projects / deliverable / linux.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
Linux 3.11-rc1
[deliverable/linux.git] / arch / arm / boot / dts / omap5-uevm.dts
CommitLineData
6b5de091 1/*
fa63d037 2 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
6b5de091
S		 3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 */
8/dts-v1/;
9
98ef7957 10#include "omap5.dtsi"
e00c27ef
K		 11#include <dt-bindings/interrupt-controller/irq.h>
12#include <dt-bindings/interrupt-controller/arm-gic.h>
6b5de091
S		 13
14/ {
fa63d037
S		 15 model = "TI OMAP5 uEVM board";
16 compatible = "ti,omap5-uevm", "ti,omap5";
6b5de091
S		 17
18 memory {
19 device_type = "memory";
03178c66 20 reg = <0x80000000 0x7F000000>; /* 2032 MB */
6b5de091 21 };
5dd18b01
B		 22
23 vmmcsd_fixed: fixedregulator-mmcsd {
24 compatible = "regulator-fixed";
25 regulator-name = "vmmcsd_fixed";
26 regulator-min-microvolt = <3000000>;
27 regulator-max-microvolt = <3000000>;
28 };
5449fbc2 29
ed7f8e8a
RQ		 30 /* HS USB Port 2 RESET */
31 hsusb2_reset: hsusb2_reset_reg {
32 compatible = "regulator-fixed";
33 regulator-name = "hsusb2_reset";
34 regulator-min-microvolt = <3300000>;
35 regulator-max-microvolt = <3300000>;
36 gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>; /* gpio3_80 HUB_NRESET */
37 startup-delay-us = <70000>;
38 enable-active-high;
39 };
40
41 /* HS USB Host PHY on PORT 2 */
42 hsusb2_phy: hsusb2_phy {
43 compatible = "usb-nop-xceiv";
44 reset-supply = <&hsusb2_reset>;
153030c2
RQ		 45 /**
46 * FIXME
47 * Put the right clock phandle here when available
48 * clocks = <&auxclk1>;
49 * clock-names = "main_clk";
50 */
51 clock-frequency = <19200000>;
ed7f8e8a
RQ		 52 };
53
54 /* HS USB Port 3 RESET */
55 hsusb3_reset: hsusb3_reset_reg {
56 compatible = "regulator-fixed";
57 regulator-name = "hsusb3_reset";
58 regulator-min-microvolt = <3300000>;
59 regulator-max-microvolt = <3300000>;
60 gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>; /* gpio3_79 ETH_NRESET */
61 startup-delay-us = <70000>;
62 enable-active-high;
63 };
64
65 /* HS USB Host PHY on PORT 3 */
66 hsusb3_phy: hsusb3_phy {
67 compatible = "usb-nop-xceiv";
68 reset-supply = <&hsusb3_reset>;
69 };
70
66155302
DM		 71 leds {
72 compatible = "gpio-leds";
73 led@1 {
74 label = "omap5:blue:usr1";
75 gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */
76 linux,default-trigger = "heartbeat";
77 default-state = "off";
78 };
79 };
5dd18b01
B		 80};
81
8bbacc55
PU		 82&omap5_pmx_core {
83 pinctrl-names = "default";
84 pinctrl-0 = <
85 &twl6040_pins
86 &mcpdm_pins
87 &dmic_pins
88 &mcbsp1_pins
89 &mcbsp2_pins
ed7f8e8a 90 &usbhost_pins
66155302 91 &led_gpio_pins
8bbacc55
PU		 92 >;
93
94 twl6040_pins: pinmux_twl6040_pins {
95 pinctrl-single,pins = <
bcd3cca7 96 0x18a (PIN_OUTPUT | MUX_MODE6) /* perslimbus2_clock.gpio5_145 */
8bbacc55
PU		 97 >;
98 };
99
100 mcpdm_pins: pinmux_mcpdm_pins {
101 pinctrl-single,pins = <
bcd3cca7
FV		 102 0x142 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */
103 0x15c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_ul_data.abemcpdm_ul_data */
104 0x15e (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_dl_data.abemcpdm_dl_data */
105 0x160 (PIN_INPUT_PULLUP | MUX_MODE0) /* abemcpdm_frame.abemcpdm_frame */
106 0x162 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_lb_clk.abemcpdm_lb_clk */
8bbacc55
PU		 107 >;
108 };
109
110 dmic_pins: pinmux_dmic_pins {
111 pinctrl-single,pins = <
bcd3cca7
FV		 112 0x144 (PIN_INPUT | MUX_MODE0) /* abedmic_din1.abedmic_din1 */
113 0x146 (PIN_INPUT | MUX_MODE0) /* abedmic_din2.abedmic_din2 */
114 0x148 (PIN_INPUT | MUX_MODE0) /* abedmic_din3.abedmic_din3 */
115 0x14a (PIN_OUTPUT | MUX_MODE0) /* abedmic_clk1.abedmic_clk1 */
8bbacc55
PU		 116 >;
117 };
118
119 mcbsp1_pins: pinmux_mcbsp1_pins {
120 pinctrl-single,pins = <
bcd3cca7
FV		 121 0x14c (PIN_INPUT | MUX_MODE1) /* abedmic_clk2.abemcbsp1_fsx */
122 0x14e (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* abedmic_clk3.abemcbsp1_dx */
123 0x150 (PIN_INPUT | MUX_MODE1) /* abeslimbus1_clock.abemcbsp1_clkx */
124 0x152 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* abeslimbus1_data.abemcbsp1_dr */
8bbacc55
PU		 125 >;
126 };
127
128 mcbsp2_pins: pinmux_mcbsp2_pins {
129 pinctrl-single,pins = <
bcd3cca7
FV		 130 0x154 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dr.abemcbsp2_dr */
131 0x156 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dx.abemcbsp2_dx */
132 0x158 (PIN_INPUT | MUX_MODE0) /* abemcbsp2_fsx.abemcbsp2_fsx */
133 0x15a (PIN_INPUT | MUX_MODE0) /* abemcbsp2_clkx.abemcbsp2_clkx */
8bbacc55
PU		 134 >;
135 };
9be495c4 136
bcd3cca7
FV		 137 i2c1_pins: pinmux_i2c1_pins {
138 pinctrl-single,pins = <
139 0x1b2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
140 0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
141 >;
142 };
9be495c4 143
9be495c4
SP		 144 i2c5_pins: pinmux_i2c5_pins {
145 pinctrl-single,pins = <
bcd3cca7
FV		 146 0x184 (PIN_INPUT | MUX_MODE0) /* i2c5_scl */
147 0x186 (PIN_INPUT | MUX_MODE0) /* i2c5_sda */
9be495c4
SP		 148 >;
149 };
392adaf7
SP		 150
151 mcspi2_pins: pinmux_mcspi2_pins {
152 pinctrl-single,pins = <
bcd3cca7
FV		 153 0xbc (PIN_INPUT | MUX_MODE0) /* mcspi2_clk */
154 0xbe (PIN_INPUT | MUX_MODE0) /* mcspi2_simo */
155 0xc0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi2_somi */
156 0xc2 (PIN_OUTPUT | MUX_MODE0) /* mcspi2_cs */
392adaf7
SP		 157 >;
158 };
159
160 mcspi3_pins: pinmux_mcspi3_pins {
161 pinctrl-single,pins = <
bcd3cca7
FV		 162 0x78 (PIN_INPUT | MUX_MODE1) /* mcspi2_somi */
163 0x7a (PIN_INPUT | MUX_MODE1) /* mcspi2_cs */
164 0x7c (PIN_INPUT | MUX_MODE1) /* mcspi2_simo */
165 0x7e (PIN_INPUT | MUX_MODE1) /* mcspi2_clk */
392adaf7
SP		 166 >;
167 };
168
169 mcspi4_pins: pinmux_mcspi4_pins {
170 pinctrl-single,pins = <
bcd3cca7
FV		 171 0x164 (PIN_INPUT | MUX_MODE1) /* mcspi2_clk */
172 0x168 (PIN_INPUT | MUX_MODE1) /* mcspi2_simo */
173 0x16a (PIN_INPUT | MUX_MODE1) /* mcspi2_somi */
174 0x16c (PIN_INPUT | MUX_MODE1) /* mcspi2_cs */
392adaf7
SP		 175 >;
176 };
ed7f8e8a
RQ		 177
178 usbhost_pins: pinmux_usbhost_pins {
179 pinctrl-single,pins = <
180 0x84 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */
181 0x86 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */
182
183 0x19e (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */
184 0x1a0 (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */
185
186 0x70 (PIN_OUTPUT | MUX_MODE6) /* gpio3_80 HUB_NRESET */
187 0x6e (PIN_OUTPUT | MUX_MODE6) /* gpio3_79 ETH_NRESET */
188 >;
189 };
66155302
DM		 190
191 led_gpio_pins: pinmux_led_gpio_pins {
192 pinctrl-single,pins = <
193 0x196 (PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */
194 >;
195 };
ed22fee3
SP		 196
197 uart1_pins: pinmux_uart1_pins {
198 pinctrl-single,pins = <
199 0x60 (PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */
200 0x62 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */
201 0x64 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rx.uart1_rts */
202 0x66 (PIN_OUTPUT | MUX_MODE0) /* uart1_rx.uart1_rts */
203 >;
204 };
205
206 uart3_pins: pinmux_uart3_pins {
207 pinctrl-single,pins = <
208 0x19a (PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */
209 0x19c (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */
210 >;
211 };
212
213 uart5_pins: pinmux_uart5_pins {
214 pinctrl-single,pins = <
215 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */
216 0x172 (PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */
217 0x174 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_cts.uart5_rts */
218 0x176 (PIN_OUTPUT | MUX_MODE0) /* uart5_cts.uart5_rts */
219 >;
220 };
221
ed7f8e8a
RQ		 222};
223
224&omap5_pmx_wkup {
225 pinctrl-names = "default";
226 pinctrl-0 = <
227 &usbhost_wkup_pins
228 >;
229
230 usbhost_wkup_pins: pinmux_usbhost_wkup_pins {
231 pinctrl-single,pins = <
232 0x1A (PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */
233 >;
234 };
8bbacc55
PU		 235};
236
5dd18b01
B		 237&mmc1 {
238 vmmc-supply = <&vmmcsd_fixed>;
239 bus-width = <4>;
240};
241
242&mmc2 {
243 vmmc-supply = <&vmmcsd_fixed>;
244 bus-width = <8>;
245 ti,non-removable;
246};
247
248&mmc3 {
249 bus-width = <4>;
250 ti,non-removable;
251};
252
253&mmc4 {
254 status = "disabled";
255};
256
257&mmc5 {
258 status = "disabled";
6b5de091 259};
08f3e21b 260
9be495c4
SP		 261&i2c1 {
262 pinctrl-names = "default";
263 pinctrl-0 = <&i2c1_pins>;
264
265 clock-frequency = <400000>;
e00c27ef
K		 266
267 palmas: palmas@48 {
268 compatible = "ti,palmas";
269 interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
270 interrupt-parent = <&gic>;
271 reg = <0x48>;
272 interrupt-controller;
273 #interrupt-cells = <2>;
274
275 palmas_pmic {
276 compatible = "ti,palmas-pmic";
277 interrupt-parent = <&palmas>;
278 interrupts = <14 IRQ_TYPE_NONE>;
279 interrupt-name = "short-irq";
280
281 ti,ldo6-vibrator;
282
283 regulators {
284 smps123_reg: smps123 {
285 regulator-name = "smps123";
286 regulator-min-microvolt = < 600000>;
287 regulator-max-microvolt = <1500000>;
288 regulator-always-on;
289 regulator-boot-on;
290 };
291
292 smps45_reg: smps45 {
293 regulator-name = "smps45";
294 regulator-min-microvolt = < 600000>;
295 regulator-max-microvolt = <1310000>;
296 regulator-always-on;
297 regulator-boot-on;
298 };
299
300 smps6_reg: smps6 {
301 regulator-name = "smps6";
302 regulator-min-microvolt = <1200000>;
303 regulator-max-microvolt = <1200000>;
304 regulator-always-on;
305 regulator-boot-on;
306 };
307
308 smps7_reg: smps7 {
309 regulator-name = "smps7";
310 regulator-min-microvolt = <1800000>;
311 regulator-max-microvolt = <1800000>;
312 regulator-always-on;
313 regulator-boot-on;
314 };
315
316 smps8_reg: smps8 {
317 regulator-name = "smps8";
318 regulator-min-microvolt = < 600000>;
319 regulator-max-microvolt = <1310000>;
320 regulator-always-on;
321 regulator-boot-on;
322 };
323
324 smps9_reg: smps9 {
325 regulator-name = "smps9";
326 regulator-min-microvolt = <2100000>;
327 regulator-max-microvolt = <2100000>;
328 regulator-always-on;
329 regulator-boot-on;
330 ti,smps-range = <0x80>;
331 };
332
333 smps10_reg: smps10 {
334 regulator-name = "smps10";
335 regulator-min-microvolt = <5000000>;
336 regulator-max-microvolt = <5000000>;
337 regulator-always-on;
338 regulator-boot-on;
339 };
340
341 ldo1_reg: ldo1 {
342 regulator-name = "ldo1";
343 regulator-min-microvolt = <2800000>;
344 regulator-max-microvolt = <2800000>;
345 regulator-always-on;
346 regulator-boot-on;
347 };
348
349 ldo2_reg: ldo2 {
350 regulator-name = "ldo2";
351 regulator-min-microvolt = <2900000>;
352 regulator-max-microvolt = <2900000>;
353 regulator-always-on;
354 regulator-boot-on;
355 };
356
357 ldo3_reg: ldo3 {
358 regulator-name = "ldo3";
359 regulator-min-microvolt = <3000000>;
360 regulator-max-microvolt = <3000000>;
361 regulator-always-on;
362 regulator-boot-on;
363 };
364
365 ldo4_reg: ldo4 {
366 regulator-name = "ldo4";
367 regulator-min-microvolt = <2200000>;
368 regulator-max-microvolt = <2200000>;
369 regulator-always-on;
370 regulator-boot-on;
371 };
372
373 ldo5_reg: ldo5 {
374 regulator-name = "ldo5";
375 regulator-min-microvolt = <1800000>;
376 regulator-max-microvolt = <1800000>;
377 regulator-always-on;
378 regulator-boot-on;
379 };
380
381 ldo6_reg: ldo6 {
382 regulator-name = "ldo6";
383 regulator-min-microvolt = <1500000>;
384 regulator-max-microvolt = <1500000>;
385 regulator-always-on;
386 regulator-boot-on;
387 };
388
389 ldo7_reg: ldo7 {
390 regulator-name = "ldo7";
391 regulator-min-microvolt = <1500000>;
392 regulator-max-microvolt = <1500000>;
393 regulator-always-on;
394 regulator-boot-on;
395 };
396
397 ldo8_reg: ldo8 {
398 regulator-name = "ldo8";
399 regulator-min-microvolt = <1500000>;
400 regulator-max-microvolt = <1500000>;
401 regulator-always-on;
402 regulator-boot-on;
403 };
404
405 ldo9_reg: ldo9 {
406 regulator-name = "ldo9";
407 regulator-min-microvolt = <1800000>;
408 regulator-max-microvolt = <3300000>;
409 regulator-always-on;
410 regulator-boot-on;
411 };
412
413 ldoln_reg: ldoln {
414 regulator-name = "ldoln";
415 regulator-min-microvolt = <1800000>;
416 regulator-max-microvolt = <1800000>;
417 regulator-always-on;
418 regulator-boot-on;
419 };
420
421 ldousb_reg: ldousb {
422 regulator-name = "ldousb";
423 regulator-min-microvolt = <3250000>;
424 regulator-max-microvolt = <3250000>;
425 regulator-always-on;
426 regulator-boot-on;
427 };
428 };
429 };
430 };
9be495c4
SP		 431};
432
9be495c4
SP		 433&i2c5 {
434 pinctrl-names = "default";
435 pinctrl-0 = <&i2c5_pins>;
436
437 clock-frequency = <400000>;
438};
439
42601d58
PU		 440&mcbsp3 {
441 status = "disabled";
442};
4d2750f3 443
ed7f8e8a
RQ		 444&usbhshost {
445 port2-mode = "ehci-hsic";
446 port3-mode = "ehci-hsic";
447};
448
449&usbhsehci {
450 phys = <0 &hsusb2_phy &hsusb3_phy>;
451};
452
392adaf7
SP		 453&mcspi1 {
454
455};
456
457&mcspi2 {
458 pinctrl-names = "default";
459 pinctrl-0 = <&mcspi2_pins>;
460};
461
462&mcspi3 {
463 pinctrl-names = "default";
464 pinctrl-0 = <&mcspi3_pins>;
465};
466
467&mcspi4 {
468 pinctrl-names = "default";
469 pinctrl-0 = <&mcspi4_pins>;
470};
ed22fee3
SP		 471
472&uart1 {
473 pinctrl-names = "default";
474 pinctrl-0 = <&uart1_pins>;
475};
476
477&uart3 {
478 pinctrl-names = "default";
479 pinctrl-0 = <&uart3_pins>;
480};
481
482&uart5 {
483 pinctrl-names = "default";
484 pinctrl-0 = <&uart5_pins>;
485};
Linux kernel - Deliverables
This page took 0.25421 seconds and 5 git commands to generate.