[ARM] 4939/1: [CSB637] Update defconfig to use gpio-led

[deliverable/linux.git] / arch / arm / mach-at91 / Makefile

#
# Makefile for the linux kernel.
#

obj-y		:= irq.o gpio.o
obj-m		:=
obj-n		:=
obj-		:=

obj-$(CONFIG_AT91_PMC_UNIT)	+= clock.o

# CPU-specific support
obj-$(CONFIG_ARCH_AT91RM9200)	+= at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
obj-$(CONFIG_ARCH_AT91SAM9260)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o
obj-$(CONFIG_ARCH_AT91SAM9261)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o
obj-$(CONFIG_ARCH_AT91SAM9263)	+= at91sam9263.o at91sam926x_time.o at91sam9263_devices.o
obj-$(CONFIG_ARCH_AT91SAM9RL)	+= at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o
obj-$(CONFIG_ARCH_AT91CAP9)	+= at91cap9.o at91sam926x_time.o at91cap9_devices.o
obj-$(CONFIG_ARCH_AT91X40)	+= at91x40.o at91x40_time.o

# AT91RM9200 board-specific support
obj-$(CONFIG_MACH_ONEARM)	+= board-1arm.o
obj-$(CONFIG_ARCH_AT91RM9200DK)	+= board-dk.o
obj-$(CONFIG_MACH_AT91RM9200EK)	+= board-ek.o
obj-$(CONFIG_MACH_CSB337)	+= board-csb337.o
obj-$(CONFIG_MACH_CSB637)	+= board-csb637.o
obj-$(CONFIG_MACH_CARMEVA)	+= board-carmeva.o
obj-$(CONFIG_MACH_KB9200)	+= board-kb9202.o
obj-$(CONFIG_MACH_ATEB9200)	+= board-eb9200.o
obj-$(CONFIG_MACH_KAFA)		+= board-kafa.o
obj-$(CONFIG_MACH_PICOTUX2XX)	+= board-picotux200.o

# AT91SAM9260 board-specific support
obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o

# AT91SAM9261 board-specific support
obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o

# AT91SAM9263 board-specific support
obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o

# AT91SAM9RL board-specific support
obj-$(CONFIG_MACH_AT91SAM9RLEK)	+= board-sam9rlek.o

# AT91CAP9 board-specific support
obj-$(CONFIG_MACH_AT91CAP9ADK)	+= board-cap9adk.o

# AT91X40 board-specific support
obj-$(CONFIG_MACH_AT91EB01)	+= board-eb01.o

# Drivers
obj-y				+= leds.o

# Power Management
obj-$(CONFIG_PM)		+= pm.o

ifeq ($(CONFIG_PM_DEBUG),y)
CFLAGS_pm.o += -DDEBUG
endif