[ARM] 5590/1: Add basic support for ST Nomadik 8815 SoC and evaluation board
[deliverable/linux.git] / arch / arm / mach-davinci / board-sffsdr.c
CommitLineData
f5ce6a67
HV
1/*
2 * Lyrtech SFFSDR board support.
3 *
4 * Copyright (C) 2008 Philip Balister, OpenSDR <philip@opensdr.com>
5 * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
6 *
7 * Based on DV-EVM platform, original copyright follows:
8 *
9 * Copyright (C) 2007 MontaVista Software, Inc.
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or
14 * (at your option) any later version.
15 *
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
20 *
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, write to the Free Software
23 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
24 */
25
26#include <linux/kernel.h>
27#include <linux/module.h>
28#include <linux/init.h>
29#include <linux/dma-mapping.h>
30#include <linux/platform_device.h>
31#include <linux/gpio.h>
32
33#include <linux/i2c.h>
34#include <linux/i2c/at24.h>
35#include <linux/etherdevice.h>
36#include <linux/mtd/mtd.h>
37#include <linux/mtd/nand.h>
38#include <linux/mtd/partitions.h>
39#include <linux/mtd/physmap.h>
40#include <linux/io.h>
41
42#include <asm/setup.h>
43#include <asm/mach-types.h>
44
45#include <asm/mach/arch.h>
46#include <asm/mach/map.h>
47#include <asm/mach/flash.h>
48
49#include <mach/dm644x.h>
50#include <mach/common.h>
51#include <mach/i2c.h>
52#include <mach/serial.h>
53#include <mach/psc.h>
54#include <mach/mux.h>
79c3c0b7 55#include <mach/common.h>
f5ce6a67 56
ac7b75b5
KH
57#define SFFSDR_PHY_MASK (0x2)
58#define SFFSDR_MDIO_FREQUENCY (2200000) /* PHY bus frequency */
59
f5ce6a67
HV
60#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e00000
61#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
62
63struct mtd_partition davinci_sffsdr_nandflash_partition[] = {
64 /* U-Boot Environment: Block 0
65 * UBL: Block 1
66 * U-Boot: Blocks 6-7 (256 kb)
67 * Integrity Kernel: Blocks 8-31 (3 Mb)
68 * Integrity Data: Blocks 100-END
69 */
70 {
71 .name = "Linux Kernel",
72 .offset = 32 * SZ_128K,
73 .size = 16 * SZ_128K, /* 2 Mb */
74 .mask_flags = MTD_WRITEABLE, /* Force read-only */
75 },
76 {
77 .name = "Linux ROOT",
78 .offset = MTDPART_OFS_APPEND,
79 .size = 256 * SZ_128K, /* 32 Mb */
80 .mask_flags = 0, /* R/W */
81 },
82};
83
84static struct flash_platform_data davinci_sffsdr_nandflash_data = {
85 .parts = davinci_sffsdr_nandflash_partition,
86 .nr_parts = ARRAY_SIZE(davinci_sffsdr_nandflash_partition),
87};
88
89static struct resource davinci_sffsdr_nandflash_resource[] = {
90 {
91 .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
92 .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
93 .flags = IORESOURCE_MEM,
94 }, {
95 .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE,
96 .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
97 .flags = IORESOURCE_MEM,
98 },
99};
100
101static struct platform_device davinci_sffsdr_nandflash_device = {
102 .name = "davinci_nand", /* Name of driver */
103 .id = 0,
104 .dev = {
105 .platform_data = &davinci_sffsdr_nandflash_data,
106 },
107 .num_resources = ARRAY_SIZE(davinci_sffsdr_nandflash_resource),
108 .resource = davinci_sffsdr_nandflash_resource,
109};
110
ac7b75b5
KH
111static struct emac_platform_data sffsdr_emac_pdata = {
112 .phy_mask = SFFSDR_PHY_MASK,
113 .mdio_max_freq = SFFSDR_MDIO_FREQUENCY,
114};
f5ce6a67
HV
115
116static struct at24_platform_data eeprom_info = {
117 .byte_len = (64*1024) / 8,
118 .page_size = 32,
119 .flags = AT24_FLAG_ADDR16,
120};
121
122static struct i2c_board_info __initdata i2c_info[] = {
123 {
124 I2C_BOARD_INFO("24lc64", 0x50),
125 .platform_data = &eeprom_info,
126 },
127 /* Other I2C devices:
128 * MSP430, addr 0x23 (not used)
129 * PCA9543, addr 0x70 (setup done by U-Boot)
130 * ADS7828, addr 0x48 (ADC for voltage monitoring.)
131 */
132};
133
134static struct davinci_i2c_platform_data i2c_pdata = {
135 .bus_freq = 20 /* kHz */,
136 .bus_delay = 100 /* usec */,
137};
138
139static void __init sffsdr_init_i2c(void)
140{
141 davinci_init_i2c(&i2c_pdata);
142 i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
143}
144
145static struct platform_device *davinci_sffsdr_devices[] __initdata = {
146 &davinci_sffsdr_nandflash_device,
147};
148
149static struct davinci_uart_config uart_config __initdata = {
150 .enabled_uarts = (1 << 0),
151};
152
153static void __init davinci_sffsdr_map_io(void)
154{
f5ce6a67
HV
155 dm644x_init();
156}
157
158static __init void davinci_sffsdr_init(void)
159{
972412b6
MG
160 struct davinci_soc_info *soc_info = &davinci_soc_info;
161
f5ce6a67
HV
162 platform_add_devices(davinci_sffsdr_devices,
163 ARRAY_SIZE(davinci_sffsdr_devices));
164 sffsdr_init_i2c();
165 davinci_serial_init(&uart_config);
972412b6
MG
166 soc_info->emac_pdata->phy_mask = SFFSDR_PHY_MASK;
167 soc_info->emac_pdata->mdio_max_freq = SFFSDR_MDIO_FREQUENCY;
f5ce6a67
HV
168 setup_usb(0, 0); /* We support only peripheral mode. */
169
170 /* mux VLYNQ pins */
171 davinci_cfg_reg(DM644X_VLYNQEN);
172 davinci_cfg_reg(DM644X_VLYNQWD);
173}
174
175static __init void davinci_sffsdr_irq_init(void)
176{
177 davinci_irq_init();
178}
179
180MACHINE_START(SFFSDR, "Lyrtech SFFSDR")
181 /* Maintainer: Hugo Villeneuve hugo.villeneuve@lyrtech.com */
182 .phys_io = IO_PHYS,
183 .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
184 .boot_params = (DAVINCI_DDR_BASE + 0x100),
185 .map_io = davinci_sffsdr_map_io,
186 .init_irq = davinci_sffsdr_irq_init,
187 .timer = &davinci_timer,
188 .init_machine = davinci_sffsdr_init,
189MACHINE_END
This page took 0.040279 seconds and 5 git commands to generate.