ARM: STi: STiH416: Add Pinctrl settings for PWM
[deliverable/linux.git] / arch / arm / boot / dts / sun9i-a80-optimus.dts
CommitLineData
f49a430c
CYT
1/*
2 * Copyright 2014 Chen-Yu Tsai
3 *
4 * Chen-Yu Tsai <wens@csie.org>
5 *
6 * This file is dual-licensed: you can use it either under the terms
7 * of the GPL or the X11 license, at your option. Note that this dual
8 * licensing only applies to this file, and not this project as a
9 * whole.
10 *
136d18a8 11 * a) This file is free software; you can redistribute it and/or
f49a430c
CYT
12 * modify it under the terms of the GNU General Public License as
13 * published by the Free Software Foundation; either version 2 of the
14 * License, or (at your option) any later version.
15 *
136d18a8 16 * This file is distributed in the hope that it will be useful,
f49a430c
CYT
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
20 *
21 * You should have received a copy of the GNU General Public
136d18a8 22 * License along with this file; if not, write to the Free
f49a430c
CYT
23 * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
24 * MA 02110-1301 USA
25 *
26 * Or, alternatively,
27 *
28 * b) Permission is hereby granted, free of charge, to any person
29 * obtaining a copy of this software and associated documentation
30 * files (the "Software"), to deal in the Software without
31 * restriction, including without limitation the rights to use,
32 * copy, modify, merge, publish, distribute, sublicense, and/or
33 * sell copies of the Software, and to permit persons to whom the
34 * Software is furnished to do so, subject to the following
35 * conditions:
36 *
37 * The above copyright notice and this permission notice shall be
38 * included in all copies or substantial portions of the Software.
39 *
40 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
41 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
42 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
43 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
44 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
45 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
46 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
47 * OTHER DEALINGS IN THE SOFTWARE.
48 */
49
50/dts-v1/;
71455701 51#include "sun9i-a80.dtsi"
9e320feb 52#include "sunxi-common-regulators.dtsi"
f49a430c 53
bca12924 54#include <dt-bindings/gpio/gpio.h>
092a0c3b 55#include <dt-bindings/pinctrl/sun4i-a10.h>
f49a430c
CYT
56
57/ {
58 model = "Merrii A80 Optimus Board";
59 compatible = "merrii,a80-optimus", "allwinner,sun9i-a80";
60
117a2cc3
MR
61 aliases {
62 serial0 = &uart0;
63 serial1 = &uart4;
64 };
65
f49a430c
CYT
66 chosen {
67 bootargs = "earlyprintk console=ttyS0,115200";
68 };
69
0cc45399
CYT
70 leds {
71 compatible = "gpio-leds";
72 pinctrl-names = "default";
73 pinctrl-0 = <&led_pins_optimus>;
74
75 /* The LED names match those found on the board */
76
77 led2 {
78 label = "optimus:led2:usr";
bca12924 79 gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>;
0cc45399
CYT
80 };
81
82 /* led3 is on PM15, in R_PIO */
83
84 led4 {
85 label = "optimus:led4:usr";
bca12924 86 gpios = <&pio 7 0 GPIO_ACTIVE_HIGH>;
0cc45399
CYT
87 };
88 };
f49a430c 89};
10eb98b1
CYT
90
91&i2c3 {
92 pinctrl-names = "default";
93 pinctrl-0 = <&i2c3_pins_a>;
94 status = "okay";
95};
96
97&i2c3_pins_a {
98 /* Enable internal pull-up */
99 allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
100};
101
102&pio {
103 led_pins_optimus: led-pins@0 {
104 allwinner,pins = "PH0", "PH1";
105 allwinner,function = "gpio_out";
106 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
107 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
108 };
9e320feb
CYT
109
110 mmc0_cd_pin_optimus: mmc0_cd_pin@0 {
111 allwinner,pins = "PH18";
112 allwinner,function = "gpio_in";
113 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
114 allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
115 };
116};
117
118&mmc0 {
119 pinctrl-names = "default";
120 pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_optimus>;
121 vmmc-supply = <&reg_vcc3v0>;
122 bus-width = <4>;
123 cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH8 */
124 cd-inverted;
125 status = "okay";
10eb98b1
CYT
126};
127
0d69f87c
CYT
128&mmc2 {
129 pinctrl-names = "default";
130 pinctrl-0 = <&mmc2_8bit_pins>;
131 vmmc-supply = <&reg_vcc3v0>;
132 bus-width = <8>;
133 non-removable;
134 status = "okay";
135};
136
10eb98b1
CYT
137&uart0 {
138 pinctrl-names = "default";
139 pinctrl-0 = <&uart0_pins_a>;
140 status = "okay";
141};
142
143&uart4 {
144 pinctrl-names = "default";
145 pinctrl-0 = <&uart4_pins_a>;
146 status = "okay";
147};
148
149&uart4_pins_a {
150 /* Enable internal pull-up */
151 allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
152};
This page took 0.117079 seconds and 5 git commands to generate.