Commit | Line | Data |
---|---|---|
640a7af5 LD |
1 | /dts-v1/; |
2 | ||
3 | /include/ "tegra30-cardhu.dtsi" | |
4 | ||
5 | /* This dts file support the cardhu A04 and later versions of board */ | |
6 | ||
7 | / { | |
8 | model = "NVIDIA Tegra30 Cardhu A04 (A05, A06, A07) evaluation board"; | |
9 | compatible = "nvidia,cardhu-a04", "nvidia,cardhu", "nvidia,tegra30"; | |
fa4a9252 LD |
10 | |
11 | regulators { | |
12 | compatible = "simple-bus"; | |
13 | #address-cells = <1>; | |
14 | #size-cells = <0>; | |
15 | ||
16 | ddr_reg: regulator@100 { | |
17 | compatible = "regulator-fixed"; | |
18 | regulator-name = "ddr"; | |
19 | reg = <100>; | |
20 | regulator-min-microvolt = <1500000>; | |
21 | regulator-max-microvolt = <1500000>; | |
22 | regulator-always-on; | |
23 | regulator-boot-on; | |
24 | enable-active-high; | |
25 | gpio = <&pmic 7 0>; | |
26 | }; | |
27 | ||
28 | sys_3v3_reg: regulator@101 { | |
29 | compatible = "regulator-fixed"; | |
30 | reg = <101>; | |
31 | regulator-name = "sys_3v3"; | |
32 | regulator-min-microvolt = <3300000>; | |
33 | regulator-max-microvolt = <3300000>; | |
34 | regulator-always-on; | |
35 | regulator-boot-on; | |
36 | enable-active-high; | |
37 | gpio = <&pmic 6 0>; | |
38 | }; | |
39 | ||
40 | usb1_vbus_reg: regulator@102 { | |
41 | compatible = "regulator-fixed"; | |
42 | reg = <102>; | |
43 | regulator-name = "usb1_vbus"; | |
44 | regulator-min-microvolt = <5000000>; | |
45 | regulator-max-microvolt = <5000000>; | |
46 | enable-active-high; | |
47 | gpio = <&gpio 238 0>; /* GPIO PDD6 */ | |
48 | gpio-open-drain; | |
49 | vin-supply = <&vdd_5v0_reg>; | |
50 | }; | |
51 | ||
52 | usb3_vbus_reg: regulator@103 { | |
53 | compatible = "regulator-fixed"; | |
54 | reg = <103>; | |
55 | regulator-name = "usb3_vbus"; | |
56 | regulator-min-microvolt = <5000000>; | |
57 | regulator-max-microvolt = <5000000>; | |
58 | enable-active-high; | |
59 | gpio = <&gpio 236 0>; /* GPIO PDD4 */ | |
60 | gpio-open-drain; | |
61 | vin-supply = <&vdd_5v0_reg>; | |
62 | }; | |
63 | ||
64 | vdd_5v0_reg: regulator@104 { | |
65 | compatible = "regulator-fixed"; | |
66 | reg = <104>; | |
67 | regulator-name = "5v0"; | |
68 | regulator-min-microvolt = <5000000>; | |
69 | regulator-max-microvolt = <5000000>; | |
70 | enable-active-high; | |
71 | gpio = <&pmic 8 0>; | |
72 | }; | |
73 | ||
74 | vdd_bl_reg: regulator@105 { | |
75 | compatible = "regulator-fixed"; | |
76 | reg = <105>; | |
77 | regulator-name = "vdd_bl"; | |
78 | regulator-min-microvolt = <5000000>; | |
79 | regulator-max-microvolt = <5000000>; | |
80 | regulator-always-on; | |
81 | regulator-boot-on; | |
82 | enable-active-high; | |
83 | gpio = <&gpio 234 0>; /* GPIO PDD2 */ | |
84 | }; | |
85 | ||
86 | vdd_bl2_reg: regulator@106 { | |
87 | compatible = "regulator-fixed"; | |
88 | reg = <106>; | |
89 | regulator-name = "vdd_bl2"; | |
90 | regulator-min-microvolt = <5000000>; | |
91 | regulator-max-microvolt = <5000000>; | |
92 | regulator-always-on; | |
93 | regulator-boot-on; | |
94 | enable-active-high; | |
95 | gpio = <&gpio 232 0>; /* GPIO PDD0 */ | |
96 | }; | |
97 | }; | |
6fb11131 WN |
98 | |
99 | sdhci@78000400 { | |
100 | status = "okay"; | |
101 | power-gpios = <&gpio 27 0>; /* gpio PD3 */ | |
102 | bus-width = <4>; | |
7a2617a6 | 103 | keep-power-in-suspend; |
6fb11131 | 104 | }; |
640a7af5 | 105 | }; |