Commit | Line | Data |
---|---|---|
640a7af5 LD |
1 | /dts-v1/; |
2 | ||
1bd0bd49 | 3 | #include "tegra30-cardhu.dtsi" |
640a7af5 LD |
4 | |
5 | /* This dts file support the cardhu A02 version of board */ | |
6 | ||
7 | / { | |
8 | model = "NVIDIA Tegra30 Cardhu A02 evaluation board"; | |
9 | compatible = "nvidia,cardhu-a02", "nvidia,cardhu", "nvidia,tegra30"; | |
fa4a9252 | 10 | |
57899053 SW |
11 | sdhci@78000400 { |
12 | status = "okay"; | |
13 | power-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>; | |
14 | bus-width = <4>; | |
15 | keep-power-in-suspend; | |
16 | }; | |
17 | ||
fa4a9252 LD |
18 | regulators { |
19 | compatible = "simple-bus"; | |
20 | #address-cells = <1>; | |
21 | #size-cells = <0>; | |
22 | ||
23 | ddr_reg: regulator@100 { | |
24 | compatible = "regulator-fixed"; | |
25 | reg = <100>; | |
26 | regulator-name = "vdd_ddr"; | |
27 | regulator-min-microvolt = <1500000>; | |
28 | regulator-max-microvolt = <1500000>; | |
29 | regulator-always-on; | |
30 | regulator-boot-on; | |
31 | enable-active-high; | |
3325f1bc | 32 | gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; |
fa4a9252 LD |
33 | }; |
34 | ||
35 | sys_3v3_reg: regulator@101 { | |
36 | compatible = "regulator-fixed"; | |
37 | reg = <101>; | |
38 | regulator-name = "sys_3v3"; | |
39 | regulator-min-microvolt = <3300000>; | |
40 | regulator-max-microvolt = <3300000>; | |
41 | regulator-always-on; | |
42 | regulator-boot-on; | |
43 | enable-active-high; | |
3325f1bc | 44 | gpio = <&pmic 7 GPIO_ACTIVE_HIGH>; |
fa4a9252 LD |
45 | }; |
46 | ||
47 | usb1_vbus_reg: regulator@102 { | |
48 | compatible = "regulator-fixed"; | |
49 | reg = <102>; | |
50 | regulator-name = "usb1_vbus"; | |
51 | regulator-min-microvolt = <5000000>; | |
52 | regulator-max-microvolt = <5000000>; | |
53 | enable-active-high; | |
3325f1bc | 54 | gpio = <&gpio TEGRA_GPIO(I, 4) GPIO_ACTIVE_HIGH>; |
fa4a9252 LD |
55 | gpio-open-drain; |
56 | vin-supply = <&vdd_5v0_reg>; | |
57 | }; | |
58 | ||
59 | usb3_vbus_reg: regulator@103 { | |
60 | compatible = "regulator-fixed"; | |
61 | reg = <103>; | |
62 | regulator-name = "usb3_vbus"; | |
63 | regulator-min-microvolt = <5000000>; | |
64 | regulator-max-microvolt = <5000000>; | |
65 | enable-active-high; | |
3325f1bc | 66 | gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>; |
fa4a9252 LD |
67 | gpio-open-drain; |
68 | vin-supply = <&vdd_5v0_reg>; | |
69 | }; | |
70 | ||
71 | vdd_5v0_reg: regulator@104 { | |
72 | compatible = "regulator-fixed"; | |
73 | reg = <104>; | |
74 | regulator-name = "5v0"; | |
75 | regulator-min-microvolt = <5000000>; | |
76 | regulator-max-microvolt = <5000000>; | |
77 | enable-active-high; | |
3325f1bc | 78 | gpio = <&pmic 2 GPIO_ACTIVE_HIGH>; |
fa4a9252 LD |
79 | }; |
80 | ||
81 | vdd_bl_reg: regulator@105 { | |
82 | compatible = "regulator-fixed"; | |
83 | reg = <105>; | |
84 | regulator-name = "vdd_bl"; | |
85 | regulator-min-microvolt = <5000000>; | |
86 | regulator-max-microvolt = <5000000>; | |
87 | regulator-always-on; | |
88 | regulator-boot-on; | |
89 | enable-active-high; | |
3325f1bc | 90 | gpio = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_HIGH>; |
fa4a9252 LD |
91 | }; |
92 | }; | |
640a7af5 LD |
93 | }; |
94 |