Commit | Line | Data |
---|---|---|
3cc828fd MD |
1 | /* |
2 | * Device Tree Source for the Lager board | |
3 | * | |
da4ea951 SS |
4 | * Copyright (C) 2013-2014 Renesas Solutions Corp. |
5 | * Copyright (C) 2014 Cogent Embedded, Inc. | |
880cb570 | 6 | * Copyright (C) 2015-2016 Renesas Electronics Corporation |
3cc828fd MD |
7 | * |
8 | * This file is licensed under the terms of the GNU General Public License | |
9 | * version 2. This program is licensed "as is" without any warranty of any | |
10 | * kind, whether express or implied. | |
11 | */ | |
12 | ||
8ea7a44a KM |
13 | /* |
14 | * SSI-AK4643 | |
15 | * | |
16 | * SW1: 1: AK4643 | |
17 | * 2: CN22 | |
18 | * 3: ADV7511 | |
19 | * | |
20 | * This command is required when Playback/Capture | |
21 | * | |
22 | * amixer set "LINEOUT Mixer DACL" on | |
e110c541 KM |
23 | * amixer set "DVC Out" 100% |
24 | * amixer set "DVC In" 100% | |
25 | * | |
26 | * You can use Mute | |
27 | * | |
28 | * amixer set "DVC Out Mute" on | |
29 | * amixer set "DVC In Mute" on | |
bd2e4a62 KM |
30 | * |
31 | * You can use Volume Ramp | |
32 | * | |
33 | * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps" | |
34 | * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps" | |
35 | * amixer set "DVC Out Ramp" on | |
36 | * aplay xxx.wav & | |
37 | * amixer set "DVC Out" 80% // Volume Down | |
38 | * amixer set "DVC Out" 100% // Volume Up | |
8ea7a44a KM |
39 | */ |
40 | ||
3cc828fd | 41 | /dts-v1/; |
31c46cbf | 42 | #include "r8a7790.dtsi" |
39fa511b | 43 | #include <dt-bindings/gpio/gpio.h> |
f7dcd382 | 44 | #include <dt-bindings/input/input.h> |
3cc828fd MD |
45 | |
46 | / { | |
47 | model = "Lager"; | |
48 | compatible = "renesas,lager", "renesas,r8a7790"; | |
49 | ||
4e9c4877 | 50 | aliases { |
430d7bad | 51 | serial0 = &scif0; |
78c11ec2 | 52 | serial1 = &scifa1; |
880cb570 | 53 | i2c8 = "i2cexio"; |
4e9c4877 LP |
54 | }; |
55 | ||
3cc828fd | 56 | chosen { |
569dd56c | 57 | bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; |
57d19f81 | 58 | stdout-path = "serial0:115200n8"; |
3cc828fd MD |
59 | }; |
60 | ||
61 | memory@40000000 { | |
62 | device_type = "memory"; | |
7b16c61a | 63 | reg = <0 0x40000000 0 0x40000000>; |
3cc828fd MD |
64 | }; |
65 | ||
126f998e | 66 | memory@140000000 { |
62bc32a2 | 67 | device_type = "memory"; |
7b16c61a | 68 | reg = <1 0x40000000 0 0xc0000000>; |
62bc32a2 MD |
69 | }; |
70 | ||
3cc828fd MD |
71 | lbsc { |
72 | #address-cells = <1>; | |
73 | #size-cells = <1>; | |
74 | }; | |
39fa511b | 75 | |
54caf681 | 76 | keyboard { |
f7dcd382 MD |
77 | compatible = "gpio-keys"; |
78 | ||
79 | button@1 { | |
80 | linux,code = <KEY_1>; | |
81 | label = "SW2-1"; | |
0cc16889 | 82 | wakeup-source; |
f7dcd382 MD |
83 | debounce-interval = <20>; |
84 | gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; | |
85 | }; | |
86 | button@2 { | |
87 | linux,code = <KEY_2>; | |
88 | label = "SW2-2"; | |
0cc16889 | 89 | wakeup-source; |
f7dcd382 MD |
90 | debounce-interval = <20>; |
91 | gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; | |
92 | }; | |
93 | button@3 { | |
94 | linux,code = <KEY_3>; | |
95 | label = "SW2-3"; | |
0cc16889 | 96 | wakeup-source; |
f7dcd382 MD |
97 | debounce-interval = <20>; |
98 | gpios = <&gpio1 26 GPIO_ACTIVE_LOW>; | |
99 | }; | |
100 | button@4 { | |
101 | linux,code = <KEY_4>; | |
102 | label = "SW2-4"; | |
0cc16889 | 103 | wakeup-source; |
f7dcd382 MD |
104 | debounce-interval = <20>; |
105 | gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; | |
106 | }; | |
107 | }; | |
108 | ||
39fa511b LP |
109 | leds { |
110 | compatible = "gpio-leds"; | |
111 | led6 { | |
112 | gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>; | |
113 | }; | |
114 | led7 { | |
115 | gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>; | |
116 | }; | |
117 | led8 { | |
118 | gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>; | |
119 | }; | |
120 | }; | |
121 | ||
122 | fixedregulator3v3: fixedregulator@0 { | |
123 | compatible = "regulator-fixed"; | |
124 | regulator-name = "fixed-3.3V"; | |
125 | regulator-min-microvolt = <3300000>; | |
126 | regulator-max-microvolt = <3300000>; | |
127 | regulator-boot-on; | |
128 | regulator-always-on; | |
129 | }; | |
c6119944 KM |
130 | |
131 | vcc_sdhi0: regulator@1 { | |
132 | compatible = "regulator-fixed"; | |
133 | ||
134 | regulator-name = "SDHI0 Vcc"; | |
135 | regulator-min-microvolt = <3300000>; | |
136 | regulator-max-microvolt = <3300000>; | |
137 | ||
138 | gpio = <&gpio5 24 GPIO_ACTIVE_HIGH>; | |
139 | enable-active-high; | |
140 | }; | |
141 | ||
142 | vccq_sdhi0: regulator@2 { | |
143 | compatible = "regulator-gpio"; | |
144 | ||
145 | regulator-name = "SDHI0 VccQ"; | |
146 | regulator-min-microvolt = <1800000>; | |
147 | regulator-max-microvolt = <3300000>; | |
148 | ||
149 | gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>; | |
150 | gpios-states = <1>; | |
151 | states = <3300000 1 | |
152 | 1800000 0>; | |
153 | }; | |
154 | ||
155 | vcc_sdhi2: regulator@3 { | |
156 | compatible = "regulator-fixed"; | |
157 | ||
158 | regulator-name = "SDHI2 Vcc"; | |
159 | regulator-min-microvolt = <3300000>; | |
160 | regulator-max-microvolt = <3300000>; | |
161 | ||
162 | gpio = <&gpio5 25 GPIO_ACTIVE_HIGH>; | |
163 | enable-active-high; | |
164 | }; | |
165 | ||
166 | vccq_sdhi2: regulator@4 { | |
167 | compatible = "regulator-gpio"; | |
168 | ||
169 | regulator-name = "SDHI2 VccQ"; | |
170 | regulator-min-microvolt = <1800000>; | |
171 | regulator-max-microvolt = <3300000>; | |
172 | ||
173 | gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>; | |
174 | gpios-states = <1>; | |
175 | states = <3300000 1 | |
176 | 1800000 0>; | |
177 | }; | |
3edd18ff | 178 | |
a5bad2c7 | 179 | audio_clock: audio_clock { |
6bc651af KM |
180 | compatible = "fixed-clock"; |
181 | #clock-cells = <0>; | |
182 | clock-frequency = <11289600>; | |
6bc651af KM |
183 | }; |
184 | ||
30be0ba5 | 185 | rsnd_ak4643: sound { |
8ea7a44a KM |
186 | compatible = "simple-audio-card"; |
187 | ||
188 | simple-audio-card,format = "left_j"; | |
189 | simple-audio-card,bitclock-master = <&sndcodec>; | |
190 | simple-audio-card,frame-master = <&sndcodec>; | |
191 | ||
192 | sndcpu: simple-audio-card,cpu { | |
193 | sound-dai = <&rcar_sound>; | |
194 | }; | |
195 | ||
196 | sndcodec: simple-audio-card,codec { | |
197 | sound-dai = <&ak4643>; | |
6bc651af | 198 | clocks = <&audio_clock>; |
8ea7a44a KM |
199 | }; |
200 | }; | |
201 | ||
3edd18ff LP |
202 | vga-encoder { |
203 | compatible = "adi,adv7123"; | |
204 | ||
205 | ports { | |
206 | #address-cells = <1>; | |
207 | #size-cells = <0>; | |
208 | ||
209 | port@0 { | |
210 | reg = <0>; | |
211 | adv7123_in: endpoint { | |
212 | remote-endpoint = <&du_out_rgb>; | |
213 | }; | |
214 | }; | |
215 | port@1 { | |
216 | reg = <1>; | |
217 | adv7123_out: endpoint { | |
218 | remote-endpoint = <&vga_in>; | |
219 | }; | |
220 | }; | |
221 | }; | |
222 | }; | |
223 | ||
224 | vga { | |
225 | compatible = "vga-connector"; | |
226 | ||
227 | port { | |
228 | vga_in: endpoint { | |
229 | remote-endpoint = <&adv7123_out>; | |
230 | }; | |
231 | }; | |
232 | }; | |
fd25cdd1 LP |
233 | |
234 | hdmi-out { | |
235 | compatible = "hdmi-connector"; | |
236 | type = "a"; | |
237 | ||
238 | port { | |
239 | hdmi_con: endpoint { | |
240 | remote-endpoint = <&adv7511_out>; | |
241 | }; | |
242 | }; | |
243 | }; | |
26c00ab4 LP |
244 | |
245 | x2_clk: x2-clock { | |
246 | compatible = "fixed-clock"; | |
247 | #clock-cells = <0>; | |
248 | clock-frequency = <148500000>; | |
249 | }; | |
250 | ||
251 | x13_clk: x13-clock { | |
252 | compatible = "fixed-clock"; | |
253 | #clock-cells = <0>; | |
254 | clock-frequency = <148500000>; | |
255 | }; | |
880cb570 WS |
256 | |
257 | /* | |
258 | * IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only. | |
259 | * We use the I2C demuxer, so the desired IP core can be selected at runtime | |
260 | * depending on the use case (e.g. DMA with IIC0 or slave support with I2C0). | |
261 | * Note: For testing the I2C slave feature, it is convenient to connect this | |
262 | * bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and | |
263 | * instantiate the slave device at runtime according to the documentation. | |
264 | * You can then communicate with the slave via IIC3. | |
265 | */ | |
266 | i2cexio: i2c@8 { | |
267 | compatible = "i2c-demux-pinctrl"; | |
268 | i2c-parent = <&iic0>, <&i2c0>; | |
269 | i2c-bus-name = "i2c-exio"; | |
270 | #address-cells = <1>; | |
271 | #size-cells = <0>; | |
272 | }; | |
3edd18ff LP |
273 | }; |
274 | ||
275 | &du { | |
276 | pinctrl-0 = <&du_pins>; | |
277 | pinctrl-names = "default"; | |
278 | status = "okay"; | |
279 | ||
26c00ab4 LP |
280 | clocks = <&mstp7_clks R8A7790_CLK_DU0>, |
281 | <&mstp7_clks R8A7790_CLK_DU1>, | |
282 | <&mstp7_clks R8A7790_CLK_DU2>, | |
283 | <&mstp7_clks R8A7790_CLK_LVDS0>, | |
284 | <&mstp7_clks R8A7790_CLK_LVDS1>, | |
285 | <&x13_clk>, <&x2_clk>; | |
286 | clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1", | |
287 | "dclkin.0", "dclkin.1"; | |
288 | ||
3edd18ff LP |
289 | ports { |
290 | port@0 { | |
291 | endpoint { | |
292 | remote-endpoint = <&adv7123_in>; | |
293 | }; | |
294 | }; | |
fd25cdd1 LP |
295 | port@1 { |
296 | endpoint { | |
297 | remote-endpoint = <&adv7511_in>; | |
298 | }; | |
299 | }; | |
3edd18ff LP |
300 | port@2 { |
301 | lvds_connector: endpoint { | |
302 | }; | |
303 | }; | |
304 | }; | |
39fa511b LP |
305 | }; |
306 | ||
62e43056 LP |
307 | &extal_clk { |
308 | clock-frequency = <20000000>; | |
309 | }; | |
310 | ||
39fa511b | 311 | &pfc { |
1781460c GU |
312 | pinctrl-0 = <&scif_clk_pins>; |
313 | pinctrl-names = "default"; | |
314 | ||
3024f507 | 315 | du_pins: du { |
2ffc224f SH |
316 | groups = "du_rgb666", "du_sync_1", "du_clk_out_0"; |
317 | function = "du"; | |
3024f507 LP |
318 | }; |
319 | ||
430d7bad | 320 | scif0_pins: serial0 { |
2ffc224f SH |
321 | groups = "scif0_data"; |
322 | function = "scif0"; | |
39fa511b LP |
323 | }; |
324 | ||
1781460c | 325 | scif_clk_pins: scif_clk { |
2ffc224f SH |
326 | groups = "scif_clk"; |
327 | function = "scif_clk"; | |
1781460c GU |
328 | }; |
329 | ||
da4ea951 | 330 | ether_pins: ether { |
2ffc224f SH |
331 | groups = "eth_link", "eth_mdio", "eth_rmii"; |
332 | function = "eth"; | |
da4ea951 SS |
333 | }; |
334 | ||
335 | phy1_pins: phy1 { | |
2ffc224f SH |
336 | groups = "intc_irq0"; |
337 | function = "intc"; | |
da4ea951 SS |
338 | }; |
339 | ||
7c055894 | 340 | scifa1_pins: serial1 { |
2ffc224f SH |
341 | groups = "scifa1_data"; |
342 | function = "scifa1"; | |
39fa511b LP |
343 | }; |
344 | ||
c6119944 | 345 | sdhi0_pins: sd0 { |
2ffc224f SH |
346 | groups = "sdhi0_data4", "sdhi0_ctrl"; |
347 | function = "sdhi0"; | |
1ca79699 WS |
348 | power-source = <3300>; |
349 | }; | |
350 | ||
351 | sdhi0_pins_uhs: sd0_uhs { | |
352 | groups = "sdhi0_data4", "sdhi0_ctrl"; | |
353 | function = "sdhi0"; | |
354 | power-source = <1800>; | |
c6119944 KM |
355 | }; |
356 | ||
357 | sdhi2_pins: sd2 { | |
2ffc224f SH |
358 | groups = "sdhi2_data4", "sdhi2_ctrl"; |
359 | function = "sdhi2"; | |
1ca79699 WS |
360 | power-source = <3300>; |
361 | }; | |
362 | ||
363 | sdhi2_pins_uhs: sd2_uhs { | |
364 | groups = "sdhi2_data4", "sdhi2_ctrl"; | |
365 | function = "sdhi2"; | |
366 | power-source = <1800>; | |
c6119944 KM |
367 | }; |
368 | ||
39fa511b | 369 | mmc1_pins: mmc1 { |
2ffc224f SH |
370 | groups = "mmc1_data8", "mmc1_ctrl"; |
371 | function = "mmc1"; | |
39fa511b | 372 | }; |
9fe7c4f8 | 373 | |
fad6d45c | 374 | qspi_pins: spi0 { |
2ffc224f SH |
375 | groups = "qspi_ctrl", "qspi_data4"; |
376 | function = "qspi"; | |
9fe7c4f8 | 377 | }; |
b0403b91 GU |
378 | |
379 | msiof1_pins: spi2 { | |
2ffc224f | 380 | groups = "msiof1_clk", "msiof1_sync", "msiof1_rx", |
b0403b91 | 381 | "msiof1_tx"; |
2ffc224f | 382 | function = "msiof1"; |
b0403b91 | 383 | }; |
05f72e03 | 384 | |
880cb570 | 385 | i2c0_pins: i2c0 { |
2ffc224f SH |
386 | groups = "i2c0"; |
387 | function = "i2c0"; | |
880cb570 WS |
388 | }; |
389 | ||
535118ca | 390 | iic0_pins: iic0 { |
2ffc224f SH |
391 | groups = "iic0"; |
392 | function = "iic0"; | |
535118ca WS |
393 | }; |
394 | ||
cb9a2b12 | 395 | iic1_pins: iic1 { |
2ffc224f SH |
396 | groups = "iic1"; |
397 | function = "iic1"; | |
d90bf60c SH |
398 | }; |
399 | ||
cb9a2b12 | 400 | iic2_pins: iic2 { |
2ffc224f SH |
401 | groups = "iic2"; |
402 | function = "iic2"; | |
d90bf60c SH |
403 | }; |
404 | ||
5179ffd0 | 405 | iic3_pins: iic3 { |
2ffc224f SH |
406 | groups = "iic3"; |
407 | function = "iic3"; | |
05f72e03 | 408 | }; |
d8584660 | 409 | |
e03074a7 | 410 | hsusb_pins: hsusb { |
2ffc224f SH |
411 | groups = "usb0_ovc_vbus"; |
412 | function = "usb0"; | |
e03074a7 YS |
413 | }; |
414 | ||
d8584660 | 415 | usb0_pins: usb0 { |
2ffc224f SH |
416 | groups = "usb0"; |
417 | function = "usb0"; | |
d8584660 BD |
418 | }; |
419 | ||
420 | usb1_pins: usb1 { | |
2ffc224f SH |
421 | groups = "usb1"; |
422 | function = "usb1"; | |
d8584660 BD |
423 | }; |
424 | ||
425 | usb2_pins: usb2 { | |
2ffc224f SH |
426 | groups = "usb2"; |
427 | function = "usb2"; | |
d8584660 | 428 | }; |
d594c977 BD |
429 | |
430 | vin1_pins: vin { | |
2ffc224f SH |
431 | groups = "vin1_data8", "vin1_clk"; |
432 | function = "vin1"; | |
d594c977 | 433 | }; |
8ea7a44a KM |
434 | |
435 | sound_pins: sound { | |
2ffc224f SH |
436 | groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data"; |
437 | function = "ssi"; | |
8ea7a44a KM |
438 | }; |
439 | ||
440 | sound_clk_pins: sound_clk { | |
2ffc224f SH |
441 | groups = "audio_clk_a"; |
442 | function = "audio_clk"; | |
8ea7a44a | 443 | }; |
39fa511b LP |
444 | }; |
445 | ||
da4ea951 SS |
446 | ðer { |
447 | pinctrl-0 = <ðer_pins &phy1_pins>; | |
448 | pinctrl-names = "default"; | |
449 | ||
450 | phy-handle = <&phy1>; | |
451 | renesas,ether-link-active-low; | |
fd7a8cbf | 452 | status = "okay"; |
da4ea951 SS |
453 | |
454 | phy1: ethernet-phy@1 { | |
455 | reg = <1>; | |
456 | interrupt-parent = <&irqc0>; | |
457 | interrupts = <0 IRQ_TYPE_LEVEL_LOW>; | |
1c47a6aa | 458 | micrel,led-mode = <1>; |
da4ea951 SS |
459 | }; |
460 | }; | |
461 | ||
247fd5ec | 462 | &cmt0 { |
fd7a8cbf | 463 | status = "okay"; |
247fd5ec LP |
464 | }; |
465 | ||
39fa511b LP |
466 | &mmcif1 { |
467 | pinctrl-0 = <&mmc1_pins>; | |
468 | pinctrl-names = "default"; | |
469 | ||
470 | vmmc-supply = <&fixedregulator3v3>; | |
471 | bus-width = <8>; | |
472 | non-removable; | |
473 | status = "okay"; | |
3cc828fd | 474 | }; |
c6181b9f VB |
475 | |
476 | &sata1 { | |
477 | status = "okay"; | |
478 | }; | |
9fe7c4f8 | 479 | |
fad6d45c | 480 | &qspi { |
9fe7c4f8 GU |
481 | pinctrl-0 = <&qspi_pins>; |
482 | pinctrl-names = "default"; | |
483 | ||
484 | status = "okay"; | |
485 | ||
486 | flash: flash@0 { | |
755185b2 | 487 | compatible = "spansion,s25fl512s", "jedec,spi-nor"; |
9fe7c4f8 GU |
488 | reg = <0>; |
489 | spi-max-frequency = <30000000>; | |
9909d2cb GU |
490 | spi-tx-bus-width = <4>; |
491 | spi-rx-bus-width = <4>; | |
cbf41168 HN |
492 | spi-cpha; |
493 | spi-cpol; | |
9fe7c4f8 GU |
494 | m25p,fast-read; |
495 | ||
f58bac70 | 496 | partitions { |
b88ddbdd | 497 | compatible = "fixed-partitions"; |
f58bac70 GU |
498 | #address-cells = <1>; |
499 | #size-cells = <1>; | |
500 | ||
501 | partition@0 { | |
502 | label = "loader"; | |
503 | reg = <0x00000000 0x00040000>; | |
504 | read-only; | |
505 | }; | |
506 | partition@40000 { | |
507 | label = "user"; | |
508 | reg = <0x00040000 0x00400000>; | |
509 | read-only; | |
510 | }; | |
511 | partition@440000 { | |
512 | label = "flash"; | |
513 | reg = <0x00440000 0x03bc0000>; | |
514 | }; | |
9fe7c4f8 GU |
515 | }; |
516 | }; | |
517 | }; | |
c6119944 | 518 | |
430d7bad UH |
519 | &scif0 { |
520 | pinctrl-0 = <&scif0_pins>; | |
4e9c4877 LP |
521 | pinctrl-names = "default"; |
522 | ||
523 | status = "okay"; | |
524 | }; | |
525 | ||
7c055894 WS |
526 | &scifa1 { |
527 | pinctrl-0 = <&scifa1_pins>; | |
4e9c4877 LP |
528 | pinctrl-names = "default"; |
529 | ||
530 | status = "okay"; | |
531 | }; | |
532 | ||
1781460c GU |
533 | &scif_clk { |
534 | clock-frequency = <14745600>; | |
535 | status = "okay"; | |
536 | }; | |
537 | ||
b0403b91 GU |
538 | &msiof1 { |
539 | pinctrl-0 = <&msiof1_pins>; | |
540 | pinctrl-names = "default"; | |
541 | ||
542 | status = "okay"; | |
543 | ||
544 | pmic: pmic@0 { | |
545 | compatible = "renesas,r2a11302ft"; | |
546 | reg = <0>; | |
547 | spi-max-frequency = <6000000>; | |
548 | spi-cpol; | |
549 | spi-cpha; | |
550 | }; | |
b0403b91 GU |
551 | }; |
552 | ||
c6119944 KM |
553 | &sdhi0 { |
554 | pinctrl-0 = <&sdhi0_pins>; | |
1ca79699 WS |
555 | pinctrl-1 = <&sdhi0_pins_uhs>; |
556 | pinctrl-names = "default", "state_uhs"; | |
c6119944 KM |
557 | |
558 | vmmc-supply = <&vcc_sdhi0>; | |
559 | vqmmc-supply = <&vccq_sdhi0>; | |
560 | cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; | |
1ca79699 | 561 | sd-uhs-sdr50; |
c6119944 KM |
562 | status = "okay"; |
563 | }; | |
564 | ||
565 | &sdhi2 { | |
566 | pinctrl-0 = <&sdhi2_pins>; | |
1ca79699 WS |
567 | pinctrl-1 = <&sdhi2_pins_uhs>; |
568 | pinctrl-names = "default", "state_uhs"; | |
c6119944 KM |
569 | |
570 | vmmc-supply = <&vcc_sdhi2>; | |
571 | vqmmc-supply = <&vccq_sdhi2>; | |
572 | cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>; | |
1ca79699 | 573 | sd-uhs-sdr50; |
c6119944 KM |
574 | status = "okay"; |
575 | }; | |
05f72e03 | 576 | |
b989e138 BC |
577 | &cpu0 { |
578 | cpu0-supply = <&vdd_dvfs>; | |
579 | }; | |
e489c2a9 | 580 | |
880cb570 WS |
581 | &i2c0 { |
582 | pinctrl-0 = <&i2c0_pins>; | |
583 | pinctrl-names = "i2c-exio"; | |
584 | }; | |
585 | ||
cb9a2b12 | 586 | &iic0 { |
535118ca | 587 | pinctrl-0 = <&iic0_pins>; |
880cb570 | 588 | pinctrl-names = "i2c-exio"; |
e489c2a9 BD |
589 | }; |
590 | ||
cb9a2b12 | 591 | &iic1 { |
fd7a8cbf | 592 | status = "okay"; |
cb9a2b12 | 593 | pinctrl-0 = <&iic1_pins>; |
e1a2c4eb | 594 | pinctrl-names = "default"; |
e489c2a9 BD |
595 | }; |
596 | ||
cb9a2b12 | 597 | &iic2 { |
fd7a8cbf | 598 | status = "okay"; |
cb9a2b12 | 599 | pinctrl-0 = <&iic2_pins>; |
e1a2c4eb | 600 | pinctrl-names = "default"; |
d594c977 | 601 | |
177d8bea KM |
602 | clock-frequency = <100000>; |
603 | ||
d22b1687 | 604 | ak4643: codec@12 { |
8ea7a44a KM |
605 | compatible = "asahi-kasei,ak4643"; |
606 | #sound-dai-cells = <0>; | |
607 | reg = <0x12>; | |
608 | }; | |
609 | ||
d594c977 BD |
610 | composite-in@20 { |
611 | compatible = "adi,adv7180"; | |
612 | reg = <0x20>; | |
613 | remote = <&vin1>; | |
614 | ||
615 | port { | |
616 | adv7180: endpoint { | |
617 | bus-width = <8>; | |
618 | remote-endpoint = <&vin1ep0>; | |
619 | }; | |
620 | }; | |
621 | }; | |
fd25cdd1 LP |
622 | |
623 | hdmi@39 { | |
624 | compatible = "adi,adv7511w"; | |
625 | reg = <0x39>; | |
626 | interrupt-parent = <&gpio1>; | |
850346ec | 627 | interrupts = <15 IRQ_TYPE_LEVEL_LOW>; |
fd25cdd1 LP |
628 | |
629 | adi,input-depth = <8>; | |
630 | adi,input-colorspace = "rgb"; | |
631 | adi,input-clock = "1x"; | |
632 | adi,input-style = <1>; | |
633 | adi,input-justification = "evenly"; | |
634 | ||
635 | ports { | |
636 | #address-cells = <1>; | |
637 | #size-cells = <0>; | |
638 | ||
639 | port@0 { | |
640 | reg = <0>; | |
641 | adv7511_in: endpoint { | |
642 | remote-endpoint = <&du_out_lvds0>; | |
643 | }; | |
644 | }; | |
645 | ||
646 | port@1 { | |
647 | reg = <1>; | |
648 | adv7511_out: endpoint { | |
649 | remote-endpoint = <&hdmi_con>; | |
650 | }; | |
651 | }; | |
652 | }; | |
653 | }; | |
e489c2a9 BD |
654 | }; |
655 | ||
5179ffd0 | 656 | &iic3 { |
aca4ec44 | 657 | pinctrl-names = "default"; |
5179ffd0 | 658 | pinctrl-0 = <&iic3_pins>; |
aca4ec44 SH |
659 | status = "okay"; |
660 | ||
46dd8a80 GU |
661 | pmic@58 { |
662 | compatible = "dlg,da9063"; | |
663 | reg = <0x58>; | |
664 | interrupt-parent = <&irqc0>; | |
665 | interrupts = <2 IRQ_TYPE_LEVEL_LOW>; | |
666 | interrupt-controller; | |
667 | ||
668 | rtc { | |
669 | compatible = "dlg,da9063-rtc"; | |
670 | }; | |
671 | ||
672 | wdt { | |
673 | compatible = "dlg,da9063-watchdog"; | |
674 | }; | |
675 | }; | |
676 | ||
aca4ec44 | 677 | vdd_dvfs: regulator@68 { |
bd597f47 | 678 | compatible = "dlg,da9210"; |
aca4ec44 | 679 | reg = <0x68>; |
ceb77479 GU |
680 | interrupt-parent = <&irqc0>; |
681 | interrupts = <2 IRQ_TYPE_LEVEL_LOW>; | |
aca4ec44 SH |
682 | |
683 | regulator-min-microvolt = <1000000>; | |
684 | regulator-max-microvolt = <1000000>; | |
685 | regulator-boot-on; | |
686 | regulator-always-on; | |
687 | }; | |
e489c2a9 | 688 | }; |
d8584660 BD |
689 | |
690 | &pci0 { | |
691 | status = "okay"; | |
692 | pinctrl-0 = <&usb0_pins>; | |
693 | pinctrl-names = "default"; | |
694 | }; | |
695 | ||
696 | &pci1 { | |
697 | status = "okay"; | |
698 | pinctrl-0 = <&usb1_pins>; | |
699 | pinctrl-names = "default"; | |
700 | }; | |
701 | ||
37f7c1b0 YS |
702 | &xhci { |
703 | status = "okay"; | |
704 | pinctrl-0 = <&usb2_pins>; | |
705 | pinctrl-names = "default"; | |
706 | }; | |
707 | ||
d8584660 BD |
708 | &pci2 { |
709 | status = "okay"; | |
710 | pinctrl-0 = <&usb2_pins>; | |
711 | pinctrl-names = "default"; | |
712 | }; | |
d594c977 | 713 | |
e03074a7 YS |
714 | &hsusb { |
715 | status = "okay"; | |
716 | pinctrl-0 = <&hsusb_pins>; | |
717 | pinctrl-names = "default"; | |
718 | renesas,enable-gpio = <&gpio5 18 GPIO_ACTIVE_HIGH>; | |
719 | }; | |
720 | ||
6742cafb SS |
721 | &usbphy { |
722 | status = "okay"; | |
723 | }; | |
724 | ||
d594c977 BD |
725 | /* composite video input */ |
726 | &vin1 { | |
727 | pinctrl-0 = <&vin1_pins>; | |
728 | pinctrl-names = "default"; | |
729 | ||
fd7a8cbf | 730 | status = "okay"; |
d594c977 BD |
731 | |
732 | port { | |
733 | #address-cells = <1>; | |
734 | #size-cells = <0>; | |
735 | ||
736 | vin1ep0: endpoint { | |
737 | remote-endpoint = <&adv7180>; | |
738 | bus-width = <8>; | |
739 | }; | |
740 | }; | |
741 | }; | |
8ea7a44a KM |
742 | |
743 | &rcar_sound { | |
744 | pinctrl-0 = <&sound_pins &sound_clk_pins>; | |
745 | pinctrl-names = "default"; | |
746 | ||
ad63241c | 747 | /* Single DAI */ |
8ea7a44a KM |
748 | #sound-dai-cells = <0>; |
749 | ||
750 | status = "okay"; | |
751 | ||
752 | rcar_sound,dai { | |
753 | dai0 { | |
e110c541 KM |
754 | playback = <&ssi0 &src2 &dvc0>; |
755 | capture = <&ssi1 &src3 &dvc1>; | |
8ea7a44a KM |
756 | }; |
757 | }; | |
758 | }; | |
759 | ||
8ea7a44a | 760 | &ssi1 { |
8ea7a44a KM |
761 | shared-pin; |
762 | }; |