[deliverable/linux.git] / arch / arm / boot / dts / sun7i-a20-bananapro.dts

/*
 * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
 *
 * This file is dual-licensed: you can use it either under the terms
 * of the GPL or the X11 license, at your option. Note that this dual
 * licensing only applies to this file, and not this project as a
 * whole.
 *
 *  a) This file is free software; you can redistribute it and/or
 *     modify it under the terms of the GNU General Public License as
 *     published by the Free Software Foundation; either version 2 of the
 *     License, or (at your option) any later version.
 *
 *     This file is distributed in the hope that it will be useful,
 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *     GNU General Public License for more details.
 *
 *     You should have received a copy of the GNU General Public
 *     License along with this file; if not, write to the Free
 *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
 *     MA 02110-1301 USA
 *
 * Or, alternatively,
 *
 *  b) Permission is hereby granted, free of charge, to any person
 *     obtaining a copy of this software and associated documentation
 *     files (the "Software"), to deal in the Software without
 *     restriction, including without limitation the rights to use,
 *     copy, modify, merge, publish, distribute, sublicense, and/or
 *     sell copies of the Software, and to permit persons to whom the
 *     Software is furnished to do so, subject to the following
 *     conditions:
 *
 *     The above copyright notice and this permission notice shall be
 *     included in all copies or substantial portions of the Software.
 *
 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 *     OTHER DEALINGS IN THE SOFTWARE.
 */

/dts-v1/;
#include "sun7i-a20.dtsi"
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>

/ {
	model = "LeMaker Banana Pro";
	compatible = "lemaker,bananapro", "allwinner,sun7i-a20";

	leds {
		compatible = "gpio-leds";
		pinctrl-names = "default";
		pinctrl-0 = <&led_pins_bananapro>;

		blue {
			label = "bananapro:blue:usr";
			gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>;
		};

		green {
			label = "bananapro:green:usr";
			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
		};
	};

	reg_gmac_3v3: gmac-3v3 {
		compatible = "regulator-fixed";
		pinctrl-names = "default";
		pinctrl-0 = <&gmac_power_pin_bananapro>;
		regulator-name = "gmac-3v3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		startup-delay-us = <100000>;
		enable-active-high;
		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
	};

	reg_vmmc3: vmmc3 {
		compatible = "regulator-fixed";
		pinctrl-names = "default";
		pinctrl-0 = <&vmmc3_pin_bananapro>;
		regulator-name = "vmmc3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		enable-active-high;
		gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>;
	};
};

&ahci {
	status = "okay";
};

&ehci0 {
	status = "okay";
};

&ehci1 {
	status = "okay";
};

&gmac {
	pinctrl-names = "default";
	pinctrl-0 = <&gmac_pins_rgmii_a>;
	phy = <&phy1>;
	phy-mode = "rgmii";
	phy-supply = <&reg_gmac_3v3>;
	status = "okay";

	phy1: ethernet-phy@1 {
		reg = <1>;
	};
};

&i2c0 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c0_pins_a>;
	status = "okay";

	axp209: pmic@34 {
		compatible = "x-powers,axp209";
		reg = <0x34>;
		interrupt-parent = <&nmi_intc>;
		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;

		interrupt-controller;
		#interrupt-cells = <1>;
	};
};

&i2c2 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c2_pins_a>;
	status = "okay";
};

&ir0 {
	pinctrl-names = "default";
	pinctrl-0 = <&ir0_pins_a>;
	status = "okay";
};

&mmc0 {
	pinctrl-names = "default";
	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapro>;
	vmmc-supply = <&reg_vcc3v3>;
	bus-width = <4>;
	cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
	cd-inverted;
	status = "okay";
};

&mmc3 {
	pinctrl-names = "default";
	pinctrl-0 = <&mmc3_pins_a>;
	vmmc-supply = <&reg_vmmc3>;
	bus-width = <4>;
	non-removable;
	status = "okay";
};

&ohci0 {
	status = "okay";
};

&ohci1 {
	status = "okay";
};

&pio {
	gmac_power_pin_bananapro: gmac_power_pin@0 {
		allwinner,pins = "PH23";
		allwinner,function = "gpio_out";
		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
	};

	led_pins_bananapro: led_pins@0 {
		allwinner,pins = "PH24", "PG2";
		allwinner,function = "gpio_out";
		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
	};

	mmc0_cd_pin_bananapro: mmc0_cd_pin@0 {
		allwinner,pins = "PH10";
		allwinner,function = "gpio_in";
		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
	};

	usb1_vbus_pin_bananapro: usb1_vbus_pin@0 {
		allwinner,pins = "PH0";
		allwinner,function = "gpio_out";
		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
	};

	usb2_vbus_pin_bananapro: usb2_vbus_pin@0 {
		allwinner,pins = "PH1";
		allwinner,function = "gpio_out";
		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
	};

	vmmc3_pin_bananapro: vmmc3_pin@0 {
		allwinner,pins = "PH22";
		allwinner,function = "gpio_out";
		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
	};
};

&reg_usb1_vbus {
	pinctrl-0 = <&usb1_vbus_pin_bananapro>;
	gpio = <&pio 7 0 GPIO_ACTIVE_HIGH>; /* PH0 */
	status = "okay";
};

&reg_usb2_vbus {
	pinctrl-0 = <&usb2_vbus_pin_bananapro>;
	gpio = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
	status = "okay";
};

&spi0 {
	pinctrl-names = "default";
	pinctrl-0 = <&spi0_pins_a>;
	status = "okay";
};

&uart0 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart0_pins_a>;
	status = "okay";
};

&uart2 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart2_pins_a>;
	status = "okay";
};

&uart7 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart7_pins_a>;
	status = "okay";
};

&usbphy {
	usb1_vbus-supply = <&reg_usb1_vbus>;
	usb2_vbus-supply = <&reg_usb2_vbus>;
	status = "okay";
};
Commit	Line	Data
10662a33 HG	1	/*
	2	* Copyright 2015 Hans de Goede <hdegoede@redhat.com>
	3	*
	4	* This file is dual-licensed: you can use it either under the terms
	5	* of the GPL or the X11 license, at your option. Note that this dual
	6	* licensing only applies to this file, and not this project as a
	7	* whole.
	8	*
	9	* a) This file is free software; you can redistribute it and/or
	10	* modify it under the terms of the GNU General Public License as
	11	* published by the Free Software Foundation; either version 2 of the
	12	* License, or (at your option) any later version.
	13	*
	14	* This file is distributed in the hope that it will be useful,
	15	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	16	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	17	* GNU General Public License for more details.
	18	*
	19	* You should have received a copy of the GNU General Public
	20	* License along with this file; if not, write to the Free
	21	* Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
	22	* MA 02110-1301 USA
	23	*
	24	* Or, alternatively,
	25	*
	26	* b) Permission is hereby granted, free of charge, to any person
	27	* obtaining a copy of this software and associated documentation
	28	* files (the "Software"), to deal in the Software without
	29	* restriction, including without limitation the rights to use,
	30	* copy, modify, merge, publish, distribute, sublicense, and/or
	31	* sell copies of the Software, and to permit persons to whom the
	32	* Software is furnished to do so, subject to the following
	33	* conditions:
	34	*
	35	* The above copyright notice and this permission notice shall be
	36	* included in all copies or substantial portions of the Software.
	37	*
	38	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
	39	* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
	40	* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
	41	* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
	42	* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
	43	* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
	44	* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
	45	* OTHER DEALINGS IN THE SOFTWARE.
	46	*/
	47
	48	/dts-v1/;
	49	#include "sun7i-a20.dtsi"
	50	#include "sunxi-common-regulators.dtsi"
	51	#include <dt-bindings/gpio/gpio.h>
	52	#include <dt-bindings/interrupt-controller/arm-gic.h>
	53
	54	/ {
	55	model = "LeMaker Banana Pro";
	56	compatible = "lemaker,bananapro", "allwinner,sun7i-a20";
	57
	58	leds {
	59	compatible = "gpio-leds";
	60	pinctrl-names = "default";
	61	pinctrl-0 = <&led_pins_bananapro>;
	62
	63	blue {
	64	label = "bananapro:blue:usr";
65	gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>;
66	};
67
68	green {
69	label = "bananapro:green:usr";
70	gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
71	};
72	};
73
74	reg_gmac_3v3: gmac-3v3 {
75	compatible = "regulator-fixed";
76	pinctrl-names = "default";
77	pinctrl-0 = <&gmac_power_pin_bananapro>;
78	regulator-name = "gmac-3v3";
79	regulator-min-microvolt = <3300000>;
80	regulator-max-microvolt = <3300000>;
81	startup-delay-us = <100000>;
82	enable-active-high;
83	gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
84	};
85
86	reg_vmmc3: vmmc3 {
87	compatible = "regulator-fixed";
88	pinctrl-names = "default";
89	pinctrl-0 = <&vmmc3_pin_bananapro>;
90	regulator-name = "vmmc3";
91	regulator-min-microvolt = <3300000>;
92	regulator-max-microvolt = <3300000>;
93	enable-active-high;
94	gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>;
95	};
96	};
97
98	&ahci {
99	status = "okay";
100	};
101
102	&ehci0 {
103	status = "okay";
104	};
105
106	&ehci1 {
107	status = "okay";
108	};
109
110	&gmac {
111	pinctrl-names = "default";
112	pinctrl-0 = <&gmac_pins_rgmii_a>;
113	phy = <&phy1>;
114	phy-mode = "rgmii";
115	phy-supply = <&reg_gmac_3v3>;
116	status = "okay";
117
118	phy1: ethernet-phy@1 {
119	reg = <1>;
120	};
121	};
122
123	&i2c0 {
124	pinctrl-names = "default";
125	pinctrl-0 = <&i2c0_pins_a>;
126	status = "okay";
127
128	axp209: pmic@34 {
129	compatible = "x-powers,axp209";
130	reg = <0x34>;
131	interrupt-parent = <&nmi_intc>;
132	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
133
134	interrupt-controller;
135	#interrupt-cells = <1>;
136	};
137	};
138
139	&i2c2 {
140	pinctrl-names = "default";
141	pinctrl-0 = <&i2c2_pins_a>;
142	status = "okay";
143	};
144
145	&ir0 {
146	pinctrl-names = "default";
147	pinctrl-0 = <&ir0_pins_a>;
148	status = "okay";
149	};
150
151	&mmc0 {
152	pinctrl-names = "default";
153	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapro>;
154	vmmc-supply = <&reg_vcc3v3>;
155	bus-width = <4>;
156	cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
157	cd-inverted;
158	status = "okay";
159	};
160
161	&mmc3 {
162	pinctrl-names = "default";
163	pinctrl-0 = <&mmc3_pins_a>;
164	vmmc-supply = <&reg_vmmc3>;
165	bus-width = <4>;
166	non-removable;
167	status = "okay";
168	};
169
170	&ohci0 {
171	status = "okay";
172	};
173
174	&ohci1 {
175	status = "okay";
176	};
177
178	&pio {
179	gmac_power_pin_bananapro: gmac_power_pin@0 {
180	allwinner,pins = "PH23";
181	allwinner,function = "gpio_out";
182	allwinner,drive = <SUN4I_PINCTRL_10_MA>;
183	allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
184	};
185
186	led_pins_bananapro: led_pins@0 {
187	allwinner,pins = "PH24", "PG2";
188	allwinner,function = "gpio_out";
189	allwinner,drive = <SUN4I_PINCTRL_10_MA>;
190	allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
191	};
192
193	mmc0_cd_pin_bananapro: mmc0_cd_pin@0 {
194	allwinner,pins = "PH10";
195	allwinner,function = "gpio_in";
196	allwinner,drive = <SUN4I_PINCTRL_10_MA>;
197	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
198	};
199
200	usb1_vbus_pin_bananapro: usb1_vbus_pin@0 {
201	allwinner,pins = "PH0";
202	allwinner,function = "gpio_out";
203	allwinner,drive = <SUN4I_PINCTRL_10_MA>;
204	allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
205	};
206
207	usb2_vbus_pin_bananapro: usb2_vbus_pin@0 {
208	allwinner,pins = "PH1";
209	allwinner,function = "gpio_out";
210	allwinner,drive = <SUN4I_PINCTRL_10_MA>;
211	allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
212	};
213
214	vmmc3_pin_bananapro: vmmc3_pin@0 {
215	allwinner,pins = "PH22";
216	allwinner,function = "gpio_out";
217	allwinner,drive = <SUN4I_PINCTRL_10_MA>;
218	allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
219	};
220	};
221
222	&reg_usb1_vbus {
223	pinctrl-0 = <&usb1_vbus_pin_bananapro>;
224	gpio = <&pio 7 0 GPIO_ACTIVE_HIGH>; /* PH0 */
225	status = "okay";
226	};
227
228	&reg_usb2_vbus {
229	pinctrl-0 = <&usb2_vbus_pin_bananapro>;
230	gpio = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
231	status = "okay";
232	};
233
234	&spi0 {
235	pinctrl-names = "default";
236	pinctrl-0 = <&spi0_pins_a>;
237	status = "okay";
238	};
239
240	&uart0 {
241	pinctrl-names = "default";
242	pinctrl-0 = <&uart0_pins_a>;
243	status = "okay";
244	};
245
246	&uart2 {
247	pinctrl-names = "default";
248	pinctrl-0 = <&uart2_pins_a>;
249	status = "okay";
250	};
251
252	&uart7 {
253	pinctrl-names = "default";
254	pinctrl-0 = <&uart7_pins_a>;
255	status = "okay";
256	};
257
258	&usbphy {
259	usb1_vbus-supply = <&reg_usb1_vbus>;
260	usb2_vbus-supply = <&reg_usb2_vbus>;
261	status = "okay";
262	};