Commit | Line | Data |
---|---|---|
6e81fadb FN |
1 | /* |
2 | * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@gmail.com> | |
3 | * | |
4 | * This file is dual-licensed: you can use it either under the terms | |
5 | * of the GPL or the X11 license, at your option. Note that this dual | |
6 | * licensing only applies to this file, and not this project as a | |
7 | * whole. | |
8 | * | |
9 | * a) This file is free software; you can redistribute it and/or | |
10 | * modify it under the terms of the GNU General Public License as | |
11 | * published by the Free Software Foundation; either version 2 of the | |
12 | * License, or (at your option) any later version. | |
13 | * | |
14 | * This file is distributed in the hope that it will be useful, | |
15 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
17 | * GNU General Public License for more details. | |
18 | * | |
19 | * Or, alternatively, | |
20 | * | |
21 | * b) Permission is hereby granted, free of charge, to any person | |
22 | * obtaining a copy of this software and associated documentation | |
23 | * files (the "Software"), to deal in the Software without | |
24 | * restriction, including without limitation the rights to use, | |
25 | * copy, modify, merge, publish, distribute, sublicense, and/or | |
26 | * sell copies of the Software, and to permit persons to whom the | |
27 | * Software is furnished to do so, subject to the following | |
28 | * conditions: | |
29 | * | |
30 | * The above copyright notice and this permission notice shall be | |
31 | * included in all copies or substantial portions of the Software. | |
32 | * | |
33 | * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, | |
34 | * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES | |
35 | * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND | |
36 | * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT | |
37 | * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, | |
38 | * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING | |
39 | * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR | |
40 | * OTHER DEALINGS IN THE SOFTWARE. | |
41 | */ | |
42 | ||
8b30c899 | 43 | #include <dt-bindings/input/input.h> |
6e81fadb FN |
44 | #include "rk3288.dtsi" |
45 | ||
46 | / { | |
47 | memory { | |
6158e6d0 | 48 | device_type = "memory"; |
6e81fadb FN |
49 | reg = <0 0x80000000>; |
50 | }; | |
51 | ||
4490dc5c HS |
52 | dovdd_1v8: dovdd-1v8-regulator { |
53 | compatible = "regulator-fixed"; | |
54 | regulator-name = "dovdd_1v8"; | |
55 | regulator-min-microvolt = <1800000>; | |
56 | regulator-max-microvolt = <1800000>; | |
57 | vin-supply = <&vcc28_dvp>; | |
58 | }; | |
59 | ||
6e81fadb FN |
60 | ext_gmac: external-gmac-clock { |
61 | compatible = "fixed-clock"; | |
62 | #clock-cells = <0>; | |
63 | clock-frequency = <125000000>; | |
64 | clock-output-names = "ext_gmac"; | |
65 | }; | |
66 | ||
4490dc5c HS |
67 | io_domains: io-domains { |
68 | compatible = "rockchip,rk3288-io-voltage-domain"; | |
69 | rockchip,grf = <&grf>; | |
70 | ||
71 | audio-supply = <&vcca_33>; | |
72 | bb-supply = <&vcc_io>; | |
73 | dvp-supply = <&dovdd_1v8>; | |
74 | flash0-supply = <&vcc_flash>; | |
75 | flash1-supply = <&vcc_lan>; | |
76 | gpio30-supply = <&vcc_io>; | |
77 | gpio1830-supply = <&vcc_io>; | |
78 | lcdc-supply = <&vcc_io>; | |
79 | sdcard-supply = <&vccio_sd>; | |
80 | wifi-supply = <&vccio_wl>; | |
81 | }; | |
82 | ||
6e81fadb FN |
83 | ir: ir-receiver { |
84 | compatible = "gpio-ir-receiver"; | |
85 | pinctrl-names = "default"; | |
86 | pinctrl-0 = <&ir_int>; | |
87 | }; | |
88 | ||
89 | keys: gpio-keys { | |
90 | compatible = "gpio-keys"; | |
6e81fadb | 91 | |
8b30c899 | 92 | power { |
4f66f247 | 93 | wakeup-source; |
6e81fadb FN |
94 | gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; |
95 | label = "GPIO Power"; | |
8b30c899 | 96 | linux,code = <KEY_POWER>; |
6e81fadb FN |
97 | pinctrl-names = "default"; |
98 | pinctrl-0 = <&pwr_key>; | |
99 | }; | |
100 | }; | |
101 | ||
102 | leds { | |
103 | compatible = "gpio-leds"; | |
104 | ||
105 | work { | |
106 | gpios = <&gpio8 1 GPIO_ACTIVE_LOW>; | |
107 | label = "firefly:blue:user"; | |
108 | linux,default-trigger = "rc-feedback"; | |
109 | pinctrl-names = "default"; | |
110 | pinctrl-0 = <&work_led>; | |
111 | }; | |
112 | ||
113 | power { | |
114 | gpios = <&gpio8 2 GPIO_ACTIVE_LOW>; | |
115 | label = "firefly:green:power"; | |
116 | linux,default-trigger = "default-on"; | |
117 | pinctrl-names = "default"; | |
118 | pinctrl-0 = <&power_led>; | |
119 | }; | |
120 | }; | |
121 | ||
fae3b811 | 122 | vbat_wl: vcc_sys: vsys-regulator { |
6e81fadb FN |
123 | compatible = "regulator-fixed"; |
124 | regulator-name = "vcc_sys"; | |
125 | regulator-min-microvolt = <5000000>; | |
126 | regulator-max-microvolt = <5000000>; | |
127 | regulator-always-on; | |
128 | regulator-boot-on; | |
129 | }; | |
130 | ||
131 | vcc_sd: sdmmc-regulator { | |
132 | compatible = "regulator-fixed"; | |
133 | gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; | |
134 | pinctrl-names = "default"; | |
135 | pinctrl-0 = <&sdmmc_pwr>; | |
136 | regulator-name = "vcc_sd"; | |
137 | regulator-min-microvolt = <3300000>; | |
138 | regulator-max-microvolt = <3300000>; | |
139 | startup-delay-us = <100000>; | |
140 | vin-supply = <&vcc_io>; | |
141 | }; | |
142 | ||
143 | vcc_flash: flash-regulator { | |
144 | compatible = "regulator-fixed"; | |
145 | regulator-name = "vcc_flash"; | |
146 | regulator-min-microvolt = <1800000>; | |
147 | regulator-max-microvolt = <1800000>; | |
148 | vin-supply = <&vcc_io>; | |
149 | }; | |
150 | ||
151 | vcc_5v: usb-regulator { | |
152 | compatible = "regulator-fixed"; | |
153 | regulator-name = "vcc_5v"; | |
154 | regulator-min-microvolt = <5000000>; | |
155 | regulator-max-microvolt = <5000000>; | |
156 | regulator-always-on; | |
157 | regulator-boot-on; | |
158 | vin-supply = <&vcc_sys>; | |
159 | }; | |
160 | ||
161 | vcc_host_5v: usb-host-regulator { | |
162 | compatible = "regulator-fixed"; | |
163 | enable-active-high; | |
164 | gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; | |
165 | pinctrl-names = "default"; | |
166 | pinctrl-0 = <&host_vbus_drv>; | |
167 | regulator-name = "vcc_host_5v"; | |
168 | regulator-min-microvolt = <5000000>; | |
169 | regulator-max-microvolt = <5000000>; | |
170 | regulator-always-on; | |
171 | vin-supply = <&vcc_5v>; | |
172 | }; | |
173 | ||
174 | vcc_otg_5v: usb-otg-regulator { | |
175 | compatible = "regulator-fixed"; | |
176 | enable-active-high; | |
177 | gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; | |
178 | pinctrl-names = "default"; | |
179 | pinctrl-0 = <&otg_vbus_drv>; | |
180 | regulator-name = "vcc_otg_5v"; | |
181 | regulator-min-microvolt = <5000000>; | |
182 | regulator-max-microvolt = <5000000>; | |
183 | regulator-always-on; | |
184 | vin-supply = <&vcc_5v>; | |
185 | }; | |
4490dc5c HS |
186 | |
187 | /* | |
188 | * A TT8142 creates both dovdd_1v8 and vcc28_dvp, controlled | |
189 | * by the dvp_pwr pin. | |
190 | */ | |
191 | vcc28_dvp: vcc28-dvp-regulator { | |
192 | compatible = "regulator-fixed"; | |
193 | enable-active-high; | |
194 | gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>; | |
195 | pinctrl-names = "default"; | |
196 | pinctrl-0 = <&dvp_pwr>; | |
197 | regulator-name = "vcc28_dvp"; | |
198 | regulator-min-microvolt = <2800000>; | |
199 | regulator-max-microvolt = <2800000>; | |
200 | regulator-always-on; | |
201 | vin-supply = <&vcc_io>; | |
202 | }; | |
6e81fadb FN |
203 | }; |
204 | ||
205 | &cpu0 { | |
206 | cpu0-supply = <&vdd_cpu>; | |
207 | }; | |
208 | ||
209 | &emmc { | |
6e81fadb FN |
210 | bus-width = <8>; |
211 | cap-mmc-highspeed; | |
212 | disable-wp; | |
213 | non-removable; | |
214 | num-slots = <1>; | |
215 | pinctrl-names = "default"; | |
216 | pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>; | |
217 | vmmc-supply = <&vcc_io>; | |
218 | vqmmc-supply = <&vcc_flash>; | |
219 | status = "okay"; | |
220 | }; | |
221 | ||
f36abc86 HS |
222 | &gmac { |
223 | assigned-clocks = <&cru SCLK_MAC>; | |
224 | assigned-clock-parents = <&ext_gmac>; | |
225 | clock_in_out = "input"; | |
226 | pinctrl-names = "default"; | |
227 | pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>; | |
228 | phy-supply = <&vcc_lan>; | |
229 | phy-mode = "rgmii"; | |
230 | snps,reset-active-low; | |
231 | snps,reset-delays-us = <0 10000 1000000>; | |
232 | snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>; | |
233 | tx_delay = <0x30>; | |
234 | rx_delay = <0x10>; | |
235 | status = "ok"; | |
236 | }; | |
237 | ||
863b76b2 | 238 | &hdmi { |
c25d8cbc | 239 | ddc-i2c-bus = <&i2c5>; |
863b76b2 HS |
240 | status = "okay"; |
241 | }; | |
242 | ||
6e81fadb FN |
243 | &i2c0 { |
244 | clock-frequency = <400000>; | |
245 | status = "okay"; | |
246 | ||
247 | vdd_cpu: syr827@40 { | |
248 | compatible = "silergy,syr827"; | |
249 | fcs,suspend-voltage-selector = <1>; | |
250 | reg = <0x40>; | |
251 | regulator-name = "vdd_cpu"; | |
252 | regulator-min-microvolt = <850000>; | |
253 | regulator-max-microvolt = <1350000>; | |
254 | regulator-always-on; | |
255 | regulator-boot-on; | |
270c7b18 RP |
256 | regulator-enable-ramp-delay = <300>; |
257 | regulator-ramp-delay = <8000>; | |
6e81fadb FN |
258 | vin-supply = <&vcc_sys>; |
259 | }; | |
260 | ||
261 | vdd_gpu: syr828@41 { | |
262 | compatible = "silergy,syr828"; | |
263 | fcs,suspend-voltage-selector = <1>; | |
264 | reg = <0x41>; | |
265 | regulator-name = "vdd_gpu"; | |
266 | regulator-min-microvolt = <850000>; | |
267 | regulator-max-microvolt = <1350000>; | |
268 | regulator-always-on; | |
269 | vin-supply = <&vcc_sys>; | |
270 | }; | |
271 | ||
272 | hym8563: hym8563@51 { | |
273 | compatible = "haoyu,hym8563"; | |
274 | reg = <0x51>; | |
275 | #clock-cells = <0>; | |
276 | clock-frequency = <32768>; | |
277 | clock-output-names = "xin32k"; | |
278 | interrupt-parent = <&gpio7>; | |
279 | interrupts = <4 IRQ_TYPE_EDGE_FALLING>; | |
280 | pinctrl-names = "default"; | |
281 | pinctrl-0 = <&rtc_int>; | |
282 | }; | |
283 | ||
284 | act8846: act8846@5a { | |
285 | compatible = "active-semi,act8846"; | |
286 | reg = <0x5a>; | |
287 | pinctrl-names = "default"; | |
288 | pinctrl-0 = <&pmic_vsel>, <&pwr_hold>; | |
289 | system-power-controller; | |
290 | ||
71126029 HS |
291 | vp1-supply = <&vcc_sys>; |
292 | vp2-supply = <&vcc_sys>; | |
293 | vp3-supply = <&vcc_sys>; | |
294 | vp4-supply = <&vcc_sys>; | |
295 | inl1-supply = <&vcc_sys>; | |
296 | inl2-supply = <&vcc_sys>; | |
297 | inl3-supply = <&vcc_20>; | |
298 | ||
6e81fadb FN |
299 | regulators { |
300 | vcc_ddr: REG1 { | |
301 | regulator-name = "vcc_ddr"; | |
302 | regulator-min-microvolt = <1200000>; | |
303 | regulator-max-microvolt = <1200000>; | |
304 | regulator-always-on; | |
305 | }; | |
306 | ||
307 | vcc_io: REG2 { | |
308 | regulator-name = "vcc_io"; | |
309 | regulator-min-microvolt = <3300000>; | |
310 | regulator-max-microvolt = <3300000>; | |
311 | regulator-always-on; | |
312 | }; | |
313 | ||
314 | vdd_log: REG3 { | |
315 | regulator-name = "vdd_log"; | |
316 | regulator-min-microvolt = <1100000>; | |
317 | regulator-max-microvolt = <1100000>; | |
318 | regulator-always-on; | |
319 | }; | |
320 | ||
321 | vcc_20: REG4 { | |
322 | regulator-name = "vcc_20"; | |
323 | regulator-min-microvolt = <2000000>; | |
324 | regulator-max-microvolt = <2000000>; | |
325 | regulator-always-on; | |
326 | }; | |
327 | ||
328 | vccio_sd: REG5 { | |
329 | regulator-name = "vccio_sd"; | |
330 | regulator-min-microvolt = <3300000>; | |
331 | regulator-max-microvolt = <3300000>; | |
332 | regulator-always-on; | |
333 | }; | |
334 | ||
335 | vdd10_lcd: REG6 { | |
336 | regulator-name = "vdd10_lcd"; | |
337 | regulator-min-microvolt = <1000000>; | |
338 | regulator-max-microvolt = <1000000>; | |
863b76b2 | 339 | regulator-always-on; |
6e81fadb FN |
340 | }; |
341 | ||
342 | vcca_18: REG7 { | |
343 | regulator-name = "vcca_18"; | |
344 | regulator-min-microvolt = <1800000>; | |
345 | regulator-max-microvolt = <1800000>; | |
346 | }; | |
347 | ||
348 | vcca_33: REG8 { | |
349 | regulator-name = "vcca_33"; | |
350 | regulator-min-microvolt = <3300000>; | |
351 | regulator-max-microvolt = <3300000>; | |
352 | }; | |
353 | ||
354 | vcc_lan: REG9 { | |
355 | regulator-name = "vcc_lan"; | |
356 | regulator-min-microvolt = <3300000>; | |
357 | regulator-max-microvolt = <3300000>; | |
358 | }; | |
359 | ||
360 | vdd_10: REG10 { | |
361 | regulator-name = "vdd_10"; | |
362 | regulator-min-microvolt = <1000000>; | |
363 | regulator-max-microvolt = <1000000>; | |
364 | regulator-always-on; | |
365 | }; | |
366 | ||
fae3b811 | 367 | vccio_wl: vcc_18: REG11 { |
6e81fadb FN |
368 | regulator-name = "vcc_18"; |
369 | regulator-min-microvolt = <1800000>; | |
370 | regulator-max-microvolt = <1800000>; | |
371 | regulator-always-on; | |
372 | }; | |
373 | ||
374 | vcc18_lcd: REG12 { | |
375 | regulator-name = "vcc18_lcd"; | |
376 | regulator-min-microvolt = <1800000>; | |
377 | regulator-max-microvolt = <1800000>; | |
863b76b2 | 378 | regulator-always-on; |
6e81fadb FN |
379 | }; |
380 | }; | |
381 | }; | |
382 | }; | |
383 | ||
384 | &i2c1 { | |
385 | status = "okay"; | |
386 | }; | |
387 | ||
388 | &i2c2 { | |
389 | status = "okay"; | |
390 | }; | |
391 | ||
392 | &i2c4 { | |
393 | status = "okay"; | |
394 | }; | |
395 | ||
396 | &i2c5 { | |
397 | status = "okay"; | |
398 | }; | |
399 | ||
400 | &pinctrl { | |
401 | pcfg_output_high: pcfg-output-high { | |
402 | output-high; | |
403 | }; | |
404 | ||
405 | pcfg_output_low: pcfg-output-low { | |
406 | output-low; | |
407 | }; | |
408 | ||
296759c9 WE |
409 | pcfg_pull_up_drv_12ma: pcfg-pull-up-drv-12ma { |
410 | bias-pull-up; | |
411 | drive-strength = <12>; | |
412 | }; | |
413 | ||
6e81fadb FN |
414 | act8846 { |
415 | pwr_hold: pwr-hold { | |
416 | rockchip,pins = <0 1 RK_FUNC_GPIO &pcfg_output_high>; | |
417 | }; | |
418 | }; | |
419 | ||
4490dc5c HS |
420 | dvp { |
421 | dvp_pwr: dvp-pwr { | |
422 | rockchip,pins = <0 11 RK_FUNC_GPIO &pcfg_pull_none>; | |
423 | }; | |
424 | }; | |
425 | ||
6e81fadb FN |
426 | gmac { |
427 | phy_int: phy-int { | |
428 | rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>; | |
429 | }; | |
430 | ||
431 | phy_pmeb: phy-pmeb { | |
432 | rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>; | |
433 | }; | |
434 | ||
435 | phy_rst: phy-rst { | |
436 | rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>; | |
437 | }; | |
438 | }; | |
439 | ||
440 | hym8563 { | |
441 | rtc_int: rtc-int { | |
442 | rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_up>; | |
443 | }; | |
444 | }; | |
445 | ||
446 | keys { | |
447 | pwr_key: pwr-key { | |
448 | rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; | |
449 | }; | |
450 | }; | |
451 | ||
452 | leds { | |
453 | power_led: power-led { | |
454 | rockchip,pins = <8 2 RK_FUNC_GPIO &pcfg_pull_none>; | |
455 | }; | |
456 | ||
457 | work_led: work-led { | |
458 | rockchip,pins = <8 1 RK_FUNC_GPIO &pcfg_pull_none>; | |
459 | }; | |
460 | }; | |
461 | ||
462 | sdmmc { | |
296759c9 WE |
463 | /* |
464 | * Default drive strength isn't enough to achieve even | |
465 | * high-speed mode on firefly board so bump up to 12ma. | |
466 | */ | |
467 | sdmmc_bus4: sdmmc-bus4 { | |
468 | rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, | |
469 | <6 17 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, | |
470 | <6 18 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, | |
471 | <6 19 RK_FUNC_1 &pcfg_pull_up_drv_12ma>; | |
472 | }; | |
473 | ||
474 | sdmmc_clk: sdmmc-clk { | |
475 | rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_12ma>; | |
476 | }; | |
477 | ||
478 | sdmmc_cmd: sdmmc-cmd { | |
479 | rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_12ma>; | |
480 | }; | |
481 | ||
6e81fadb FN |
482 | sdmmc_pwr: sdmmc-pwr { |
483 | rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; | |
484 | }; | |
485 | }; | |
486 | ||
487 | usb_host { | |
488 | host_vbus_drv: host-vbus-drv { | |
489 | rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; | |
490 | }; | |
491 | ||
492 | usbhub_rst: usbhub-rst { | |
493 | rockchip,pins = <8 3 RK_FUNC_GPIO &pcfg_output_high>; | |
494 | }; | |
495 | }; | |
496 | ||
497 | usb_otg { | |
498 | otg_vbus_drv: otg-vbus-drv { | |
499 | rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>; | |
500 | }; | |
501 | }; | |
502 | }; | |
503 | ||
504 | &saradc { | |
505 | vref-supply = <&vcc_18>; | |
506 | status = "okay"; | |
507 | }; | |
508 | ||
509 | &sdio0 { | |
6e81fadb FN |
510 | bus-width = <4>; |
511 | disable-wp; | |
512 | non-removable; | |
513 | num-slots = <1>; | |
514 | pinctrl-names = "default"; | |
515 | pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>; | |
fae3b811 HS |
516 | vmmc-supply = <&vbat_wl>; |
517 | vqmmc-supply = <&vccio_wl>; | |
6e81fadb FN |
518 | status = "okay"; |
519 | }; | |
520 | ||
521 | &sdmmc { | |
522 | bus-width = <4>; | |
523 | cap-mmc-highspeed; | |
524 | cap-sd-highspeed; | |
525 | card-detect-delay = <200>; | |
526 | disable-wp; | |
527 | num-slots = <1>; | |
528 | pinctrl-names = "default"; | |
529 | pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>; | |
530 | vmmc-supply = <&vcc_sd>; | |
fae3b811 | 531 | vqmmc-supply = <&vccio_sd>; |
6e81fadb FN |
532 | status = "okay"; |
533 | }; | |
534 | ||
535 | &spi0 { | |
536 | pinctrl-names = "default"; | |
537 | pinctrl-0 = <&spi0_clk>, <&spi0_cs0>, <&spi0_tx>, <&spi0_rx>, <&spi0_cs1>; | |
538 | status = "okay"; | |
539 | }; | |
540 | ||
8c653f9a HS |
541 | &tsadc { |
542 | rockchip,hw-tshut-mode = <0>; | |
543 | rockchip,hw-tshut-polarity = <0>; | |
544 | status = "okay"; | |
545 | }; | |
546 | ||
6e81fadb FN |
547 | &uart0 { |
548 | pinctrl-names = "default"; | |
549 | pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>; | |
550 | status = "okay"; | |
551 | }; | |
552 | ||
553 | &uart1 { | |
554 | status = "okay"; | |
555 | }; | |
556 | ||
557 | &uart2 { | |
558 | status = "okay"; | |
559 | }; | |
560 | ||
561 | &uart3 { | |
562 | status = "okay"; | |
563 | }; | |
564 | ||
055b0c67 HS |
565 | &usbphy { |
566 | status = "okay"; | |
567 | }; | |
568 | ||
6e81fadb FN |
569 | &usb_host1 { |
570 | pinctrl-names = "default"; | |
571 | pinctrl-0 = <&usbhub_rst>; | |
572 | status = "okay"; | |
573 | }; | |
574 | ||
575 | &usb_otg { | |
576 | status = "okay"; | |
577 | }; | |
578 | ||
863b76b2 HS |
579 | &vopb { |
580 | status = "okay"; | |
581 | }; | |
582 | ||
583 | &vopb_mmu { | |
584 | status = "okay"; | |
585 | }; | |
586 | ||
587 | &vopl { | |
588 | status = "okay"; | |
589 | }; | |
590 | ||
591 | &vopl_mmu { | |
592 | status = "okay"; | |
593 | }; | |
594 | ||
6e81fadb FN |
595 | &wdt { |
596 | status = "okay"; | |
597 | }; |