[deliverable/linux.git] / arch / arm / boot / dts / sun7i-a20-i12-tvbox.dts

/*
 * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
 *
 * This file is dual-licensed: you can use it either under the terms
 * of the GPL or the X11 license, at your option. Note that this dual
 * licensing only applies to this file, and not this project as a
 * whole.
 *
 *  a) This file is free software; you can redistribute it and/or
 *     modify it under the terms of the GNU General Public License as
 *     published by the Free Software Foundation; either version 2 of the
 *     License, or (at your option) any later version.
 *
 *     This file is distributed in the hope that it will be useful,
 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *     GNU General Public License for more details.
 *
 *     You should have received a copy of the GNU General Public
 *     License along with this file; if not, write to the Free
 *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
 *     MA 02110-1301 USA
 *
 * Or, alternatively,
 *
 *  b) Permission is hereby granted, free of charge, to any person
 *     obtaining a copy of this software and associated documentation
 *     files (the "Software"), to deal in the Software without
 *     restriction, including without limitation the rights to use,
 *     copy, modify, merge, publish, distribute, sublicense, and/or
 *     sell copies of the Software, and to permit persons to whom the
 *     Software is furnished to do so, subject to the following
 *     conditions:
 *
 *     The above copyright notice and this permission notice shall be
 *     included in all copies or substantial portions of the Software.
 *
 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 *     OTHER DEALINGS IN THE SOFTWARE.
 */

/dts-v1/;
#include "sun7i-a20.dtsi"
#include "sunxi-common-regulators.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>

/ {
	model = "I12 / Q5 / QT840A A20 tvbox";
	compatible = "allwinner,i12-tvbox", "allwinner,sun7i-a20";

	soc@01c00000 {
		mmc0: mmc@01c0f000 {
			pinctrl-names = "default";
			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
			vmmc-supply = <&reg_vcc3v3>;
			bus-width = <4>;
			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
			cd-inverted;
			status = "okay";
		};

		mmc3: mmc@01c12000 {
			pinctrl-names = "default";
			pinctrl-0 = <&mmc3_pins_a>;
			vmmc-supply = <&reg_vmmc3>;
			bus-width = <4>;
			non-removable;
			status = "okay";
		};

		usbphy: phy@01c13400 {
			usb1_vbus-supply = <&reg_usb1_vbus>;
			usb2_vbus-supply = <&reg_usb2_vbus>;
			status = "okay";
		};

		ehci0: usb@01c14000 {
			status = "okay";
		};

		ohci0: usb@01c14400 {
			status = "okay";
		};

		ehci1: usb@01c1c000 {
			status = "okay";
		};

		ohci1: usb@01c1c400 {
			status = "okay";
		};

		pinctrl@01c20800 {
			mmc3_pins_a: mmc3@0 {
				/* AP6210 / AP6330 requires pull-up */
				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
			};

			vmmc3_pin_i12_tvbox: vmmc3_pin@0 {
				allwinner,pins = "PH2";
				allwinner,function = "gpio_out";
				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
			};

			vmmc3_io_pin_i12_tvbox: vmmc3_io_pin@0 {
				allwinner,pins = "PH12";
				allwinner,function = "gpio_out";
				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
			};

			gmac_power_pin_i12_tvbox: gmac_power_pin@0 {
				allwinner,pins = "PH21";
				allwinner,function = "gpio_out";
				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
			};

			led_pins_i12_tvbox: led_pins@0 {
				allwinner,pins = "PH9", "PH20";
				allwinner,function = "gpio_out";
				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
			};
		};

		ir0: ir@01c21800 {
			pinctrl-names = "default";
			pinctrl-0 = <&ir0_pins_a>;
			status = "okay";
		};

		uart0: serial@01c28000 {
			pinctrl-names = "default";
			pinctrl-0 = <&uart0_pins_a>;
			status = "okay";
		};

		i2c0: i2c@01c2ac00 {
			pinctrl-names = "default";
			pinctrl-0 = <&i2c0_pins_a>;
			status = "okay";

			axp209: pmic@34 {
				compatible = "x-powers,axp209";
				reg = <0x34>;
				interrupt-parent = <&nmi_intc>;
				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;

				interrupt-controller;
				#interrupt-cells = <1>;
			};
		};

		gmac: ethernet@01c50000 {
			pinctrl-names = "default";
			pinctrl-0 = <&gmac_pins_mii_a>;
			phy = <&phy1>;
			phy-mode = "mii";
			phy-supply = <&reg_gmac_3v3>;
			status = "okay";

			phy1: ethernet-phy@1 {
				reg = <1>;
			};
		};
	};

	leds {
		compatible = "gpio-leds";
		pinctrl-names = "default";
		pinctrl-0 = <&led_pins_i12_tvbox>;

		red {
			label = "i12_tvbox:red:usr";
			gpios = <&pio 7 9 GPIO_ACTIVE_LOW>;
		};

		blue {
			label = "i12_tvbox:blue:usr";
			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
		};
	};

	reg_usb1_vbus: usb1-vbus {
		status = "okay";
	};

	reg_usb2_vbus: usb2-vbus {
		status = "okay";
	};

	reg_vmmc3: vmmc3 {
		compatible = "regulator-fixed";
		pinctrl-names = "default";
		pinctrl-0 = <&vmmc3_pin_i12_tvbox>;
		regulator-name = "vmmc3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		enable-active-high;
		gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>;
	};

	reg_vmmc3_io: vmmc3-io {
		compatible = "regulator-fixed";
		pinctrl-names = "default";
		pinctrl-0 = <&vmmc3_io_pin_i12_tvbox>;
		regulator-name = "vmmc3-io";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		/* This controls VCC-PI, must be always on! */
		regulator-always-on;
		enable-active-high;
		gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
	};

	reg_gmac_3v3: gmac-3v3 {
		compatible = "regulator-fixed";
		pinctrl-names = "default";
		pinctrl-0 = <&gmac_power_pin_i12_tvbox>;
		regulator-name = "gmac-3v3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		startup-delay-us = <50000>;
		enable-active-high;
		gpio = <&pio 7 21 GPIO_ACTIVE_HIGH>;
	};
};
Commit	Line	Data
c690d80b HG	1	/*
	2	* Copyright 2014 Hans de Goede <hdegoede@redhat.com>
	3	*
438989fa MR	4	* This file is dual-licensed: you can use it either under the terms
	5	* of the GPL or the X11 license, at your option. Note that this dual
	6	* licensing only applies to this file, and not this project as a
	7	* whole.
c690d80b	8	*
438989fa MR	9	* a) This file is free software; you can redistribute it and/or
	10	* modify it under the terms of the GNU General Public License as
	11	* published by the Free Software Foundation; either version 2 of the
	12	* License, or (at your option) any later version.
	13	*
	14	* This file is distributed in the hope that it will be useful,
	15	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	16	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	17	* GNU General Public License for more details.
	18	*
	19	* You should have received a copy of the GNU General Public
	20	* License along with this file; if not, write to the Free
	21	* Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
	22	* MA 02110-1301 USA
	23	*
	24	* Or, alternatively,
	25	*
	26	* b) Permission is hereby granted, free of charge, to any person
	27	* obtaining a copy of this software and associated documentation
	28	* files (the "Software"), to deal in the Software without
	29	* restriction, including without limitation the rights to use,
	30	* copy, modify, merge, publish, distribute, sublicense, and/or
	31	* sell copies of the Software, and to permit persons to whom the
	32	* Software is furnished to do so, subject to the following
	33	* conditions:
	34	*
	35	* The above copyright notice and this permission notice shall be
	36	* included in all copies or substantial portions of the Software.
	37	*
	38	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
	39	* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
	40	* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
	41	* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
	42	* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
	43	* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
	44	* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
	45	* OTHER DEALINGS IN THE SOFTWARE.
c690d80b HG	46	*/
	47
	48	/dts-v1/;
71455701 MR	49	#include "sun7i-a20.dtsi"
71455701 MR	50	#include "sunxi-common-regulators.dtsi"
c690d80b	51
bca12924	52	#include <dt-bindings/gpio/gpio.h>
a6bac9eb	53	#include <dt-bindings/interrupt-controller/irq.h>
092a0c3b	54	#include <dt-bindings/pinctrl/sun4i-a10.h>
bca12924	55
c690d80b HG	56	/ {
	57	model = "I12 / Q5 / QT840A A20 tvbox";
	58	compatible = "allwinner,i12-tvbox", "allwinner,sun7i-a20";
	59
	60	soc@01c00000 {
	61	mmc0: mmc@01c0f000 {
	62	pinctrl-names = "default";
	63	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
	64	vmmc-supply = <&reg_vcc3v3>;
	65	bus-width = <4>;
bca12924	66	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
c690d80b HG	67	cd-inverted;
	68	status = "okay";
	69	};
	70
	71	mmc3: mmc@01c12000 {
	72	pinctrl-names = "default";
	73	pinctrl-0 = <&mmc3_pins_a>;
	74	vmmc-supply = <&reg_vmmc3>;
	75	bus-width = <4>;
	76	non-removable;
	77	status = "okay";
	78	};
	79
	80	usbphy: phy@01c13400 {
	81	usb1_vbus-supply = <&reg_usb1_vbus>;
	82	usb2_vbus-supply = <&reg_usb2_vbus>;
	83	status = "okay";
	84	};
	85
	86	ehci0: usb@01c14000 {
	87	status = "okay";
	88	};
	89
	90	ohci0: usb@01c14400 {
	91	status = "okay";
	92	};
	93
	94	ehci1: usb@01c1c000 {
	95	status = "okay";
	96	};
	97
	98	ohci1: usb@01c1c400 {
	99	status = "okay";
	100	};
	101
	102	pinctrl@01c20800 {
	103	mmc3_pins_a: mmc3@0 {
	104	/* AP6210 / AP6330 requires pull-up */
092a0c3b	105	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
c690d80b HG	106	};
	107
	108	vmmc3_pin_i12_tvbox: vmmc3_pin@0 {
	109	allwinner,pins = "PH2";
	110	allwinner,function = "gpio_out";
092a0c3b MR	111	allwinner,drive = <SUN4I_PINCTRL_10_MA>;
092a0c3b MR	112	allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
c690d80b HG	113	};
	114
	115	vmmc3_io_pin_i12_tvbox: vmmc3_io_pin@0 {
	116	allwinner,pins = "PH12";
	117	allwinner,function = "gpio_out";
092a0c3b MR	118	allwinner,drive = <SUN4I_PINCTRL_10_MA>;
092a0c3b MR	119	allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
c690d80b HG	120	};
	121
	122	gmac_power_pin_i12_tvbox: gmac_power_pin@0 {
	123	allwinner,pins = "PH21";
	124	allwinner,function = "gpio_out";
092a0c3b MR	125	allwinner,drive = <SUN4I_PINCTRL_10_MA>;
092a0c3b MR	126	allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
c690d80b HG	127	};
	128
	129	led_pins_i12_tvbox: led_pins@0 {
	130	allwinner,pins = "PH9", "PH20";
	131	allwinner,function = "gpio_out";
092a0c3b MR	132	allwinner,drive = <SUN4I_PINCTRL_10_MA>;
092a0c3b MR	133	allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
c690d80b HG	134	};
	135	};
	136
abe36869 HG	137	ir0: ir@01c21800 {
	138	pinctrl-names = "default";
	139	pinctrl-0 = <&ir0_pins_a>;
	140	status = "okay";
	141	};
	142
c690d80b HG	143	uart0: serial@01c28000 {
	144	pinctrl-names = "default";
	145	pinctrl-0 = <&uart0_pins_a>;
	146	status = "okay";
	147	};
	148
ec0c933d CC	149	i2c0: i2c@01c2ac00 {
	150	pinctrl-names = "default";
	151	pinctrl-0 = <&i2c0_pins_a>;
	152	status = "okay";
	153
	154	axp209: pmic@34 {
	155	compatible = "x-powers,axp209";
	156	reg = <0x34>;
	157	interrupt-parent = <&nmi_intc>;
a6bac9eb	158	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
ec0c933d CC	159
	160	interrupt-controller;
	161	#interrupt-cells = <1>;
	162	};
	163	};
	164
c690d80b HG	165	gmac: ethernet@01c50000 {
	166	pinctrl-names = "default";
	167	pinctrl-0 = <&gmac_pins_mii_a>;
	168	phy = <&phy1>;
	169	phy-mode = "mii";
	170	phy-supply = <&reg_gmac_3v3>;
	171	status = "okay";
	172
	173	phy1: ethernet-phy@1 {
	174	reg = <1>;
	175	};
	176	};
	177	};
	178
	179	leds {
	180	compatible = "gpio-leds";
	181	pinctrl-names = "default";
	182	pinctrl-0 = <&led_pins_i12_tvbox>;
	183
	184	red {
	185	label = "i12_tvbox:red:usr";
bca12924	186	gpios = <&pio 7 9 GPIO_ACTIVE_LOW>;
c690d80b HG	187	};
	188
	189	blue {
	190	label = "i12_tvbox:blue:usr";
bca12924	191	gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
c690d80b HG	192	};
	193	};
	194
	195	reg_usb1_vbus: usb1-vbus {
	196	status = "okay";
	197	};
	198
	199	reg_usb2_vbus: usb2-vbus {
	200	status = "okay";
	201	};
	202
	203	reg_vmmc3: vmmc3 {
	204	compatible = "regulator-fixed";
	205	pinctrl-names = "default";
	206	pinctrl-0 = <&vmmc3_pin_i12_tvbox>;
	207	regulator-name = "vmmc3";
	208	regulator-min-microvolt = <3300000>;
	209	regulator-max-microvolt = <3300000>;
	210	enable-active-high;
bca12924	211	gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>;
c690d80b HG	212	};
	213
	214	reg_vmmc3_io: vmmc3-io {
	215	compatible = "regulator-fixed";
	216	pinctrl-names = "default";
	217	pinctrl-0 = <&vmmc3_io_pin_i12_tvbox>;
	218	regulator-name = "vmmc3-io";
	219	regulator-min-microvolt = <3300000>;
	220	regulator-max-microvolt = <3300000>;
	221	/* This controls VCC-PI, must be always on! */
	222	regulator-always-on;
	223	enable-active-high;
bca12924	224	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
c690d80b HG	225	};
	226
	227	reg_gmac_3v3: gmac-3v3 {
	228	compatible = "regulator-fixed";
	229	pinctrl-names = "default";
	230	pinctrl-0 = <&gmac_power_pin_i12_tvbox>;
	231	regulator-name = "gmac-3v3";
	232	regulator-min-microvolt = <3300000>;
	233	regulator-max-microvolt = <3300000>;
	234	startup-delay-us = <50000>;
	235	enable-active-high;
bca12924	236	gpio = <&pio 7 21 GPIO_ACTIVE_HIGH>;
c690d80b HG	237	};
c690d80b HG	238	};