ARM: dts: rockchip: move the hdmi ddc-i2c-bus property to the actual boards
[deliverable/linux.git] / arch / arm / boot / dts / rk3288-evb.dtsi
CommitLineData
6ce0562a
HS
1/*
2 * This program is free software; you can redistribute it and/or modify
3 * it under the terms of the GNU General Public License as published by
4 * the Free Software Foundation; either version 2 of the License, or
5 * (at your option) any later version.
6 *
7 * This program is distributed in the hope that it will be useful,
8 * but WITHOUT ANY WARRANTY; without even the implied warranty of
9 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
10 * GNU General Public License for more details.
11 */
12
0541f94f 13#include <dt-bindings/pwm/pwm.h>
6ce0562a
HS
14#include "rk3288.dtsi"
15
16/ {
17 memory {
18 reg = <0x0 0x80000000>;
19 };
20
0541f94f
DA
21 backlight {
22 compatible = "pwm-backlight";
23 brightness-levels = <
24 0 1 2 3 4 5 6 7
25 8 9 10 11 12 13 14 15
26 16 17 18 19 20 21 22 23
27 24 25 26 27 28 29 30 31
28 32 33 34 35 36 37 38 39
29 40 41 42 43 44 45 46 47
30 48 49 50 51 52 53 54 55
31 56 57 58 59 60 61 62 63
32 64 65 66 67 68 69 70 71
33 72 73 74 75 76 77 78 79
34 80 81 82 83 84 85 86 87
35 88 89 90 91 92 93 94 95
36 96 97 98 99 100 101 102 103
37 104 105 106 107 108 109 110 111
38 112 113 114 115 116 117 118 119
39 120 121 122 123 124 125 126 127
40 128 129 130 131 132 133 134 135
41 136 137 138 139 140 141 142 143
42 144 145 146 147 148 149 150 151
43 152 153 154 155 156 157 158 159
44 160 161 162 163 164 165 166 167
45 168 169 170 171 172 173 174 175
46 176 177 178 179 180 181 182 183
47 184 185 186 187 188 189 190 191
48 192 193 194 195 196 197 198 199
49 200 201 202 203 204 205 206 207
50 208 209 210 211 212 213 214 215
51 216 217 218 219 220 221 222 223
52 224 225 226 227 228 229 230 231
53 232 233 234 235 236 237 238 239
54 240 241 242 243 244 245 246 247
55 248 249 250 251 252 253 254 255>;
56 default-brightness-level = <128>;
57 enable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
58 pinctrl-names = "default";
59 pinctrl-0 = <&bl_en>;
60 pwms = <&pwm0 0 1000000 PWM_POLARITY_INVERTED>;
61 };
62
6ce0562a
HS
63 gpio-keys {
64 compatible = "gpio-keys";
65 #address-cells = <1>;
66 #size-cells = <0>;
67 autorepeat;
68
69 pinctrl-names = "default";
70 pinctrl-0 = <&pwrbtn>;
71
72 button@0 {
73 gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
74 linux,code = <116>;
75 label = "GPIO Key Power";
76 linux,input-type = <1>;
77 gpio-key,wakeup = <1>;
78 debounce-interval = <100>;
79 };
80 };
83a742b4
DA
81
82 /* This turns on USB vbus for both host0 (ehci) and host1 (dwc2) */
83 vcc_host: vcc-host-regulator {
84 compatible = "regulator-fixed";
85 enable-active-high;
86 gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
87 pinctrl-names = "default";
88 pinctrl-0 = <&host_vbus_drv>;
89 regulator-name = "vcc_host";
90 regulator-always-on;
91 regulator-boot-on;
92 };
6ce0562a
HS
93};
94
2c31d949
DA
95&emmc {
96 broken-cd;
97 bus-width = <8>;
98 cap-mmc-highspeed;
99 disable-wp;
100 non-removable;
101 num-slots = <1>;
102 pinctrl-names = "default";
103 pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
104 status = "okay";
105};
106
863b76b2 107&hdmi {
c25d8cbc 108 ddc-i2c-bus = <&i2c5>;
863b76b2
HS
109 status = "okay";
110};
111
2c31d949
DA
112&sdmmc {
113 bus-width = <4>;
114 cap-mmc-highspeed;
115 cap-sd-highspeed;
116 card-detect-delay = <200>;
117 disable-wp; /* wp not hooked up */
118 num-slots = <1>;
119 pinctrl-names = "default";
120 pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
121 status = "okay";
122};
123
6ce0562a
HS
124&i2c0 {
125 status = "okay";
126};
127
863b76b2
HS
128&i2c5 {
129 status = "okay";
130};
131
6ce0562a
HS
132&wdt {
133 status = "okay";
134};
135
0541f94f
DA
136&pwm0 {
137 status = "okay";
138};
139
6ce0562a
HS
140&uart0 {
141 status = "okay";
142};
143
144&uart1 {
145 status = "okay";
146};
147
148&uart2 {
149 status = "okay";
150};
151
152&uart3 {
153 status = "okay";
154};
155
156&uart4 {
157 status = "okay";
158};
159
ff9d0ecb
CW
160&tsadc {
161 rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
162 rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
163 status = "okay";
164};
165
6ce0562a 166&pinctrl {
0541f94f
DA
167 backlight {
168 bl_en: bl-en {
169 rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
170 };
171 };
172
6ce0562a
HS
173 buttons {
174 pwrbtn: pwrbtn {
175 rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
176 };
177 };
83a742b4 178
91ff8cd8
DA
179 pmic {
180 pmic_int: pmic-int {
181 rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
182 };
183 };
184
83a742b4
DA
185 usb {
186 host_vbus_drv: host-vbus-drv {
187 rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
188 };
189 };
6ce0562a 190};
163cb917
DA
191
192&usb_host0_ehci {
193 status = "okay";
194};
ddf8303f
KY
195
196&usb_host1 {
197 status = "okay";
198};
863b76b2
HS
199
200&vopb {
201 status = "okay";
202};
203
204&vopb_mmu {
205 status = "okay";
206};
207
208&vopl {
209 status = "okay";
210};
211
212&vopl_mmu {
213 status = "okay";
214};
This page took 0.0563 seconds and 5 git commands to generate.