[deliverable/linux.git] / arch / arm / boot / dts / qcom-apq8064-ifc6410.dts

#include "qcom-apq8064-v2.0.dtsi"
#include <dt-bindings/gpio/gpio.h>

/ {
	model = "Qualcomm APQ8064/IFC6410";
	compatible = "qcom,apq8064-ifc6410", "qcom,apq8064";

	aliases {
		serial0 = &gsbi7_serial;
		serial1 = &gsbi6_serial;
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};

	soc {
		pinctrl@800000 {
			card_detect: card_detect {
				mux {
					pins = "gpio26";
					function = "gpio";
					bias-disable;
				};
			};
		};

		rpm@108000 {
			regulators {
				vin_lvs1_3_6-supply = <&pm8921_s4>;
				vin_lvs2-supply = <&pm8921_s1>;
				vin_lvs4_5_7-supply = <&pm8921_s4>;

				vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
				vdd_l24-supply = <&pm8921_s1>;
				vdd_l25-supply = <&pm8921_s1>;
				vdd_l26-supply = <&pm8921_s7>;
				vdd_l27-supply = <&pm8921_s7>;
				vdd_l28-supply = <&pm8921_s7>;


				/* Buck SMPS */
				pm8921_s1: s1 {
					regulator-always-on;
					regulator-min-microvolt = <1225000>;
					regulator-max-microvolt = <1225000>;
					qcom,switch-mode-frequency = <3200000>;
					bias-pull-down;
				};

				pm8921_s3: s3 {
					regulator-min-microvolt = <1000000>;
					regulator-max-microvolt = <1400000>;
					qcom,switch-mode-frequency = <4800000>;
				};

				pm8921_s4: s4 {
					regulator-min-microvolt	= <1800000>;
					regulator-max-microvolt	= <1800000>;
					qcom,switch-mode-frequency = <3200000>;
				};

				pm8921_s7: s7 {
					regulator-min-microvolt = <1300000>;
					regulator-max-microvolt = <1300000>;
					qcom,switch-mode-frequency = <3200000>;
				};

				pm8921_l3: l3 {
					regulator-min-microvolt = <3050000>;
					regulator-max-microvolt = <3300000>;
					bias-pull-down;
				};

				pm8921_l4: l4 {
					regulator-min-microvolt = <1000000>;
					regulator-max-microvolt = <1800000>;
					bias-pull-down;
				};

				pm8921_l5: l5 {
					regulator-min-microvolt = <2750000>;
					regulator-max-microvolt = <3000000>;
					bias-pull-down;
				};

				pm8921_l6: l6 {
					regulator-min-microvolt = <2950000>;
					regulator-max-microvolt = <2950000>;
					bias-pull-down;
				};

				pm8921_l23: l23 {
					regulator-min-microvolt = <1700000>;
					regulator-max-microvolt = <1900000>;
					bias-pull-down;
				};

				pm8921_lvs1: lvs1 {
					bias-pull-down;
				};
			};
		};

		ext_3p3v: regulator-fixed@1 {
			compatible = "regulator-fixed";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			regulator-name = "ext_3p3v";
			regulator-type = "voltage";
			startup-delay-us = <0>;
			gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
			enable-active-high;
			regulator-boot-on;
		};

		gsbi3: gsbi@16200000 {
			status = "okay";
			qcom,mode = <GSBI_PROT_I2C>;
			i2c3: i2c@16280000 {
				status = "okay";
				pinctrl-0 = <&i2c3_pins>;
				pinctrl-names = "default";
			};
		};

		gsbi@12440000 {
			status = "okay";
			qcom,mode = <GSBI_PROT_I2C>;

			i2c@12460000 {
				status = "okay";
				clock-frequency = <200000>;
				pinctrl-0 = <&i2c1_pins>;
				pinctrl-names = "default";

				eeprom: eeprom@52 {
					compatible = "atmel,24c128";
					reg = <0x52>;
					pagesize = <32>;
				};
			};
		};

		gsbi@16500000 {
			status = "ok";
			qcom,mode = <GSBI_PROT_I2C_UART>;

			serial@16540000 {
				status = "ok";

				pinctrl-names = "default";
				pinctrl-0 = <&uart_pins>;
			};
		};

		gsbi@16600000 {
			status = "ok";
			qcom,mode = <GSBI_PROT_I2C_UART>;
			serial@16640000 {
				status = "ok";
			};
		};

		sata_phy0: phy@1b400000 {
			status = "okay";
		};

		sata0: sata@29000000 {
			status		= "okay";
			target-supply	= <&pm8921_s4>;
		};

		/* OTG */
		usb1_phy: phy@12500000 {
			status		= "okay";
			vddcx-supply	= <&pm8921_s3>;
			v3p3-supply	= <&pm8921_l3>;
			v1p8-supply	= <&pm8921_l4>;
		};

		usb3_phy: phy@12520000 {
			status		= "okay";
			vddcx-supply	= <&pm8921_s3>;
			v3p3-supply	= <&pm8921_l3>;
			v1p8-supply	= <&pm8921_l23>;
		};

		usb4_phy: phy@12530000 {
			status		= "okay";
			vddcx-supply	= <&pm8921_s3>;
			v3p3-supply	= <&pm8921_l3>;
			v1p8-supply	= <&pm8921_l23>;
		};

		gadget1: gadget@12500000 {
			status = "okay";
		};

		/* OTG */
		usb1: usb@12500000 {
			status = "okay";
		};

		usb3: usb@12520000 {
			status = "okay";
		};

		usb4: usb@12530000 {
			status = "okay";
		};

		amba {
			/* eMMC */
			sdcc1: sdcc@12400000 {
				status = "okay";
				vmmc-supply = <&pm8921_l5>;
				vqmmc-supply = <&pm8921_s4>;
			};

			/* External micro SD card */
			sdcc3: sdcc@12180000 {
				status = "okay";
				vmmc-supply = <&pm8921_l6>;
				pinctrl-names	= "default";
				pinctrl-0	= <&card_detect>;
				cd-gpios	= <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
			};
			/* WLAN */
			sdcc4: sdcc@121c0000 {
				status = "okay";
				vmmc-supply = <&ext_3p3v>;
				vqmmc-supply = <&pm8921_lvs1>;
			};
		};
	};
};
Commit	Line	Data
f335b8af	1	#include "qcom-apq8064-v2.0.dtsi"
b4e10dd7	2	#include <dt-bindings/gpio/gpio.h>
f335b8af KG	3
	4	/ {
	5	model = "Qualcomm APQ8064/IFC6410";
	6	compatible = "qcom,apq8064-ifc6410", "qcom,apq8064";
	7
d5d4654e PG	8	aliases {
d5d4654e PG	9	serial0 = &gsbi7_serial;
86e252a4	10	serial1 = &gsbi6_serial;
d5d4654e PG	11	};
d5d4654e PG	12
7f9e28b6 SB	13	chosen {
	14	stdout-path = "serial0:115200n8";
	15	};
	16
f335b8af	17	soc {
8c3166f5	18	pinctrl@800000 {
b4e10dd7 PG	19	card_detect: card_detect {
	20	mux {
	21	pins = "gpio26";
	22	function = "gpio";
	23	bias-disable;
	24	};
	25	};
8c3166f5	26	};
8c3166f5	27
ad560450 SK	28	rpm@108000 {
	29	regulators {
	30	vin_lvs1_3_6-supply = <&pm8921_s4>;
	31	vin_lvs2-supply = <&pm8921_s1>;
	32	vin_lvs4_5_7-supply = <&pm8921_s4>;
	33
	34	vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
	35	vdd_l24-supply = <&pm8921_s1>;
	36	vdd_l25-supply = <&pm8921_s1>;
	37	vdd_l26-supply = <&pm8921_s7>;
	38	vdd_l27-supply = <&pm8921_s7>;
	39	vdd_l28-supply = <&pm8921_s7>;
	40
	41
	42	/* Buck SMPS */
	43	pm8921_s1: s1 {
	44	regulator-always-on;
	45	regulator-min-microvolt = <1225000>;
	46	regulator-max-microvolt = <1225000>;
	47	qcom,switch-mode-frequency = <3200000>;
	48	bias-pull-down;
	49	};
	50
	51	pm8921_s3: s3 {
	52	regulator-min-microvolt = <1000000>;
	53	regulator-max-microvolt = <1400000>;
	54	qcom,switch-mode-frequency = <4800000>;
	55	};
	56
	57	pm8921_s4: s4 {
	58	regulator-min-microvolt = <1800000>;
	59	regulator-max-microvolt = <1800000>;
	60	qcom,switch-mode-frequency = <3200000>;
	61	};
	62
	63	pm8921_s7: s7 {
	64	regulator-min-microvolt = <1300000>;
	65	regulator-max-microvolt = <1300000>;
	66	qcom,switch-mode-frequency = <3200000>;
	67	};
	68
	69	pm8921_l3: l3 {
	70	regulator-min-microvolt = <3050000>;
	71	regulator-max-microvolt = <3300000>;
	72	bias-pull-down;
	73	};
	74
	75	pm8921_l4: l4 {
	76	regulator-min-microvolt = <1000000>;
	77	regulator-max-microvolt = <1800000>;
	78	bias-pull-down;
	79	};
	80
2736bbac SK	81	pm8921_l5: l5 {
	82	regulator-min-microvolt = <2750000>;
	83	regulator-max-microvolt = <3000000>;
	84	bias-pull-down;
	85	};
	86
ad560450 SK	87	pm8921_l6: l6 {
	88	regulator-min-microvolt = <2950000>;
	89	regulator-max-microvolt = <2950000>;
	90	bias-pull-down;
	91	};
	92
	93	pm8921_l23: l23 {
	94	regulator-min-microvolt = <1700000>;
	95	regulator-max-microvolt = <1900000>;
	96	bias-pull-down;
	97	};
2736bbac SK	98
	99	pm8921_lvs1: lvs1 {
	100	bias-pull-down;
	101	};
ad560450 SK	102	};
	103	};
	104
2736bbac SK	105	ext_3p3v: regulator-fixed@1 {
	106	compatible = "regulator-fixed";
	107	regulator-min-microvolt = <3300000>;
	108	regulator-max-microvolt = <3300000>;
	109	regulator-name = "ext_3p3v";
	110	regulator-type = "voltage";
	111	startup-delay-us = <0>;
	112	gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
	113	enable-active-high;
	114	regulator-boot-on;
	115	};
	116
3f62b46b SK	117	gsbi3: gsbi@16200000 {
	118	status = "okay";
	119	qcom,mode = <GSBI_PROT_I2C>;
	120	i2c3: i2c@16280000 {
	121	status = "okay";
	122	pinctrl-0 = <&i2c3_pins>;
	123	pinctrl-names = "default";
	124	};
	125	};
	126
8c3166f5	127	gsbi@12440000 {
	128	status = "okay";
	129	qcom,mode = <GSBI_PROT_I2C>;
	130
	131	i2c@12460000 {
	132	status = "okay";
	133	clock-frequency = <200000>;
	134	pinctrl-0 = <&i2c1_pins>;
	135	pinctrl-names = "default";
	136
	137	eeprom: eeprom@52 {
	138	compatible = "atmel,24c128";
	139	reg = <0x52>;
	140	pagesize = <32>;
	141	};
	142	};
	143	};
	144
86e252a4 PG	145	gsbi@16500000 {
	146	status = "ok";
	147	qcom,mode = <GSBI_PROT_I2C_UART>;
	148
	149	serial@16540000 {
	150	status = "ok";
	151
	152	pinctrl-names = "default";
	153	pinctrl-0 = <&uart_pins>;
	154	};
	155	};
	156
f335b8af KG	157	gsbi@16600000 {
	158	status = "ok";
	159	qcom,mode = <GSBI_PROT_I2C_UART>;
	160	serial@16640000 {
	161	status = "ok";
	162	};
	163	};
045644ff	164
e629335f SK	165	sata_phy0: phy@1b400000 {
	166	status = "okay";
	167	};
	168
	169	sata0: sata@29000000 {
	170	status = "okay";
	171	target-supply = <&pm8921_s4>;
	172	};
	173
ea986611 SK	174	/* OTG */
	175	usb1_phy: phy@12500000 {
	176	status = "okay";
	177	vddcx-supply = <&pm8921_s3>;
	178	v3p3-supply = <&pm8921_l3>;
	179	v1p8-supply = <&pm8921_l4>;
	180	};
	181
223280b1 SK	182	usb3_phy: phy@12520000 {
	183	status = "okay";
	184	vddcx-supply = <&pm8921_s3>;
	185	v3p3-supply = <&pm8921_l3>;
	186	v1p8-supply = <&pm8921_l23>;
	187	};
	188
	189	usb4_phy: phy@12530000 {
	190	status = "okay";
	191	vddcx-supply = <&pm8921_s3>;
	192	v3p3-supply = <&pm8921_l3>;
	193	v1p8-supply = <&pm8921_l23>;
	194	};
	195
ea986611 SK	196	gadget1: gadget@12500000 {
	197	status = "okay";
	198	};
	199
	200	/* OTG */
	201	usb1: usb@12500000 {
	202	status = "okay";
	203	};
	204
223280b1 SK	205	usb3: usb@12520000 {
	206	status = "okay";
	207	};
	208
	209	usb4: usb@12530000 {
	210	status = "okay";
	211	};
	212
045644ff SK	213	amba {
	214	/* eMMC */
	215	sdcc1: sdcc@12400000 {
	216	status = "okay";
2736bbac SK	217	vmmc-supply = <&pm8921_l5>;
2736bbac SK	218	vqmmc-supply = <&pm8921_s4>;
045644ff SK	219	};
	220
	221	/* External micro SD card */
	222	sdcc3: sdcc@12180000 {
	223	status = "okay";
2736bbac	224	vmmc-supply = <&pm8921_l6>;
b4e10dd7 PG	225	pinctrl-names = "default";
	226	pinctrl-0 = <&card_detect>;
	227	cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
045644ff	228	};
0be5fef1 SK	229	/* WLAN */
	230	sdcc4: sdcc@121c0000 {
	231	status = "okay";
2736bbac SK	232	vmmc-supply = <&ext_3p3v>;
2736bbac SK	233	vqmmc-supply = <&pm8921_lvs1>;
0be5fef1	234	};
045644ff	235	};
f335b8af KG	236	};
f335b8af KG	237	};