[deliverable/linux.git] / arch / arm / boot / dts / sun4i-a10-dserve-dsrv9703c.dts

/*
 * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
 *
 * This file is dual-licensed: you can use it either under the terms
 * of the GPL or the X11 license, at your option. Note that this dual
 * licensing only applies to this file, and not this project as a
 * whole.
 *
 *  a) This file is free software; you can redistribute it and/or
 *     modify it under the terms of the GNU General Public License as
 *     published by the Free Software Foundation; either version 2 of the
 *     License, or (at your option) any later version.
 *
 *     This file is distributed in the hope that it will be useful,
 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *     GNU General Public License for more details.
 *
 * Or, alternatively,
 *
 *  b) Permission is hereby granted, free of charge, to any person
 *     obtaining a copy of this software and associated documentation
 *     files (the "Software"), to deal in the Software without
 *     restriction, including without limitation the rights to use,
 *     copy, modify, merge, publish, distribute, sublicense, and/or
 *     sell copies of the Software, and to permit persons to whom the
 *     Software is furnished to do so, subject to the following
 *     conditions:
 *
 *     The above copyright notice and this permission notice shall be
 *     included in all copies or substantial portions of the Software.
 *
 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 *     OTHER DEALINGS IN THE SOFTWARE.
 */

/dts-v1/;
#include "sun4i-a10.dtsi"
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
#include <dt-bindings/pwm/pwm.h>

/ {
	model = "Dserve DSRV9703C";
	compatible = "dserve,dsrv9703c", "allwinner,sun4i-a10";

	aliases {
		serial0 = &uart0;
	};

	backlight: backlight {
		compatible = "pwm-backlight";
		pinctrl-names = "default";
		pinctrl-0 = <&bl_en_pin_dsrv9703c>;
		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
		default-brightness-level = <8>;
		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};

	haptics {
		compatible = "regulator-haptic";
		haptic-supply = <&reg_motor>;
		min-microvolt = <3000000>;
		max-microvolt = <3000000>;
	};

	reg_motor: reg_motor {
		compatible = "regulator-fixed";
		pinctrl-names = "default";
		pinctrl-0 = <&motor_pins>;
		regulator-name = "vcc-motor";
		regulator-min-microvolt = <3000000>;
		regulator-max-microvolt = <3000000>;
		enable-active-high;
		gpio = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
	};
};

&codec {
	pinctrl-names = "default";
	pinctrl-0 = <&codec_pa_pin>;
	allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
	status = "okay";
};

&cpu0 {
	cpu-supply = <&reg_dcdc2>;
};

&ehci1 {
	status = "okay";
};

&i2c0 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c0_pins_a>;
	status = "okay";

	axp209: pmic@34 {
		reg = <0x34>;
		interrupts = <0>;
	};
};

#include "axp209.dtsi"

&i2c1 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c1_pins_a>;
	/* pull-ups and devices require AXP209 LDO3 */
	status = "failed";
};

&i2c2 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c2_pins_a>;
	status = "okay";

	ft5406ee8: touchscreen@38 {
		compatible = "edt,edt-ft5406";
		reg = <0x38>;
		interrupt-parent = <&pio>;
		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
		pinctrl-names = "default";
		pinctrl-0 = <&touchscreen_pins>;
		reset-gpios = <&pio 1 13 GPIO_ACTIVE_LOW>;
		touchscreen-size-x = <1024>;
		touchscreen-size-y = <768>;
	};
};

&lradc {
	vref-supply = <&reg_ldo2>;
	status = "okay";

	button@400 {
		label = "Volume Down";
		linux,code = <KEY_VOLUMEDOWN>;
		channel = <0>;
		voltage = <400000>;
	};

	button@800 {
		label = "Volume Up";
		linux,code = <KEY_VOLUMEUP>;
		channel = <0>;
		voltage = <800000>;
	};
};

&mmc0 {
	pinctrl-names = "default";
	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
	vmmc-supply = <&reg_vcc3v3>;
	bus-width = <4>;
	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
	cd-inverted;
	status = "okay";
};

&otg_sram {
	status = "okay";
};

&pio {
	bl_en_pin_dsrv9703c: bl_en_pin@0 {
		allwinner,pins = "PH7";
		allwinner,function = "gpio_out";
		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
	};

	codec_pa_pin: codec_pa_pin@0 {
		allwinner,pins = "PH15";
		allwinner,function = "gpio_out";
		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
	};

	motor_pins: motor_pins@0 {
		allwinner,pins = "PB3";
		allwinner,function = "gpio_out";
		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
	};

	touchscreen_pins: touchscreen_pins@0 {
		allwinner,pins = "PB13";
		allwinner,function = "gpio_out";
		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
	};

	usb0_id_detect_pin: usb0_id_detect_pin@0 {
		allwinner,pins = "PH4";
		allwinner,function = "gpio_in";
		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
	};

	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
		allwinner,pins = "PH5";
		allwinner,function = "gpio_in";
		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
	};
};

&pwm {
	pinctrl-names = "default";
	pinctrl-0 = <&pwm0_pins_a>;
	status = "okay";
};

&reg_dcdc2 {
	regulator-always-on;
	regulator-min-microvolt = <1000000>;
	regulator-max-microvolt = <1400000>;
	regulator-name = "vdd-cpu";
};

&reg_dcdc3 {
	regulator-always-on;
	regulator-min-microvolt = <1250000>;
	regulator-max-microvolt = <1250000>;
	regulator-name = "vdd-int-dll";
};

&reg_ldo1 {
	regulator-name = "vdd-rtc";
};

&reg_ldo2 {
	regulator-always-on;
	regulator-min-microvolt = <3000000>;
	regulator-max-microvolt = <3000000>;
	regulator-name = "avcc";
};

&reg_usb0_vbus {
	status = "okay";
};

&reg_usb2_vbus {
	status = "okay";
};

&uart0 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart0_pins_a>;
	status = "okay";
};

&usb_otg {
	dr_mode = "otg";
	status = "okay";
};

&usbphy {
	pinctrl-names = "default";
	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
	usb0_vbus-supply = <&reg_usb0_vbus>;
	usb2_vbus-supply = <&reg_usb2_vbus>;
	status = "okay";
};
Commit	Line	Data
80410d49 HG	1	/*
	2	* Copyright 2016 Hans de Goede <hdegoede@redhat.com>
	3	*
	4	* This file is dual-licensed: you can use it either under the terms
	5	* of the GPL or the X11 license, at your option. Note that this dual
	6	* licensing only applies to this file, and not this project as a
	7	* whole.
	8	*
	9	* a) This file is free software; you can redistribute it and/or
	10	* modify it under the terms of the GNU General Public License as
	11	* published by the Free Software Foundation; either version 2 of the
	12	* License, or (at your option) any later version.
	13	*
	14	* This file is distributed in the hope that it will be useful,
	15	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	16	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	17	* GNU General Public License for more details.
	18	*
	19	* Or, alternatively,
	20	*
	21	* b) Permission is hereby granted, free of charge, to any person
	22	* obtaining a copy of this software and associated documentation
	23	* files (the "Software"), to deal in the Software without
	24	* restriction, including without limitation the rights to use,
	25	* copy, modify, merge, publish, distribute, sublicense, and/or
	26	* sell copies of the Software, and to permit persons to whom the
	27	* Software is furnished to do so, subject to the following
	28	* conditions:
	29	*
	30	* The above copyright notice and this permission notice shall be
	31	* included in all copies or substantial portions of the Software.
	32	*
	33	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
	34	* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
	35	* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
	36	* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
	37	* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
	38	* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
	39	* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
	40	* OTHER DEALINGS IN THE SOFTWARE.
	41	*/
	42
	43	/dts-v1/;
	44	#include "sun4i-a10.dtsi"
	45	#include "sunxi-common-regulators.dtsi"
	46	#include <dt-bindings/gpio/gpio.h>
	47	#include <dt-bindings/input/input.h>
	48	#include <dt-bindings/interrupt-controller/irq.h>
	49	#include <dt-bindings/pinctrl/sun4i-a10.h>
	50	#include <dt-bindings/pwm/pwm.h>
	51
	52	/ {
	53	model = "Dserve DSRV9703C";
	54	compatible = "dserve,dsrv9703c", "allwinner,sun4i-a10";
	55
	56	aliases {
	57	serial0 = &uart0;
	58	};
	59
	60	backlight: backlight {
	61	compatible = "pwm-backlight";
	62	pinctrl-names = "default";
	63	pinctrl-0 = <&bl_en_pin_dsrv9703c>;
	64	pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
65	brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
66	default-brightness-level = <8>;
67	enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
68	};
69
70	chosen {
71	stdout-path = "serial0:115200n8";
72	};
73
74	haptics {
75	compatible = "regulator-haptic";
76	haptic-supply = <&reg_motor>;
77	min-microvolt = <3000000>;
78	max-microvolt = <3000000>;
79	};
80
81	reg_motor: reg_motor {
82	compatible = "regulator-fixed";
83	pinctrl-names = "default";
84	pinctrl-0 = <&motor_pins>;
85	regulator-name = "vcc-motor";
86	regulator-min-microvolt = <3000000>;
87	regulator-max-microvolt = <3000000>;
88	enable-active-high;
89	gpio = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
90	};
91	};
92
93	&codec {
94	pinctrl-names = "default";
95	pinctrl-0 = <&codec_pa_pin>;
96	allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
97	status = "okay";
98	};
99
100	&cpu0 {
101	cpu-supply = <&reg_dcdc2>;
102	};
103
104	&ehci1 {
105	status = "okay";
106	};
107
108	&i2c0 {
109	pinctrl-names = "default";
110	pinctrl-0 = <&i2c0_pins_a>;
111	status = "okay";
112
113	axp209: pmic@34 {
114	reg = <0x34>;
115	interrupts = <0>;
116	};
117	};
118
119	#include "axp209.dtsi"
120
121	&i2c1 {
122	pinctrl-names = "default";
123	pinctrl-0 = <&i2c1_pins_a>;
124	/* pull-ups and devices require AXP209 LDO3 */
125	status = "failed";
126	};
127
128	&i2c2 {
129	pinctrl-names = "default";
130	pinctrl-0 = <&i2c2_pins_a>;
131	status = "okay";
132
133	ft5406ee8: touchscreen@38 {
134	compatible = "edt,edt-ft5406";
135	reg = <0x38>;
136	interrupt-parent = <&pio>;
137	interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
138	pinctrl-names = "default";
139	pinctrl-0 = <&touchscreen_pins>;
140	reset-gpios = <&pio 1 13 GPIO_ACTIVE_LOW>;
141	touchscreen-size-x = <1024>;
142	touchscreen-size-y = <768>;
143	};
144	};
145
146	&lradc {
147	vref-supply = <&reg_ldo2>;
148	status = "okay";
149
150	button@400 {
151	label = "Volume Down";
152	linux,code = <KEY_VOLUMEDOWN>;
153	channel = <0>;
154	voltage = <400000>;
155	};
156
157	button@800 {
158	label = "Volume Up";
159	linux,code = <KEY_VOLUMEUP>;
160	channel = <0>;
161	voltage = <800000>;
162	};
163	};
164
165	&mmc0 {
166	pinctrl-names = "default";
167	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
168	vmmc-supply = <&reg_vcc3v3>;
169	bus-width = <4>;
170	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
171	cd-inverted;
172	status = "okay";
173	};
174
175	&otg_sram {
176	status = "okay";
177	};
178
179	&pio {
180	bl_en_pin_dsrv9703c: bl_en_pin@0 {
181	allwinner,pins = "PH7";
182	allwinner,function = "gpio_out";
183	allwinner,drive = <SUN4I_PINCTRL_10_MA>;
184	allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
185	};
186
187	codec_pa_pin: codec_pa_pin@0 {
188	allwinner,pins = "PH15";
189	allwinner,function = "gpio_out";
190	allwinner,drive = <SUN4I_PINCTRL_10_MA>;
191	allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
192	};
193
194	motor_pins: motor_pins@0 {
195	allwinner,pins = "PB3";
196	allwinner,function = "gpio_out";
197	allwinner,drive = <SUN4I_PINCTRL_10_MA>;
198	allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
199	};
200
201	touchscreen_pins: touchscreen_pins@0 {
202	allwinner,pins = "PB13";
203	allwinner,function = "gpio_out";
204	allwinner,drive = <SUN4I_PINCTRL_10_MA>;
205	allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
206	};
207
208	usb0_id_detect_pin: usb0_id_detect_pin@0 {
209	allwinner,pins = "PH4";
210	allwinner,function = "gpio_in";
211	allwinner,drive = <SUN4I_PINCTRL_10_MA>;
212	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
213	};
214
215	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
216	allwinner,pins = "PH5";
217	allwinner,function = "gpio_in";
218	allwinner,drive = <SUN4I_PINCTRL_10_MA>;
219	allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
220	};
221	};
222
223	&pwm {
224	pinctrl-names = "default";
225	pinctrl-0 = <&pwm0_pins_a>;
226	status = "okay";
227	};
228
229	&reg_dcdc2 {
230	regulator-always-on;
231	regulator-min-microvolt = <1000000>;
232	regulator-max-microvolt = <1400000>;
233	regulator-name = "vdd-cpu";
234	};
235
236	&reg_dcdc3 {
237	regulator-always-on;
238	regulator-min-microvolt = <1250000>;
239	regulator-max-microvolt = <1250000>;
240	regulator-name = "vdd-int-dll";
241	};
242
243	&reg_ldo1 {
244	regulator-name = "vdd-rtc";
245	};
246
247	&reg_ldo2 {
248	regulator-always-on;
249	regulator-min-microvolt = <3000000>;
250	regulator-max-microvolt = <3000000>;
251	regulator-name = "avcc";
252	};
253
254	&reg_usb0_vbus {
255	status = "okay";
256	};
257
258	&reg_usb2_vbus {
259	status = "okay";
260	};
261
262	&uart0 {
263	pinctrl-names = "default";
264	pinctrl-0 = <&uart0_pins_a>;
265	status = "okay";
266	};
267
268	&usb_otg {
269	dr_mode = "otg";
270	status = "okay";
271	};
272
273	&usbphy {
274	pinctrl-names = "default";
275	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
276	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
277	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
278	usb0_vbus-supply = <&reg_usb0_vbus>;
279	usb2_vbus-supply = <&reg_usb2_vbus>;
280	status = "okay";
281	};