[deliverable/linux.git] / arch / arm / boot / dts / sh73a0-kzm9g-reference.dts

/*
 * Device Tree Source for the KZM-A9-GT board
 *
 * Copyright (C) 2012 Horms Solutions Ltd.
 *
 * Based on sh73a0-kzm9g.dts
 * Copyright (C) 2012 Renesas Solutions Corp.
 *
 * This file is licensed under the terms of the GNU General Public License
 * version 2.  This program is licensed "as is" without any warranty of any
 * kind, whether express or implied.
 */

/dts-v1/;
#include "sh73a0.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>

/ {
	model = "KZM-A9-GT";
	compatible = "renesas,kzm9g-reference", "renesas,sh73a0";

	aliases {
		serial4 = &scifa4;
	};

	cpus {
		cpu@0 {
			cpu0-supply = <&vdd_dvfs>;
			operating-points = <
				/* kHz  uV */
				1196000 1315000
				 598000 1175000
				 398667 1065000
			>;
			voltage-tolerance = <1>; /* 1% */
		};
	};

	chosen {
		bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel rw";
		stdout-path = &scifa4;
	};

	memory {
		device_type = "memory";
		reg = <0x41000000 0x1e800000>;
	};

	reg_1p8v: regulator@0 {
		compatible = "regulator-fixed";
		regulator-name = "fixed-1.8V";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		regulator-always-on;
		regulator-boot-on;
	};

	reg_3p3v: regulator@1 {
		compatible = "regulator-fixed";
		regulator-name = "fixed-3.3V";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		regulator-always-on;
		regulator-boot-on;
	};

	vmmc_sdhi0: regulator@2 {
		compatible = "regulator-fixed";
		regulator-name = "SDHI0 Vcc";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		gpio = <&pfc 15 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};

	vmmc_sdhi2: regulator@3 {
		compatible = "regulator-fixed";
		regulator-name = "SDHI2 Vcc";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		gpio = <&pfc 14 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};

	lan9220@10000000 {
		compatible = "smsc,lan9220", "smsc,lan9115";
		reg = <0x10000000 0x100>;
		phy-mode = "mii";
		interrupt-parent = <&irqpin0>;
		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
		reg-io-width = <4>;
		smsc,irq-push-pull;
		smsc,save-mac-address;
		vddvario-supply = <&reg_1p8v>;
		vdd33a-supply = <&reg_3p3v>;
	};

	leds {
		compatible = "gpio-leds";
		led1 {
			gpios = <&pfc 20 GPIO_ACTIVE_LOW>;
			label = "LED1";
		};
		led2 {
			gpios = <&pfc 21 GPIO_ACTIVE_LOW>;
			label = "LED2";
		};
		led3 {
			gpios = <&pfc 22 GPIO_ACTIVE_LOW>;
			label = "LED3";
		};
		led4 {
			gpios = <&pfc 23 GPIO_ACTIVE_LOW>;
			label = "LED4";
		};
	};

	keyboard {
		compatible = "gpio-keys";

		back-key {
			gpios = <&pcf8575 8 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_BACK>;
			label = "SW3";
		};

		right-key {
			gpios = <&pcf8575 9 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RIGHT>;
			label = "SW2-R";
		};

		left-key {
			gpios = <&pcf8575 10 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_LEFT>;
			label = "SW2-L";
		};

		enter-key {
			gpios = <&pcf8575 11 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_ENTER>;
			label = "SW2-P";
		};

		up-key {
			gpios = <&pcf8575 12 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_UP>;
			label = "SW2-U";
		};

		down-key {
			gpios = <&pcf8575 13 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_DOWN>;
			label = "SW2-D";
		};

		home-key {
			gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_HOME>;
			label = "SW1";
		};
	};

	sound {
		compatible = "simple-audio-card";
		simple-audio-card,format = "left_j";
		simple-audio-card,cpu {
			sound-dai = <&sh_fsi2 0>;
		};
		simple-audio-card,codec {
			sound-dai = <&ak4648>;
			bitclock-master;
			frame-master;
			system-clock-frequency = <11289600>;
		};
	};
};

&cmt1 {
	status = "okay";
};

&i2c0 {
	status = "okay";
	as3711@40 {
		compatible = "ams,as3711";
		reg = <0x40>;

		regulators {
			vdd_dvfs: sd1 {
				regulator-name = "1.315V CPU";
				regulator-min-microvolt = <1050000>;
				regulator-max-microvolt = <1350000>;
				regulator-always-on;
				regulator-boot-on;
			};
			sd2 {
				regulator-name = "1.8V";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-always-on;
				regulator-boot-on;
			};
			sd4 {
				regulator-name = "1.215V";
				regulator-min-microvolt = <1215000>;
				regulator-max-microvolt = <1235000>;
				regulator-always-on;
				regulator-boot-on;
			};
			ldo2 {
				regulator-name = "2.8V CPU";
				regulator-min-microvolt = <2800000>;
				regulator-max-microvolt = <2800000>;
				regulator-always-on;
				regulator-boot-on;
			};
			ldo3 {
				regulator-name = "3.0V CPU";
				regulator-min-microvolt = <3000000>;
				regulator-max-microvolt = <3000000>;
				regulator-always-on;
				regulator-boot-on;
			};
			ldo4 {
				regulator-name = "2.8V";
				regulator-min-microvolt = <2800000>;
				regulator-max-microvolt = <2800000>;
				regulator-always-on;
				regulator-boot-on;
			};
			ldo5 {
				regulator-name = "2.8V #2";
				regulator-min-microvolt = <2800000>;
				regulator-max-microvolt = <2800000>;
				regulator-always-on;
				regulator-boot-on;
			};
			ldo7 {
				regulator-name = "1.15V CPU";
				regulator-min-microvolt = <1150000>;
				regulator-max-microvolt = <1150000>;
				regulator-always-on;
				regulator-boot-on;
			};
			ldo8 {
				regulator-name = "1.15V CPU #2";
				regulator-min-microvolt = <1150000>;
				regulator-max-microvolt = <1150000>;
				regulator-always-on;
				regulator-boot-on;
			};
		};
	};

	ak4648: ak4648@12 {
		#sound-dai-cells = <0>;
		compatible = "asahi-kasei,ak4648";
		reg = <0x12>;
	};
};

&i2c3 {
	pinctrl-0 = <&i2c3_pins>;
	pinctrl-names = "default";
	status = "okay";

	pcf8575: gpio@20 {
		compatible = "nxp,pcf8575";
		reg = <0x20>;
		interrupt-parent = <&irqpin2>;
		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
		gpio-controller;
		#gpio-cells = <2>;
		interrupt-controller;
		#interrupt-cells = <2>;
	};
};

&mmcif {
	pinctrl-0 = <&mmcif_pins>;
	pinctrl-names = "default";

	bus-width = <8>;
	vmmc-supply = <&reg_1p8v>;
	status = "okay";
};

&pfc {
	i2c3_pins: i2c3 {
		renesas,groups = "i2c3_1";
		renesas,function = "i2c3";
	};

	mmcif_pins: mmc {
		mux {
			renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0";
			renesas,function = "mmc0";
		};
		cfg {
			renesas,groups = "mmc0_data8_0";
			renesas,pins = "PORT279";
			bias-pull-up;
		};
	};

	scifa4_pins: serial4 {
		renesas,groups = "scifa4_data", "scifa4_ctrl";
		renesas,function = "scifa4";
	};

	sdhi0_pins: sd0 {
		renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp";
		renesas,function = "sdhi0";
	};

	sdhi2_pins: sd2 {
		renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
		renesas,function = "sdhi2";
	};

	fsia_pins: sounda {
		renesas,groups = "fsia_mclk_in", "fsia_sclk_in",
				 "fsia_data_in", "fsia_data_out";
		renesas,function = "fsia";
	};
};

&scifa4 {
	pinctrl-0 = <&scifa4_pins>;
	pinctrl-names = "default";

	status = "okay";
};

&sdhi0 {
	pinctrl-0 = <&sdhi0_pins>;
	pinctrl-names = "default";

	vmmc-supply = <&vmmc_sdhi0>;
	bus-width = <4>;
	status = "okay";
};

&sdhi2 {
	pinctrl-0 = <&sdhi2_pins>;
	pinctrl-names = "default";

	vmmc-supply = <&vmmc_sdhi2>;
	bus-width = <4>;
	broken-cd;
	status = "okay";
};

&sh_fsi2 {
	pinctrl-0 = <&fsia_pins>;
	pinctrl-names = "default";

	status = "okay";
};
Commit	Line	Data
b8b82b29 SH	1	/*
	2	* Device Tree Source for the KZM-A9-GT board
	3	*
	4	* Copyright (C) 2012 Horms Solutions Ltd.
	5	*
	6	* Based on sh73a0-kzm9g.dts
	7	* Copyright (C) 2012 Renesas Solutions Corp.
	8	*
	9	* This file is licensed under the terms of the GNU General Public License
	10	* version 2. This program is licensed "as is" without any warranty of any
	11	* kind, whether express or implied.
	12	*/
	13
	14	/dts-v1/;
31c46cbf	15	#include "sh73a0.dtsi"
f8f77ce9	16	#include <dt-bindings/gpio/gpio.h>
39f01630	17	#include <dt-bindings/input/input.h>
77e2d7e2	18	#include <dt-bindings/interrupt-controller/irq.h>
b8b82b29 SH	19
	20	/ {
	21	model = "KZM-A9-GT";
	22	compatible = "renesas,kzm9g-reference", "renesas,sh73a0";
	23
700ce7c2 SH	24	aliases {
	25	serial4 = &scifa4;
	26	};
	27
251ed173 GL	28	cpus {
	29	cpu@0 {
	30	cpu0-supply = <&vdd_dvfs>;
	31	operating-points = <
	32	/* kHz uV */
	33	1196000 1315000
	34	598000 1175000
	35	398667 1065000
	36	>;
	37	voltage-tolerance = <1>; /* 1% */
	38	};
	39	};
	40
b8b82b29	41	chosen {
0b732470	42	bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel rw";
59ab5bff	43	stdout-path = &scifa4;
b8b82b29 SH	44	};
	45
	46	memory {
	47	device_type = "memory";
	48	reg = <0x41000000 0x1e800000>;
	49	};
	50
f017d011	51	reg_1p8v: regulator@0 {
b8b82b29 SH	52	compatible = "regulator-fixed";
	53	regulator-name = "fixed-1.8V";
	54	regulator-min-microvolt = <1800000>;
	55	regulator-max-microvolt = <1800000>;
f017d011 GL	56	regulator-always-on;
	57	regulator-boot-on;
	58	};
	59
c791c036	60	reg_3p3v: regulator@1 {
f017d011	61	compatible = "regulator-fixed";
c791c036 GL	62	regulator-name = "fixed-3.3V";
	63	regulator-min-microvolt = <3300000>;
	64	regulator-max-microvolt = <3300000>;
f017d011 GL	65	regulator-always-on;
	66	regulator-boot-on;
	67	};
8c1de8ee	68
f8f77ce9	69	vmmc_sdhi0: regulator@2 {
40c488df	70	compatible = "regulator-fixed";
f8f77ce9 LP	71	regulator-name = "SDHI0 Vcc";
	72	regulator-min-microvolt = <3300000>;
	73	regulator-max-microvolt = <3300000>;
	74	gpio = <&pfc 15 GPIO_ACTIVE_HIGH>;
	75	enable-active-high;
	76	};
	77
	78	vmmc_sdhi2: regulator@3 {
40c488df	79	compatible = "regulator-fixed";
f8f77ce9 LP	80	regulator-name = "SDHI2 Vcc";
	81	regulator-min-microvolt = <3300000>;
	82	regulator-max-microvolt = <3300000>;
	83	gpio = <&pfc 14 GPIO_ACTIVE_HIGH>;
	84	enable-active-high;
	85	};
	86
8c1de8ee GL	87	lan9220@10000000 {
	88	compatible = "smsc,lan9220", "smsc,lan9115";
	89	reg = <0x10000000 0x100>;
	90	phy-mode = "mii";
	91	interrupt-parent = <&irqpin0>;
72e14c05	92	interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
8c1de8ee GL	93	reg-io-width = <4>;
	94	smsc,irq-push-pull;
	95	smsc,save-mac-address;
	96	vddvario-supply = <&reg_1p8v>;
	97	vdd33a-supply = <&reg_3p3v>;
	98	};
14692739 LP	99
	100	leds {
	101	compatible = "gpio-leds";
	102	led1 {
	103	gpios = <&pfc 20 GPIO_ACTIVE_LOW>;
8ee63b3a	104	label = "LED1";
14692739 LP	105	};
	106	led2 {
	107	gpios = <&pfc 21 GPIO_ACTIVE_LOW>;
8ee63b3a	108	label = "LED2";
14692739 LP	109	};
	110	led3 {
	111	gpios = <&pfc 22 GPIO_ACTIVE_LOW>;
8ee63b3a	112	label = "LED3";
14692739 LP	113	};
	114	led4 {
	115	gpios = <&pfc 23 GPIO_ACTIVE_LOW>;
8ee63b3a	116	label = "LED4";
14692739 LP	117	};
14692739 LP	118	};
5ec5f734	119
61f1fb47	120	keyboard {
5ec5f734 LP	121	compatible = "gpio-keys";
	122
	123	back-key {
	124	gpios = <&pcf8575 8 GPIO_ACTIVE_LOW>;
39f01630	125	linux,code = <KEY_BACK>;
5ec5f734 LP	126	label = "SW3";
	127	};
	128
	129	right-key {
	130	gpios = <&pcf8575 9 GPIO_ACTIVE_LOW>;
39f01630	131	linux,code = <KEY_RIGHT>;
5ec5f734 LP	132	label = "SW2-R";
	133	};
	134
	135	left-key {
	136	gpios = <&pcf8575 10 GPIO_ACTIVE_LOW>;
39f01630	137	linux,code = <KEY_LEFT>;
5ec5f734 LP	138	label = "SW2-L";
	139	};
	140
	141	enter-key {
	142	gpios = <&pcf8575 11 GPIO_ACTIVE_LOW>;
39f01630	143	linux,code = <KEY_ENTER>;
5ec5f734 LP	144	label = "SW2-P";
	145	};
	146
	147	up-key {
	148	gpios = <&pcf8575 12 GPIO_ACTIVE_LOW>;
39f01630	149	linux,code = <KEY_UP>;
5ec5f734 LP	150	label = "SW2-U";
	151	};
	152
	153	down-key {
	154	gpios = <&pcf8575 13 GPIO_ACTIVE_LOW>;
39f01630	155	linux,code = <KEY_DOWN>;
5ec5f734 LP	156	label = "SW2-D";
	157	};
	158
	159	home-key {
	160	gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>;
39f01630	161	linux,code = <KEY_HOME>;
5ec5f734 LP	162	label = "SW1";
	163	};
	164	};
3c2a87c8 KM	165
	166	sound {
	167	compatible = "simple-audio-card";
	168	simple-audio-card,format = "left_j";
	169	simple-audio-card,cpu {
	170	sound-dai = <&sh_fsi2 0>;
	171	};
	172	simple-audio-card,codec {
	173	sound-dai = <&ak4648>;
	174	bitclock-master;
	175	frame-master;
	176	system-clock-frequency = <11289600>;
	177	};
	178	};
b8b82b29 SH	179	};
b8b82b29 SH	180
48a0d1e0	181	&cmt1 {
338d1f0b	182	status = "okay";
48a0d1e0 UH	183	};
48a0d1e0 UH	184
251ed173	185	&i2c0 {
eda3a4fa	186	status = "okay";
251ed173 GL	187	as3711@40 {
	188	compatible = "ams,as3711";
	189	reg = <0x40>;
	190
	191	regulators {
	192	vdd_dvfs: sd1 {
	193	regulator-name = "1.315V CPU";
	194	regulator-min-microvolt = <1050000>;
	195	regulator-max-microvolt = <1350000>;
	196	regulator-always-on;
	197	regulator-boot-on;
	198	};
	199	sd2 {
	200	regulator-name = "1.8V";
	201	regulator-min-microvolt = <1800000>;
	202	regulator-max-microvolt = <1800000>;
	203	regulator-always-on;
	204	regulator-boot-on;
	205	};
	206	sd4 {
	207	regulator-name = "1.215V";
	208	regulator-min-microvolt = <1215000>;
	209	regulator-max-microvolt = <1235000>;
	210	regulator-always-on;
	211	regulator-boot-on;
	212	};
	213	ldo2 {
	214	regulator-name = "2.8V CPU";
	215	regulator-min-microvolt = <2800000>;
	216	regulator-max-microvolt = <2800000>;
	217	regulator-always-on;
	218	regulator-boot-on;
	219	};
	220	ldo3 {
	221	regulator-name = "3.0V CPU";
	222	regulator-min-microvolt = <3000000>;
	223	regulator-max-microvolt = <3000000>;
	224	regulator-always-on;
	225	regulator-boot-on;
	226	};
	227	ldo4 {
	228	regulator-name = "2.8V";
	229	regulator-min-microvolt = <2800000>;
	230	regulator-max-microvolt = <2800000>;
	231	regulator-always-on;
	232	regulator-boot-on;
	233	};
	234	ldo5 {
	235	regulator-name = "2.8V #2";
	236	regulator-min-microvolt = <2800000>;
	237	regulator-max-microvolt = <2800000>;
	238	regulator-always-on;
	239	regulator-boot-on;
	240	};
	241	ldo7 {
	242	regulator-name = "1.15V CPU";
	243	regulator-min-microvolt = <1150000>;
	244	regulator-max-microvolt = <1150000>;
	245	regulator-always-on;
	246	regulator-boot-on;
	247	};
	248	ldo8 {
	249	regulator-name = "1.15V CPU #2";
	250	regulator-min-microvolt = <1150000>;
251	regulator-max-microvolt = <1150000>;
252	regulator-always-on;
253	regulator-boot-on;
254	};
255	};
256	};
3c2a87c8	257
76ddbdc3	258	ak4648: ak4648@12 {
3c2a87c8 KM	259	#sound-dai-cells = <0>;
	260	compatible = "asahi-kasei,ak4648";
	261	reg = <0x12>;
	262	};
251ed173 GL	263	};
251ed173 GL	264
ec028600 LP	265	&i2c3 {
	266	pinctrl-0 = <&i2c3_pins>;
	267	pinctrl-names = "default";
eda3a4fa	268	status = "okay";
a40d9ad3 LP	269
	270	pcf8575: gpio@20 {
	271	compatible = "nxp,pcf8575";
	272	reg = <0x20>;
	273	interrupt-parent = <&irqpin2>;
	274	interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
	275	gpio-controller;
	276	#gpio-cells = <2>;
	277	interrupt-controller;
	278	#interrupt-cells = <2>;
	279	};
ec028600 LP	280	};
ec028600 LP	281
b8b82b29	282	&mmcif {
ec028600 LP	283	pinctrl-0 = <&mmcif_pins>;
	284	pinctrl-names = "default";
	285
f017d011 GL	286	bus-width = <8>;
f017d011 GL	287	vmmc-supply = <&reg_1p8v>;
546e5d3e GL	288	status = "okay";
	289	};
	290
ec028600	291	&pfc {
ec028600 LP	292	i2c3_pins: i2c3 {
	293	renesas,groups = "i2c3_1";
	294	renesas,function = "i2c3";
	295	};
	296
26adf1a7	297	mmcif_pins: mmc {
ec028600 LP	298	mux {
	299	renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0";
	300	renesas,function = "mmc0";
	301	};
	302	cfg {
	303	renesas,groups = "mmc0_data8_0";
	304	renesas,pins = "PORT279";
	305	bias-pull-up;
	306	};
	307	};
	308
26adf1a7	309	scifa4_pins: serial4 {
ec028600 LP	310	renesas,groups = "scifa4_data", "scifa4_ctrl";
	311	renesas,function = "scifa4";
	312	};
	313
26adf1a7	314	sdhi0_pins: sd0 {
ec028600 LP	315	renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp";
	316	renesas,function = "sdhi0";
	317	};
	318
26adf1a7	319	sdhi2_pins: sd2 {
ec028600 LP	320	renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
	321	renesas,function = "sdhi2";
	322	};
3c2a87c8 KM	323
	324	fsia_pins: sounda {
	325	renesas,groups = "fsia_mclk_in", "fsia_sclk_in",
	326	"fsia_data_in", "fsia_data_out";
	327	renesas,function = "fsia";
	328	};
ec028600 LP	329	};
ec028600 LP	330
700ce7c2 SH	331	&scifa4 {
	332	pinctrl-0 = <&scifa4_pins>;
	333	pinctrl-names = "default";
	334
	335	status = "okay";
	336	};
	337
546e5d3e	338	&sdhi0 {
ec028600 LP	339	pinctrl-0 = <&sdhi0_pins>;
	340	pinctrl-names = "default";
	341
f8f77ce9	342	vmmc-supply = <&vmmc_sdhi0>;
546e5d3e GL	343	bus-width = <4>;
	344	status = "okay";
	345	};
	346
	347	&sdhi2 {
ec028600 LP	348	pinctrl-0 = <&sdhi2_pins>;
	349	pinctrl-names = "default";
	350
f8f77ce9	351	vmmc-supply = <&vmmc_sdhi2>;
546e5d3e GL	352	bus-width = <4>;
	353	broken-cd;
	354	status = "okay";
b8b82b29	355	};
3c2a87c8 KM	356
	357	&sh_fsi2 {
	358	pinctrl-0 = <&fsia_pins>;
	359	pinctrl-names = "default";
	360
	361	status = "okay";
	362	};