[deliverable/linux.git] / arch / arm / mach-at91 / board-kafa.c

/*
 * linux/arch/arm/mach-at91/board-kafa.c
 *
 *  Copyright (C) 2006 Sperry-Sun
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */

#include <linux/types.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/platform_device.h>

#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>

#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>

#include <mach/board.h>
#include <mach/at91_aic.h>
#include <mach/cpu.h>

#include "generic.h"


static void __init kafa_init_early(void)
{
	/* Set cpu type: PQFP */
	at91rm9200_set_type(ARCH_REVISON_9200_PQFP);

	/* Initialize processor: 18.432 MHz crystal */
	at91_initialize(18432000);
}

static struct macb_platform_data __initdata kafa_eth_data = {
	.phy_irq_pin	= AT91_PIN_PC4,
	.is_rmii	= 0,
};

static struct at91_usbh_data __initdata kafa_usbh_data = {
	.ports		= 1,
	.vbus_pin	= {-EINVAL, -EINVAL},
	.overcurrent_pin= {-EINVAL, -EINVAL},
};

static struct at91_udc_data __initdata kafa_udc_data = {
	.vbus_pin	= AT91_PIN_PB6,
	.pullup_pin	= AT91_PIN_PB7,
};

static void __init kafa_board_init(void)
{
	/* Set up the LEDs */
	at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);

	/* Serial */
	/* DBGU on ttyS0. (Rx & Tx only) */
	at91_register_uart(0, 0, 0);

	/* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
	at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
	at91_add_device_serial();
	/* Ethernet */
	at91_add_device_eth(&kafa_eth_data);
	/* USB Host */
	at91_add_device_usbh(&kafa_usbh_data);
	/* USB Device */
	at91_add_device_udc(&kafa_udc_data);
	/* I2C */
	at91_add_device_i2c(NULL, 0);
	/* SPI */
	at91_add_device_spi(NULL, 0);
}

MACHINE_START(KAFA, "Sperry-Sun KAFA")
	/* Maintainer: Sergei Sharonov */
	.timer		= &at91rm9200_timer,
	.map_io		= at91_map_io,
	.handle_irq	= at91_aic_handle_irq,
	.init_early	= kafa_init_early,
	.init_irq	= at91_init_irq_default,
	.init_machine	= kafa_board_init,
MACHINE_END
Commit	Line	Data
6902f523	1	/*
9d041268	2	* linux/arch/arm/mach-at91/board-kafa.c
6902f523 AV	3	*
	4	* Copyright (C) 2006 Sperry-Sun
	5	*
	6	* This program is free software; you can redistribute it and/or modify
	7	* it under the terms of the GNU General Public License as published by
	8	* the Free Software Foundation; either version 2 of the License, or
	9	* (at your option) any later version.
	10	*
	11	* This program is distributed in the hope that it will be useful,
	12	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	13	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	14	* GNU General Public License for more details.
	15	*
	16	* You should have received a copy of the GNU General Public License
	17	* along with this program; if not, write to the Free Software
	18	* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
	19	*/
	20
6902f523	21	#include <linux/types.h>
2f8163ba	22	#include <linux/gpio.h>
6902f523 AV	23	#include <linux/init.h>
	24	#include <linux/mm.h>
	25	#include <linux/module.h>
	26	#include <linux/platform_device.h>
	27
a09e64fb	28	#include <mach/hardware.h>
6902f523 AV	29	#include <asm/setup.h>
	30	#include <asm/mach-types.h>
	31	#include <asm/irq.h>
	32
	33	#include <asm/mach/arch.h>
	34	#include <asm/mach/map.h>
	35	#include <asm/mach/irq.h>
	36
a09e64fb	37	#include <mach/board.h>
3e135466	38	#include <mach/at91_aic.h>
e57556e3	39	#include <mach/cpu.h>
6902f523 AV	40
	41	#include "generic.h"
	42
6902f523	43
1b021a3b	44	static void __init kafa_init_early(void)
6902f523	45	{
e57556e3 JCPV	46	/* Set cpu type: PQFP */
	47	at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
	48
2eeaaa21	49	/* Initialize processor: 18.432 MHz crystal */
21d08b9d	50	at91_initialize(18432000);
6902f523 AV	51	}
6902f523 AV	52
84e0cdb0	53	static struct macb_platform_data __initdata kafa_eth_data = {
6902f523 AV	54	.phy_irq_pin = AT91_PIN_PC4,
	55	.is_rmii = 0,
	56	};
	57
	58	static struct at91_usbh_data __initdata kafa_usbh_data = {
	59	.ports = 1,
63b4c296 JCPV	60	.vbus_pin = {-EINVAL, -EINVAL},
63b4c296 JCPV	61	.overcurrent_pin= {-EINVAL, -EINVAL},
6902f523 AV	62	};
	63
	64	static struct at91_udc_data __initdata kafa_udc_data = {
	65	.vbus_pin = AT91_PIN_PB6,
	66	.pullup_pin = AT91_PIN_PB7,
	67	};
	68
	69	static void __init kafa_board_init(void)
	70	{
7eb1dbb3 JCPV	71	/* Set up the LEDs */
	72	at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
	73
6902f523	74	/* Serial */
71b149b3 JCPV	75	/* DBGU on ttyS0. (Rx & Tx only) */
	76	at91_register_uart(0, 0, 0);
	77
	78	/* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
	79	at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS \| ATMEL_UART_RTS);
6902f523 AV	80	at91_add_device_serial();
	81	/* Ethernet */
	82	at91_add_device_eth(&kafa_eth_data);
	83	/* USB Host */
	84	at91_add_device_usbh(&kafa_usbh_data);
	85	/* USB Device */
	86	at91_add_device_udc(&kafa_udc_data);
	87	/* I2C */
f230d3f5	88	at91_add_device_i2c(NULL, 0);
6902f523 AV	89	/* SPI */
	90	at91_add_device_spi(NULL, 0);
	91	}
	92
	93	MACHINE_START(KAFA, "Sperry-Sun KAFA")
	94	/* Maintainer: Sergei Sharonov */
6902f523	95	.timer = &at91rm9200_timer,
21d08b9d	96	.map_io = at91_map_io,
3e135466	97	.handle_irq = at91_aic_handle_irq,
1b021a3b	98	.init_early = kafa_init_early,
92100c12	99	.init_irq = at91_init_irq_default,
6902f523 AV	100	.init_machine = kafa_board_init,
6902f523 AV	101	MACHINE_END