projects / deliverable / linux.git / blame
| Commit | Line | Data |
|---|---|---|
| c5a0d497 | 1 | config ARCH_MXC |
| 4cc3c840 | 2 | bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 |
| 5a1513f6 JT |
3 | select ARCH_HAS_CPUFREQ |
| 4 | select ARCH_HAS_OPP | |
| c5a0d497 | 5 | select ARCH_REQUIRE_GPIOLIB |
| f36b594f | 6 | select ARM_CPU_SUSPEND if PM |
| c5a0d497 | 7 | select CLKSRC_MMIO |
| c5a0d497 | 8 | select GENERIC_IRQ_CHIP |
| f7f3d4b2 | 9 | select PINCTRL |
| 5a1513f6 | 10 | select PM_OPP if PM |
| a2887546 | 11 | select SOC_BUS |
| 67f5b308 | 12 | select SRAM |
| c5a0d497 SG |
13 | help |
| 14 | Support for Freescale MXC/iMX-based family of processors | |
| 15 | ||
| 16 | menu "Freescale i.MX support" | |
| 17 | depends on ARCH_MXC | |
| 3995eb82 | 18 | |
| 3995eb82 SG |
19 | config MXC_TZIC |
| 20 | bool | |
| 21 | ||
| 22 | config MXC_AVIC | |
| 23 | bool | |
| 24 | ||
| 25 | config MXC_DEBUG_BOARD | |
| 26 | bool "Enable MXC debug board(for 3-stack)" | |
| 27 | help | |
| 28 | The debug board is an integral part of the MXC 3-stack(PDK) | |
| 29 | platforms, it can be attached or removed from the peripheral | |
| 30 | board. On debug board, several debug devices(ethernet, UART, | |
| 31 | buttons, LEDs and JTAG) are implemented. Between the MCU and | |
| 32 | these devices, a CPLD is added as a bridge which performs | |
| 33 | data/address de-multiplexing and decode, signal level shift, | |
| 34 | interrupt control and various board functions. | |
| 35 | ||
| 36 | config HAVE_EPIT | |
| 37 | bool | |
| 38 | ||
| 39 | config MXC_USE_EPIT | |
| 40 | bool "Use EPIT instead of GPT" | |
| 41 | depends on HAVE_EPIT | |
| 42 | help | |
| 43 | Use EPIT as the system timer on systems that have it. Normally you | |
| 44 | don't have a reason to do so as the EPIT has the same features and | |
| 45 | uses the same clocks as the GPT. Anyway, on some systems the GPT | |
| 46 | may be in use for other purposes. | |
| 47 | ||
| 3995eb82 SG |
48 | config ARCH_HAS_RNGA |
| 49 | bool | |
| 50 | ||
| e95dddb3 AH |
51 | config HAVE_IMX_ANATOP |
| 52 | bool | |
| 53 | ||
| 9fbbe689 SG |
54 | config HAVE_IMX_GPC |
| 55 | bool | |
| 56 | ||
| 57 | config HAVE_IMX_MMDC | |
| 58 | bool | |
| 59 | ||
| 60 | config HAVE_IMX_SRC | |
| 68b25325 | 61 | def_bool y if SMP |
| 02985b94 | 62 | select ARCH_HAS_RESET_CONTROLLER |
| 9fbbe689 | 63 | |
| 267dd34c SG |
64 | config IMX_HAVE_IOMUX_V1 |
| 65 | bool | |
| 66 | ||
| 67 | config ARCH_MXC_IOMUX_V3 | |
| 68 | bool | |
| 69 | ||
| ae4fa7f6 SH |
70 | config ARCH_MX1 |
| 71 | bool | |
| 72 | ||
| ae4fa7f6 SH |
73 | config ARCH_MX25 |
| 74 | bool | |
| 75 | ||
| 76 | config MACH_MX27 | |
| 77 | bool | |
| 78 | ||
| e780d239 | 79 | config SOC_IMX1 |
| e48ab1c1 | 80 | bool |
| ae4fa7f6 | 81 | select ARCH_MX1 |
| e780d239 UKK |
82 | select CPU_ARM920T |
| 83 | select IMX_HAVE_IOMUX_V1 | |
| c7259df3 | 84 | select MXC_AVIC |
| e48ab1c1 UKK |
85 | |
| 86 | config SOC_IMX21 | |
| 87 | bool | |
| b1b3f49c | 88 | select CPU_ARM926T |
| e48ab1c1 | 89 | select IMX_HAVE_IOMUX_V1 |
| c7259df3 | 90 | select MXC_AVIC |
| e48ab1c1 UKK |
91 | |
| 92 | config SOC_IMX25 | |
| e780d239 | 93 | bool |
| ae4fa7f6 | 94 | select ARCH_MX25 |
| b1b3f49c | 95 | select ARCH_MXC_IOMUX_V3 |
| e48ab1c1 | 96 | select CPU_ARM926T |
| c7259df3 | 97 | select MXC_AVIC |
| 5bcaa7a3 | 98 | select PINCTRL_IMX25 |
| e48ab1c1 UKK |
99 | |
| 100 | config SOC_IMX27 | |
| 101 | bool | |
| 68663104 MP |
102 | select ARCH_HAS_CPUFREQ |
| 103 | select ARCH_HAS_OPP | |
| b1b3f49c | 104 | select CPU_ARM926T |
| e48ab1c1 | 105 | select IMX_HAVE_IOMUX_V1 |
| b1b3f49c | 106 | select MACH_MX27 |
| c7259df3 | 107 | select MXC_AVIC |
| acb350e0 | 108 | select PINCTRL_IMX27 |
| e48ab1c1 | 109 | |
| 27ad4bf7 UKK |
110 | config SOC_IMX31 |
| 111 | bool | |
| 112 | select CPU_V6 | |
| 113 | select IMX_HAVE_PLATFORM_MXC_RNGA | |
| 27ad4bf7 | 114 | select MXC_AVIC |
| a89cf59b | 115 | select SMP_ON_UP if SMP |
| 27ad4bf7 UKK |
116 | |
| 117 | config SOC_IMX35 | |
| 118 | bool | |
| 27ad4bf7 | 119 | select ARCH_MXC_IOMUX_V3 |
| 27ad4bf7 | 120 | select HAVE_EPIT |
| 27ad4bf7 | 121 | select MXC_AVIC |
| c51bcd15 | 122 | select PINCTRL_IMX35 |
| a89cf59b | 123 | select SMP_ON_UP if SMP |
| 27ad4bf7 | 124 | |
| 784a90c0 | 125 | config SOC_IMX5 |
| b1b3f49c | 126 | bool |
| 784a90c0 | 127 | select ARCH_HAS_CPUFREQ |
| 68663104 | 128 | select ARCH_HAS_OPP |
| b1b3f49c | 129 | select ARCH_MXC_IOMUX_V3 |
| b1b3f49c | 130 | select MXC_TZIC |
| 784a90c0 | 131 | |
| 784a90c0 SH |
132 | config SOC_IMX51 |
| 133 | bool | |
| bd3d924d | 134 | select HAVE_IMX_SRC |
| b6798f88 | 135 | select PINCTRL_IMX51 |
| b1b3f49c | 136 | select SOC_IMX5 |
| 784a90c0 | 137 | |
| c5a0d497 | 138 | if ARCH_MULTI_V4T |
| e780d239 | 139 | |
| 07469495 UKK |
140 | comment "MX1 platforms:" |
| 141 | config MACH_MXLADS | |
| 142 | bool | |
| 143 | ||
| 144 | config ARCH_MX1ADS | |
| 145 | bool "MX1ADS platform" | |
| 6348e6b5 | 146 | select IMX_HAVE_PLATFORM_IMX_I2C |
| d112f4e4 | 147 | select IMX_HAVE_PLATFORM_IMX_UART |
| b1b3f49c RK |
148 | select MACH_MXLADS |
| 149 | select SOC_IMX1 | |
| 07469495 UKK |
150 | help |
| 151 | Say Y here if you are using Motorola MX1ADS/MXLADS boards | |
| 152 | ||
| 153 | config MACH_SCB9328 | |
| 154 | bool "Synertronixx scb9328" | |
| d112f4e4 | 155 | select IMX_HAVE_PLATFORM_IMX_UART |
| 123860e1 | 156 | select SOC_IMX1 |
| 07469495 UKK |
157 | help |
| 158 | Say Y here if you are using a Synertronixx scb9328 board | |
| 159 | ||
| 7fc92c60 GGM |
160 | config MACH_APF9328 |
| 161 | bool "APF9328" | |
| 7a994818 | 162 | select IMX_HAVE_PLATFORM_IMX_I2C |
| 7fc92c60 | 163 | select IMX_HAVE_PLATFORM_IMX_UART |
| b1b3f49c | 164 | select SOC_IMX1 |
| 7fc92c60 GGM |
165 | help |
| 166 | Say Yes here if you are using the Armadeus APF9328 development board | |
| 167 | ||
| c5a0d497 SG |
168 | endif |
| 169 | ||
| 170 | if ARCH_MULTI_V5 | |
| 171 | ||
| b6b06be0 | 172 | comment "MX21 platforms:" |
| 80eedae6 | 173 | |
| 6b91edde IC |
174 | config MACH_MX21ADS |
| 175 | bool "MX21ADS platform" | |
| ad851bff | 176 | select IMX_HAVE_PLATFORM_IMX_FB |
| 3c5227fd | 177 | select IMX_HAVE_PLATFORM_IMX_UART |
| 9d3d945a | 178 | select IMX_HAVE_PLATFORM_MXC_MMC |
| 1f8d721c | 179 | select IMX_HAVE_PLATFORM_MXC_NAND |
| b1b3f49c | 180 | select SOC_IMX21 |
| 6b91edde IC |
181 | help |
| 182 | Include support for MX21ADS platform. This includes specific | |
| 183 | configurations for the board and its peripherals. | |
| 184 | ||
| e48ab1c1 UKK |
185 | comment "MX25 platforms:" |
| 186 | ||
| 187 | config MACH_MX25_3DS | |
| 188 | bool "Support MX25PDK (3DS) Platform" | |
| 91dcc7f4 | 189 | select IMX_HAVE_PLATFORM_FLEXCAN |
| 460d30a3 | 190 | select IMX_HAVE_PLATFORM_FSL_USB2_UDC |
| e48ab1c1 UKK |
191 | select IMX_HAVE_PLATFORM_IMX2_WDT |
| 192 | select IMX_HAVE_PLATFORM_IMXDI_RTC | |
| 193 | select IMX_HAVE_PLATFORM_IMX_FB | |
| b1b3f49c | 194 | select IMX_HAVE_PLATFORM_IMX_I2C |
| e48ab1c1 UKK |
195 | select IMX_HAVE_PLATFORM_IMX_KEYPAD |
| 196 | select IMX_HAVE_PLATFORM_IMX_UART | |
| 197 | select IMX_HAVE_PLATFORM_MXC_EHCI | |
| 198 | select IMX_HAVE_PLATFORM_MXC_NAND | |
| 124bf94a | 199 | select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX |
| b1b3f49c | 200 | select SOC_IMX25 |
| e48ab1c1 | 201 | |
| 01dd520a | 202 | config MACH_EUKREA_CPUIMX25SD |
| e48ab1c1 | 203 | bool "Support Eukrea CPUIMX25 Platform" |
| e48ab1c1 UKK |
204 | select IMX_HAVE_PLATFORM_FLEXCAN |
| 205 | select IMX_HAVE_PLATFORM_FSL_USB2_UDC | |
| 4692cba1 | 206 | select IMX_HAVE_PLATFORM_IMX2_WDT |
| e48ab1c1 UKK |
207 | select IMX_HAVE_PLATFORM_IMXDI_RTC |
| 208 | select IMX_HAVE_PLATFORM_IMX_FB | |
| 209 | select IMX_HAVE_PLATFORM_IMX_I2C | |
| 210 | select IMX_HAVE_PLATFORM_IMX_UART | |
| 211 | select IMX_HAVE_PLATFORM_MXC_EHCI | |
| 212 | select IMX_HAVE_PLATFORM_MXC_NAND | |
| 124bf94a | 213 | select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX |
| 794987ac | 214 | select USB_ULPI_VIEWPORT if USB_ULPI |
| b1b3f49c | 215 | select SOC_IMX25 |
| e48ab1c1 UKK |
216 | |
| 217 | choice | |
| 218 | prompt "Baseboard" | |
| 01dd520a | 219 | depends on MACH_EUKREA_CPUIMX25SD |
| e48ab1c1 UKK |
220 | default MACH_EUKREA_MBIMXSD25_BASEBOARD |
| 221 | ||
| 222 | config MACH_EUKREA_MBIMXSD25_BASEBOARD | |
| 223 | bool "Eukrea MBIMXSD development board" | |
| 5309498a | 224 | select IMX_HAVE_PLATFORM_GPIO_KEYS |
| e48ab1c1 | 225 | select IMX_HAVE_PLATFORM_IMX_SSI |
| 49ed9407 | 226 | select IMX_HAVE_PLATFORM_SPI_IMX |
| 47e837b5 | 227 | select LEDS_GPIO_REGISTER |
| e48ab1c1 UKK |
228 | help |
| 229 | This adds board specific devices that can be found on Eukrea's | |
| 230 | MBIMXSD evaluation board. | |
| 231 | ||
| 232 | endchoice | |
| 233 | ||
| ef4bac55 SH |
234 | config MACH_IMX25_DT |
| 235 | bool "Support i.MX25 platforms from device tree" | |
| 236 | select SOC_IMX25 | |
| 237 | help | |
| 238 | Include support for Freescale i.MX25 based platforms | |
| 239 | using the device tree for discovery | |
| 240 | ||
| b6b06be0 UKK |
241 | comment "MX27 platforms:" |
| 242 | ||
| 80eedae6 JB |
243 | config MACH_MX27ADS |
| 244 | bool "MX27ADS platform" | |
| ad851bff | 245 | select IMX_HAVE_PLATFORM_IMX_FB |
| c6987159 | 246 | select IMX_HAVE_PLATFORM_IMX_I2C |
| d5dac4a6 | 247 | select IMX_HAVE_PLATFORM_IMX_UART |
| 9d3d945a | 248 | select IMX_HAVE_PLATFORM_MXC_MMC |
| 0e7a29a8 | 249 | select IMX_HAVE_PLATFORM_MXC_NAND |
| ae71a562 | 250 | select IMX_HAVE_PLATFORM_MXC_W1 |
| b1b3f49c | 251 | select SOC_IMX27 |
| 80eedae6 JB |
252 | help |
| 253 | Include support for MX27ADS platform. This includes specific | |
| 254 | configurations for the board and its peripherals. | |
| 7e5e9f54 JB |
255 | |
| 256 | config MACH_PCM038 | |
| 257 | bool "Phytec phyCORE-i.MX27 CPU module (pcm038)" | |
| e0a1961d | 258 | select IMX_HAVE_PLATFORM_IMX2_WDT |
| c6987159 | 259 | select IMX_HAVE_PLATFORM_IMX_I2C |
| d5dac4a6 | 260 | select IMX_HAVE_PLATFORM_IMX_UART |
| 2eb42d5c | 261 | select IMX_HAVE_PLATFORM_MXC_EHCI |
| 0e7a29a8 | 262 | select IMX_HAVE_PLATFORM_MXC_NAND |
| ae71a562 | 263 | select IMX_HAVE_PLATFORM_MXC_W1 |
| 7536cf99 | 264 | select IMX_HAVE_PLATFORM_SPI_IMX |
| 794987ac | 265 | select USB_ULPI_VIEWPORT if USB_ULPI |
| b1b3f49c | 266 | select SOC_IMX27 |
| 7e5e9f54 JB |
267 | help |
| 268 | Include support for phyCORE-i.MX27 (aka pcm038) platform. This | |
| 269 | includes specific configurations for the module and its peripherals. | |
| ff6552e4 JB |
270 | |
| 271 | choice | |
| 272 | prompt "Baseboard" | |
| 273 | depends on MACH_PCM038 | |
| 274 | default MACH_PCM970_BASEBOARD | |
| 275 | ||
| 276 | config MACH_PCM970_BASEBOARD | |
| ad851bff UKK |
277 | bool "PHYTEC PCM970 development board" |
| 278 | select IMX_HAVE_PLATFORM_IMX_FB | |
| 9d3d945a | 279 | select IMX_HAVE_PLATFORM_MXC_MMC |
| ff6552e4 JB |
280 | help |
| 281 | This adds board specific devices that can be found on Phytec's | |
| 282 | PCM970 evaluation board. | |
| 283 | ||
| 284 | endchoice | |
| 6bbdbf2f | 285 | |
| bc727390 | 286 | config MACH_CPUIMX27 |
| af5b1df7 | 287 | bool "Eukrea CPUIMX27 module" |
| bd455ed3 | 288 | select IMX_HAVE_PLATFORM_FSL_USB2_UDC |
| e0a1961d | 289 | select IMX_HAVE_PLATFORM_IMX2_WDT |
| c6987159 | 290 | select IMX_HAVE_PLATFORM_IMX_I2C |
| d5dac4a6 | 291 | select IMX_HAVE_PLATFORM_IMX_UART |
| 2eb42d5c | 292 | select IMX_HAVE_PLATFORM_MXC_EHCI |
| 0e7a29a8 | 293 | select IMX_HAVE_PLATFORM_MXC_NAND |
| ae71a562 | 294 | select IMX_HAVE_PLATFORM_MXC_W1 |
| 794987ac | 295 | select USB_ULPI_VIEWPORT if USB_ULPI |
| b1b3f49c | 296 | select SOC_IMX27 |
| af5b1df7 EB |
297 | help |
| 298 | Include support for Eukrea CPUIMX27 platform. This includes | |
| 299 | specific configurations for the module and its peripherals. | |
| 300 | ||
| 301 | config MACH_EUKREA_CPUIMX27_USESDHC2 | |
| 302 | bool "CPUIMX27 integrates SDHC2 module" | |
| bc727390 | 303 | depends on MACH_CPUIMX27 |
| 9d3d945a | 304 | select IMX_HAVE_PLATFORM_MXC_MMC |
| af5b1df7 | 305 | help |
| 2d66c780 | 306 | This adds support for the internal SDHC2 used on CPUIMX27 |
| af5b1df7 EB |
307 | for wifi or eMMC. |
| 308 | ||
| 2d66c780 EB |
309 | config MACH_EUKREA_CPUIMX27_USEUART4 |
| 310 | bool "CPUIMX27 integrates UART4 module" | |
| 311 | depends on MACH_CPUIMX27 | |
| 312 | help | |
| 313 | This adds support for the internal UART4 used on CPUIMX27 | |
| 314 | for bluetooth. | |
| 315 | ||
| a961bf38 EB |
316 | choice |
| 317 | prompt "Baseboard" | |
| bc727390 | 318 | depends on MACH_CPUIMX27 |
| a961bf38 EB |
319 | default MACH_EUKREA_MBIMX27_BASEBOARD |
| 320 | ||
| 321 | config MACH_EUKREA_MBIMX27_BASEBOARD | |
| 4697bb92 | 322 | bool "Eukrea MBIMX27 development board" |
| ad851bff | 323 | select IMX_HAVE_PLATFORM_IMX_FB |
| 3f880141 | 324 | select IMX_HAVE_PLATFORM_IMX_KEYPAD |
| 4697bb92 | 325 | select IMX_HAVE_PLATFORM_IMX_SSI |
| d5dac4a6 | 326 | select IMX_HAVE_PLATFORM_IMX_UART |
| 9d3d945a | 327 | select IMX_HAVE_PLATFORM_MXC_MMC |
| 7536cf99 | 328 | select IMX_HAVE_PLATFORM_SPI_IMX |
| 47e837b5 | 329 | select LEDS_GPIO_REGISTER |
| a961bf38 EB |
330 | help |
| 331 | This adds board specific devices that can be found on Eukrea's | |
| 332 | MBIMX27 evaluation board. | |
| 333 | ||
| 334 | endchoice | |
| 335 | ||
| ec9be0de FE |
336 | config MACH_MX27_3DS |
| 337 | bool "MX27PDK platform" | |
| 96cf4239 | 338 | select IMX_HAVE_PLATFORM_FSL_USB2_UDC |
| 8be9252f | 339 | select IMX_HAVE_PLATFORM_IMX2_WDT |
| 1abcb4cc | 340 | select IMX_HAVE_PLATFORM_IMX_FB |
| 5885f036 | 341 | select IMX_HAVE_PLATFORM_IMX_I2C |
| 3f880141 | 342 | select IMX_HAVE_PLATFORM_IMX_KEYPAD |
| 688b5cbb | 343 | select IMX_HAVE_PLATFORM_IMX_SSI |
| d5dac4a6 | 344 | select IMX_HAVE_PLATFORM_IMX_UART |
| 4c11c286 | 345 | select IMX_HAVE_PLATFORM_MX2_CAMERA |
| 96cf4239 | 346 | select IMX_HAVE_PLATFORM_MXC_EHCI |
| 9d3d945a | 347 | select IMX_HAVE_PLATFORM_MXC_MMC |
| c67a3e09 | 348 | select IMX_HAVE_PLATFORM_SPI_IMX |
| 92cb33f1 | 349 | select MXC_DEBUG_BOARD |
| 794987ac | 350 | select USB_ULPI_VIEWPORT if USB_ULPI |
| b1b3f49c | 351 | select SOC_IMX27 |
| ec9be0de FE |
352 | help |
| 353 | Include support for MX27PDK platform. This includes specific | |
| 354 | configurations for the board and its peripherals. | |
| 8c032ec3 | 355 | |
| 3b161e51 JM |
356 | config MACH_IMX27_VISSTRIM_M10 |
| 357 | bool "Vista Silicon i.MX27 Visstrim_m10" | |
| 5309498a | 358 | select IMX_HAVE_PLATFORM_GPIO_KEYS |
| 3b161e51 | 359 | select IMX_HAVE_PLATFORM_IMX_I2C |
| 5658bff6 | 360 | select IMX_HAVE_PLATFORM_IMX_SSI |
| 3b161e51 | 361 | select IMX_HAVE_PLATFORM_IMX_UART |
| f52f5a55 | 362 | select IMX_HAVE_PLATFORM_MX2_CAMERA |
| 3ab3a350 | 363 | select IMX_HAVE_PLATFORM_MX2_EMMA |
| 2eb42d5c | 364 | select IMX_HAVE_PLATFORM_MXC_EHCI |
| 32189139 | 365 | select IMX_HAVE_PLATFORM_MXC_MMC |
| acb6464c | 366 | select LEDS_GPIO_REGISTER |
| b1b3f49c | 367 | select SOC_IMX27 |
| 3b161e51 JM |
368 | help |
| 369 | Include support for Visstrim_m10 platform and its different variants. | |
| 370 | This includes specific configurations for the board and its | |
| 371 | peripherals. | |
| 372 | ||
| f747f935 | 373 | config MACH_IMX27LITE |
| 8c032ec3 | 374 | bool "LogicPD MX27 LITEKIT platform" |
| a5e2051b | 375 | select IMX_HAVE_PLATFORM_IMX_SSI |
| b1b3f49c RK |
376 | select IMX_HAVE_PLATFORM_IMX_UART |
| 377 | select SOC_IMX27 | |
| 8c032ec3 DS |
378 | help |
| 379 | Include support for MX27 LITEKIT platform. This includes specific | |
| 380 | configurations for the board and its peripherals. | |
| 381 | ||
| 33731698 LF |
382 | config MACH_PCA100 |
| 383 | bool "Phytec phyCARD-s (pca100)" | |
| bd455ed3 | 384 | select IMX_HAVE_PLATFORM_FSL_USB2_UDC |
| e0a1961d | 385 | select IMX_HAVE_PLATFORM_IMX2_WDT |
| ad851bff | 386 | select IMX_HAVE_PLATFORM_IMX_FB |
| c6987159 | 387 | select IMX_HAVE_PLATFORM_IMX_I2C |
| 4697bb92 | 388 | select IMX_HAVE_PLATFORM_IMX_SSI |
| d5dac4a6 | 389 | select IMX_HAVE_PLATFORM_IMX_UART |
| 2eb42d5c | 390 | select IMX_HAVE_PLATFORM_MXC_EHCI |
| 9d3d945a | 391 | select IMX_HAVE_PLATFORM_MXC_MMC |
| 0e7a29a8 | 392 | select IMX_HAVE_PLATFORM_MXC_NAND |
| ae71a562 | 393 | select IMX_HAVE_PLATFORM_MXC_W1 |
| 7536cf99 | 394 | select IMX_HAVE_PLATFORM_SPI_IMX |
| 794987ac | 395 | select USB_ULPI_VIEWPORT if USB_ULPI |
| b1b3f49c | 396 | select SOC_IMX27 |
| 33731698 LF |
397 | help |
| 398 | Include support for phyCARD-s (aka pca100) platform. This | |
| 399 | includes specific configurations for the module and its peripherals. | |
| 400 | ||
| 143a179d ACA |
401 | config MACH_MXT_TD60 |
| 402 | bool "Maxtrack i-MXT TD60" | |
| ad851bff | 403 | select IMX_HAVE_PLATFORM_IMX_FB |
| c6987159 | 404 | select IMX_HAVE_PLATFORM_IMX_I2C |
| d5dac4a6 | 405 | select IMX_HAVE_PLATFORM_IMX_UART |
| 9d3d945a | 406 | select IMX_HAVE_PLATFORM_MXC_MMC |
| 0e7a29a8 | 407 | select IMX_HAVE_PLATFORM_MXC_NAND |
| b1b3f49c | 408 | select SOC_IMX27 |
| 143a179d ACA |
409 | help |
| 410 | Include support for i-MXT (aka td60) platform. This | |
| 411 | includes specific configurations for the module and its peripherals. | |
| 412 | ||
| 9c2c3584 FE |
413 | config MACH_IMX27IPCAM |
| 414 | bool "IMX27 IPCAM platform" | |
| 9c2c3584 FE |
415 | select IMX_HAVE_PLATFORM_IMX2_WDT |
| 416 | select IMX_HAVE_PLATFORM_IMX_UART | |
| b1b3f49c | 417 | select SOC_IMX27 |
| 9c2c3584 FE |
418 | help |
| 419 | Include support for IMX27 IPCAM platform. This includes specific | |
| 420 | configurations for the board and its peripherals. | |
| 421 | ||
| 9f0749e3 SH |
422 | config MACH_IMX27_DT |
| 423 | bool "Support i.MX27 platforms from device tree" | |
| 424 | select SOC_IMX27 | |
| 9f0749e3 SH |
425 | help |
| 426 | Include support for Freescale i.MX27 based platforms | |
| 427 | using the device tree for discovery | |
| 428 | ||
| 6bbdbf2f | 429 | endif |
| 27ad4bf7 | 430 | |
| c5a0d497 | 431 | if ARCH_MULTI_V6 |
| 27ad4bf7 UKK |
432 | |
| 433 | comment "MX31 platforms:" | |
| 434 | ||
| 435 | config MACH_MX31ADS | |
| 436 | bool "Support MX31ADS platforms" | |
| b1b3f49c | 437 | default y |
| 27ad4bf7 UKK |
438 | select IMX_HAVE_PLATFORM_IMX_I2C |
| 439 | select IMX_HAVE_PLATFORM_IMX_SSI | |
| 440 | select IMX_HAVE_PLATFORM_IMX_UART | |
| b1b3f49c | 441 | select SOC_IMX31 |
| 27ad4bf7 UKK |
442 | help |
| 443 | Include support for MX31ADS platform. This includes specific | |
| 444 | configurations for the board and its peripherals. | |
| 445 | ||
| 446 | config MACH_MX31ADS_WM1133_EV1 | |
| 447 | bool "Support Wolfson Microelectronics 1133-EV1 module" | |
| 448 | depends on MACH_MX31ADS | |
| 449 | depends on MFD_WM8350_I2C | |
| 69eb383a | 450 | depends on REGULATOR_WM8350 = y |
| 27ad4bf7 UKK |
451 | help |
| 452 | Include support for the Wolfson Microelectronics 1133-EV1 PMU | |
| 453 | and audio module for the MX31ADS platform. | |
| 454 | ||
| 455 | config MACH_MX31LILLY | |
| 456 | bool "Support MX31 LILLY-1131 platforms (INCO startec)" | |
| 27ad4bf7 UKK |
457 | select IMX_HAVE_PLATFORM_IMX_UART |
| 458 | select IMX_HAVE_PLATFORM_IPU_CORE | |
| 459 | select IMX_HAVE_PLATFORM_MXC_EHCI | |
| 460 | select IMX_HAVE_PLATFORM_MXC_MMC | |
| 461 | select IMX_HAVE_PLATFORM_SPI_IMX | |
| 794987ac | 462 | select USB_ULPI_VIEWPORT if USB_ULPI |
| b1b3f49c | 463 | select SOC_IMX31 |
| 27ad4bf7 UKK |
464 | help |
| 465 | Include support for mx31 based LILLY1131 modules. This includes | |
| 466 | specific configurations for the board and its peripherals. | |
| 467 | ||
| 468 | config MACH_MX31LITE | |
| 469 | bool "Support MX31 LITEKIT (LogicPD)" | |
| 27ad4bf7 UKK |
470 | select IMX_HAVE_PLATFORM_IMX2_WDT |
| 471 | select IMX_HAVE_PLATFORM_IMX_UART | |
| 472 | select IMX_HAVE_PLATFORM_MXC_EHCI | |
| 473 | select IMX_HAVE_PLATFORM_MXC_MMC | |
| 474 | select IMX_HAVE_PLATFORM_MXC_NAND | |
| 475 | select IMX_HAVE_PLATFORM_MXC_RTC | |
| 476 | select IMX_HAVE_PLATFORM_SPI_IMX | |
| 47e837b5 | 477 | select LEDS_GPIO_REGISTER |
| 794987ac | 478 | select USB_ULPI_VIEWPORT if USB_ULPI |
| b1b3f49c | 479 | select SOC_IMX31 |
| 27ad4bf7 UKK |
480 | help |
| 481 | Include support for MX31 LITEKIT platform. This includes specific | |
| 482 | configurations for the board and its peripherals. | |
| 483 | ||
| 484 | config MACH_PCM037 | |
| 485 | bool "Support Phytec pcm037 (i.MX31) platforms" | |
| 27ad4bf7 UKK |
486 | select IMX_HAVE_PLATFORM_FSL_USB2_UDC |
| 487 | select IMX_HAVE_PLATFORM_IMX2_WDT | |
| 488 | select IMX_HAVE_PLATFORM_IMX_I2C | |
| 489 | select IMX_HAVE_PLATFORM_IMX_UART | |
| 490 | select IMX_HAVE_PLATFORM_IPU_CORE | |
| 491 | select IMX_HAVE_PLATFORM_MXC_EHCI | |
| 492 | select IMX_HAVE_PLATFORM_MXC_MMC | |
| 493 | select IMX_HAVE_PLATFORM_MXC_NAND | |
| 494 | select IMX_HAVE_PLATFORM_MXC_W1 | |
| 794987ac | 495 | select USB_ULPI_VIEWPORT if USB_ULPI |
| b1b3f49c | 496 | select SOC_IMX31 |
| 27ad4bf7 UKK |
497 | help |
| 498 | Include support for Phytec pcm037 platform. This includes | |
| 499 | specific configurations for the board and its peripherals. | |
| 500 | ||
| 501 | config MACH_PCM037_EET | |
| 502 | bool "Support pcm037 EET board extensions" | |
| 503 | depends on MACH_PCM037 | |
| 504 | select IMX_HAVE_PLATFORM_GPIO_KEYS | |
| 505 | select IMX_HAVE_PLATFORM_SPI_IMX | |
| 506 | help | |
| 507 | Add support for PCM037 EET baseboard extensions. If you are using the | |
| 508 | OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel | |
| 509 | command-line parameter. | |
| 510 | ||
| 511 | config MACH_MX31_3DS | |
| 512 | bool "Support MX31PDK (3DS)" | |
| 27ad4bf7 UKK |
513 | select IMX_HAVE_PLATFORM_FSL_USB2_UDC |
| 514 | select IMX_HAVE_PLATFORM_IMX2_WDT | |
| 515 | select IMX_HAVE_PLATFORM_IMX_I2C | |
| 516 | select IMX_HAVE_PLATFORM_IMX_KEYPAD | |
| 3ef7cf18 | 517 | select IMX_HAVE_PLATFORM_IMX_SSI |
| 27ad4bf7 UKK |
518 | select IMX_HAVE_PLATFORM_IMX_UART |
| 519 | select IMX_HAVE_PLATFORM_IPU_CORE | |
| 520 | select IMX_HAVE_PLATFORM_MXC_EHCI | |
| d093d5bb | 521 | select IMX_HAVE_PLATFORM_MXC_MMC |
| 27ad4bf7 UKK |
522 | select IMX_HAVE_PLATFORM_MXC_NAND |
| 523 | select IMX_HAVE_PLATFORM_SPI_IMX | |
| b1b3f49c | 524 | select MXC_DEBUG_BOARD |
| 794987ac | 525 | select USB_ULPI_VIEWPORT if USB_ULPI |
| b1b3f49c | 526 | select SOC_IMX31 |
| 27ad4bf7 UKK |
527 | help |
| 528 | Include support for MX31PDK (3DS) platform. This includes specific | |
| 529 | configurations for the board and its peripherals. | |
| 530 | ||
| 531 | config MACH_MX31_3DS_MXC_NAND_USE_BBT | |
| 532 | bool "Make the MXC NAND driver use the in flash Bad Block Table" | |
| 533 | depends on MACH_MX31_3DS | |
| 534 | depends on MTD_NAND_MXC | |
| 535 | help | |
| 536 | Enable this if you want that the MXC NAND driver uses the in flash | |
| 537 | Bad Block Table to know what blocks are bad instead of scanning the | |
| 538 | entire flash looking for bad block markers. | |
| 539 | ||
| 540 | config MACH_MX31MOBOARD | |
| 541 | bool "Support mx31moboard platforms (EPFL Mobots group)" | |
| 27ad4bf7 | 542 | select IMX_HAVE_PLATFORM_FSL_USB2_UDC |
| 31776fbc | 543 | select IMX_HAVE_PLATFORM_IMX2_WDT |
| 27ad4bf7 | 544 | select IMX_HAVE_PLATFORM_IMX_I2C |
| 2f7b9451 | 545 | select IMX_HAVE_PLATFORM_IMX_SSI |
| 27ad4bf7 UKK |
546 | select IMX_HAVE_PLATFORM_IMX_UART |
| 547 | select IMX_HAVE_PLATFORM_IPU_CORE | |
| 548 | select IMX_HAVE_PLATFORM_MXC_EHCI | |
| 549 | select IMX_HAVE_PLATFORM_MXC_MMC | |
| 550 | select IMX_HAVE_PLATFORM_SPI_IMX | |
| 47e837b5 | 551 | select LEDS_GPIO_REGISTER |
| 794987ac | 552 | select USB_ULPI_VIEWPORT if USB_ULPI |
| b1b3f49c | 553 | select SOC_IMX31 |
| 27ad4bf7 UKK |
554 | help |
| 555 | Include support for mx31moboard platform. This includes specific | |
| 556 | configurations for the board and its peripherals. | |
| 557 | ||
| 558 | config MACH_QONG | |
| 559 | bool "Support Dave/DENX QongEVB-LITE platform" | |
| bbb43363 | 560 | select IMX_HAVE_PLATFORM_IMX2_WDT |
| b1b3f49c RK |
561 | select IMX_HAVE_PLATFORM_IMX_UART |
| 562 | select SOC_IMX31 | |
| 27ad4bf7 UKK |
563 | help |
| 564 | Include support for Dave/DENX QongEVB-LITE platform. This includes | |
| 565 | specific configurations for the board and its peripherals. | |
| 566 | ||
| 567 | config MACH_ARMADILLO5X0 | |
| 568 | bool "Support Atmark Armadillo-500 Development Base Board" | |
| 27ad4bf7 UKK |
569 | select IMX_HAVE_PLATFORM_GPIO_KEYS |
| 570 | select IMX_HAVE_PLATFORM_IMX_I2C | |
| 571 | select IMX_HAVE_PLATFORM_IMX_UART | |
| 572 | select IMX_HAVE_PLATFORM_IPU_CORE | |
| 573 | select IMX_HAVE_PLATFORM_MXC_EHCI | |
| 574 | select IMX_HAVE_PLATFORM_MXC_MMC | |
| 575 | select IMX_HAVE_PLATFORM_MXC_NAND | |
| 794987ac | 576 | select USB_ULPI_VIEWPORT if USB_ULPI |
| b1b3f49c | 577 | select SOC_IMX31 |
| 27ad4bf7 UKK |
578 | help |
| 579 | Include support for Atmark Armadillo-500 platform. This includes | |
| 580 | specific configurations for the board and its peripherals. | |
| 581 | ||
| 582 | config MACH_KZM_ARM11_01 | |
| 583 | bool "Support KZM-ARM11-01(Kyoto Microcomputer)" | |
| 27ad4bf7 | 584 | select IMX_HAVE_PLATFORM_IMX_UART |
| b1b3f49c | 585 | select SOC_IMX31 |
| 27ad4bf7 UKK |
586 | help |
| 587 | Include support for KZM-ARM11-01. This includes specific | |
| 588 | configurations for the board and its peripherals. | |
| 589 | ||
| 590 | config MACH_BUG | |
| 591 | bool "Support Buglabs BUGBase platform" | |
| 27ad4bf7 | 592 | default y |
| b1b3f49c RK |
593 | select IMX_HAVE_PLATFORM_IMX_UART |
| 594 | select SOC_IMX31 | |
| 27ad4bf7 UKK |
595 | help |
| 596 | Include support for BUGBase 1.3 platform. This includes specific | |
| 597 | configurations for the board and its peripherals. | |
| 598 | ||
| d2a37b3d DGC |
599 | config MACH_IMX31_DT |
| 600 | bool "Support i.MX31 platforms from device tree" | |
| 601 | select SOC_IMX31 | |
| d2a37b3d DGC |
602 | help |
| 603 | Include support for Freescale i.MX31 based platforms | |
| 604 | using the device tree for discovery. | |
| 605 | ||
| 27ad4bf7 UKK |
606 | comment "MX35 platforms:" |
| 607 | ||
| a55a3d72 ST |
608 | config MACH_IMX35_DT |
| 609 | bool "Support i.MX35 platforms from device tree" | |
| 610 | select SOC_IMX35 | |
| 611 | help | |
| 612 | Include support for Freescale i.MX35 based platforms | |
| 613 | using the device tree for discovery. | |
| 614 | ||
| 27ad4bf7 UKK |
615 | config MACH_PCM043 |
| 616 | bool "Support Phytec pcm043 (i.MX35) platforms" | |
| 27ad4bf7 UKK |
617 | select IMX_HAVE_PLATFORM_FLEXCAN |
| 618 | select IMX_HAVE_PLATFORM_FSL_USB2_UDC | |
| 619 | select IMX_HAVE_PLATFORM_IMX2_WDT | |
| 620 | select IMX_HAVE_PLATFORM_IMX_I2C | |
| 621 | select IMX_HAVE_PLATFORM_IMX_SSI | |
| 622 | select IMX_HAVE_PLATFORM_IMX_UART | |
| 623 | select IMX_HAVE_PLATFORM_IPU_CORE | |
| 624 | select IMX_HAVE_PLATFORM_MXC_EHCI | |
| 625 | select IMX_HAVE_PLATFORM_MXC_NAND | |
| 626 | select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX | |
| 794987ac | 627 | select USB_ULPI_VIEWPORT if USB_ULPI |
| b1b3f49c | 628 | select SOC_IMX35 |
| 27ad4bf7 UKK |
629 | help |
| 630 | Include support for Phytec pcm043 platform. This includes | |
| 631 | specific configurations for the board and its peripherals. | |
| 632 | ||
| 633 | config MACH_MX35_3DS | |
| 634 | bool "Support MX35PDK platform" | |
| 27ad4bf7 UKK |
635 | select IMX_HAVE_PLATFORM_FSL_USB2_UDC |
| 636 | select IMX_HAVE_PLATFORM_IMX2_WDT | |
| 8e3e26a8 | 637 | select IMX_HAVE_PLATFORM_IMX_FB |
| 27ad4bf7 UKK |
638 | select IMX_HAVE_PLATFORM_IMX_I2C |
| 639 | select IMX_HAVE_PLATFORM_IMX_UART | |
| 8e3e26a8 | 640 | select IMX_HAVE_PLATFORM_IPU_CORE |
| 27ad4bf7 UKK |
641 | select IMX_HAVE_PLATFORM_MXC_EHCI |
| 642 | select IMX_HAVE_PLATFORM_MXC_NAND | |
| c6fd6d11 | 643 | select IMX_HAVE_PLATFORM_MXC_RTC |
| 27ad4bf7 | 644 | select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX |
| b1b3f49c RK |
645 | select MXC_DEBUG_BOARD |
| 646 | select SOC_IMX35 | |
| 27ad4bf7 UKK |
647 | help |
| 648 | Include support for MX35PDK platform. This includes specific | |
| 649 | configurations for the board and its peripherals. | |
| 650 | ||
| a69aa72a | 651 | config MACH_EUKREA_CPUIMX35SD |
| 27ad4bf7 | 652 | bool "Support Eukrea CPUIMX35 Platform" |
| 27ad4bf7 UKK |
653 | select IMX_HAVE_PLATFORM_FLEXCAN |
| 654 | select IMX_HAVE_PLATFORM_FSL_USB2_UDC | |
| 655 | select IMX_HAVE_PLATFORM_IMX2_WDT | |
| 656 | select IMX_HAVE_PLATFORM_IMX_I2C | |
| 657 | select IMX_HAVE_PLATFORM_IMX_UART | |
| 658 | select IMX_HAVE_PLATFORM_MXC_EHCI | |
| 659 | select IMX_HAVE_PLATFORM_MXC_NAND | |
| 660 | select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX | |
| 794987ac | 661 | select USB_ULPI_VIEWPORT if USB_ULPI |
| b1b3f49c | 662 | select SOC_IMX35 |
| 27ad4bf7 UKK |
663 | help |
| 664 | Include support for Eukrea CPUIMX35 platform. This includes | |
| 665 | specific configurations for the board and its peripherals. | |
| 666 | ||
| 667 | choice | |
| 668 | prompt "Baseboard" | |
| a69aa72a | 669 | depends on MACH_EUKREA_CPUIMX35SD |
| 27ad4bf7 UKK |
670 | default MACH_EUKREA_MBIMXSD35_BASEBOARD |
| 671 | ||
| 672 | config MACH_EUKREA_MBIMXSD35_BASEBOARD | |
| 673 | bool "Eukrea MBIMXSD development board" | |
| 674 | select IMX_HAVE_PLATFORM_GPIO_KEYS | |
| 675 | select IMX_HAVE_PLATFORM_IMX_SSI | |
| 676 | select IMX_HAVE_PLATFORM_IPU_CORE | |
| 0e189858 | 677 | select IMX_HAVE_PLATFORM_SPI_IMX |
| 47e837b5 | 678 | select LEDS_GPIO_REGISTER |
| 27ad4bf7 UKK |
679 | help |
| 680 | This adds board specific devices that can be found on Eukrea's | |
| 681 | MBIMXSD evaluation board. | |
| 682 | ||
| 683 | endchoice | |
| 684 | ||
| 685 | config MACH_VPR200 | |
| 686 | bool "Support VPR200 platform" | |
| 27ad4bf7 UKK |
687 | select IMX_HAVE_PLATFORM_FSL_USB2_UDC |
| 688 | select IMX_HAVE_PLATFORM_GPIO_KEYS | |
| 689 | select IMX_HAVE_PLATFORM_IMX2_WDT | |
| 27ad4bf7 | 690 | select IMX_HAVE_PLATFORM_IMX_I2C |
| b1b3f49c | 691 | select IMX_HAVE_PLATFORM_IMX_UART |
| 27ad4bf7 UKK |
692 | select IMX_HAVE_PLATFORM_IPU_CORE |
| 693 | select IMX_HAVE_PLATFORM_MXC_EHCI | |
| 694 | select IMX_HAVE_PLATFORM_MXC_NAND | |
| 695 | select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX | |
| b1b3f49c | 696 | select SOC_IMX35 |
| 27ad4bf7 UKK |
697 | help |
| 698 | Include support for VPR200 platform. This includes specific | |
| 699 | configurations for the board and its peripherals. | |
| 700 | ||
| c5a0d497 SG |
701 | endif |
| 702 | ||
| 703 | if ARCH_MULTI_V7 | |
| 704 | ||
| 784a90c0 SH |
705 | comment "i.MX51 machines:" |
| 706 | ||
| 707 | config MACH_IMX51_DT | |
| 708 | bool "Support i.MX51 platforms from device tree" | |
| b1b3f49c | 709 | select SOC_IMX51 |
| 784a90c0 SH |
710 | help |
| 711 | Include support for Freescale i.MX51 based platforms | |
| 712 | using the device tree for discovery | |
| 713 | ||
| 714 | config MACH_MX51_BABBAGE | |
| 715 | bool "Support MX51 BABBAGE platforms" | |
| 784a90c0 SH |
716 | select IMX_HAVE_PLATFORM_FSL_USB2_UDC |
| 717 | select IMX_HAVE_PLATFORM_IMX2_WDT | |
| 718 | select IMX_HAVE_PLATFORM_IMX_I2C | |
| 719 | select IMX_HAVE_PLATFORM_IMX_UART | |
| 720 | select IMX_HAVE_PLATFORM_MXC_EHCI | |
| 721 | select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX | |
| 722 | select IMX_HAVE_PLATFORM_SPI_IMX | |
| b1b3f49c | 723 | select SOC_IMX51 |
| 784a90c0 SH |
724 | help |
| 725 | Include support for MX51 Babbage platform, also known as MX51EVK in | |
| 726 | u-boot. This includes specific configurations for the board and its | |
| 727 | peripherals. | |
| 728 | ||
| 784a90c0 SH |
729 | config MACH_EUKREA_CPUIMX51SD |
| 730 | bool "Support Eukrea CPUIMX51SD module" | |
| 784a90c0 | 731 | select IMX_HAVE_PLATFORM_FSL_USB2_UDC |
| b1b3f49c | 732 | select IMX_HAVE_PLATFORM_IMX2_WDT |
| 784a90c0 SH |
733 | select IMX_HAVE_PLATFORM_IMX_I2C |
| 734 | select IMX_HAVE_PLATFORM_IMX_UART | |
| 735 | select IMX_HAVE_PLATFORM_MXC_EHCI | |
| 736 | select IMX_HAVE_PLATFORM_MXC_NAND | |
| 737 | select IMX_HAVE_PLATFORM_SPI_IMX | |
| b1b3f49c | 738 | select SOC_IMX51 |
| 784a90c0 SH |
739 | help |
| 740 | Include support for Eukrea CPUIMX51SD platform. This includes | |
| 741 | specific configurations for the module and its peripherals. | |
| 742 | ||
| 743 | choice | |
| 744 | prompt "Baseboard" | |
| 745 | depends on MACH_EUKREA_CPUIMX51SD | |
| 746 | default MACH_EUKREA_MBIMXSD51_BASEBOARD | |
| 747 | ||
| 748 | config MACH_EUKREA_MBIMXSD51_BASEBOARD | |
| 749 | prompt "Eukrea MBIMXSD development board" | |
| 750 | bool | |
| 932d67d4 | 751 | select IMX_HAVE_PLATFORM_IMX_SSI |
| 784a90c0 SH |
752 | select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX |
| 753 | select LEDS_GPIO_REGISTER | |
| 754 | help | |
| 755 | This adds board specific devices that can be found on Eukrea's | |
| 756 | MBIMXSD evaluation board. | |
| 757 | ||
| 758 | endchoice | |
| 759 | ||
| 442279da | 760 | comment "Device tree only" |
| 784a90c0 | 761 | |
| 361b0a41 GU |
762 | config SOC_IMX50 |
| 763 | bool "i.MX50 support" | |
| 764 | select HAVE_IMX_SRC | |
| f7f3d4b2 | 765 | select PINCTRL_IMX50 |
| 361b0a41 GU |
766 | select SOC_IMX5 |
| 767 | ||
| 768 | help | |
| 769 | This enables support for Freescale i.MX50 processor. | |
| 770 | ||
| 442279da SG |
771 | config SOC_IMX53 |
| 772 | bool "i.MX53 support" | |
| bd3d924d | 773 | select HAVE_IMX_SRC |
| 442279da | 774 | select PINCTRL_IMX53 |
| b1b3f49c | 775 | select SOC_IMX5 |
| 784a90c0 | 776 | |
| 784a90c0 | 777 | help |
| 442279da | 778 | This enables support for Freescale i.MX53 processor. |
| bac89d75 | 779 | |
| 94f890ec SG |
780 | config SOC_IMX6 |
| 781 | bool | |
| 96efb44e | 782 | select ARM_ERRATA_754322 |
| 96efb44e | 783 | select ARM_ERRATA_775420 |
| bac89d75 | 784 | select ARM_GIC |
| e95dddb3 | 785 | select HAVE_IMX_ANATOP |
| 9fbbe689 SG |
786 | select HAVE_IMX_GPC |
| 787 | select HAVE_IMX_MMDC | |
| aec99b7b | 788 | select HAVE_IMX_SRC |
| baa64151 | 789 | select MFD_SYSCON |
| 96efb44e SG |
790 | select PL310_ERRATA_588369 if CACHE_PL310 |
| 791 | select PL310_ERRATA_727915 if CACHE_PL310 | |
| 792 | select PL310_ERRATA_769419 if CACHE_PL310 | |
| bac89d75 | 793 | |
| 94f890ec SG |
794 | config SOC_IMX6Q |
| 795 | bool "i.MX6 Quad/DualLite support" | |
| 796 | select ARM_ERRATA_764369 if SMP | |
| 797 | select HAVE_ARM_SCU if SMP | |
| 798 | select HAVE_ARM_TWD if SMP | |
| 799 | select MIGHT_HAVE_PCI | |
| 800 | select PCI_DOMAINS if PCI | |
| 801 | select PINCTRL_IMX6Q | |
| 802 | select SOC_IMX6 | |
| 803 | ||
| bac89d75 SG |
804 | help |
| 805 | This enables support for Freescale i.MX6 Quad processor. | |
| 806 | ||
| 31a2fbf7 SG |
807 | config SOC_IMX6SL |
| 808 | bool "i.MX6 SoloLite support" | |
| 31a2fbf7 | 809 | select PINCTRL_IMX6SL |
| 94f890ec | 810 | select SOC_IMX6 |
| 31a2fbf7 SG |
811 | |
| 812 | help | |
| 813 | This enables support for Freescale i.MX6 SoloLite processor. | |
| 814 | ||
| 5be913c6 JL |
815 | config SOC_VF610 |
| 816 | bool "Vybrid Family VF610 support" | |
| 5be913c6 | 817 | select ARM_GIC |
| 5be913c6 JL |
818 | select PINCTRL_VF610 |
| 819 | select VF_PIT_TIMER | |
| 820 | select PL310_ERRATA_588369 if CACHE_PL310 | |
| 821 | select PL310_ERRATA_727915 if CACHE_PL310 | |
| 822 | select PL310_ERRATA_769419 if CACHE_PL310 | |
| 823 | ||
| 824 | help | |
| 825 | This enable support for Freescale Vybrid VF610 processor. | |
| 826 | ||
| 27ad4bf7 | 827 | endif |
| e0557c0d SG |
828 | |
| 829 | source "arch/arm/mach-imx/devices/Kconfig" | |
| 3995eb82 | 830 | |
| c5a0d497 | 831 | endmenu |