Commit | Line | Data |
---|---|---|
44d5039a SS |
1 | /* |
2 | * This file is dual-licensed: you can use it either under the terms | |
3 | * of the GPL or the X11 license, at your option. Note that this dual | |
4 | * licensing only applies to this file, and not this project as a | |
5 | * whole. | |
6 | * | |
7 | * a) This file is free software; you can redistribute it and/or | |
8 | * modify it under the terms of the GNU General Public License as | |
9 | * published by the Free Software Foundation; either version 2 of the | |
10 | * License, or (at your option) any later version. | |
11 | * | |
12 | * This file is distributed in the hope that it will be useful, | |
13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
15 | * GNU General Public License for more details. | |
16 | * | |
17 | * Or, alternatively, | |
18 | * | |
19 | * b) Permission is hereby granted, free of charge, to any person | |
20 | * obtaining a copy of this software and associated documentation | |
21 | * files (the "Software"), to deal in the Software without | |
22 | * restriction, including without limitation the rights to use, | |
23 | * copy, modify, merge, publish, distribute, sublicense, and/or | |
24 | * sell copies of the Software, and to permit persons to whom the | |
25 | * Software is furnished to do so, subject to the following | |
26 | * conditions: | |
27 | * | |
28 | * The above copyright notice and this permission notice shall be | |
29 | * included in all copies or substantial portions of the Software. | |
30 | * | |
31 | * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, | |
32 | * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES | |
33 | * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND | |
34 | * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT | |
35 | * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, | |
36 | * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING | |
37 | * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR | |
38 | * OTHER DEALINGS IN THE SOFTWARE. | |
39 | */ | |
40 | ||
41 | #include <dt-bindings/pwm/pwm.h> | |
42 | #include "rk3288.dtsi" | |
43 | ||
44 | / { | |
45 | memory { | |
46 | reg = <0x0 0x80000000>; | |
47 | device_type = "memory"; | |
48 | }; | |
49 | ||
50 | emmc_pwrseq: emmc-pwrseq { | |
51 | compatible = "mmc-pwrseq-emmc"; | |
52 | pinctrl-0 = <&emmc_reset>; | |
53 | pinctrl-names = "default"; | |
54 | reset-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>; | |
55 | }; | |
56 | ||
57 | ext_gmac: external-gmac-clock { | |
58 | compatible = "fixed-clock"; | |
59 | #clock-cells = <0>; | |
60 | clock-frequency = <125000000>; | |
61 | clock-output-names = "ext_gmac"; | |
62 | }; | |
63 | ||
64 | vcc_sys: vsys-regulator { | |
65 | compatible = "regulator-fixed"; | |
66 | regulator-name = "vcc_sys"; | |
67 | regulator-min-microvolt = <5000000>; | |
68 | regulator-max-microvolt = <5000000>; | |
69 | regulator-always-on; | |
70 | regulator-boot-on; | |
71 | }; | |
72 | }; | |
73 | ||
74 | &cpu0 { | |
75 | cpu0-supply = <&vdd_cpu>; | |
76 | }; | |
77 | ||
78 | &emmc { | |
79 | bus-width = <8>; | |
80 | cap-mmc-highspeed; | |
81 | disable-wp; | |
82 | non-removable; | |
83 | num-slots = <1>; | |
84 | mmc-pwrseq = <&emmc_pwrseq>; | |
85 | pinctrl-names = "default"; | |
86 | pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; | |
87 | vmmc-supply = <&vcc_io>; | |
88 | status = "okay"; | |
89 | }; | |
90 | ||
91 | &gmac { | |
92 | assigned-clocks = <&cru SCLK_MAC>; | |
93 | assigned-clock-parents = <&ext_gmac>; | |
94 | clock_in_out = "input"; | |
95 | phy-mode = "rgmii"; | |
96 | phy-supply = <&vccio_pmu>; | |
97 | pinctrl-names = "default"; | |
98 | pinctrl-0 = <&rgmii_pins &phy_rst>; | |
99 | snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>; | |
100 | snps,reset-active-low; | |
101 | snps,reset-delays-us = <0 10000 30000>; | |
102 | rx_delay = <0x10>; | |
103 | tx_delay = <0x30>; | |
104 | }; | |
105 | ||
106 | &i2c0 { | |
107 | status = "okay"; | |
108 | ||
109 | act8846: act8846@5a { | |
110 | compatible = "active-semi,act8846"; | |
111 | reg = <0x5a>; | |
112 | inl1-supply = <&vcc_io>; | |
113 | inl2-supply = <&vcc_sys>; | |
114 | inl3-supply = <&vcc_20>; | |
115 | vp1-supply = <&vcc_sys>; | |
116 | vp2-supply = <&vcc_sys>; | |
117 | vp3-supply = <&vcc_sys>; | |
118 | vp4-supply = <&vcc_sys>; | |
119 | ||
120 | regulators { | |
121 | vcc_ddr: REG1 { | |
122 | regulator-name = "VCC_DDR"; | |
123 | regulator-min-microvolt = <1200000>; | |
124 | regulator-max-microvolt = <1200000>; | |
125 | regulator-always-on; | |
126 | }; | |
127 | ||
128 | vcc_io: REG2 { | |
129 | regulator-name = "VCC_IO"; | |
130 | regulator-min-microvolt = <3300000>; | |
131 | regulator-max-microvolt = <3300000>; | |
132 | regulator-always-on; | |
133 | }; | |
134 | ||
135 | vdd_log: REG3 { | |
136 | regulator-name = "VDD_LOG"; | |
137 | regulator-min-microvolt = <1000000>; | |
138 | regulator-max-microvolt = <1000000>; | |
139 | regulator-always-on; | |
140 | }; | |
141 | ||
142 | vcc_20: REG4 { | |
143 | regulator-name = "VCC_20"; | |
144 | regulator-min-microvolt = <2000000>; | |
145 | regulator-max-microvolt = <2000000>; | |
146 | regulator-always-on; | |
147 | }; | |
148 | ||
149 | vccio_sd: REG5 { | |
150 | regulator-name = "VCCIO_SD"; | |
151 | regulator-min-microvolt = <3300000>; | |
152 | regulator-max-microvolt = <3300000>; | |
153 | regulator-always-on; | |
154 | }; | |
155 | ||
156 | vdd10_lcd: REG6 { | |
157 | regulator-name = "VDD10_LCD"; | |
158 | regulator-min-microvolt = <1000000>; | |
159 | regulator-max-microvolt = <1000000>; | |
160 | regulator-always-on; | |
161 | }; | |
162 | ||
163 | vcca_codec: REG7 { | |
164 | regulator-name = "VCCA_CODEC"; | |
165 | regulator-min-microvolt = <3300000>; | |
166 | regulator-max-microvolt = <3300000>; | |
167 | regulator-always-on; | |
168 | }; | |
169 | ||
170 | vcca_tp: REG8 { | |
171 | regulator-name = "VCCA_TP"; | |
172 | regulator-min-microvolt = <3300000>; | |
173 | regulator-max-microvolt = <3300000>; | |
174 | regulator-always-on; | |
175 | }; | |
176 | ||
177 | vccio_pmu: REG9 { | |
178 | regulator-name = "VCCIO_PMU"; | |
179 | regulator-min-microvolt = <3300000>; | |
180 | regulator-max-microvolt = <3300000>; | |
181 | regulator-always-on; | |
182 | }; | |
183 | ||
184 | vdd_10: REG10 { | |
185 | regulator-name = "VDD_10"; | |
186 | regulator-min-microvolt = <1000000>; | |
187 | regulator-max-microvolt = <1000000>; | |
188 | regulator-always-on; | |
189 | }; | |
190 | ||
191 | vcc_18: REG11 { | |
192 | regulator-name = "VCC_18"; | |
193 | regulator-min-microvolt = <1800000>; | |
194 | regulator-max-microvolt = <1800000>; | |
195 | regulator-always-on; | |
196 | }; | |
197 | ||
198 | vcc18_lcd: REG12 { | |
199 | regulator-name = "VCC18_LCD"; | |
200 | regulator-min-microvolt = <1800000>; | |
201 | regulator-max-microvolt = <1800000>; | |
202 | regulator-always-on; | |
203 | }; | |
204 | }; | |
205 | }; | |
206 | ||
207 | vdd_cpu: syr827@40 { | |
208 | compatible = "silergy,syr827"; | |
209 | reg = <0x40>; | |
210 | fcs,suspend-voltage-selector = <1>; | |
211 | regulator-always-on; | |
212 | regulator-boot-on; | |
213 | regulator-enable-ramp-delay = <300>; | |
214 | regulator-name = "vdd_cpu"; | |
215 | regulator-min-microvolt = <850000>; | |
216 | regulator-max-microvolt = <1350000>; | |
217 | regulator-ramp-delay = <8000>; | |
218 | vin-supply = <&vcc_sys>; | |
219 | }; | |
220 | ||
221 | vdd_gpu: syr828@41 { | |
222 | compatible = "silergy,syr828"; | |
223 | reg = <0x41>; | |
224 | fcs,suspend-voltage-selector = <1>; | |
225 | regulator-always-on; | |
226 | regulator-enable-ramp-delay = <300>; | |
227 | regulator-min-microvolt = <850000>; | |
228 | regulator-max-microvolt = <1350000>; | |
229 | regulator-name = "vdd_gpu"; | |
230 | regulator-ramp-delay = <8000>; | |
231 | vin-supply = <&vcc_sys>; | |
232 | }; | |
233 | }; | |
234 | ||
235 | &pinctrl { | |
236 | pcfg_output_high: pcfg-output-high { | |
237 | output-high; | |
238 | }; | |
239 | ||
240 | emmc { | |
241 | emmc_reset: emmc-reset { | |
242 | rockchip,pins = <3 9 RK_FUNC_GPIO &pcfg_pull_none>; | |
243 | }; | |
244 | }; | |
245 | ||
246 | gmac { | |
247 | phy_rst: phy-rst { | |
248 | rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>; | |
249 | }; | |
250 | }; | |
251 | }; | |
252 | ||
253 | &tsadc { | |
254 | rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */ | |
255 | rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */ | |
256 | status = "okay"; | |
257 | }; | |
258 | ||
259 | &vopb { | |
260 | status = "okay"; | |
261 | }; | |
262 | ||
263 | &vopb_mmu { | |
264 | status = "okay"; | |
265 | }; | |
266 | ||
267 | &vopl { | |
268 | status = "okay"; | |
269 | }; | |
270 | ||
271 | &vopl_mmu { | |
272 | status = "okay"; | |
273 | }; | |
274 | ||
275 | &wdt { | |
276 | status = "okay"; | |
277 | }; |