Commit | Line | Data |
---|---|---|
9c19cfa9 LW |
1 | /* |
2 | * Copyright 2012 ST-Ericsson AB | |
3 | * | |
4 | * The code contained herein is licensed under the GNU General Public | |
5 | * License. You may obtain a copy of the GNU General Public License | |
6 | * Version 2 or later at the following locations: | |
7 | * | |
8 | * http://www.opensource.org/licenses/gpl-license.html | |
9 | * http://www.gnu.org/copyleft/gpl.html | |
10 | * | |
11 | * Device Tree for the TVK1281618 UIB | |
12 | */ | |
13 | ||
14 | #include <dt-bindings/interrupt-controller/irq.h> | |
15 | ||
16 | / { | |
1a780d45 LW |
17 | gpio_keys { |
18 | compatible = "gpio-keys"; | |
19 | #address-cells = <1>; | |
20 | #size-cells = <0>; | |
21 | vdd-supply = <&ab8500_ldo_aux1_reg>; | |
22 | pinctrl-names = "default"; | |
23 | pinctrl-0 = <&prox_tvk_mode>, <&hall_tvk_mode>; | |
24 | ||
25 | button@139 { | |
26 | /* Proximity sensor */ | |
27 | gpios = <&gpio6 25 0x4>; | |
28 | linux,code = <11>; /* SW_FRONT_PROXIMITY */ | |
29 | label = "SFH7741 Proximity Sensor"; | |
30 | }; | |
31 | button@145 { | |
32 | /* Hall sensor */ | |
33 | gpios = <&gpio4 17 0x4>; | |
34 | linux,code = <0>; /* SW_LID */ | |
35 | label = "HED54XXU11 Hall Effect Sensor"; | |
36 | }; | |
37 | }; | |
38 | ||
9c19cfa9 | 39 | soc { |
7e0a51a0 | 40 | /* Add Synaptics touch screen, TC35893 keypad etc here */ |
84919b96 | 41 | i2c@80004000 { |
7e0a51a0 LW |
42 | tc35893@44 { |
43 | compatible = "toshiba,tc35893"; | |
84919b96 LW |
44 | reg = <0x44>; |
45 | interrupt-parent = <&gpio6>; | |
46 | interrupts = <26 IRQ_TYPE_EDGE_RISING>; | |
a45cb698 LW |
47 | pinctrl-names = "default"; |
48 | pinctrl-0 = <&tc35893_tvk_mode>; | |
84919b96 LW |
49 | |
50 | interrupt-controller; | |
7e0a51a0 | 51 | #interrupt-cells = <1>; |
84919b96 LW |
52 | |
53 | tc3589x_gpio { | |
7e0a51a0 LW |
54 | compatible = "toshiba,tc3589x-gpio"; |
55 | interrupts = <0>; | |
84919b96 LW |
56 | |
57 | interrupt-controller; | |
58 | #interrupt-cells = <2>; | |
59 | gpio-controller; | |
60 | #gpio-cells = <2>; | |
61 | }; | |
7e0a51a0 LW |
62 | tc3589x_keypad { |
63 | compatible = "toshiba,tc3589x-keypad"; | |
64 | interrupts = <6>; | |
65 | debounce-delay-ms = <4>; | |
66 | keypad,num-columns = <8>; | |
67 | keypad,num-rows = <8>; | |
68 | linux,no-autorepeat; | |
69 | linux,wakeup; | |
70 | linux,keymap = <0x0301006b | |
71 | 0x04010066 | |
72 | 0x06040072 | |
73 | 0x040200d7 | |
74 | 0x0303006a | |
75 | 0x0205000e | |
76 | 0x0607008b | |
77 | 0x0500001c | |
78 | 0x0403000b | |
79 | 0x03040034 | |
80 | 0x05020067 | |
81 | 0x0305006c | |
82 | 0x040500e7 | |
83 | 0x0005009e | |
84 | 0x06020073 | |
85 | 0x01030039 | |
86 | 0x07060069 | |
87 | 0x050500d9>; | |
88 | }; | |
84919b96 LW |
89 | }; |
90 | }; | |
d0e3bc81 LW |
91 | /* Sensors mounted on this board variant */ |
92 | i2c@80128000 { | |
93 | lsm303dlh@18 { | |
94 | /* Accelerometer */ | |
95 | compatible = "st,lsm303dlh-accel"; | |
96 | st,drdy-int-pin = <1>; | |
97 | reg = <0x18>; | |
98 | vdd-supply = <&ab8500_ldo_aux1_reg>; | |
99 | vddio-supply = <&db8500_vsmps2_reg>; | |
100 | pinctrl-names = "default"; | |
101 | pinctrl-0 = <&accel_tvk_mode>; | |
22a93167 LW |
102 | interrupt-parent = <&gpio2>; |
103 | interrupts = <18 IRQ_TYPE_EDGE_RISING>, | |
104 | <19 IRQ_TYPE_EDGE_RISING>; | |
d0e3bc81 | 105 | }; |
93deea9a | 106 | lsm303dlh@1e { |
d0e3bc81 | 107 | /* Magnetometer */ |
93deea9a | 108 | compatible = "st,lsm303dlh-magn"; |
d0e3bc81 LW |
109 | reg = <0x1e>; |
110 | vdd-supply = <&ab8500_ldo_aux1_reg>; | |
111 | vddio-supply = <&db8500_vsmps2_reg>; | |
112 | pinctrl-names = "default"; | |
113 | pinctrl-0 = <&magneto_tvk_mode>; | |
114 | }; | |
115 | l3g4200d@68 { | |
116 | /* Gyroscope */ | |
117 | compatible = "st,l3g4200d-gyro"; | |
118 | st,drdy-int-pin = <2>; | |
119 | reg = <0x68>; | |
120 | vdd-supply = <&ab8500_ldo_aux1_reg>; | |
121 | vddio-supply = <&db8500_vsmps2_reg>; | |
122 | }; | |
123 | lsp001wm@5c { | |
124 | /* Barometer/pressure sensor */ | |
125 | compatible = "st,lps001wp-press"; | |
126 | reg = <0x5c>; | |
127 | vdd-supply = <&ab8500_ldo_aux1_reg>; | |
128 | vddio-supply = <&db8500_vsmps2_reg>; | |
129 | }; | |
130 | }; | |
a45cb698 LW |
131 | pinctrl { |
132 | /* Pull up this GPIO pin */ | |
133 | tc35893 { | |
134 | tc35893_tvk_mode: tc35893_tvk { | |
135 | tvk_cfg { | |
1637d480 | 136 | pins = "GPIO218_AH11"; |
a45cb698 LW |
137 | ste,config = <&gpio_in_pu>; |
138 | }; | |
139 | }; | |
140 | }; | |
1a780d45 LW |
141 | prox { |
142 | prox_tvk_mode: prox_tvk { | |
143 | tvk_cfg { | |
1637d480 | 144 | pins = "GPIO217_AH12"; |
1a780d45 LW |
145 | ste,config = <&gpio_in_pu>; |
146 | }; | |
147 | }; | |
148 | }; | |
149 | hall { | |
150 | hall_tvk_mode: hall_tvk { | |
151 | tvk_cfg { | |
1637d480 | 152 | pins = "GPIO145_C13"; |
1a780d45 LW |
153 | ste,config = <&gpio_in_pu>; |
154 | }; | |
155 | }; | |
156 | }; | |
d0e3bc81 LW |
157 | accelerometer { |
158 | accel_tvk_mode: accel_tvk { | |
159 | /* Accelerometer interrupt lines 1 & 2 */ | |
160 | tvk_cfg { | |
1637d480 | 161 | pins = "GPIO82_C1", "GPIO83_D3"; |
d0e3bc81 LW |
162 | ste,config = <&gpio_in_pu>; |
163 | }; | |
164 | }; | |
165 | }; | |
166 | magnetometer { | |
167 | magneto_tvk_mode: magneto_tvk { | |
168 | /* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */ | |
169 | tvk_cfg1 { | |
1637d480 | 170 | pins = "GPIO31_V3"; |
d0e3bc81 LW |
171 | ste,config = <&gpio_in_pu>; |
172 | }; | |
173 | tvk_cfg2 { | |
1637d480 | 174 | pins = "GPIO32_V2"; |
d0e3bc81 LW |
175 | ste,config = <&gpio_in_pd>; |
176 | }; | |
177 | }; | |
178 | }; | |
a45cb698 | 179 | }; |
9c19cfa9 LW |
180 | }; |
181 | }; |