[deliverable/linux.git] / arch / arm / mach-davinci / Kconfig

if ARCH_DAVINCI

config AINTC
	bool

config CP_INTC
	bool
	select IRQ_DOMAIN

config ARCH_DAVINCI_DMx
	bool
	select CPU_ARM926T

menu "TI DaVinci Implementations"

comment "DaVinci Core Type"

config ARCH_DAVINCI_DM644x
	bool "DaVinci 644x based system"
	select AINTC
	select ARCH_DAVINCI_DMx

config ARCH_DAVINCI_DM355
	bool "DaVinci 355 based system"
	select AINTC
	select ARCH_DAVINCI_DMx

config ARCH_DAVINCI_DM646x
	bool "DaVinci 646x based system"
	select AINTC
	select ARCH_DAVINCI_DMx

config ARCH_DAVINCI_DA830
	bool "DA830/OMAP-L137/AM17x based system"
	depends on !ARCH_DAVINCI_DMx || AUTO_ZRELADDR
	select ARCH_DAVINCI_DA8XX
	# needed on silicon revs 1.0, 1.1:
	select CPU_DCACHE_WRITETHROUGH if !CPU_DCACHE_DISABLE
	select CP_INTC

config ARCH_DAVINCI_DA850
	bool "DA850/OMAP-L138/AM18x based system"
	depends on !ARCH_DAVINCI_DMx || AUTO_ZRELADDR
	select ARCH_DAVINCI_DA8XX
	select CP_INTC

config ARCH_DAVINCI_DA8XX
	bool
	select CPU_ARM926T

config ARCH_DAVINCI_DM365
	bool "DaVinci 365 based system"
	select AINTC
	select ARCH_DAVINCI_DMx

comment "DaVinci Board Type"

config MACH_DA8XX_DT
	bool "Support DA8XX platforms using device tree"
	default y
	depends on ARCH_DAVINCI_DA8XX
	select PINCTRL
	help
	  Say y here to include support for TI DaVinci DA850 based using
	  Flattened Device Tree. More information at Documentation/devicetree

config MACH_DAVINCI_EVM
	bool "TI DM644x EVM"
	default ARCH_DAVINCI_DM644x
	depends on ARCH_DAVINCI_DM644x
	select EEPROM_AT24
	select I2C
	help
	  Configure this option to specify the whether the board used
	  for development is a DM644x EVM

config MACH_SFFSDR
	bool "Lyrtech SFFSDR"
	depends on ARCH_DAVINCI_DM644x
	select EEPROM_AT24
	select I2C
	help
	  Say Y here to select the Lyrtech Small Form Factor
	  Software Defined Radio (SFFSDR) board.

config MACH_NEUROS_OSD2
	bool "Neuros OSD2 Open Television Set Top Box"
	depends on ARCH_DAVINCI_DM644x
	help
	  Configure this option to specify the whether the board used
	  for development is a Neuros OSD2 Open Set Top Box.

config MACH_DAVINCI_DM355_EVM
	bool "TI DM355 EVM"
	default ARCH_DAVINCI_DM355
	depends on ARCH_DAVINCI_DM355
	help
	  Configure this option to specify the whether the board used
	  for development is a DM355 EVM

config MACH_DM355_LEOPARD
	bool "DM355 Leopard board"
	depends on ARCH_DAVINCI_DM355
	help
	  Configure this option to specify the whether the board used
	  for development is a DM355 Leopard board.

config MACH_DAVINCI_DM6467_EVM
	bool "TI DM6467 EVM"
	default ARCH_DAVINCI_DM646x
	depends on ARCH_DAVINCI_DM646x
	select EEPROM_AT24
	select I2C
	select MACH_DAVINCI_DM6467TEVM
	help
	  Configure this option to specify the whether the board used
	  for development is a DM6467 EVM

config MACH_DAVINCI_DM6467TEVM
	bool

config MACH_DAVINCI_DM365_EVM
	bool "TI DM365 EVM"
	default ARCH_DAVINCI_DM365
	depends on ARCH_DAVINCI_DM365
	select EEPROM_AT24
	select I2C
	help
	  Configure this option to specify whether the board used
	  for development is a DM365 EVM

config MACH_DAVINCI_DA830_EVM
	bool "TI DA830/OMAP-L137/AM17x Reference Platform"
	default ARCH_DAVINCI_DA830
	depends on ARCH_DAVINCI_DA830
	select EEPROM_AT24
	select GPIO_PCF857X
	select I2C
	help
	  Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.

choice
	prompt "Select DA830/OMAP-L137/AM17x UI board peripheral"
	depends on MACH_DAVINCI_DA830_EVM
	help
	  The presence of UI card on the DA830/OMAP-L137/AM17x EVM is
	  detected automatically based on successful probe of the I2C
	  based GPIO expander on that board. This option selected in this
	  menu has an effect only in case of a successful UI card detection.

config DA830_UI_LCD
	bool "LCD"
	help
	  Say Y here to use the LCD as a framebuffer or simple character
	  display.

config DA830_UI_NAND
	bool "NAND flash"
	help
	  Say Y here to use the NAND flash. Do not forget to setup
	  the switch correctly.
endchoice

config MACH_DAVINCI_DA850_EVM
	bool "TI DA850/OMAP-L138/AM18x Reference Platform"
	default ARCH_DAVINCI_DA850
	depends on ARCH_DAVINCI_DA850
	help
	  Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module.

choice
	prompt "Select peripherals connected to expander on UI board"
	depends on MACH_DAVINCI_DA850_EVM
	help
	  The presence of User Interface (UI) card on the DA850/OMAP-L138/AM18x
	  EVM is detected automatically based on successful probe of the I2C
	  based GPIO expander on that card. This option selected in this
	  menu has an effect only in case of a successful UI card detection.

config DA850_UI_NONE
	bool "No peripheral is enabled"
	help
	  Say Y if you do not want to enable any of the peripherals connected
	  to TCA6416 expander on DA850/OMAP-L138/AM18x EVM UI card

config DA850_UI_RMII
	bool "RMII Ethernet PHY"
	help
	  Say Y if you want to use the RMII PHY on the DA850/OMAP-L138/AM18x
	  EVM. This PHY is found on the UI daughter card that is supplied with
	  the EVM.
	  NOTE: Please take care while choosing this option, MII PHY will
	  not be functional if RMII mode is selected.

config DA850_UI_SD_VIDEO_PORT
	bool "Video Port Interface"
	help
	  Say Y if you want to use Video Port Interface (VPIF) on the
	  DA850/OMAP-L138 EVM. The Video decoders/encoders are found on the
	  UI daughter card that is supplied with the EVM.

endchoice

config MACH_MITYOMAPL138
	bool "Critical Link MityDSP-L138/MityARM-1808 SoM"
	depends on ARCH_DAVINCI_DA850
	select EEPROM_AT24
	select I2C
	help
	  Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
	  System on Module.  Information on this SoM may be found at
	  http://www.mitydsp.com

config MACH_OMAPL138_HAWKBOARD
	bool "TI AM1808 / OMAPL-138 Hawkboard platform"
	depends on ARCH_DAVINCI_DA850
	help
	  Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform .
	  Information of this board may be found at
	  http://www.hawkboard.org/

config DAVINCI_MUX
	bool "DAVINCI multiplexing support"
	depends on ARCH_DAVINCI
	default y
	help
	  Pin multiplexing support for DAVINCI boards. If your bootloader
	  sets the multiplexing correctly, say N. Otherwise, or if unsure,
	  say Y.

config DAVINCI_MUX_DEBUG
	bool "Multiplexing debug output"
	depends on DAVINCI_MUX
	help
	  Makes the multiplexing functions print out a lot of debug info.
	  This is useful if you want to find out the correct values of the
	  multiplexing registers.

config DAVINCI_MUX_WARNINGS
	bool "Warn about pins the bootloader didn't set up"
	depends on DAVINCI_MUX
	help
	  Choose Y here to warn whenever driver initialization logic needs
	  to change the pin multiplexing setup. When there are no warnings
	  printed, it's safe to deselect DAVINCI_MUX for your product.

config DAVINCI_RESET_CLOCKS
	bool "Reset unused clocks during boot"
	depends on ARCH_DAVINCI
	help
	  Say Y if you want to reset unused clocks during boot.
	  This option saves power, but assumes all drivers are
	  using the clock framework. Broken drivers that do not
	  yet use clock framework may not work with this option.
	  If you are booting from another operating system, you
	  probably do not want this option enabled until your
	  device drivers work properly.

endmenu

endif
Commit	Line	Data
7c6337e2 KH	1	if ARCH_DAVINCI
7c6337e2 KH	2
0b0c4c2a MG	3	config AINTC
	4	bool
	5
0521444d SS	6	config CP_INTC
0521444d SS	7	bool
b1b3f49c	8	select IRQ_DOMAIN
0521444d	9
55c79a40 MG	10	config ARCH_DAVINCI_DMx
55c79a40 MG	11	bool
b1b3f49c	12	select CPU_ARM926T
55c79a40	13
7c6337e2 KH	14	menu "TI DaVinci Implementations"
	15
	16	comment "DaVinci Core Type"
	17
d0e47fba	18	config ARCH_DAVINCI_DM644x
7c6337e2	19	bool "DaVinci 644x based system"
0b0c4c2a	20	select AINTC
55c79a40	21	select ARCH_DAVINCI_DMx
7c6337e2	22
95a3477f	23	config ARCH_DAVINCI_DM355
a7884f45	24	bool "DaVinci 355 based system"
0b0c4c2a	25	select AINTC
55c79a40	26	select ARCH_DAVINCI_DMx
95a3477f	27
e38d92fd	28	config ARCH_DAVINCI_DM646x
a7884f45	29	bool "DaVinci 646x based system"
0b0c4c2a	30	select AINTC
55c79a40 MG	31	select ARCH_DAVINCI_DMx
	32
	33	config ARCH_DAVINCI_DA830
48ea89ea	34	bool "DA830/OMAP-L137/AM17x based system"
99bd667a	35	depends on !ARCH_DAVINCI_DMx \|\| AUTO_ZRELADDR
55c79a40	36	select ARCH_DAVINCI_DA8XX
1b50b0c1 AB	37	# needed on silicon revs 1.0, 1.1:
1b50b0c1 AB	38	select CPU_DCACHE_WRITETHROUGH if !CPU_DCACHE_DISABLE
b1b3f49c	39	select CP_INTC
55c79a40	40
e1a8d7e2	41	config ARCH_DAVINCI_DA850
48ea89ea	42	bool "DA850/OMAP-L138/AM18x based system"
99bd667a	43	depends on !ARCH_DAVINCI_DMx \|\| AUTO_ZRELADDR
e1a8d7e2	44	select ARCH_DAVINCI_DA8XX
b1b3f49c	45	select CP_INTC
e1a8d7e2	46
55c79a40 MG	47	config ARCH_DAVINCI_DA8XX
55c79a40 MG	48	bool
b1b3f49c	49	select CPU_ARM926T
e38d92fd	50
a46e9e40 SP	51	config ARCH_DAVINCI_DM365
	52	bool "DaVinci 365 based system"
	53	select AINTC
	54	select ARCH_DAVINCI_DMx
	55
7c6337e2 KH	56	comment "DaVinci Board Type"
7c6337e2 KH	57
689e331f SN	58	config MACH_DA8XX_DT
	59	bool "Support DA8XX platforms using device tree"
	60	default y
	61	depends on ARCH_DAVINCI_DA8XX
1faaba3d	62	select PINCTRL
689e331f SN	63	help
	64	Say y here to include support for TI DaVinci DA850 based using
	65	Flattened Device Tree. More information at Documentation/devicetree
	66
7c6337e2	67	config MACH_DAVINCI_EVM
d0e47fba	68	bool "TI DM644x EVM"
f28f03bb	69	default ARCH_DAVINCI_DM644x
d0e47fba	70	depends on ARCH_DAVINCI_DM644x
22ca4668	71	select EEPROM_AT24
45b146d7	72	select I2C
7c6337e2 KH	73	help
7c6337e2 KH	74	Configure this option to specify the whether the board used
d0e47fba	75	for development is a DM644x EVM
7c6337e2	76
f5ce6a67 HV	77	config MACH_SFFSDR
f5ce6a67 HV	78	bool "Lyrtech SFFSDR"
f5ce6a67	79	depends on ARCH_DAVINCI_DM644x
22ca4668	80	select EEPROM_AT24
45b146d7	81	select I2C
f5ce6a67 HV	82	help
	83	Say Y here to select the Lyrtech Small Form Factor
	84	Software Defined Radio (SFFSDR) board.
5526b3f7	85
c16fe267 AP	86	config MACH_NEUROS_OSD2
	87	bool "Neuros OSD2 Open Television Set Top Box"
	88	depends on ARCH_DAVINCI_DM644x
	89	help
	90	Configure this option to specify the whether the board used
	91	for development is a Neuros OSD2 Open Set Top Box.
	92
95a3477f KH	93	config MACH_DAVINCI_DM355_EVM
95a3477f KH	94	bool "TI DM355 EVM"
f28f03bb	95	default ARCH_DAVINCI_DM355
95a3477f KH	96	depends on ARCH_DAVINCI_DM355
	97	help
	98	Configure this option to specify the whether the board used
	99	for development is a DM355 EVM
	100
	101	config MACH_DM355_LEOPARD
	102	bool "DM355 Leopard board"
95a3477f KH	103	depends on ARCH_DAVINCI_DM355
	104	help
	105	Configure this option to specify the whether the board used
	106	for development is a DM355 Leopard board.
	107
e38d92fd KH	108	config MACH_DAVINCI_DM6467_EVM
e38d92fd KH	109	bool "TI DM6467 EVM"
f28f03bb	110	default ARCH_DAVINCI_DM646x
e38d92fd	111	depends on ARCH_DAVINCI_DM646x
22ca4668	112	select EEPROM_AT24
45b146d7	113	select I2C
b1b3f49c	114	select MACH_DAVINCI_DM6467TEVM
e38d92fd KH	115	help
	116	Configure this option to specify the whether the board used
	117	for development is a DM6467 EVM
	118
c1978e1d SN	119	config MACH_DAVINCI_DM6467TEVM
	120	bool
	121
a46e9e40 SP	122	config MACH_DAVINCI_DM365_EVM
	123	bool "TI DM365 EVM"
	124	default ARCH_DAVINCI_DM365
	125	depends on ARCH_DAVINCI_DM365
22ca4668	126	select EEPROM_AT24
45b146d7	127	select I2C
a46e9e40 SP	128	help
	129	Configure this option to specify whether the board used
	130	for development is a DM365 EVM
	131
8593790d	132	config MACH_DAVINCI_DA830_EVM
48ea89ea	133	bool "TI DA830/OMAP-L137/AM17x Reference Platform"
8593790d MG	134	default ARCH_DAVINCI_DA830
8593790d MG	135	depends on ARCH_DAVINCI_DA830
22ca4668	136	select EEPROM_AT24
b1b3f49c	137	select GPIO_PCF857X
45b146d7	138	select I2C
8593790d	139	help
48ea89ea	140	Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
e38d92fd	141
13e1f044	142	choice
48ea89ea	143	prompt "Select DA830/OMAP-L137/AM17x UI board peripheral"
77316f05 SN	144	depends on MACH_DAVINCI_DA830_EVM
77316f05 SN	145	help
48ea89ea SN	146	The presence of UI card on the DA830/OMAP-L137/AM17x EVM is
	147	detected automatically based on successful probe of the I2C
	148	based GPIO expander on that board. This option selected in this
	149	menu has an effect only in case of a successful UI card detection.
13e1f044 SC	150
	151	config DA830_UI_LCD
	152	bool "LCD"
	153	help
	154	Say Y here to use the LCD as a framebuffer or simple character
	155	display.
	156
733975a3 DG	157	config DA830_UI_NAND
	158	bool "NAND flash"
	159	help
a7884f45	160	Say Y here to use the NAND flash. Do not forget to setup
733975a3	161	the switch correctly.
13e1f044 SC	162	endchoice
13e1f044 SC	163
0fbc5592	164	config MACH_DAVINCI_DA850_EVM
48ea89ea	165	bool "TI DA850/OMAP-L138/AM18x Reference Platform"
0fbc5592 SR	166	default ARCH_DAVINCI_DA850
0fbc5592 SR	167	depends on ARCH_DAVINCI_DA850
2206771c	168	help
48ea89ea	169	Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module.
2206771c C	170
	171	choice
	172	prompt "Select peripherals connected to expander on UI board"
797d799e SN	173	depends on MACH_DAVINCI_DA850_EVM
797d799e SN	174	help
48ea89ea	175	The presence of User Interface (UI) card on the DA850/OMAP-L138/AM18x
797d799e SN	176	EVM is detected automatically based on successful probe of the I2C
	177	based GPIO expander on that card. This option selected in this
	178	menu has an effect only in case of a successful UI card detection.
2206771c C	179
	180	config DA850_UI_NONE
	181	bool "No peripheral is enabled"
	182	help
	183	Say Y if you do not want to enable any of the peripherals connected
48ea89ea	184	to TCA6416 expander on DA850/OMAP-L138/AM18x EVM UI card
2206771c C	185
	186	config DA850_UI_RMII
	187	bool "RMII Ethernet PHY"
	188	help
48ea89ea SN	189	Say Y if you want to use the RMII PHY on the DA850/OMAP-L138/AM18x
48ea89ea SN	190	EVM. This PHY is found on the UI daughter card that is supplied with
2206771c C	191	the EVM.
	192	NOTE: Please take care while choosing this option, MII PHY will
	193	not be functional if RMII mode is selected.
	194
1e046d17 MH	195	config DA850_UI_SD_VIDEO_PORT
	196	bool "Video Port Interface"
	197	help
	198	Say Y if you want to use Video Port Interface (VPIF) on the
	199	DA850/OMAP-L138 EVM. The Video decoders/encoders are found on the
	200	UI daughter card that is supplied with the EVM.
	201
2206771c C	202	endchoice
2206771c C	203
f2dbb6d9 MW	204	config MACH_MITYOMAPL138
	205	bool "Critical Link MityDSP-L138/MityARM-1808 SoM"
	206	depends on ARCH_DAVINCI_DA850
22ca4668	207	select EEPROM_AT24
45b146d7	208	select I2C
f2dbb6d9 MW	209	help
	210	Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
	211	System on Module. Information on this SoM may be found at
	212	http://www.mitydsp.com
	213
6c18c91b VR	214	config MACH_OMAPL138_HAWKBOARD
	215	bool "TI AM1808 / OMAPL-138 Hawkboard platform"
	216	depends on ARCH_DAVINCI_DA850
	217	help
	218	Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform .
	219	Information of this board may be found at
	220	http://www.hawkboard.org/
	221
5526b3f7 KH	222	config DAVINCI_MUX
	223	bool "DAVINCI multiplexing support"
	224	depends on ARCH_DAVINCI
	225	default y
	226	help
	227	Pin multiplexing support for DAVINCI boards. If your bootloader
	228	sets the multiplexing correctly, say N. Otherwise, or if unsure,
	229	say Y.
	230
	231	config DAVINCI_MUX_DEBUG
a7884f45 SN	232	bool "Multiplexing debug output"
	233	depends on DAVINCI_MUX
	234	help
	235	Makes the multiplexing functions print out a lot of debug info.
	236	This is useful if you want to find out the correct values of the
	237	multiplexing registers.
5526b3f7 KH	238
5526b3f7 KH	239	config DAVINCI_MUX_WARNINGS
a7884f45 SN	240	bool "Warn about pins the bootloader didn't set up"
	241	depends on DAVINCI_MUX
	242	help
	243	Choose Y here to warn whenever driver initialization logic needs
	244	to change the pin multiplexing setup. When there are no warnings
	245	printed, it's safe to deselect DAVINCI_MUX for your product.
5526b3f7	246
c5b736d0 KH	247	config DAVINCI_RESET_CLOCKS
	248	bool "Reset unused clocks during boot"
	249	depends on ARCH_DAVINCI
	250	help
	251	Say Y if you want to reset unused clocks during boot.
	252	This option saves power, but assumes all drivers are
	253	using the clock framework. Broken drivers that do not
	254	yet use clock framework may not work with this option.
	255	If you are booting from another operating system, you
	256	probably do not want this option enabled until your
	257	device drivers work properly.
	258
7c6337e2 KH	259	endmenu
	260
	261	endif