430";
	112
	113	ti,jack-detection = <1>;
	114	ti,mclk-freq = <38400000>;
	115
	116	ti,mcpdm = <&mcpdm>;
	117	ti,dmic = <&dmic>;
	118
	119	ti,twl6040 = <&twl6040>;
	120
	121	/* Audio routing */
	122	ti,audio-routing =
	123	"Headset Stereophone", "HSOL",
	124	"Headset Stereophone", "HSOR",
	125	"Earphone Spk", "EP",
	126	"Ext Spk", "HFL",
	127	"Ext Spk", "HFR",
	128	"Line Out", "AUXL",
	129	"Line Out", "AUXR",
	130	"Vibrator", "VIBRAL",
	131	"Vibrator", "VIBRAR",
	132	"HSMIC", "Headset Mic",
	133	"Headset Mic", "Headset Mic Bias",
	134	"MAINMIC", "Main Handset Mic",
	135	"Main Handset Mic", "Main Mic Bias",
	136	"SUBMIC", "Sub Handset Mic",
	137	"Sub Handset Mic", "Main Mic Bias",
	138	"AFML", "Line In",
	139	"AFMR", "Line In",
	140	"DMic", "Digital Mic",
	141	"Digital Mic", "Digital Mic1 Bias";
	142	};
775d2418 TL	143
	144	/* regulator for wl12xx on sdio5 */
	145	wl12xx_vmmc: wl12xx_vmmc {
	146	pinctrl-names = "default";
	147	pinctrl-0 = <&wl12xx_gpio>;
	148	compatible = "regulator-fixed";
	149	regulator-name = "vwl1271";
	150	regulator-min-microvolt = <1800000>;
	151	regulator-max-microvolt = <1800000>;
	152	gpio = <&gpio2 22 0>;
	153	startup-delay-us = <70000>;
	154	enable-active-high;
	155	};
492beedf	156	};
33632ae7	157
1e68f43b KH	158	&omap4_pmx_wkup {
	159	pinctrl-names = "default";
	160	pinctrl-0 = <
	161	&twl6030_wkup_pins
	162	>;
	163
	164	twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
	165	pinctrl-single,pins = <
bcd3cca7	166	0x14 (PIN_OUTPUT \| MUX_MODE2) /* fref_clk0_out.sys_drm_msecure */
1e68f43b KH	167	>;
	168	};
	169	};
	170
26638c66	171	&omap4_pmx_core {
08386feb PU	172	pinctrl-names = "default";
08386feb PU	173	pinctrl-0 = <
1e68f43b	174	&twl6030_pins
08386feb PU	175	&twl6040_pins
	176	&mcpdm_pins
	177	&dmic_pins
	178	&mcbsp1_pins
	179	&mcbsp2_pins
347bf48f RN	180	&dss_hdmi_pins
347bf48f RN	181	&tpd12s015_pins
08386feb PU	182	>;
08386feb PU	183
26638c66 TL	184	uart2_pins: pinmux_uart2_pins {
26638c66 TL	185	pinctrl-single,pins = <
bcd3cca7 FV	186	0xd8 (PIN_INPUT_PULLUP \| MUX_MODE0) /* uart2_cts.uart2_cts */
	187	0xda (PIN_OUTPUT \| MUX_MODE0) /* uart2_rts.uart2_rts */
	188	0xdc (PIN_INPUT_PULLUP \| MUX_MODE0) /* uart2_rx.uart2_rx */
	189	0xde (PIN_OUTPUT \| MUX_MODE0) /* uart2_tx.uart2_tx */
26638c66 TL	190	>;
	191	};
	192
	193	uart3_pins: pinmux_uart3_pins {
	194	pinctrl-single,pins = <
bcd3cca7 FV	195	0x100 (PIN_INPUT_PULLUP \| MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */
	196	0x102 (PIN_OUTPUT \| MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */
	197	0x104 (PIN_INPUT \| MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
	198	0x106 (PIN_OUTPUT \| MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
26638c66 TL	199	>;
	200	};
	201
	202	uart4_pins: pinmux_uart4_pins {
	203	pinctrl-single,pins = <
bcd3cca7 FV	204	0x11c (PIN_INPUT \| MUX_MODE0) /* uart4_rx.uart4_rx */
bcd3cca7 FV	205	0x11e (PIN_OUTPUT \| MUX_MODE0) /* uart4_tx.uart4_tx */
26638c66 TL	206	>;
26638c66 TL	207	};
08386feb	208
1e68f43b KH	209	twl6030_pins: pinmux_twl6030_pins {
1e68f43b KH	210	pinctrl-single,pins = <
bcd3cca7	211	0x15e (WAKEUP_EN \| PIN_INPUT_PULLUP \| MUX_MODE0) /* sys_nirq1.sys_nirq1 */
1e68f43b KH	212	>;
	213	};
	214
08386feb PU	215	twl6040_pins: pinmux_twl6040_pins {
08386feb PU	216	pinctrl-single,pins = <
bcd3cca7 FV	217	0xe0 (PIN_OUTPUT \| MUX_MODE3) /* hdq_sio.gpio_127 */
bcd3cca7 FV	218	0x160 (PIN_INPUT \| MUX_MODE0) /* sys_nirq2.sys_nirq2 */
08386feb PU	219	>;
	220	};
	221
	222	mcpdm_pins: pinmux_mcpdm_pins {
	223	pinctrl-single,pins = <
bcd3cca7 FV	224	0xc6 (PIN_INPUT_PULLDOWN \| MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */
	225	0xc8 (PIN_INPUT_PULLDOWN \| MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */
	226	0xca (PIN_INPUT_PULLUP \| MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */
	227	0xcc (PIN_INPUT_PULLDOWN \| MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */
	228	0xce (PIN_INPUT_PULLDOWN \| MUX_MODE0) /* abe_clks.abe_clks */
08386feb PU	229	>;
	230	};
	231
	232	dmic_pins: pinmux_dmic_pins {
	233	pinctrl-single,pins = <
bcd3cca7 FV	234	0xd0 (PIN_OUTPUT \| MUX_MODE0) /* abe_dmic_clk1.abe_dmic_clk1 */
	235	0xd2 (PIN_INPUT \| MUX_MODE0) /* abe_dmic_din1.abe_dmic_din1 */
	236	0xd4 (PIN_INPUT \| MUX_MODE0) /* abe_dmic_din2.abe_dmic_din2 */
	237	0xd6 (PIN_INPUT \| MUX_MODE0) /* abe_dmic_din3.abe_dmic_din3 */
08386feb PU	238	>;
	239	};
	240
	241	mcbsp1_pins: pinmux_mcbsp1_pins {
	242	pinctrl-single,pins = <
bcd3cca7 FV	243	0xbe (PIN_INPUT \| MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
	244	0xc0 (PIN_INPUT_PULLDOWN \| MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */
	245	0xc2 (PIN_OUTPUT_PULLDOWN \| MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */
	246	0xc4 (PIN_INPUT \| MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
08386feb PU	247	>;
	248	};
	249
	250	mcbsp2_pins: pinmux_mcbsp2_pins {
	251	pinctrl-single,pins = <
bcd3cca7 FV	252	0xb6 (PIN_INPUT \| MUX_MODE0) /* abe_mcbsp2_clkx.abe_mcbsp2_clkx */
	253	0xb8 (PIN_INPUT_PULLDOWN \| MUX_MODE0) /* abe_mcbsp2_dr.abe_mcbsp2_dr */
	254	0xba (PIN_OUTPUT_PULLDOWN \| MUX_MODE0) /* abe_mcbsp2_dx.abe_mcbsp2_dx */
	255	0xbc (PIN_INPUT \| MUX_MODE0) /* abe_mcbsp2_fsx.abe_mcbsp2_fsx */
08386feb PU	256	>;
08386feb PU	257	};
347bf48f	258
d5a2b34f TL	259	mcspi1_pins: pinmux_mcspi1_pins {
d5a2b34f TL	260	pinctrl-single,pins = <
bcd3cca7 FV	261	0xf2 (PIN_INPUT \| MUX_MODE0) /* mcspi1_clk.mcspi1_clk */
	262	0xf4 (PIN_INPUT \| MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
	263	0xf6 (PIN_INPUT \| MUX_MODE0) /* mcspi1_simo.mcspi1_simo */
	264	0xf8 (PIN_INPUT \| MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */
d5a2b34f TL	265	>;
	266	};
	267
347bf48f RN	268	dss_hdmi_pins: pinmux_dss_hdmi_pins {
347bf48f RN	269	pinctrl-single,pins = <
bcd3cca7 FV	270	0x5a (PIN_INPUT_PULLUP \| MUX_MODE0) /* hdmi_cec.hdmi_cec */
	271	0x5c (PIN_INPUT_PULLUP \| MUX_MODE0) /* hdmi_scl.hdmi_scl */
	272	0x5e (PIN_INPUT_PULLUP \| MUX_MODE0) /* hdmi_sda.hdmi_sda */
347bf48f RN	273	>;
	274	};
	275
	276	tpd12s015_pins: pinmux_tpd12s015_pins {
	277	pinctrl-single,pins = <
bcd3cca7 FV	278	0x22 (PIN_OUTPUT \| MUX_MODE3) /* gpmc_a17.gpio_41 */
	279	0x48 (PIN_OUTPUT \| MUX_MODE3) /* gpmc_nbe1.gpio_60 */
	280	0x58 (PIN_INPUT_PULLDOWN \| MUX_MODE3) /* hdmi_hpd.gpio_63 */
347bf48f RN	281	>;
347bf48f RN	282	};
be26cd6d SP	283
	284	i2c1_pins: pinmux_i2c1_pins {
	285	pinctrl-single,pins = <
bcd3cca7 FV	286	0xe2 (PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c1_scl */
bcd3cca7 FV	287	0xe4 (PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c1_sda */
be26cd6d SP	288	>;
	289	};
	290
	291	i2c2_pins: pinmux_i2c2_pins {
	292	pinctrl-single,pins = <
bcd3cca7 FV	293	0xe6 (PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c2_scl */
bcd3cca7 FV	294	0xe8 (PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c2_sda */
be26cd6d SP	295	>;
	296	};
	297
	298	i2c3_pins: pinmux_i2c3_pins {
	299	pinctrl-single,pins = <
bcd3cca7 FV	300	0xea (PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c3_scl */
bcd3cca7 FV	301	0xec (PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c3_sda */
be26cd6d SP	302	>;
	303	};
	304
	305	i2c4_pins: pinmux_i2c4_pins {
	306	pinctrl-single,pins = <
bcd3cca7 FV	307	0xee (PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c4_scl */
bcd3cca7 FV	308	0xf0 (PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c4_sda */
be26cd6d SP	309	>;
be26cd6d SP	310	};
775d2418 TL	311
	312	/* wl12xx GPIO output for WLAN_EN */
	313	wl12xx_gpio: pinmux_wl12xx_gpio {
	314	pinctrl-single,pins = <
	315	0x3c (PIN_OUTPUT \| MUX_MODE3) /* gpmc_nwp.gpio_54 */
	316	>;
	317	};
	318
	319	/* wl12xx GPIO inputs and SDIO pins */
	320	wl12xx_pins: pinmux_wl12xx_pins {
	321	pinctrl-single,pins = <
	322	0x3a (PIN_INPUT \| MUX_MODE3) /* gpmc_ncs3.gpio_53 */
	323	0x108 (PIN_OUTPUT \| MUX_MODE3) /* sdmmc5_clk.sdmmc5_clk */
	324	0x10a (PIN_INPUT_PULLUP \| MUX_MODE3) /* sdmmc5_cmd.sdmmc5_cmd */
	325	0x10c (PIN_INPUT_PULLUP \| MUX_MODE3) /* sdmmc5_dat0.sdmmc5_dat0 */
	326	0x10e (PIN_INPUT_PULLUP \| MUX_MODE3) /* sdmmc5_dat1.sdmmc5_dat1 */
	327	0x110 (PIN_INPUT_PULLUP \| MUX_MODE3) /* sdmmc5_dat2.sdmmc5_dat2 */
	328	0x112 (PIN_INPUT_PULLUP \| MUX_MODE3) /* sdmmc5_dat3.sdmmc5_dat3 */
	329	>;
	330	};
26638c66 TL	331	};
26638c66 TL	332
33632ae7	333	&i2c1 {
be26cd6d SP	334	pinctrl-names = "default";
	335	pinctrl-0 = <&i2c1_pins>;
	336
33632ae7 BC	337	clock-frequency = <400000>;
	338
	339	twl: twl@48 {
	340	reg = <0x48>;
	341	/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
8fea7d5a	342	interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
33632ae7 BC	343	interrupt-parent = <&gic>;
33632ae7 BC	344	};
efd2af55 PU	345
	346	twl6040: twl@4b {
	347	compatible = "ti,twl6040";
	348	reg = <0x4b>;
	349	/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
8fea7d5a	350	interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
efd2af55 PU	351	interrupt-parent = <&gic>;
	352	ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */
	353
	354	vio-supply = <&v1v8>;
	355	v2v1-supply = <&v2v1>;
	356	enable-active-high;
	357
	358	/* regulators for vibra motor */
	359	vddvibl-supply = <&vbat>;
	360	vddvibr-supply = <&vbat>;
	361
	362	vibra {
	363	/* Vibra driver, motor resistance parameters */
	364	ti,vibldrv-res = <8>;
	365	ti,vibrdrv-res = <3>;
	366	ti,viblmotor-res = <10>;
	367	ti,vibrmotor-res = <10>;
	368	};
	369	};
33632ae7 BC	370	};
33632ae7 BC	371
98ef7957	372	#include "twl6030.dtsi"
33632ae7 BC	373
33632ae7 BC	374	&i2c2 {
be26cd6d SP	375	pinctrl-names = "default";
	376	pinctrl-0 = <&i2c2_pins>;
	377
33632ae7 BC	378	clock-frequency = <400000>;
	379	};
	380
	381	&i2c3 {
be26cd6d SP	382	pinctrl-names = "default";
	383	pinctrl-0 = <&i2c3_pins>;
	384
33632ae7 BC	385	clock-frequency = <400000>;
	386
	387	/*
	388	* Temperature Sensor
	389	* http://www.ti.com/lit/ds/symlink/tmp105.pdf
	390	*/
	391	tmp105@48 {
	392	compatible = "ti,tmp105";
	393	reg = <0x48>;
	394	};
	395
	396	/*
	397	* Ambient Light Sensor
	398	* http://www.rohm.com/products/databook/sensor/pdf/bh1780gli-e.pdf
	399	*/
	400	bh1780@29 {
	401	compatible = "rohm,bh1780";
	402	reg = <0x29>;
	403	};
	404	};
	405
	406	&i2c4 {
be26cd6d SP	407	pinctrl-names = "default";
	408	pinctrl-0 = <&i2c4_pins>;
	409
33632ae7 BC	410	clock-frequency = <400000>;
	411
	412	/*
	413	* 3-Axis Digital Compass
	414	* http://www.sparkfun.com/datasheets/Sensors/Magneto/HMC5843.pdf
	415	*/
	416	hmc5843@1e {
	417	compatible = "honeywell,hmc5843";
	418	reg = <0x1e>;
	419	};
	420	};
e7c64db9 BC	421
e7c64db9 BC	422	&mcspi1 {
d5a2b34f TL	423	pinctrl-names = "default";
	424	pinctrl-0 = <&mcspi1_pins>;
	425
e7c64db9 BC	426	eth@0 {
	427	compatible = "ks8851";
	428	spi-max-frequency = <24000000>;
	429	reg = <0>;
	430	interrupt-parent = <&gpio2>;
8fea7d5a	431	interrupts = <2 IRQ_TYPE_LEVEL_LOW>; /* gpio line 34 */
e7c64db9 BC	432	vdd-supply = <&vdd_eth>;
	433	};
	434	};
74981768 RN	435
	436	&mmc1 {
	437	vmmc-supply = <&vmmc>;
7f217794	438	bus-width = <8>;
74981768 RN	439	};
	440
	441	&mmc2 {
	442	vmmc-supply = <&vaux1>;
7f217794	443	bus-width = <8>;
74981768 RN	444	ti,non-removable;
	445	};
	446
	447	&mmc3 {
fd5c3fd7	448	status = "disabled";
74981768 RN	449	};
	450
	451	&mmc4 {
fd5c3fd7	452	status = "disabled";
74981768 RN	453	};
	454
	455	&mmc5 {
775d2418 TL	456	pinctrl-names = "default";
	457	pinctrl-0 = <&wl12xx_pins>;
	458	vmmc-supply = <&wl12xx_vmmc>;
	459	non-removable;
7f217794	460	bus-width = <4>;
775d2418	461	cap-power-off-card;
74981768	462	};
61bc3544	463
11c27069 A	464	&emif1 {
	465	cs1-used;
	466	device-handle = <&elpida_ECB240ABACN>;
	467	};
	468
	469	&emif2 {
	470	cs1-used;
	471	device-handle = <&elpida_ECB240ABACN>;
	472	};
	473
61bc3544 SP	474	&keypad {
	475	keypad,num-rows = <8>;
	476	keypad,num-columns = <8>;
	477	linux,keymap = <0x00000012 /* KEY_E */
	478	0x00010013 /* KEY_R */
	479	0x00020014 /* KEY_T */
	480	0x00030066 /* KEY_HOME */
	481	0x0004003f /* KEY_F5 */
	482	0x000500f0 /* KEY_UNKNOWN */
	483	0x00060017 /* KEY_I */
	484	0x0007002a /* KEY_LEFTSHIFT */
	485	0x01000020 /* KEY_D*/
	486	0x01010021 /* KEY_F */
	487	0x01020022 /* KEY_G */
	488	0x010300e7 /* KEY_SEND */
	489	0x01040040 /* KEY_F6 */
	490	0x010500f0 /* KEY_UNKNOWN */
	491	0x01060025 /* KEY_K */
	492	0x0107001c /* KEY_ENTER */
	493	0x0200002d /* KEY_X */
	494	0x0201002e /* KEY_C */
	495	0x0202002f /* KEY_V */
	496	0x0203006b /* KEY_END */
	497	0x02040041 /* KEY_F7 */
	498	0x020500f0 /* KEY_UNKNOWN */
	499	0x02060034 /* KEY_DOT */
	500	0x0207003a /* KEY_CAPSLOCK */
	501	0x0300002c /* KEY_Z */
	502	0x0301004e /* KEY_KPLUS */
	503	0x03020030 /* KEY_B */
	504	0x0303003b /* KEY_F1 */
	505	0x03040042 /* KEY_F8 */
	506	0x030500f0 /* KEY_UNKNOWN */
	507	0x03060018 /* KEY_O */
	508	0x03070039 /* KEY_SPACE */
	509	0x04000011 /* KEY_W */
	510	0x04010015 /* KEY_Y */
	511	0x04020016 /* KEY_U */
	512	0x0403003c /* KEY_F2 */
	513	0x04040073 /* KEY_VOLUMEUP */
	514	0x040500f0 /* KEY_UNKNOWN */
	515	0x04060026 /* KEY_L */
	516	0x04070069 /* KEY_LEFT */
	517	0x0500001f /* KEY_S */
	518	0x05010023 /* KEY_H */
	519	0x05020024 /* KEY_J */
	520	0x0503003d /* KEY_F3 */
	521	0x05040043 /* KEY_F9 */
	522	0x05050072 /* KEY_VOLUMEDOWN */
	523	0x05060032 /* KEY_M */
	524	0x0507006a /* KEY_RIGHT */
	525	0x06000010 /* KEY_Q */
	526	0x0601001e /* KEY_A */
	527	0x06020031 /* KEY_N */
	528	0x0603009e /* KEY_BACK */
	529	0x0604000e /* KEY_BACKSPACE */
	530	0x060500f0 /* KEY_UNKNOWN */
	531	0x06060019 /* KEY_P */
	532	0x06070067 /* KEY_UP */
	533	0x07000094 /* KEY_PROG1 */
	534	0x07010095 /* KEY_PROG2 */
	535	0x070200ca /* KEY_PROG3 */
	536	0x070300cb /* KEY_PROG4 */
	537	0x0704003e /* KEY_F4 */
538	0x070500f0 /* KEY_UNKNOWN */
539	0x07060160 /* KEY_OK */
540	0x0707006c>; /* KEY_DOWN */
541	linux,input-no-autorepeat;
542	};
26638c66 TL	543
	544	&uart2 {
	545	pinctrl-names = "default";
	546	pinctrl-0 = <&uart2_pins>;
	547	};
	548
	549	&uart3 {
	550	pinctrl-names = "default";
	551	pinctrl-0 = <&uart3_pins>;
	552	};
	553
	554	&uart4 {
	555	pinctrl-names = "default";
	556	pinctrl-0 = <&uart4_pins>;
	557	};
6e659281 PU	558
	559	&mcbsp3 {
	560	status = "disabled";
	561	};
6ff862f6 KVA	562
	563	&twl_usb_comparator {
	564	usb-supply = <&vusb>;
	565	};
ad871c10 KVA	566
	567	&usb_otg_hs {
	568	interface-type = <1>;
	569	mode = <3>;
	570	power = <50>;
	571	};