[deliverable/linux.git] / arch / arm / boot / dts / sh73a0-kzm9g.dts

/*
 * Device Tree Source for the KZM-A9-GT board
 *
 * Copyright (C) 2012 Horms Solutions Ltd.
 *
 * Based on sh73a0-kzm9g.dts
 * Copyright (C) 2012 Renesas Solutions Corp.
 *
 * This file is licensed under the terms of the GNU General Public License
 * version 2.  This program is licensed "as is" without any warranty of any
 * kind, whether express or implied.
 */

/dts-v1/;
#include "sh73a0.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>

/ {
	model = "KZM-A9-GT";
	compatible = "renesas,kzm9g", "renesas,sh73a0";

	aliases {
		serial4 = &scifa4;
	};

	cpus {
		cpu@0 {
			cpu0-supply = <&vdd_dvfs>;
			operating-points = <
				/* kHz  uV */
				1196000 1315000
				 598000 1175000
				 398667 1065000
			>;
			voltage-tolerance = <1>; /* 1% */
		};
	};

	chosen {
		bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel rw";
		stdout-path = &scifa4;
	};

	memory {
		device_type = "memory";
		reg = <0x40000000 0x20000000>;
	};

	reg_1p8v: regulator@0 {
		compatible = "regulator-fixed";
		regulator-name = "fixed-1.8V";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		regulator-always-on;
		regulator-boot-on;
	};

	reg_3p3v: regulator@1 {
		compatible = "regulator-fixed";
		regulator-name = "fixed-3.3V";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		regulator-always-on;
		regulator-boot-on;
	};

	vmmc_sdhi0: regulator@2 {
		compatible = "regulator-fixed";
		regulator-name = "SDHI0 Vcc";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		gpio = <&pfc 15 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};

	vmmc_sdhi2: regulator@3 {
		compatible = "regulator-fixed";
		regulator-name = "SDHI2 Vcc";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		gpio = <&pfc 14 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};

	leds {
		compatible = "gpio-leds";
		led1 {
			gpios = <&pfc 20 GPIO_ACTIVE_LOW>;
			label = "LED1";
		};
		led2 {
			gpios = <&pfc 21 GPIO_ACTIVE_LOW>;
			label = "LED2";
		};
		led3 {
			gpios = <&pfc 22 GPIO_ACTIVE_LOW>;
			label = "LED3";
		};
		led4 {
			gpios = <&pfc 23 GPIO_ACTIVE_LOW>;
			label = "LED4";
		};
	};

	keyboard {
		compatible = "gpio-keys";

		back-key {
			gpios = <&pcf8575 8 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_BACK>;
			label = "SW3";
		};

		right-key {
			gpios = <&pcf8575 9 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RIGHT>;
			label = "SW2-R";
		};

		left-key {
			gpios = <&pcf8575 10 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_LEFT>;
			label = "SW2-L";
		};

		enter-key {
			gpios = <&pcf8575 11 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_ENTER>;
			label = "SW2-P";
		};

		up-key {
			gpios = <&pcf8575 12 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_UP>;
			label = "SW2-U";
		};

		down-key {
			gpios = <&pcf8575 13 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_DOWN>;
			label = "SW2-D";
		};

		home-key {
			gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_HOME>;
			label = "SW1";
		};
	};

	sound {
		compatible = "simple-audio-card";
		simple-audio-card,format = "left_j";
		simple-audio-card,cpu {
			sound-dai = <&sh_fsi2 0>;
		};
		simple-audio-card,codec {
			sound-dai = <&ak4648>;
			bitclock-master;
			frame-master;
			system-clock-frequency = <11289600>;
		};
	};
};

&bsc {
	ethernet@10000000 {
		compatible = "smsc,lan9220", "smsc,lan9115";
		reg = <0x10000000 0x100>;
		phy-mode = "mii";
		interrupt-parent = <&irqpin0>;
		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
		reg-io-width = <4>;
		smsc,irq-push-pull;
		smsc,save-mac-address;
		vddvario-supply = <&reg_1p8v>;
		vdd33a-supply = <&reg_3p3v>;
	};
};

&cmt1 {
	status = "okay";
};

&extal2_clk {
	clock-frequency = <48000000>;
};

&i2c0 {
	status = "okay";

	compass@c {
		compatible = "asahi-kasei,ak8975";
		reg = <0x0c>;
		interrupt-parent = <&irqpin3>;
		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
	};

	ak4648: codec@12 {
		compatible = "asahi-kasei,ak4648";
		reg = <0x12>;
		#sound-dai-cells = <0>;
	};

	accelerometer@1d {
		compatible = "adi,adxl34x";
		reg = <0x1d>;
		interrupt-parent = <&irqpin3>;
		interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
			     <3 IRQ_TYPE_LEVEL_HIGH>;
	};

	rtc@32 {
		compatible = "ricoh,r2025sd";
		reg = <0x32>;
	};

	as3711@40 {
		compatible = "ams,as3711";
		reg = <0x40>;

		regulators {
			vdd_dvfs: sd1 {
				regulator-name = "1.315V CPU";
				regulator-min-microvolt = <1050000>;
				regulator-max-microvolt = <1350000>;
				regulator-always-on;
				regulator-boot-on;
			};
			sd2 {
				regulator-name = "1.8V";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-always-on;
				regulator-boot-on;
			};
			sd4 {
				regulator-name = "1.215V";
				regulator-min-microvolt = <1215000>;
				regulator-max-microvolt = <1235000>;
				regulator-always-on;
				regulator-boot-on;
			};
			ldo2 {
				regulator-name = "2.8V CPU";
				regulator-min-microvolt = <2800000>;
				regulator-max-microvolt = <2800000>;
				regulator-always-on;
				regulator-boot-on;
			};
			ldo3 {
				regulator-name = "3.0V CPU";
				regulator-min-microvolt = <3000000>;
				regulator-max-microvolt = <3000000>;
				regulator-always-on;
				regulator-boot-on;
			};
			ldo4 {
				regulator-name = "2.8V";
				regulator-min-microvolt = <2800000>;
				regulator-max-microvolt = <2800000>;
				regulator-always-on;
				regulator-boot-on;
			};
			ldo5 {
				regulator-name = "2.8V #2";
				regulator-min-microvolt = <2800000>;
				regulator-max-microvolt = <2800000>;
				regulator-always-on;
				regulator-boot-on;
			};
			ldo7 {
				regulator-name = "1.15V CPU";
				regulator-min-microvolt = <1150000>;
				regulator-max-microvolt = <1150000>;
				regulator-always-on;
				regulator-boot-on;
			};
			ldo8 {
				regulator-name = "1.15V CPU #2";
				regulator-min-microvolt = <1150000>;
				regulator-max-microvolt = <1150000>;
				regulator-always-on;
				regulator-boot-on;
			};
		};
	};
};

&i2c1 {
	status = "okay";

	touchscreen@55 {
		compatible = "sitronix,st1232";
		reg = <0x55>;
		interrupt-parent = <&irqpin1>;
		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
	};
};

&i2c3 {
	pinctrl-0 = <&i2c3_pins>;
	pinctrl-names = "default";
	status = "okay";

	pcf8575: gpio@20 {
		compatible = "nxp,pcf8575";
		reg = <0x20>;
		interrupt-parent = <&irqpin2>;
		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
		gpio-controller;
		#gpio-cells = <2>;
		interrupt-controller;
		#interrupt-cells = <2>;
	};
};

&mmcif {
	pinctrl-0 = <&mmcif_pins>;
	pinctrl-names = "default";

	bus-width = <8>;
	vmmc-supply = <&reg_1p8v>;
	status = "okay";
};

&pfc {
	i2c3_pins: i2c3 {
		renesas,groups = "i2c3_1";
		renesas,function = "i2c3";
	};

	mmcif_pins: mmc {
		mux {
			renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0";
			renesas,function = "mmc0";
		};
		cfg {
			renesas,groups = "mmc0_data8_0";
			renesas,pins = "PORT279";
			bias-pull-up;
		};
	};

	scifa4_pins: serial4 {
		renesas,groups = "scifa4_data", "scifa4_ctrl";
		renesas,function = "scifa4";
	};

	sdhi0_pins: sd0 {
		renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp";
		renesas,function = "sdhi0";
	};

	sdhi2_pins: sd2 {
		renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
		renesas,function = "sdhi2";
	};

	fsia_pins: sounda {
		renesas,groups = "fsia_mclk_in", "fsia_sclk_in",
				 "fsia_data_in", "fsia_data_out";
		renesas,function = "fsia";
	};
};

&scifa4 {
	pinctrl-0 = <&scifa4_pins>;
	pinctrl-names = "default";

	status = "okay";
};

&sdhi0 {
	pinctrl-0 = <&sdhi0_pins>;
	pinctrl-names = "default";

	vmmc-supply = <&vmmc_sdhi0>;
	bus-width = <4>;
	status = "okay";
};

&sdhi2 {
	pinctrl-0 = <&sdhi2_pins>;
	pinctrl-names = "default";

	vmmc-supply = <&vmmc_sdhi2>;
	bus-width = <4>;
	broken-cd;
	status = "okay";
};

&sh_fsi2 {
	pinctrl-0 = <&fsia_pins>;
	pinctrl-names = "default";

	status = "okay";
};
Commit	Line	Data
7296d932 MD	1	/*
	2	* Device Tree Source for the KZM-A9-GT board
	3	*
682d2dfb MD	4	* Copyright (C) 2012 Horms Solutions Ltd.
	5	*
	6	* Based on sh73a0-kzm9g.dts
7296d932 MD	7	* Copyright (C) 2012 Renesas Solutions Corp.
	8	*
	9	* This file is licensed under the terms of the GNU General Public License
	10	* version 2. This program is licensed "as is" without any warranty of any
	11	* kind, whether express or implied.
	12	*/
	13
	14	/dts-v1/;
31c46cbf	15	#include "sh73a0.dtsi"
682d2dfb MD	16	#include <dt-bindings/gpio/gpio.h>
	17	#include <dt-bindings/input/input.h>
	18	#include <dt-bindings/interrupt-controller/irq.h>
7296d932 MD	19
	20	/ {
	21	model = "KZM-A9-GT";
9601e873	22	compatible = "renesas,kzm9g", "renesas,sh73a0";
7296d932	23
682d2dfb MD	24	aliases {
	25	serial4 = &scifa4;
	26	};
	27
	28	cpus {
	29	cpu@0 {
	30	cpu0-supply = <&vdd_dvfs>;
	31	operating-points = <
	32	/* kHz uV */
	33	1196000 1315000
	34	598000 1175000
	35	398667 1065000
	36	>;
	37	voltage-tolerance = <1>; /* 1% */
	38	};
	39	};
	40
be919006	41	chosen {
682d2dfb MD	42	bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel rw";
682d2dfb MD	43	stdout-path = &scifa4;
be919006 SH	44	};
be919006 SH	45
7296d932 MD	46	memory {
7296d932 MD	47	device_type = "memory";
89ebd545	48	reg = <0x40000000 0x20000000>;
7296d932	49	};
682d2dfb MD	50
	51	reg_1p8v: regulator@0 {
	52	compatible = "regulator-fixed";
	53	regulator-name = "fixed-1.8V";
	54	regulator-min-microvolt = <1800000>;
	55	regulator-max-microvolt = <1800000>;
	56	regulator-always-on;
	57	regulator-boot-on;
	58	};
	59
	60	reg_3p3v: regulator@1 {
	61	compatible = "regulator-fixed";
	62	regulator-name = "fixed-3.3V";
	63	regulator-min-microvolt = <3300000>;
	64	regulator-max-microvolt = <3300000>;
	65	regulator-always-on;
	66	regulator-boot-on;
	67	};
	68
	69	vmmc_sdhi0: regulator@2 {
	70	compatible = "regulator-fixed";
	71	regulator-name = "SDHI0 Vcc";
	72	regulator-min-microvolt = <3300000>;
	73	regulator-max-microvolt = <3300000>;
	74	gpio = <&pfc 15 GPIO_ACTIVE_HIGH>;
	75	enable-active-high;
	76	};
	77
	78	vmmc_sdhi2: regulator@3 {
	79	compatible = "regulator-fixed";
	80	regulator-name = "SDHI2 Vcc";
	81	regulator-min-microvolt = <3300000>;
	82	regulator-max-microvolt = <3300000>;
	83	gpio = <&pfc 14 GPIO_ACTIVE_HIGH>;
	84	enable-active-high;
	85	};
	86
682d2dfb MD	87	leds {
	88	compatible = "gpio-leds";
	89	led1 {
	90	gpios = <&pfc 20 GPIO_ACTIVE_LOW>;
	91	label = "LED1";
	92	};
	93	led2 {
	94	gpios = <&pfc 21 GPIO_ACTIVE_LOW>;
	95	label = "LED2";
	96	};
	97	led3 {
	98	gpios = <&pfc 22 GPIO_ACTIVE_LOW>;
	99	label = "LED3";
	100	};
	101	led4 {
	102	gpios = <&pfc 23 GPIO_ACTIVE_LOW>;
	103	label = "LED4";
	104	};
	105	};
	106
	107	keyboard {
	108	compatible = "gpio-keys";
	109
	110	back-key {
	111	gpios = <&pcf8575 8 GPIO_ACTIVE_LOW>;
	112	linux,code = <KEY_BACK>;
	113	label = "SW3";
	114	};
	115
	116	right-key {
	117	gpios = <&pcf8575 9 GPIO_ACTIVE_LOW>;
	118	linux,code = <KEY_RIGHT>;
	119	label = "SW2-R";
	120	};
	121
	122	left-key {
	123	gpios = <&pcf8575 10 GPIO_ACTIVE_LOW>;
	124	linux,code = <KEY_LEFT>;
	125	label = "SW2-L";
	126	};
	127
	128	enter-key {
	129	gpios = <&pcf8575 11 GPIO_ACTIVE_LOW>;
	130	linux,code = <KEY_ENTER>;
	131	label = "SW2-P";
	132	};
	133
	134	up-key {
	135	gpios = <&pcf8575 12 GPIO_ACTIVE_LOW>;
	136	linux,code = <KEY_UP>;
	137	label = "SW2-U";
	138	};
	139
	140	down-key {
	141	gpios = <&pcf8575 13 GPIO_ACTIVE_LOW>;
	142	linux,code = <KEY_DOWN>;
	143	label = "SW2-D";
	144	};
	145
	146	home-key {
	147	gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>;
	148	linux,code = <KEY_HOME>;
	149	label = "SW1";
	150	};
151	};
152
153	sound {
154	compatible = "simple-audio-card";
155	simple-audio-card,format = "left_j";
156	simple-audio-card,cpu {
157	sound-dai = <&sh_fsi2 0>;
158	};
159	simple-audio-card,codec {
160	sound-dai = <&ak4648>;
161	bitclock-master;
162	frame-master;
163	system-clock-frequency = <11289600>;
164	};
165	};
166	};
167
17f0f738 GU	168	&bsc {
	169	ethernet@10000000 {
	170	compatible = "smsc,lan9220", "smsc,lan9115";
	171	reg = <0x10000000 0x100>;
	172	phy-mode = "mii";
	173	interrupt-parent = <&irqpin0>;
	174	interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
	175	reg-io-width = <4>;
	176	smsc,irq-push-pull;
	177	smsc,save-mac-address;
	178	vddvario-supply = <&reg_1p8v>;
	179	vdd33a-supply = <&reg_3p3v>;
	180	};
	181	};
	182
682d2dfb MD	183	&cmt1 {
	184	status = "okay";
	185	};
	186
	187	&extal2_clk {
	188	clock-frequency = <48000000>;
	189	};
	190
	191	&i2c0 {
	192	status = "okay";
	193
	194	compass@c {
	195	compatible = "asahi-kasei,ak8975";
	196	reg = <0x0c>;
	197	interrupt-parent = <&irqpin3>;
	198	interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
	199	};
	200
	201	ak4648: codec@12 {
	202	compatible = "asahi-kasei,ak4648";
	203	reg = <0x12>;
	204	#sound-dai-cells = <0>;
	205	};
	206
	207	accelerometer@1d {
	208	compatible = "adi,adxl34x";
	209	reg = <0x1d>;
	210	interrupt-parent = <&irqpin3>;
	211	interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
	212	<3 IRQ_TYPE_LEVEL_HIGH>;
	213	};
	214
	215	rtc@32 {
	216	compatible = "ricoh,r2025sd";
	217	reg = <0x32>;
	218	};
	219
	220	as3711@40 {
	221	compatible = "ams,as3711";
	222	reg = <0x40>;
	223
	224	regulators {
	225	vdd_dvfs: sd1 {
	226	regulator-name = "1.315V CPU";
	227	regulator-min-microvolt = <1050000>;
	228	regulator-max-microvolt = <1350000>;
	229	regulator-always-on;
	230	regulator-boot-on;
	231	};
	232	sd2 {
	233	regulator-name = "1.8V";
	234	regulator-min-microvolt = <1800000>;
	235	regulator-max-microvolt = <1800000>;
	236	regulator-always-on;
	237	regulator-boot-on;
	238	};
	239	sd4 {
	240	regulator-name = "1.215V";
	241	regulator-min-microvolt = <1215000>;
	242	regulator-max-microvolt = <1235000>;
	243	regulator-always-on;
	244	regulator-boot-on;
	245	};
	246	ldo2 {
247	regulator-name = "2.8V CPU";
248	regulator-min-microvolt = <2800000>;
249	regulator-max-microvolt = <2800000>;
250	regulator-always-on;
251	regulator-boot-on;
252	};
253	ldo3 {
254	regulator-name = "3.0V CPU";
255	regulator-min-microvolt = <3000000>;
256	regulator-max-microvolt = <3000000>;
257	regulator-always-on;
258	regulator-boot-on;
259	};
260	ldo4 {
261	regulator-name = "2.8V";
262	regulator-min-microvolt = <2800000>;
263	regulator-max-microvolt = <2800000>;
264	regulator-always-on;
265	regulator-boot-on;
266	};
267	ldo5 {
268	regulator-name = "2.8V #2";
269	regulator-min-microvolt = <2800000>;
270	regulator-max-microvolt = <2800000>;
271	regulator-always-on;
272	regulator-boot-on;
273	};
274	ldo7 {
275	regulator-name = "1.15V CPU";
276	regulator-min-microvolt = <1150000>;
277	regulator-max-microvolt = <1150000>;
278	regulator-always-on;
279	regulator-boot-on;
280	};
281	ldo8 {
282	regulator-name = "1.15V CPU #2";
283	regulator-min-microvolt = <1150000>;
284	regulator-max-microvolt = <1150000>;
285	regulator-always-on;
286	regulator-boot-on;
287	};
288	};
289	};
290	};
291
292	&i2c1 {
293	status = "okay";
294
295	touchscreen@55 {
296	compatible = "sitronix,st1232";
297	reg = <0x55>;
298	interrupt-parent = <&irqpin1>;
299	interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
300	};
301	};
302
303	&i2c3 {
304	pinctrl-0 = <&i2c3_pins>;
305	pinctrl-names = "default";
306	status = "okay";
307
308	pcf8575: gpio@20 {
309	compatible = "nxp,pcf8575";
310	reg = <0x20>;
311	interrupt-parent = <&irqpin2>;
312	interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
313	gpio-controller;
314	#gpio-cells = <2>;
315	interrupt-controller;
316	#interrupt-cells = <2>;
317	};
318	};
319
320	&mmcif {
321	pinctrl-0 = <&mmcif_pins>;
322	pinctrl-names = "default";
323
324	bus-width = <8>;
325	vmmc-supply = <&reg_1p8v>;
326	status = "okay";
327	};
328
329	&pfc {
330	i2c3_pins: i2c3 {
331	renesas,groups = "i2c3_1";
332	renesas,function = "i2c3";
333	};
334
335	mmcif_pins: mmc {
336	mux {
337	renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0";
338	renesas,function = "mmc0";
339	};
340	cfg {
341	renesas,groups = "mmc0_data8_0";
342	renesas,pins = "PORT279";
343	bias-pull-up;
344	};
345	};
346
347	scifa4_pins: serial4 {
348	renesas,groups = "scifa4_data", "scifa4_ctrl";
349	renesas,function = "scifa4";
350	};
351
352	sdhi0_pins: sd0 {
353	renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp";
354	renesas,function = "sdhi0";
355	};
356
357	sdhi2_pins: sd2 {
358	renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
359	renesas,function = "sdhi2";
360	};
361
362	fsia_pins: sounda {
363	renesas,groups = "fsia_mclk_in", "fsia_sclk_in",
364	"fsia_data_in", "fsia_data_out";
365	renesas,function = "fsia";
366	};
367	};
368
369	&scifa4 {
370	pinctrl-0 = <&scifa4_pins>;
371	pinctrl-names = "default";
372
373	status = "okay";
374	};
375
376	&sdhi0 {
377	pinctrl-0 = <&sdhi0_pins>;
378	pinctrl-names = "default";
379
380	vmmc-supply = <&vmmc_sdhi0>;
381	bus-width = <4>;
382	status = "okay";
383	};
384
385	&sdhi2 {
386	pinctrl-0 = <&sdhi2_pins>;
387	pinctrl-names = "default";
388
389	vmmc-supply = <&vmmc_sdhi2>;
390	bus-width = <4>;
391	broken-cd;
392	status = "okay";
393	};
394
395	&sh_fsi2 {
396	pinctrl-0 = <&fsia_pins>;
397	pinctrl-names = "default";
398
399	status = "okay";
7296d932	400	};