[deliverable/linux.git] / arch / arm / boot / dts / rk3188-radxarock.dts

/*
 * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
 *
 * This file is dual-licensed: you can use it either under the terms
 * of the GPL or the X11 license, at your option. Note that this dual
 * licensing only applies to this file, and not this project as a
 * whole.
 *
 *  a) This file is free software; you can redistribute it and/or
 *     modify it under the terms of the GNU General Public License as
 *     published by the Free Software Foundation; either version 2 of the
 *     License, or (at your option) any later version.
 *
 *     This file is distributed in the hope that it will be useful,
 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *     GNU General Public License for more details.
 *
 * Or, alternatively,
 *
 *  b) Permission is hereby granted, free of charge, to any person
 *     obtaining a copy of this software and associated documentation
 *     files (the "Software"), to deal in the Software without
 *     restriction, including without limitation the rights to use,
 *     copy, modify, merge, publish, distribute, sublicense, and/or
 *     sell copies of the Software, and to permit persons to whom the
 *     Software is furnished to do so, subject to the following
 *     conditions:
 *
 *     The above copyright notice and this permission notice shall be
 *     included in all copies or substantial portions of the Software.
 *
 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 *     OTHER DEALINGS IN THE SOFTWARE.
 */

/dts-v1/;
#include "rk3188.dtsi"

/ {
	model = "Radxa Rock";
	compatible = "radxa,rock", "rockchip,rk3188";

	memory {
		device_type = "memory";
		reg = <0x60000000 0x80000000>;
	};

	gpio-keys {
		compatible = "gpio-keys";
		#address-cells = <1>;
		#size-cells = <0>;
		autorepeat;

		button@0 {
			gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
			linux,code = <116>;
			label = "GPIO Key Power";
			linux,input-type = <1>;
			gpio-key,wakeup = <1>;
			debounce-interval = <100>;
		};
	};

	gpio-leds {
		compatible = "gpio-leds";

		green {
			label = "rock:green:user1";
			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
			default-state = "off";
		};

		blue {
			label = "rock:blue:user2";
			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
			default-state = "off";
		};

		sleep {
			label = "rock:red:power";
			gpios = <&gpio0 15 0>;
			default-state = "off";
		};
	};

	ir_recv: gpio-ir-receiver {
		compatible = "gpio-ir-receiver";
		gpios = <&gpio0 10 1>;
		pinctrl-names = "default";
		pinctrl-0 = <&ir_recv_pin>;
	};

	vcc_otg: usb-otg-regulator {
		compatible = "regulator-fixed";
		enable-active-high;
		gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&otg_vbus_drv>;
		regulator-name = "otg-vbus";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		regulator-always-on;
		regulator-boot-on;
	};

	vcc_sd0: sdmmc-regulator {
		compatible = "regulator-fixed";
		regulator-name = "sdmmc-supply";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		gpio = <&gpio3 1 GPIO_ACTIVE_LOW>;
		startup-delay-us = <100000>;
		vin-supply = <&vcc_io>;
	};

	vcc_host: usb-host-regulator {
		compatible = "regulator-fixed";
		enable-active-high;
		gpio = <&gpio0 3 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&host_vbus_drv>;
		regulator-name = "host-pwr";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		regulator-always-on;
		regulator-boot-on;
	};

	vsys: vsys-regulator {
		compatible = "regulator-fixed";
		regulator-name = "vsys";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		regulator-boot-on;
	};
};

&emac {
	status = "okay";

	pinctrl-names = "default";
	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;

	phy = <&phy0>;
	phy-supply = <&vcc_rmii>;

	phy0: ethernet-phy@0 {
		reg = <0>;
		interrupt-parent = <&gpio3>;
		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
	};
};

&cpu0 {
	cpu0-supply = <&vdd_arm>;
};

&i2c1 {
	status = "okay";
	clock-frequency = <400000>;

	rtc@51 {
		compatible = "haoyu,hym8563";
		reg = <0x51>;
		interrupt-parent = <&gpio0>;
		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
		pinctrl-names = "default";
		pinctrl-0 = <&rtc_int>;
		#clock-cells = <0>;
		clock-output-names = "xin32k";
	};

	act8846: act8846@5a {
		compatible = "active-semi,act8846";
		reg = <0x5a>;
		status = "okay";
		system-power-controller;

		pinctrl-names = "default";
		pinctrl-0 = <&act8846_dvs0_ctl>;

		vp1-supply = <&vsys>;
		vp2-supply = <&vsys>;
		vp3-supply = <&vsys>;
		vp4-supply = <&vsys>;
		inl1-supply = <&vcc_io>;
		inl2-supply = <&vsys>;
		inl3-supply = <&vsys>;

		regulators {
			vcc_ddr: REG1 {
				regulator-name = "VCC_DDR";
				regulator-min-microvolt = <1200000>;
				regulator-max-microvolt = <1200000>;
				regulator-always-on;
			};

			vdd_log: REG2 {
				regulator-name = "VDD_LOG";
				regulator-min-microvolt = <1000000>;
				regulator-max-microvolt = <1000000>;
				regulator-always-on;
			};

			vdd_arm: REG3 {
				regulator-name = "VDD_ARM";
				regulator-min-microvolt = <875000>;
				regulator-max-microvolt = <1350000>;
				regulator-always-on;
			};

			vcc_io: REG4 {
				regulator-name = "VCC_IO";
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;
				regulator-always-on;
			};

			vdd_10: REG5 {
				regulator-name = "VDD_10";
				regulator-min-microvolt = <1000000>;
				regulator-max-microvolt = <1000000>;
				regulator-always-on;
			};

			vdd_hdmi: REG6 {
				regulator-name = "VDD_HDMI";
				regulator-min-microvolt = <2500000>;
				regulator-max-microvolt = <2500000>;
				regulator-always-on;
			};

			vcc18: REG7 {
				regulator-name = "VCC_18";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-always-on;
			};

			vcca_33: REG8 {
				regulator-name = "VCCA_33";
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;
				regulator-always-on;
			};

			vcc_rmii: REG9 {
				regulator-name = "VCC_RMII";
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;
			};

			vccio_wl: REG10 {
				regulator-name = "VCCIO_WL";
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;
				regulator-always-on;
			};

			vcc_18: REG11 {
				regulator-name = "VCC18_IO";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-always-on;
			};

			vcc28: REG12 {
				regulator-name = "VCC_28";
				regulator-min-microvolt = <2800000>;
				regulator-max-microvolt = <2800000>;
				regulator-always-on;
			};
		};
	};
};

&mmc0 {
	num-slots = <1>;
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
	vmmc-supply = <&vcc_sd0>;

	bus-width = <4>;
	disable-wp;
};

&pwm1 {
	status = "okay";
};

&pwm2 {
	status = "okay";
};

&pwm3 {
	status = "okay";
};

&pinctrl {
	pcfg_output_low: pcfg-output-low {
		output-low;
	};

	act8846 {
		act8846_dvs0_ctl: act8846-dvs0-ctl {
			rockchip,pins = <RK_GPIO3 27 RK_FUNC_GPIO &pcfg_output_low>;
		};
	};

	hym8563 {
		rtc_int: rtc-int {
			rockchip,pins = <RK_GPIO0 0 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};

	lan8720a  {
		phy_int: phy-int {
			rockchip,pins = <RK_GPIO3 26 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};

	ir-receiver {
		ir_recv_pin: ir-recv-pin {
			rockchip,pins = <RK_GPIO0 10 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	usb {
		host_vbus_drv: host-vbus-drv {
			rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>;
		};
		otg_vbus_drv: otg-vbus-drv {
			rockchip,pins = <2 31 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};
};

&uart0 {
	status = "okay";
};

&uart1 {
	status = "okay";
};

&uart2 {
	status = "okay";
};

&uart3 {
	status = "okay";
};

&usb_host {
	status = "okay";
};

&usb_otg {
	status = "okay";
};

&wdt {
	status = "okay";
};
Commit	Line	Data
6bcf60f8 HS	1	/*
	2	* Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
	3	*
e068f498 HS	4	* This file is dual-licensed: you can use it either under the terms
	5	* of the GPL or the X11 license, at your option. Note that this dual
	6	* licensing only applies to this file, and not this project as a
	7	* whole.
6bcf60f8	8	*
e068f498 HS	9	* a) This file is free software; you can redistribute it and/or
	10	* modify it under the terms of the GNU General Public License as
	11	* published by the Free Software Foundation; either version 2 of the
	12	* License, or (at your option) any later version.
	13	*
	14	* This file is distributed in the hope that it will be useful,
	15	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	16	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	17	* GNU General Public License for more details.
	18	*
	19	* Or, alternatively,
	20	*
	21	* b) Permission is hereby granted, free of charge, to any person
	22	* obtaining a copy of this software and associated documentation
	23	* files (the "Software"), to deal in the Software without
	24	* restriction, including without limitation the rights to use,
	25	* copy, modify, merge, publish, distribute, sublicense, and/or
	26	* sell copies of the Software, and to permit persons to whom the
	27	* Software is furnished to do so, subject to the following
	28	* conditions:
	29	*
	30	* The above copyright notice and this permission notice shall be
	31	* included in all copies or substantial portions of the Software.
	32	*
	33	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
	34	* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
	35	* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
	36	* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
	37	* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
	38	* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
	39	* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
	40	* OTHER DEALINGS IN THE SOFTWARE.
6bcf60f8 HS	41	*/
	42
	43	/dts-v1/;
	44	#include "rk3188.dtsi"
	45
	46	/ {
	47	model = "Radxa Rock";
ac4eba8e	48	compatible = "radxa,rock", "rockchip,rk3188";
6bcf60f8 HS	49
6bcf60f8 HS	50	memory {
6158e6d0	51	device_type = "memory";
6bcf60f8 HS	52	reg = <0x60000000 0x80000000>;
	53	};
	54
c3030d30 HS	55	gpio-keys {
	56	compatible = "gpio-keys";
	57	#address-cells = <1>;
	58	#size-cells = <0>;
	59	autorepeat;
6bcf60f8	60
c3030d30 HS	61	button@0 {
	62	gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
	63	linux,code = <116>;
	64	label = "GPIO Key Power";
	65	linux,input-type = <1>;
	66	gpio-key,wakeup = <1>;
	67	debounce-interval = <100>;
6bcf60f8	68	};
c3030d30	69	};
6bcf60f8	70
c3030d30 HS	71	gpio-leds {
c3030d30 HS	72	compatible = "gpio-leds";
6bcf60f8	73
c3030d30	74	green {
3db5894b	75	label = "rock:green:user1";
c3030d30 HS	76	gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	77	default-state = "off";
	78	};
6bcf60f8	79
3db5894b RP	80	blue {
3db5894b RP	81	label = "rock:blue:user2";
c3030d30 HS	82	gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
c3030d30 HS	83	default-state = "off";
6bcf60f8 HS	84	};
6bcf60f8 HS	85
c3030d30	86	sleep {
3db5894b	87	label = "rock:red:power";
c3030d30 HS	88	gpios = <&gpio0 15 0>;
	89	default-state = "off";
	90	};
6bcf60f8	91	};
b09e35a3	92
08567053 BG	93	ir_recv: gpio-ir-receiver {
	94	compatible = "gpio-ir-receiver";
	95	gpios = <&gpio0 10 1>;
	96	pinctrl-names = "default";
	97	pinctrl-0 = <&ir_recv_pin>;
	98	};
	99
f1c8547f HS	100	vcc_otg: usb-otg-regulator {
	101	compatible = "regulator-fixed";
	102	enable-active-high;
	103	gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
	104	pinctrl-names = "default";
66fa6cf2	105	pinctrl-0 = <&otg_vbus_drv>;
f1c8547f HS	106	regulator-name = "otg-vbus";
	107	regulator-min-microvolt = <5000000>;
	108	regulator-max-microvolt = <5000000>;
	109	regulator-always-on;
	110	regulator-boot-on;
	111	};
	112
b09e35a3 HS	113	vcc_sd0: sdmmc-regulator {
	114	compatible = "regulator-fixed";
	115	regulator-name = "sdmmc-supply";
	116	regulator-min-microvolt = <3300000>;
	117	regulator-max-microvolt = <3300000>;
	118	gpio = <&gpio3 1 GPIO_ACTIVE_LOW>;
	119	startup-delay-us = <100000>;
	120	vin-supply = <&vcc_io>;
	121	};
f1c8547f HS	122
	123	vcc_host: usb-host-regulator {
	124	compatible = "regulator-fixed";
	125	enable-active-high;
	126	gpio = <&gpio0 3 GPIO_ACTIVE_HIGH>;
	127	pinctrl-names = "default";
66fa6cf2	128	pinctrl-0 = <&host_vbus_drv>;
f1c8547f HS	129	regulator-name = "host-pwr";
	130	regulator-min-microvolt = <5000000>;
	131	regulator-max-microvolt = <5000000>;
	132	regulator-always-on;
	133	regulator-boot-on;
	134	};
776920e1 HS	135
	136	vsys: vsys-regulator {
	137	compatible = "regulator-fixed";
	138	regulator-name = "vsys";
	139	regulator-min-microvolt = <5000000>;
	140	regulator-max-microvolt = <5000000>;
	141	regulator-boot-on;
	142	};
6bcf60f8	143	};
fcbbf965	144
c6ec956b RP	145	&emac {
	146	status = "okay";
	147
	148	pinctrl-names = "default";
	149	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
	150
	151	phy = <&phy0>;
	152	phy-supply = <&vcc_rmii>;
	153
	154	phy0: ethernet-phy@0 {
	155	reg = <0>;
	156	interrupt-parent = <&gpio3>;
	157	interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
	158	};
	159	};
	160
3adb1327 HS	161	&cpu0 {
	162	cpu0-supply = <&vdd_arm>;
	163	};
	164
fe2c89af BG	165	&i2c1 {
	166	status = "okay";
	167	clock-frequency = <400000>;
	168
4721ab85 HS	169	rtc@51 {
	170	compatible = "haoyu,hym8563";
	171	reg = <0x51>;
	172	interrupt-parent = <&gpio0>;
	173	interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
	174	pinctrl-names = "default";
	175	pinctrl-0 = <&rtc_int>;
	176	#clock-cells = <0>;
	177	clock-output-names = "xin32k";
	178	};
	179
fe2c89af BG	180	act8846: act8846@5a {
	181	compatible = "active-semi,act8846";
	182	reg = <0x5a>;
	183	status = "okay";
9ab79be0	184	system-power-controller;
fe2c89af BG	185
	186	pinctrl-names = "default";
	187	pinctrl-0 = <&act8846_dvs0_ctl>;
	188
776920e1 HS	189	vp1-supply = <&vsys>;
	190	vp2-supply = <&vsys>;
	191	vp3-supply = <&vsys>;
	192	vp4-supply = <&vsys>;
	193	inl1-supply = <&vcc_io>;
	194	inl2-supply = <&vsys>;
	195	inl3-supply = <&vsys>;
	196
fe2c89af BG	197	regulators {
	198	vcc_ddr: REG1 {
	199	regulator-name = "VCC_DDR";
	200	regulator-min-microvolt = <1200000>;
	201	regulator-max-microvolt = <1200000>;
	202	regulator-always-on;
	203	};
	204
	205	vdd_log: REG2 {
	206	regulator-name = "VDD_LOG";
	207	regulator-min-microvolt = <1000000>;
	208	regulator-max-microvolt = <1000000>;
	209	regulator-always-on;
	210	};
	211
	212	vdd_arm: REG3 {
	213	regulator-name = "VDD_ARM";
	214	regulator-min-microvolt = <875000>;
3adb1327	215	regulator-max-microvolt = <1350000>;
fe2c89af BG	216	regulator-always-on;
	217	};
	218
	219	vcc_io: REG4 {
	220	regulator-name = "VCC_IO";
	221	regulator-min-microvolt = <3300000>;
	222	regulator-max-microvolt = <3300000>;
	223	regulator-always-on;
	224	};
	225
	226	vdd_10: REG5 {
	227	regulator-name = "VDD_10";
	228	regulator-min-microvolt = <1000000>;
	229	regulator-max-microvolt = <1000000>;
	230	regulator-always-on;
	231	};
	232
	233	vdd_hdmi: REG6 {
	234	regulator-name = "VDD_HDMI";
	235	regulator-min-microvolt = <2500000>;
	236	regulator-max-microvolt = <2500000>;
	237	regulator-always-on;
	238	};
	239
	240	vcc18: REG7 {
	241	regulator-name = "VCC_18";
	242	regulator-min-microvolt = <1800000>;
	243	regulator-max-microvolt = <1800000>;
	244	regulator-always-on;
	245	};
	246
	247	vcca_33: REG8 {
	248	regulator-name = "VCCA_33";
	249	regulator-min-microvolt = <3300000>;
	250	regulator-max-microvolt = <3300000>;
	251	regulator-always-on;
	252	};
	253
	254	vcc_rmii: REG9 {
	255	regulator-name = "VCC_RMII";
	256	regulator-min-microvolt = <3300000>;
	257	regulator-max-microvolt = <3300000>;
fe2c89af BG	258	};
	259
	260	vccio_wl: REG10 {
	261	regulator-name = "VCCIO_WL";
	262	regulator-min-microvolt = <3300000>;
	263	regulator-max-microvolt = <3300000>;
	264	regulator-always-on;
	265	};
	266
	267	vcc_18: REG11 {
	268	regulator-name = "VCC18_IO";
	269	regulator-min-microvolt = <1800000>;
	270	regulator-max-microvolt = <1800000>;
	271	regulator-always-on;
	272	};
	273
	274	vcc28: REG12 {
	275	regulator-name = "VCC_28";
	276	regulator-min-microvolt = <2800000>;
	277	regulator-max-microvolt = <2800000>;
	278	regulator-always-on;
	279	};
	280	};
	281	};
	282	};
	283
b09e35a3 HS	284	&mmc0 {
	285	num-slots = <1>;
	286	status = "okay";
1302d32c HS	287	pinctrl-names = "default";
1302d32c HS	288	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
b09e35a3 HS	289	vmmc-supply = <&vcc_sd0>;
b09e35a3 HS	290
356649ab JC	291	bus-width = <4>;
356649ab JC	292	disable-wp;
b09e35a3 HS	293	};
b09e35a3 HS	294
efb66e93 JC	295	&pwm1 {
	296	status = "okay";
	297	};
	298
	299	&pwm2 {
	300	status = "okay";
	301	};
	302
	303	&pwm3 {
	304	status = "okay";
	305	};
	306
fe2c89af BG	307	&pinctrl {
	308	pcfg_output_low: pcfg-output-low {
	309	output-low;
	310	};
	311
	312	act8846 {
	313	act8846_dvs0_ctl: act8846-dvs0-ctl {
	314	rockchip,pins = <RK_GPIO3 27 RK_FUNC_GPIO &pcfg_output_low>;
	315	};
	316	};
08567053	317
4721ab85 HS	318	hym8563 {
	319	rtc_int: rtc-int {
	320	rockchip,pins = <RK_GPIO0 0 RK_FUNC_GPIO &pcfg_pull_up>;
	321	};
	322	};
	323
c6ec956b RP	324	lan8720a {
	325	phy_int: phy-int {
	326	rockchip,pins = <RK_GPIO3 26 RK_FUNC_GPIO &pcfg_pull_up>;
	327	};
	328	};
	329
08567053 BG	330	ir-receiver {
	331	ir_recv_pin: ir-recv-pin {
	332	rockchip,pins = <RK_GPIO0 10 RK_FUNC_GPIO &pcfg_pull_none>;
	333	};
	334	};
f1c8547f HS	335
	336	usb {
	337	host_vbus_drv: host-vbus-drv {
	338	rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>;
	339	};
	340	otg_vbus_drv: otg-vbus-drv {
	341	rockchip,pins = <2 31 RK_FUNC_GPIO &pcfg_pull_none>;
	342	};
	343	};
fe2c89af BG	344	};
fe2c89af BG	345
fcbbf965 HS	346	&uart0 {
	347	status = "okay";
	348	};
	349
	350	&uart1 {
	351	status = "okay";
	352	};
	353
	354	&uart2 {
fcbbf965 HS	355	status = "okay";
	356	};
	357
	358	&uart3 {
	359	status = "okay";
	360	};
eb2b9d47	361
f1c8547f HS	362	&usb_host {
	363	status = "okay";
	364	};
	365
	366	&usb_otg {
	367	status = "okay";
	368	};
	369
eb2b9d47 HS	370	&wdt {
	371	status = "okay";
	372	};