projects / deliverable / linux.git / blame
| Commit | Line | Data |
|---|---|---|
| 640a7af5 LD |
1 | /dts-v1/; |
| 2 | ||
| 1bd0bd49 | 3 | #include "tegra30-cardhu.dtsi" |
| 640a7af5 LD |
4 | |
| 5 | /* This dts file support the cardhu A04 and later versions of board */ | |
| 6 | ||
| 7 | / { | |
| 8 | model = "NVIDIA Tegra30 Cardhu A04 (A05, A06, A07) evaluation board"; | |
| 9 | compatible = "nvidia,cardhu-a04", "nvidia,cardhu", "nvidia,tegra30"; | |
| fa4a9252 LD |
10 | |
| 11 | regulators { | |
| 12 | compatible = "simple-bus"; | |
| 13 | #address-cells = <1>; | |
| 14 | #size-cells = <0>; | |
| 15 | ||
| 16 | ddr_reg: regulator@100 { | |
| 17 | compatible = "regulator-fixed"; | |
| 18 | regulator-name = "ddr"; | |
| 19 | reg = <100>; | |
| 20 | regulator-min-microvolt = <1500000>; | |
| 21 | regulator-max-microvolt = <1500000>; | |
| 22 | regulator-always-on; | |
| 23 | regulator-boot-on; | |
| 24 | enable-active-high; | |
| 3325f1bc | 25 | gpio = <&pmic 7 GPIO_ACTIVE_HIGH>; |
| fa4a9252 LD |
26 | }; |
| 27 | ||
| 28 | sys_3v3_reg: regulator@101 { | |
| 29 | compatible = "regulator-fixed"; | |
| 30 | reg = <101>; | |
| 31 | regulator-name = "sys_3v3"; | |
| 32 | regulator-min-microvolt = <3300000>; | |
| 33 | regulator-max-microvolt = <3300000>; | |
| 34 | regulator-always-on; | |
| 35 | regulator-boot-on; | |
| 36 | enable-active-high; | |
| 3325f1bc | 37 | gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; |
| fa4a9252 LD |
38 | }; |
| 39 | ||
| 40 | usb1_vbus_reg: regulator@102 { | |
| 41 | compatible = "regulator-fixed"; | |
| 42 | reg = <102>; | |
| 43 | regulator-name = "usb1_vbus"; | |
| 44 | regulator-min-microvolt = <5000000>; | |
| 45 | regulator-max-microvolt = <5000000>; | |
| 46 | enable-active-high; | |
| 3325f1bc | 47 | gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>; |
| fa4a9252 LD |
48 | gpio-open-drain; |
| 49 | vin-supply = <&vdd_5v0_reg>; | |
| 50 | }; | |
| 51 | ||
| 52 | usb3_vbus_reg: regulator@103 { | |
| 53 | compatible = "regulator-fixed"; | |
| 54 | reg = <103>; | |
| 55 | regulator-name = "usb3_vbus"; | |
| 56 | regulator-min-microvolt = <5000000>; | |
| 57 | regulator-max-microvolt = <5000000>; | |
| 58 | enable-active-high; | |
| 3325f1bc | 59 | gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>; |
| fa4a9252 LD |
60 | gpio-open-drain; |
| 61 | vin-supply = <&vdd_5v0_reg>; | |
| 62 | }; | |
| 63 | ||
| 64 | vdd_5v0_reg: regulator@104 { | |
| 65 | compatible = "regulator-fixed"; | |
| 66 | reg = <104>; | |
| 67 | regulator-name = "5v0"; | |
| 68 | regulator-min-microvolt = <5000000>; | |
| 69 | regulator-max-microvolt = <5000000>; | |
| 70 | enable-active-high; | |
| 3325f1bc | 71 | gpio = <&pmic 8 GPIO_ACTIVE_HIGH>; |
| fa4a9252 LD |
72 | }; |
| 73 | ||
| 74 | vdd_bl_reg: regulator@105 { | |
| 75 | compatible = "regulator-fixed"; | |
| 76 | reg = <105>; | |
| 77 | regulator-name = "vdd_bl"; | |
| 78 | regulator-min-microvolt = <5000000>; | |
| 79 | regulator-max-microvolt = <5000000>; | |
| 80 | regulator-always-on; | |
| 81 | regulator-boot-on; | |
| 82 | enable-active-high; | |
| 3325f1bc | 83 | gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>; |
| fa4a9252 LD |
84 | }; |
| 85 | ||
| 86 | vdd_bl2_reg: regulator@106 { | |
| 87 | compatible = "regulator-fixed"; | |
| 88 | reg = <106>; | |
| 89 | regulator-name = "vdd_bl2"; | |
| 90 | regulator-min-microvolt = <5000000>; | |
| 91 | regulator-max-microvolt = <5000000>; | |
| 92 | regulator-always-on; | |
| 93 | regulator-boot-on; | |
| 94 | enable-active-high; | |
| 3325f1bc | 95 | gpio = <&gpio TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>; |
| fa4a9252 LD |
96 | }; |
| 97 | }; | |
| 6fb11131 WN |
98 | |
| 99 | sdhci@78000400 { | |
| 100 | status = "okay"; | |
| 3325f1bc | 101 | power-gpios = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_HIGH>; |
| 6fb11131 | 102 | bus-width = <4>; |
| 7a2617a6 | 103 | keep-power-in-suspend; |
| 6fb11131 | 104 | }; |
| 640a7af5 | 105 | }; |