[deliverable/linux.git] / arch / arm / mach-ep93xx / micro9.c

/*
 *  linux/arch/arm/mach-ep93xx/micro9.c
 *
 * Copyright (C) 2006 Contec Steuerungstechnik & Automation GmbH
 *                   Manfred Gruber <manfred.gruber@contec.at>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>

#include <mach/hardware.h>

#include <asm/mach-types.h>
#include <asm/mach/arch.h>


static struct ep93xx_eth_data micro9_eth_data = {
	.phy_id		= 0x1f,
};

static void __init micro9_init(void)
{
	ep93xx_register_eth(&micro9_eth_data, 1);
}

/*
 * Micro9-H
 */
#ifdef CONFIG_MACH_MICRO9H
static struct physmap_flash_data micro9h_flash_data = {
	.width		= 4,
};

static struct resource micro9h_flash_resource = {
	.start		= EP93XX_CS1_PHYS_BASE,
	.end		= EP93XX_CS1_PHYS_BASE + SZ_64M - 1,
	.flags		= IORESOURCE_MEM,
};

static struct platform_device micro9h_flash = {
	.name		= "physmap-flash",
	.id		= 0,
	.dev		= {
		.platform_data	= &micro9h_flash_data,
	},
	.num_resources	= 1,
	.resource	= &micro9h_flash_resource,
};

static void __init micro9h_init(void)
{
	platform_device_register(&micro9h_flash);
}

static void __init micro9h_init_machine(void)
{
	ep93xx_init_devices();
	micro9_init();
	micro9h_init();
}

MACHINE_START(MICRO9, "Contec Hypercontrol Micro9-H")
	/* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
	.phys_io	= EP93XX_APB_PHYS_BASE,
	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
	.map_io		= ep93xx_map_io,
	.init_irq	= ep93xx_init_irq,
	.timer		= &ep93xx_timer,
	.init_machine	= micro9h_init_machine,
MACHINE_END
#endif

/*
 * Micro9-M
 */
#ifdef CONFIG_MACH_MICRO9M
static void __init micro9m_init_machine(void)
{
	ep93xx_init_devices();
	micro9_init();
}

MACHINE_START(MICRO9M, "Contec Hypercontrol Micro9-M")
	/* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
	.phys_io	= EP93XX_APB_PHYS_BASE,
	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
	.map_io		= ep93xx_map_io,
	.init_irq	= ep93xx_init_irq,
	.timer		= &ep93xx_timer,
	.init_machine	= micro9m_init_machine,
MACHINE_END
#endif

/*
 * Micro9-L
 */
#ifdef CONFIG_MACH_MICRO9L
static void __init micro9l_init_machine(void)
{
	ep93xx_init_devices();
	micro9_init();
}

MACHINE_START(MICRO9L, "Contec Hypercontrol Micro9-L")
	/* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
	.phys_io	= EP93XX_APB_PHYS_BASE,
	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
	.map_io		= ep93xx_map_io,
	.init_irq	= ep93xx_init_irq,
	.timer		= &ep93xx_timer,
	.init_machine	= micro9l_init_machine,
MACHINE_END
#endif
Commit	Line	Data
d941caa2 MG	1	/*
	2	* linux/arch/arm/mach-ep93xx/micro9.c
	3	*
	4	* Copyright (C) 2006 Contec Steuerungstechnik & Automation GmbH
	5	* Manfred Gruber <manfred.gruber@contec.at>
	6	*
	7	* This program is free software; you can redistribute it and/or modify
	8	* it under the terms of the GNU General Public License version 2 as
	9	* published by the Free Software Foundation.
	10	*/
	11
d941caa2	12	#include <linux/kernel.h>
583ddafe	13	#include <linux/init.h>
d941caa2	14	#include <linux/platform_device.h>
d941caa2 MG	15	#include <linux/mtd/physmap.h>
d941caa2 MG	16
a09e64fb	17	#include <mach/hardware.h>
d941caa2	18
d941caa2	19	#include <asm/mach-types.h>
583ddafe HS	20	#include <asm/mach/arch.h>
583ddafe HS	21
d941caa2 MG	22
d941caa2 MG	23	static struct ep93xx_eth_data micro9_eth_data = {
e48f3fa3	24	.phy_id = 0x1f,
d941caa2 MG	25	};
d941caa2 MG	26
d941caa2 MG	27	static void __init micro9_init(void)
d941caa2 MG	28	{
a0a08fdc	29	ep93xx_register_eth(&micro9_eth_data, 1);
d941caa2 MG	30	}
	31
	32	/*
	33	* Micro9-H
	34	*/
	35	#ifdef CONFIG_MACH_MICRO9H
	36	static struct physmap_flash_data micro9h_flash_data = {
e48f3fa3	37	.width = 4,
d941caa2 MG	38	};
	39
	40	static struct resource micro9h_flash_resource = {
e48f3fa3 HS	41	.start = EP93XX_CS1_PHYS_BASE,
	42	.end = EP93XX_CS1_PHYS_BASE + SZ_64M - 1,
	43	.flags = IORESOURCE_MEM,
d941caa2 MG	44	};
	45
	46	static struct platform_device micro9h_flash = {
e48f3fa3 HS	47	.name = "physmap-flash",
	48	.id = 0,
	49	.dev = {
	50	.platform_data = &micro9h_flash_data,
	51	},
	52	.num_resources = 1,
	53	.resource = &micro9h_flash_resource,
d941caa2 MG	54	};
	55
	56	static void __init micro9h_init(void)
	57	{
e48f3fa3	58	platform_device_register(&micro9h_flash);
d941caa2 MG	59	}
	60
	61	static void __init micro9h_init_machine(void)
	62	{
e48f3fa3 HS	63	ep93xx_init_devices();
	64	micro9_init();
	65	micro9h_init();
d941caa2 MG	66	}
	67
	68	MACHINE_START(MICRO9, "Contec Hypercontrol Micro9-H")
e48f3fa3 HS	69	/* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
	70	.phys_io = EP93XX_APB_PHYS_BASE,
	71	.io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
	72	.boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
	73	.map_io = ep93xx_map_io,
	74	.init_irq = ep93xx_init_irq,
	75	.timer = &ep93xx_timer,
	76	.init_machine = micro9h_init_machine,
d941caa2 MG	77	MACHINE_END
	78	#endif
	79
	80	/*
	81	* Micro9-M
	82	*/
	83	#ifdef CONFIG_MACH_MICRO9M
	84	static void __init micro9m_init_machine(void)
	85	{
e48f3fa3 HS	86	ep93xx_init_devices();
e48f3fa3 HS	87	micro9_init();
d941caa2 MG	88	}
	89
	90	MACHINE_START(MICRO9M, "Contec Hypercontrol Micro9-M")
e48f3fa3 HS	91	/* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
	92	.phys_io = EP93XX_APB_PHYS_BASE,
	93	.io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
	94	.boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
	95	.map_io = ep93xx_map_io,
	96	.init_irq = ep93xx_init_irq,
	97	.timer = &ep93xx_timer,
	98	.init_machine = micro9m_init_machine,
d941caa2 MG	99	MACHINE_END
	100	#endif
	101
	102	/*
	103	* Micro9-L
	104	*/
	105	#ifdef CONFIG_MACH_MICRO9L
	106	static void __init micro9l_init_machine(void)
	107	{
e48f3fa3 HS	108	ep93xx_init_devices();
e48f3fa3 HS	109	micro9_init();
d941caa2 MG	110	}
	111
	112	MACHINE_START(MICRO9L, "Contec Hypercontrol Micro9-L")
e48f3fa3 HS	113	/* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
	114	.phys_io = EP93XX_APB_PHYS_BASE,
	115	.io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
	116	.boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
	117	.map_io = ep93xx_map_io,
	118	.init_irq = ep93xx_init_irq,
	119	.timer = &ep93xx_timer,
	120	.init_machine = micro9l_init_machine,
d941caa2 MG	121	MACHINE_END
	122	#endif
	123