projects / deliverable / linux.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
ARM: tegra: nyan: Set maximum frequency for SPI flash
[deliverable/linux.git] / arch / arm / boot / dts / tegra124-nyan.dtsi
CommitLineData
53d02858
TV		 1#include <dt-bindings/input/input.h>
2#include "tegra124.dtsi"
3
4/ {
5 aliases {
6 rtc0 = "/i2c@0,7000d000/pmic@40";
7 rtc1 = "/rtc@0,7000e000";
8 serial0 = &uarta;
9 };
10
11 memory {
12 reg = <0x0 0x80000000 0x0 0x80000000>;
13 };
14
15 host1x@0,50000000 {
16 hdmi@0,54280000 {
17 status = "okay";
18
19 vdd-supply = <&vdd_3v3_hdmi>;
20 pll-supply = <&vdd_hdmi_pll>;
21 hdmi-supply = <&vdd_5v0_hdmi>;
22
23 nvidia,ddc-i2c-bus = <&hdmi_ddc>;
24 nvidia,hpd-gpio =
25 <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
26 };
27
28 sor@0,54540000 {
29 status = "okay";
30
31 nvidia,dpaux = <&dpaux>;
32 nvidia,panel = <&panel>;
33 };
34
35 dpaux@0,545c0000 {
36 vdd-supply = <&vdd_3v3_panel>;
37 status = "okay";
38 };
39 };
40
41 serial@0,70006000 {
42 /* Debug connector on the bottom of the board near SD card. */
43 status = "okay";
44 };
45
46 pwm@0,7000a000 {
47 status = "okay";
48 };
49
50 i2c@0,7000c000 {
51 status = "okay";
52 clock-frequency = <100000>;
53
54 acodec: audio-codec@10 {
55 compatible = "maxim,max98090";
56 reg = <0x10>;
57 interrupt-parent = <&gpio>;
58 interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
59 };
60
61 temperature-sensor@4c {
62 compatible = "ti,tmp451";
63 reg = <0x4c>;
64 interrupt-parent = <&gpio>;
65 interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
66
67 #thermal-sensor-cells = <1>;
68 };
69 };
70
71 i2c@0,7000c400 {
72 status = "okay";
73 clock-frequency = <100000>;
a0b9c1cb
TV		 74
75 trackpad@15 {
76 compatible = "elan,ekth3000";
77 reg = <0x15>;
78 interrupt-parent = <&gpio>;
79 interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>;
80 wakeup-source;
81 };
53d02858
TV		 82 };
83
84 i2c@0,7000c500 {
85 status = "okay";
86 clock-frequency = <400000>;
87
88 tpm@20 {
89 compatible = "infineon,slb9645tt";
90 reg = <0x20>;
91 };
92 };
93
94 hdmi_ddc: i2c@0,7000c700 {
95 status = "okay";
96 clock-frequency = <100000>;
97 };
98
99 i2c@0,7000d000 {
100 status = "okay";
101 clock-frequency = <400000>;
102
103 pmic: pmic@40 {
104 compatible = "ams,as3722";
105 reg = <0x40>;
106 interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
107
108 ams,system-power-controller;
109
110 #interrupt-cells = <2>;
111 interrupt-controller;
112
113 gpio-controller;
114 #gpio-cells = <2>;
115
116 pinctrl-names = "default";
117 pinctrl-0 = <&as3722_default>;
118
119 as3722_default: pinmux {
120 gpio0 {
121 pins = "gpio0";
122 function = "gpio";
123 bias-pull-down;
124 };
125
126 gpio1 {
127 pins = "gpio1";
128 function = "gpio";
129 bias-pull-up;
130 };
131
132 gpio2_4_7 {
133 pins = "gpio2", "gpio4", "gpio7";
134 function = "gpio";
135 bias-pull-up;
136 };
137
138 gpio3_6 {
139 pins = "gpio3", "gpio6";
140 bias-high-impedance;
141 };
142
143 gpio5 {
144 pins = "gpio5";
145 function = "clk32k-out";
146 bias-pull-down;
147 };
148 };
149
150 regulators {
151 vsup-sd2-supply = <&vdd_5v0_sys>;
152 vsup-sd3-supply = <&vdd_5v0_sys>;
153 vsup-sd4-supply = <&vdd_5v0_sys>;
154 vsup-sd5-supply = <&vdd_5v0_sys>;
155 vin-ldo0-supply = <&vdd_1v35_lp0>;
156 vin-ldo1-6-supply = <&vdd_3v3_run>;
157 vin-ldo2-5-7-supply = <&vddio_1v8>;
158 vin-ldo3-4-supply = <&vdd_3v3_sys>;
159 vin-ldo9-10-supply = <&vdd_5v0_sys>;
160 vin-ldo11-supply = <&vdd_3v3_run>;
161
162 sd0 {
163 regulator-name = "+VDD_CPU_AP";
164 regulator-min-microvolt = <700000>;
165 regulator-max-microvolt = <1350000>;
166 regulator-min-microamp = <3500000>;
167 regulator-max-microamp = <3500000>;
168 regulator-always-on;
169 regulator-boot-on;
170 ams,ext-control = <2>;
171 };
172
173 sd1 {
174 regulator-name = "+VDD_CORE";
175 regulator-min-microvolt = <700000>;
176 regulator-max-microvolt = <1350000>;
177 regulator-min-microamp = <2500000>;
178 regulator-max-microamp = <4000000>;
179 regulator-always-on;
180 regulator-boot-on;
181 ams,ext-control = <1>;
182 };
183
184 vdd_1v35_lp0: sd2 {
185 regulator-name = "+1.35V_LP0(sd2)";
186 regulator-min-microvolt = <1350000>;
187 regulator-max-microvolt = <1350000>;
188 regulator-always-on;
189 regulator-boot-on;
190 };
191
192 sd3 {
193 regulator-name = "+1.35V_LP0(sd3)";
194 regulator-min-microvolt = <1350000>;
195 regulator-max-microvolt = <1350000>;
196 regulator-always-on;
197 regulator-boot-on;
198 };
199
200 vdd_1v05_run: sd4 {
201 regulator-name = "+1.05V_RUN";
202 regulator-min-microvolt = <1050000>;
203 regulator-max-microvolt = <1050000>;
204 };
205
206 vddio_1v8: sd5 {
207 regulator-name = "+1.8V_VDDIO";
208 regulator-min-microvolt = <1800000>;
209 regulator-max-microvolt = <1800000>;
53d02858
TV		 210 regulator-always-on;
211 };
212
213 sd6 {
214 regulator-name = "+VDD_GPU_AP";
215 regulator-min-microvolt = <650000>;
216 regulator-max-microvolt = <1200000>;
217 regulator-min-microamp = <3500000>;
218 regulator-max-microamp = <3500000>;
219 regulator-boot-on;
220 regulator-always-on;
221 };
222
223 ldo0 {
224 regulator-name = "+1.05V_RUN_AVDD";
225 regulator-min-microvolt = <1050000>;
226 regulator-max-microvolt = <1050000>;
227 regulator-boot-on;
228 regulator-always-on;
229 ams,ext-control = <1>;
230 };
231
232 ldo1 {
233 regulator-name = "+1.8V_RUN_CAM";
234 regulator-min-microvolt = <1800000>;
235 regulator-max-microvolt = <1800000>;
236 };
237
238 ldo2 {
239 regulator-name = "+1.2V_GEN_AVDD";
240 regulator-min-microvolt = <1200000>;
241 regulator-max-microvolt = <1200000>;
242 regulator-boot-on;
243 regulator-always-on;
244 };
245
246 ldo3 {
247 regulator-name = "+1.00V_LP0_VDD_RTC";
248 regulator-min-microvolt = <1000000>;
249 regulator-max-microvolt = <1000000>;
250 regulator-boot-on;
251 regulator-always-on;
252 ams,enable-tracking;
253 };
254
255 vdd_run_cam: ldo4 {
256 regulator-name = "+3.3V_RUN_CAM";
257 regulator-min-microvolt = <2800000>;
258 regulator-max-microvolt = <2800000>;
259 };
260
261 ldo5 {
262 regulator-name = "+1.2V_RUN_CAM_FRONT";
263 regulator-min-microvolt = <1200000>;
264 regulator-max-microvolt = <1200000>;
265 };
266
267 vddio_sdmmc3: ldo6 {
268 regulator-name = "+VDDIO_SDMMC3";
269 regulator-min-microvolt = <1800000>;
270 regulator-max-microvolt = <3300000>;
271 };
272
273 ldo7 {
274 regulator-name = "+1.05V_RUN_CAM_REAR";
275 regulator-min-microvolt = <1050000>;
276 regulator-max-microvolt = <1050000>;
277 };
278
279 ldo9 {
280 regulator-name = "+2.8V_RUN_TOUCH";
281 regulator-min-microvolt = <2800000>;
282 regulator-max-microvolt = <2800000>;
283 };
284
285 ldo10 {
286 regulator-name = "+2.8V_RUN_CAM_AF";
287 regulator-min-microvolt = <2800000>;
288 regulator-max-microvolt = <2800000>;
289 };
290
291 ldo11 {
292 regulator-name = "+1.8V_RUN_VPP_FUSE";
293 regulator-min-microvolt = <1800000>;
294 regulator-max-microvolt = <1800000>;
295 };
296 };
297 };
298 };
299
300 spi@0,7000d400 {
301 status = "okay";
302
303 cros_ec: cros-ec@0 {
304 compatible = "google,cros-ec-spi";
305 spi-max-frequency = <3000000>;
306 interrupt-parent = <&gpio>;
307 interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
308 reg = <0>;
309
310 google,cros-ec-spi-msg-delay = <2000>;
311
312 i2c-tunnel {
313 compatible = "google,cros-ec-i2c-tunnel";
314 #address-cells = <1>;
315 #size-cells = <0>;
316
317 google,remote-bus = <0>;
318
319 charger: bq24735@9 {
320 compatible = "ti,bq24735";
321 reg = <0x9>;
322 interrupt-parent = <&gpio>;
323 interrupts = <TEGRA_GPIO(J, 0)
324 GPIO_ACTIVE_HIGH>;
325 ti,ac-detect-gpios = <&gpio
326 TEGRA_GPIO(J, 0)
327 GPIO_ACTIVE_HIGH>;
328 };
329
330 battery: sbs-battery@b {
331 compatible = "sbs,sbs-battery";
332 reg = <0xb>;
333 sbs,i2c-retry-count = <2>;
334 sbs,poll-retry-count = <10>;
335 power-supplies = <&charger>;
336 };
337 };
338 };
339 };
340
341 spi@0,7000da00 {
342 status = "okay";
343 spi-max-frequency = <25000000>;
344
345 flash@0 {
346 compatible = "winbond,w25q32dw";
97e147e8 347 spi-max-frequency = <25000000>;
53d02858
TV		 348 reg = <0>;
349 };
350 };
351
352 pmc@0,7000e400 {
353 nvidia,invert-interrupt;
354 nvidia,suspend-mode = <0>;
355 nvidia,cpu-pwr-good-time = <500>;
356 nvidia,cpu-pwr-off-time = <300>;
357 nvidia,core-pwr-good-time = <641 3845>;
358 nvidia,core-pwr-off-time = <61036>;
359 nvidia,core-power-req-active-high;
360 nvidia,sys-clock-req-active-high;
361 };
362
363 hda@0,70030000 {
364 status = "okay";
365 };
366
1d1690b8
TV		 367 sdhci0_pwrseq: sdhci0_pwrseq {
368 compatible = "mmc-pwrseq-simple";
369
370 reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
371 };
372
53d02858
TV		 373 sdhci@0,700b0000 { /* WiFi/BT on this bus */
374 status = "okay";
53d02858
TV		 375 bus-width = <4>;
376 no-1-8-v;
377 non-removable;
1d1690b8
TV		 378 mmc-pwrseq = <&sdhci0_pwrseq>;
379 vmmc-supply = <&vdd_3v3_lp0>;
380 vqmmc-supply = <&vddio_1v8>;
53d02858
TV		 381 };
382
383 sdhci@0,700b0400 { /* SD Card on this bus */
384 status = "okay";
385 cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
386 power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
387 bus-width = <4>;
388 no-1-8-v;
389 vqmmc-supply = <&vddio_sdmmc3>;
390 };
391
392 sdhci@0,700b0600 { /* eMMC on this bus */
393 status = "okay";
394 bus-width = <8>;
395 no-1-8-v;
396 non-removable;
397 };
398
399 ahub@0,70300000 {
400 i2s@0,70301100 {
401 status = "okay";
402 };
403 };
404
405 usb@0,7d000000 { /* Rear external USB port. */
406 status = "okay";
407 };
408
409 usb-phy@0,7d000000 {
410 status = "okay";
411 vbus-supply = <&vdd_usb1_vbus>;
412 };
413
414 usb@0,7d004000 { /* Internal webcam. */
415 status = "okay";
416 };
417
418 usb-phy@0,7d004000 {
419 status = "okay";
420 vbus-supply = <&vdd_run_cam>;
421 };
422
423 usb@0,7d008000 { /* Left external USB port. */
424 status = "okay";
425 };
426
427 usb-phy@0,7d008000 {
428 status = "okay";
429 vbus-supply = <&vdd_usb3_vbus>;
430 };
431
432 backlight: backlight {
433 compatible = "pwm-backlight";
434
435 enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
436 power-supply = <&vdd_led>;
437 pwms = <&pwm 1 1000000>;
438
439 default-brightness-level = <224>;
440 brightness-levels =
441 < 0 1 2 3 4 5 6 7
442 8 9 10 11 12 13 14 15
443 16 17 18 19 20 21 22 23
444 24 25 26 27 28 29 30 31
445 32 33 34 35 36 37 38 39
446 40 41 42 43 44 45 46 47
447 48 49 50 51 52 53 54 55
448 56 57 58 59 60 61 62 63
449 64 65 66 67 68 69 70 71
450 72 73 74 75 76 77 78 79
451 80 81 82 83 84 85 86 87
452 88 89 90 91 92 93 94 95
453 96 97 98 99 100 101 102 103
454 104 105 106 107 108 109 110 111
455 112 113 114 115 116 117 118 119
456 120 121 122 123 124 125 126 127
457 128 129 130 131 132 133 134 135
458 136 137 138 139 140 141 142 143
459 144 145 146 147 148 149 150 151
460 152 153 154 155 156 157 158 159
461 160 161 162 163 164 165 166 167
462 168 169 170 171 172 173 174 175
463 176 177 178 179 180 181 182 183
464 184 185 186 187 188 189 190 191
465 192 193 194 195 196 197 198 199
466 200 201 202 203 204 205 206 207
467 208 209 210 211 212 213 214 215
468 216 217 218 219 220 221 222 223
469 224 225 226 227 228 229 230 231
470 232 233 234 235 236 237 238 239
471 240 241 242 243 244 245 246 247
472 248 249 250 251 252 253 254 255
473 256>;
474 };
475
476 clocks {
477 compatible = "simple-bus";
478 #address-cells = <1>;
479 #size-cells = <0>;
480
481 clk32k_in: clock@0 {
482 compatible = "fixed-clock";
483 reg = <0>;
484 #clock-cells = <0>;
485 clock-frequency = <32768>;
486 };
487 };
488
489 gpio-keys {
490 compatible = "gpio-keys";
491
492 lid {
493 label = "Lid";
494 gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>;
495 linux,input-type = <5>;
496 linux,code = <KEY_RESERVED>;
497 debounce-interval = <1>;
498 gpio-key,wakeup;
499 };
500
501 power {
502 label = "Power";
503 gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
504 linux,code = <KEY_POWER>;
505 debounce-interval = <30>;
506 gpio-key,wakeup;
507 };
508 };
509
510 regulators {
511 compatible = "simple-bus";
512 #address-cells = <1>;
513 #size-cells = <0>;
514
515 vdd_mux: regulator@0 {
516 compatible = "regulator-fixed";
517 reg = <0>;
518 regulator-name = "+VDD_MUX";
519 regulator-min-microvolt = <12000000>;
520 regulator-max-microvolt = <12000000>;
521 regulator-always-on;
522 regulator-boot-on;
523 };
524
525 vdd_5v0_sys: regulator@1 {
526 compatible = "regulator-fixed";
527 reg = <1>;
528 regulator-name = "+5V_SYS";
529 regulator-min-microvolt = <5000000>;
530 regulator-max-microvolt = <5000000>;
531 regulator-always-on;
532 regulator-boot-on;
533 vin-supply = <&vdd_mux>;
534 };
535
536 vdd_3v3_sys: regulator@2 {
537 compatible = "regulator-fixed";
538 reg = <2>;
539 regulator-name = "+3.3V_SYS";
540 regulator-min-microvolt = <3300000>;
541 regulator-max-microvolt = <3300000>;
542 regulator-always-on;
543 regulator-boot-on;
544 vin-supply = <&vdd_mux>;
545 };
546
547 vdd_3v3_run: regulator@3 {
548 compatible = "regulator-fixed";
549 reg = <3>;
550 regulator-name = "+3.3V_RUN";
551 regulator-min-microvolt = <3300000>;
552 regulator-max-microvolt = <3300000>;
553 regulator-always-on;
554 regulator-boot-on;
555 gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
556 enable-active-high;
557 vin-supply = <&vdd_3v3_sys>;
558 };
559
560 vdd_3v3_hdmi: regulator@4 {
561 compatible = "regulator-fixed";
562 reg = <4>;
563 regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
564 regulator-min-microvolt = <3300000>;
565 regulator-max-microvolt = <3300000>;
566 vin-supply = <&vdd_3v3_run>;
567 };
568
569 vdd_led: regulator@5 {
570 compatible = "regulator-fixed";
571 reg = <5>;
572 regulator-name = "+VDD_LED";
573 gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
574 enable-active-high;
575 vin-supply = <&vdd_mux>;
576 };
577
578 vdd_5v0_ts: regulator@6 {
579 compatible = "regulator-fixed";
580 reg = <6>;
581 regulator-name = "+5V_VDD_TS_SW";
582 regulator-min-microvolt = <5000000>;
583 regulator-max-microvolt = <5000000>;
584 regulator-boot-on;
585 gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
586 enable-active-high;
587 vin-supply = <&vdd_5v0_sys>;
588 };
589
590 vdd_usb1_vbus: regulator@7 {
591 compatible = "regulator-fixed";
592 reg = <7>;
593 regulator-name = "+5V_USB_HS";
594 regulator-min-microvolt = <5000000>;
595 regulator-max-microvolt = <5000000>;
596 gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
597 enable-active-high;
598 gpio-open-drain;
599 vin-supply = <&vdd_5v0_sys>;
600 };
601
602 vdd_usb3_vbus: regulator@8 {
603 compatible = "regulator-fixed";
604 reg = <8>;
605 regulator-name = "+5V_USB_SS";
606 regulator-min-microvolt = <5000000>;
607 regulator-max-microvolt = <5000000>;
608 gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
609 enable-active-high;
610 gpio-open-drain;
611 vin-supply = <&vdd_5v0_sys>;
612 };
613
614 vdd_3v3_panel: regulator@9 {
615 compatible = "regulator-fixed";
616 reg = <9>;
617 regulator-name = "+3.3V_PANEL";
618 regulator-min-microvolt = <3300000>;
619 regulator-max-microvolt = <3300000>;
620 gpio = <&pmic 4 GPIO_ACTIVE_HIGH>;
621 enable-active-high;
622 vin-supply = <&vdd_3v3_run>;
623 };
624
625 vdd_3v3_lp0: regulator@10 {
626 compatible = "regulator-fixed";
627 reg = <10>;
628 regulator-name = "+3.3V_LP0";
629 regulator-min-microvolt = <3300000>;
630 regulator-max-microvolt = <3300000>;
631 /*
632 * TODO: find a way to wire this up with the USB EHCI
633 * controllers so that it can be enabled on demand.
634 */
635 regulator-always-on;
636 gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
637 enable-active-high;
638 vin-supply = <&vdd_3v3_sys>;
639 };
640
641 vdd_hdmi_pll: regulator@11 {
642 compatible = "regulator-fixed";
643 reg = <11>;
644 regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
645 regulator-min-microvolt = <1050000>;
646 regulator-max-microvolt = <1050000>;
647 gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
648 vin-supply = <&vdd_1v05_run>;
649 };
650
651 vdd_5v0_hdmi: regulator@12 {
652 compatible = "regulator-fixed";
653 reg = <12>;
654 regulator-name = "+5V_HDMI_CON";
655 regulator-min-microvolt = <5000000>;
656 regulator-max-microvolt = <5000000>;
657 gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
658 enable-active-high;
659 vin-supply = <&vdd_5v0_sys>;
660 };
661 };
662
663 sound {
664 nvidia,audio-routing =
665 "Headphones", "HPR",
666 "Headphones", "HPL",
667 "Speakers", "SPKR",
668 "Speakers", "SPKL",
669 "Mic Jack", "MICBIAS",
670 "DMICL", "Int Mic",
671 "DMICR", "Int Mic",
672 "IN34", "Mic Jack";
673
674 nvidia,i2s-controller = <&tegra_i2s1>;
675 nvidia,audio-codec = <&acodec>;
676
677 clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
678 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
679 <&tegra_car TEGRA124_CLK_EXTERN1>;
680 clock-names = "pll_a", "pll_a_out0", "mclk";
681
682 nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>;
683 nvidia,mic-det-gpios =
684 <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
685 };
686};
687
688#include "cros-ec-keyboard.dtsi"
Linux kernel - Deliverables
This page took 0.050721 seconds and 5 git commands to generate.