projects / deliverable / linux.git / blame
| Commit | Line | Data |
|---|---|---|
| 21278aea | 1 | menuconfig ARCH_MXC |
| 4cc3c840 | 2 | bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 |
| 5a1513f6 | 3 | select ARCH_HAS_OPP |
| c5a0d497 | 4 | select ARCH_REQUIRE_GPIOLIB |
| f36b594f | 5 | select ARM_CPU_SUSPEND if PM |
| c5a0d497 | 6 | select CLKSRC_MMIO |
| c5a0d497 | 7 | select GENERIC_IRQ_CHIP |
| f7f3d4b2 | 8 | select PINCTRL |
| 5a1513f6 | 9 | select PM_OPP if PM |
| a2887546 | 10 | select SOC_BUS |
| 67f5b308 | 11 | select SRAM |
| c5a0d497 SG |
12 | help |
| 13 | Support for Freescale MXC/iMX-based family of processors | |
| 14 | ||
| 21278aea | 15 | if ARCH_MXC |
| 3995eb82 | 16 | |
| 3995eb82 SG |
17 | config MXC_TZIC |
| 18 | bool | |
| 19 | ||
| 20 | config MXC_AVIC | |
| 21 | bool | |
| 22 | ||
| 23 | config MXC_DEBUG_BOARD | |
| 24 | bool "Enable MXC debug board(for 3-stack)" | |
| 25 | help | |
| 26 | The debug board is an integral part of the MXC 3-stack(PDK) | |
| 27 | platforms, it can be attached or removed from the peripheral | |
| 28 | board. On debug board, several debug devices(ethernet, UART, | |
| 29 | buttons, LEDs and JTAG) are implemented. Between the MCU and | |
| 30 | these devices, a CPLD is added as a bridge which performs | |
| 31 | data/address de-multiplexing and decode, signal level shift, | |
| 32 | interrupt control and various board functions. | |
| 33 | ||
| 34 | config HAVE_EPIT | |
| 35 | bool | |
| 36 | ||
| 37 | config MXC_USE_EPIT | |
| 38 | bool "Use EPIT instead of GPT" | |
| 39 | depends on HAVE_EPIT | |
| 40 | help | |
| 41 | Use EPIT as the system timer on systems that have it. Normally you | |
| 42 | don't have a reason to do so as the EPIT has the same features and | |
| 43 | uses the same clocks as the GPT. Anyway, on some systems the GPT | |
| 44 | may be in use for other purposes. | |
| 45 | ||
| 3995eb82 SG |
46 | config ARCH_HAS_RNGA |
| 47 | bool | |
| 48 | ||
| e95dddb3 AH |
49 | config HAVE_IMX_ANATOP |
| 50 | bool | |
| 51 | ||
| 9fbbe689 SG |
52 | config HAVE_IMX_GPC |
| 53 | bool | |
| 54 | ||
| 55 | config HAVE_IMX_MMDC | |
| 56 | bool | |
| 57 | ||
| 58 | config HAVE_IMX_SRC | |
| 68b25325 | 59 | def_bool y if SMP |
| 02985b94 | 60 | select ARCH_HAS_RESET_CONTROLLER |
| 9fbbe689 | 61 | |
| 267dd34c SG |
62 | config IMX_HAVE_IOMUX_V1 |
| 63 | bool | |
| 64 | ||
| 65 | config ARCH_MXC_IOMUX_V3 | |
| 66 | bool | |
| 67 | ||
| ae4fa7f6 SH |
68 | config ARCH_MX1 |
| 69 | bool | |
| 70 | ||
| ae4fa7f6 SH |
71 | config ARCH_MX25 |
| 72 | bool | |
| 73 | ||
| 74 | config MACH_MX27 | |
| 75 | bool | |
| 76 | ||
| e780d239 | 77 | config SOC_IMX1 |
| e48ab1c1 | 78 | bool |
| ae4fa7f6 | 79 | select ARCH_MX1 |
| e780d239 UKK |
80 | select CPU_ARM920T |
| 81 | select IMX_HAVE_IOMUX_V1 | |
| c7259df3 | 82 | select MXC_AVIC |
| e48ab1c1 UKK |
83 | |
| 84 | config SOC_IMX21 | |
| 85 | bool | |
| b1b3f49c | 86 | select CPU_ARM926T |
| e48ab1c1 | 87 | select IMX_HAVE_IOMUX_V1 |
| c7259df3 | 88 | select MXC_AVIC |
| e48ab1c1 UKK |
89 | |
| 90 | config SOC_IMX25 | |
| e780d239 | 91 | bool |
| ae4fa7f6 | 92 | select ARCH_MX25 |
| b1b3f49c | 93 | select ARCH_MXC_IOMUX_V3 |
| e48ab1c1 | 94 | select CPU_ARM926T |
| c7259df3 | 95 | select MXC_AVIC |
| 5bcaa7a3 | 96 | select PINCTRL_IMX25 |
| e48ab1c1 UKK |
97 | |
| 98 | config SOC_IMX27 | |
| 99 | bool | |
| 68663104 | 100 | select ARCH_HAS_OPP |
| b1b3f49c | 101 | select CPU_ARM926T |
| e48ab1c1 | 102 | select IMX_HAVE_IOMUX_V1 |
| b1b3f49c | 103 | select MACH_MX27 |
| c7259df3 | 104 | select MXC_AVIC |
| acb350e0 | 105 | select PINCTRL_IMX27 |
| e48ab1c1 | 106 | |
| 27ad4bf7 UKK |
107 | config SOC_IMX31 |
| 108 | bool | |
| 109 | select CPU_V6 | |
| 110 | select IMX_HAVE_PLATFORM_MXC_RNGA | |
| 27ad4bf7 | 111 | select MXC_AVIC |
| a89cf59b | 112 | select SMP_ON_UP if SMP |
| 27ad4bf7 UKK |
113 | |
| 114 | config SOC_IMX35 | |
| 115 | bool | |
| 27ad4bf7 | 116 | select ARCH_MXC_IOMUX_V3 |
| 27ad4bf7 | 117 | select HAVE_EPIT |
| 27ad4bf7 | 118 | select MXC_AVIC |
| c51bcd15 | 119 | select PINCTRL_IMX35 |
| a89cf59b | 120 | select SMP_ON_UP if SMP |
| 27ad4bf7 | 121 | |
| 784a90c0 | 122 | config SOC_IMX5 |
| b1b3f49c | 123 | bool |
| 68663104 | 124 | select ARCH_HAS_OPP |
| b1b3f49c | 125 | select ARCH_MXC_IOMUX_V3 |
| b1b3f49c | 126 | select MXC_TZIC |
| 784a90c0 | 127 | |
| 784a90c0 SH |
128 | config SOC_IMX51 |
| 129 | bool | |
| bd3d924d | 130 | select HAVE_IMX_SRC |
| b6798f88 | 131 | select PINCTRL_IMX51 |
| b1b3f49c | 132 | select SOC_IMX5 |
| 784a90c0 | 133 | |
| c5a0d497 | 134 | if ARCH_MULTI_V4T |
| e780d239 | 135 | |
| 07469495 UKK |
136 | comment "MX1 platforms:" |
| 137 | config MACH_MXLADS | |
| 138 | bool | |
| 139 | ||
| 140 | config ARCH_MX1ADS | |
| 141 | bool "MX1ADS platform" | |
| 6348e6b5 | 142 | select IMX_HAVE_PLATFORM_IMX_I2C |
| d112f4e4 | 143 | select IMX_HAVE_PLATFORM_IMX_UART |
| b1b3f49c RK |
144 | select MACH_MXLADS |
| 145 | select SOC_IMX1 | |
| 07469495 UKK |
146 | help |
| 147 | Say Y here if you are using Motorola MX1ADS/MXLADS boards | |
| 148 | ||
| 149 | config MACH_SCB9328 | |
| 150 | bool "Synertronixx scb9328" | |
| d112f4e4 | 151 | select IMX_HAVE_PLATFORM_IMX_UART |
| 123860e1 | 152 | select SOC_IMX1 |
| 07469495 UKK |
153 | help |
| 154 | Say Y here if you are using a Synertronixx scb9328 board | |
| 155 | ||
| 7fc92c60 GGM |
156 | config MACH_APF9328 |
| 157 | bool "APF9328" | |
| 7a994818 | 158 | select IMX_HAVE_PLATFORM_IMX_I2C |
| 7fc92c60 | 159 | select IMX_HAVE_PLATFORM_IMX_UART |
| b1b3f49c | 160 | select SOC_IMX1 |
| 7fc92c60 GGM |
161 | help |
| 162 | Say Yes here if you are using the Armadeus APF9328 development board | |
| 163 | ||
| c5a0d497 SG |
164 | endif |
| 165 | ||
| 166 | if ARCH_MULTI_V5 | |
| 167 | ||
| b6b06be0 | 168 | comment "MX21 platforms:" |
| 80eedae6 | 169 | |
| 6b91edde IC |
170 | config MACH_MX21ADS |
| 171 | bool "MX21ADS platform" | |
| ad851bff | 172 | select IMX_HAVE_PLATFORM_IMX_FB |
| 3c5227fd | 173 | select IMX_HAVE_PLATFORM_IMX_UART |
| 9d3d945a | 174 | select IMX_HAVE_PLATFORM_MXC_MMC |
| 1f8d721c | 175 | select IMX_HAVE_PLATFORM_MXC_NAND |
| b1b3f49c | 176 | select SOC_IMX21 |
| 6b91edde IC |
177 | help |
| 178 | Include support for MX21ADS platform. This includes specific | |
| 179 | configurations for the board and its peripherals. | |
| 180 | ||
| e48ab1c1 UKK |
181 | comment "MX25 platforms:" |
| 182 | ||
| 183 | config MACH_MX25_3DS | |
| 184 | bool "Support MX25PDK (3DS) Platform" | |
| 91dcc7f4 | 185 | select IMX_HAVE_PLATFORM_FLEXCAN |
| 460d30a3 | 186 | select IMX_HAVE_PLATFORM_FSL_USB2_UDC |
| e48ab1c1 UKK |
187 | select IMX_HAVE_PLATFORM_IMX2_WDT |
| 188 | select IMX_HAVE_PLATFORM_IMXDI_RTC | |
| 189 | select IMX_HAVE_PLATFORM_IMX_FB | |
| b1b3f49c | 190 | select IMX_HAVE_PLATFORM_IMX_I2C |
| e48ab1c1 UKK |
191 | select IMX_HAVE_PLATFORM_IMX_KEYPAD |
| 192 | select IMX_HAVE_PLATFORM_IMX_UART | |
| 193 | select IMX_HAVE_PLATFORM_MXC_EHCI | |
| 194 | select IMX_HAVE_PLATFORM_MXC_NAND | |
| 124bf94a | 195 | select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX |
| b1b3f49c | 196 | select SOC_IMX25 |
| e48ab1c1 | 197 | |
| 01dd520a | 198 | config MACH_EUKREA_CPUIMX25SD |
| e48ab1c1 | 199 | bool "Support Eukrea CPUIMX25 Platform" |
| e48ab1c1 UKK |
200 | select IMX_HAVE_PLATFORM_FLEXCAN |
| 201 | select IMX_HAVE_PLATFORM_FSL_USB2_UDC | |
| 4692cba1 | 202 | select IMX_HAVE_PLATFORM_IMX2_WDT |
| e48ab1c1 UKK |
203 | select IMX_HAVE_PLATFORM_IMXDI_RTC |
| 204 | select IMX_HAVE_PLATFORM_IMX_FB | |
| 205 | select IMX_HAVE_PLATFORM_IMX_I2C | |
| 206 | select IMX_HAVE_PLATFORM_IMX_UART | |
| 207 | select IMX_HAVE_PLATFORM_MXC_EHCI | |
| 208 | select IMX_HAVE_PLATFORM_MXC_NAND | |
| 124bf94a | 209 | select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX |
| 794987ac | 210 | select USB_ULPI_VIEWPORT if USB_ULPI |
| b1b3f49c | 211 | select SOC_IMX25 |
| e48ab1c1 UKK |
212 | |
| 213 | choice | |
| 214 | prompt "Baseboard" | |
| 01dd520a | 215 | depends on MACH_EUKREA_CPUIMX25SD |
| e48ab1c1 UKK |
216 | default MACH_EUKREA_MBIMXSD25_BASEBOARD |
| 217 | ||
| 218 | config MACH_EUKREA_MBIMXSD25_BASEBOARD | |
| 219 | bool "Eukrea MBIMXSD development board" | |
| 5309498a | 220 | select IMX_HAVE_PLATFORM_GPIO_KEYS |
| e48ab1c1 | 221 | select IMX_HAVE_PLATFORM_IMX_SSI |
| 49ed9407 | 222 | select IMX_HAVE_PLATFORM_SPI_IMX |
| 47e837b5 | 223 | select LEDS_GPIO_REGISTER |
| e48ab1c1 UKK |
224 | help |
| 225 | This adds board specific devices that can be found on Eukrea's | |
| 226 | MBIMXSD evaluation board. | |
| 227 | ||
| 228 | endchoice | |
| 229 | ||
| ef4bac55 SH |
230 | config MACH_IMX25_DT |
| 231 | bool "Support i.MX25 platforms from device tree" | |
| 232 | select SOC_IMX25 | |
| 233 | help | |
| 234 | Include support for Freescale i.MX25 based platforms | |
| 235 | using the device tree for discovery | |
| 236 | ||
| b6b06be0 UKK |
237 | comment "MX27 platforms:" |
| 238 | ||
| 80eedae6 JB |
239 | config MACH_MX27ADS |
| 240 | bool "MX27ADS platform" | |
| ad851bff | 241 | select IMX_HAVE_PLATFORM_IMX_FB |
| c6987159 | 242 | select IMX_HAVE_PLATFORM_IMX_I2C |
| d5dac4a6 | 243 | select IMX_HAVE_PLATFORM_IMX_UART |
| 9d3d945a | 244 | select IMX_HAVE_PLATFORM_MXC_MMC |
| 0e7a29a8 | 245 | select IMX_HAVE_PLATFORM_MXC_NAND |
| ae71a562 | 246 | select IMX_HAVE_PLATFORM_MXC_W1 |
| b1b3f49c | 247 | select SOC_IMX27 |
| 80eedae6 JB |
248 | help |
| 249 | Include support for MX27ADS platform. This includes specific | |
| 250 | configurations for the board and its peripherals. | |
| 7e5e9f54 JB |
251 | |
| 252 | config MACH_PCM038 | |
| 253 | bool "Phytec phyCORE-i.MX27 CPU module (pcm038)" | |
| e0a1961d | 254 | select IMX_HAVE_PLATFORM_IMX2_WDT |
| c6987159 | 255 | select IMX_HAVE_PLATFORM_IMX_I2C |
| d5dac4a6 | 256 | select IMX_HAVE_PLATFORM_IMX_UART |
| 2eb42d5c | 257 | select IMX_HAVE_PLATFORM_MXC_EHCI |
| 0e7a29a8 | 258 | select IMX_HAVE_PLATFORM_MXC_NAND |
| ae71a562 | 259 | select IMX_HAVE_PLATFORM_MXC_W1 |
| 7536cf99 | 260 | select IMX_HAVE_PLATFORM_SPI_IMX |
| 794987ac | 261 | select USB_ULPI_VIEWPORT if USB_ULPI |
| b1b3f49c | 262 | select SOC_IMX27 |
| 7e5e9f54 JB |
263 | help |
| 264 | Include support for phyCORE-i.MX27 (aka pcm038) platform. This | |
| 265 | includes specific configurations for the module and its peripherals. | |
| ff6552e4 JB |
266 | |
| 267 | choice | |
| 268 | prompt "Baseboard" | |
| 269 | depends on MACH_PCM038 | |
| 270 | default MACH_PCM970_BASEBOARD | |
| 271 | ||
| 272 | config MACH_PCM970_BASEBOARD | |
| ad851bff UKK |
273 | bool "PHYTEC PCM970 development board" |
| 274 | select IMX_HAVE_PLATFORM_IMX_FB | |
| 9d3d945a | 275 | select IMX_HAVE_PLATFORM_MXC_MMC |
| ff6552e4 JB |
276 | help |
| 277 | This adds board specific devices that can be found on Phytec's | |
| 278 | PCM970 evaluation board. | |
| 279 | ||
| 280 | endchoice | |
| 6bbdbf2f | 281 | |
| bc727390 | 282 | config MACH_CPUIMX27 |
| af5b1df7 | 283 | bool "Eukrea CPUIMX27 module" |
| bd455ed3 | 284 | select IMX_HAVE_PLATFORM_FSL_USB2_UDC |
| e0a1961d | 285 | select IMX_HAVE_PLATFORM_IMX2_WDT |
| c6987159 | 286 | select IMX_HAVE_PLATFORM_IMX_I2C |
| d5dac4a6 | 287 | select IMX_HAVE_PLATFORM_IMX_UART |
| 2eb42d5c | 288 | select IMX_HAVE_PLATFORM_MXC_EHCI |
| 0e7a29a8 | 289 | select IMX_HAVE_PLATFORM_MXC_NAND |
| ae71a562 | 290 | select IMX_HAVE_PLATFORM_MXC_W1 |
| 794987ac | 291 | select USB_ULPI_VIEWPORT if USB_ULPI |
| b1b3f49c | 292 | select SOC_IMX27 |
| af5b1df7 EB |
293 | help |
| 294 | Include support for Eukrea CPUIMX27 platform. This includes | |
| 295 | specific configurations for the module and its peripherals. | |
| 296 | ||
| 297 | config MACH_EUKREA_CPUIMX27_USESDHC2 | |
| 298 | bool "CPUIMX27 integrates SDHC2 module" | |
| bc727390 | 299 | depends on MACH_CPUIMX27 |
| 9d3d945a | 300 | select IMX_HAVE_PLATFORM_MXC_MMC |
| af5b1df7 | 301 | help |
| 2d66c780 | 302 | This adds support for the internal SDHC2 used on CPUIMX27 |
| af5b1df7 EB |
303 | for wifi or eMMC. |
| 304 | ||
| 2d66c780 EB |
305 | config MACH_EUKREA_CPUIMX27_USEUART4 |
| 306 | bool "CPUIMX27 integrates UART4 module" | |
| 307 | depends on MACH_CPUIMX27 | |
| 308 | help | |
| 309 | This adds support for the internal UART4 used on CPUIMX27 | |
| 310 | for bluetooth. | |
| 311 | ||
| a961bf38 EB |
312 | choice |
| 313 | prompt "Baseboard" | |
| bc727390 | 314 | depends on MACH_CPUIMX27 |
| a961bf38 EB |
315 | default MACH_EUKREA_MBIMX27_BASEBOARD |
| 316 | ||
| 317 | config MACH_EUKREA_MBIMX27_BASEBOARD | |
| 4697bb92 | 318 | bool "Eukrea MBIMX27 development board" |
| ad851bff | 319 | select IMX_HAVE_PLATFORM_IMX_FB |
| 3f880141 | 320 | select IMX_HAVE_PLATFORM_IMX_KEYPAD |
| 4697bb92 | 321 | select IMX_HAVE_PLATFORM_IMX_SSI |
| d5dac4a6 | 322 | select IMX_HAVE_PLATFORM_IMX_UART |
| 9d3d945a | 323 | select IMX_HAVE_PLATFORM_MXC_MMC |
| 7536cf99 | 324 | select IMX_HAVE_PLATFORM_SPI_IMX |
| 47e837b5 | 325 | select LEDS_GPIO_REGISTER |
| a961bf38 EB |
326 | help |
| 327 | This adds board specific devices that can be found on Eukrea's | |
| 328 | MBIMX27 evaluation board. | |
| 329 | ||
| 330 | endchoice | |
| 331 | ||
| ec9be0de FE |
332 | config MACH_MX27_3DS |
| 333 | bool "MX27PDK platform" | |
| 96cf4239 | 334 | select IMX_HAVE_PLATFORM_FSL_USB2_UDC |
| 8be9252f | 335 | select IMX_HAVE_PLATFORM_IMX2_WDT |
| 1abcb4cc | 336 | select IMX_HAVE_PLATFORM_IMX_FB |
| 5885f036 | 337 | select IMX_HAVE_PLATFORM_IMX_I2C |
| 3f880141 | 338 | select IMX_HAVE_PLATFORM_IMX_KEYPAD |
| 688b5cbb | 339 | select IMX_HAVE_PLATFORM_IMX_SSI |
| d5dac4a6 | 340 | select IMX_HAVE_PLATFORM_IMX_UART |
| 4c11c286 | 341 | select IMX_HAVE_PLATFORM_MX2_CAMERA |
| 96cf4239 | 342 | select IMX_HAVE_PLATFORM_MXC_EHCI |
| 9d3d945a | 343 | select IMX_HAVE_PLATFORM_MXC_MMC |
| c67a3e09 | 344 | select IMX_HAVE_PLATFORM_SPI_IMX |
| 92cb33f1 | 345 | select MXC_DEBUG_BOARD |
| 794987ac | 346 | select USB_ULPI_VIEWPORT if USB_ULPI |
| b1b3f49c | 347 | select SOC_IMX27 |
| ec9be0de FE |
348 | help |
| 349 | Include support for MX27PDK platform. This includes specific | |
| 350 | configurations for the board and its peripherals. | |
| 8c032ec3 | 351 | |
| 3b161e51 JM |
352 | config MACH_IMX27_VISSTRIM_M10 |
| 353 | bool "Vista Silicon i.MX27 Visstrim_m10" | |
| 5309498a | 354 | select IMX_HAVE_PLATFORM_GPIO_KEYS |
| 3b161e51 | 355 | select IMX_HAVE_PLATFORM_IMX_I2C |
| 5658bff6 | 356 | select IMX_HAVE_PLATFORM_IMX_SSI |
| 3b161e51 | 357 | select IMX_HAVE_PLATFORM_IMX_UART |
| f52f5a55 | 358 | select IMX_HAVE_PLATFORM_MX2_CAMERA |
| 3ab3a350 | 359 | select IMX_HAVE_PLATFORM_MX2_EMMA |
| 2eb42d5c | 360 | select IMX_HAVE_PLATFORM_MXC_EHCI |
| 32189139 | 361 | select IMX_HAVE_PLATFORM_MXC_MMC |
| acb6464c | 362 | select LEDS_GPIO_REGISTER |
| b1b3f49c | 363 | select SOC_IMX27 |
| 3b161e51 JM |
364 | help |
| 365 | Include support for Visstrim_m10 platform and its different variants. | |
| 366 | This includes specific configurations for the board and its | |
| 367 | peripherals. | |
| 368 | ||
| f747f935 | 369 | config MACH_IMX27LITE |
| 8c032ec3 | 370 | bool "LogicPD MX27 LITEKIT platform" |
| a5e2051b | 371 | select IMX_HAVE_PLATFORM_IMX_SSI |
| b1b3f49c RK |
372 | select IMX_HAVE_PLATFORM_IMX_UART |
| 373 | select SOC_IMX27 | |
| 8c032ec3 DS |
374 | help |
| 375 | Include support for MX27 LITEKIT platform. This includes specific | |
| 376 | configurations for the board and its peripherals. | |
| 377 | ||
| 33731698 LF |
378 | config MACH_PCA100 |
| 379 | bool "Phytec phyCARD-s (pca100)" | |
| bd455ed3 | 380 | select IMX_HAVE_PLATFORM_FSL_USB2_UDC |
| e0a1961d | 381 | select IMX_HAVE_PLATFORM_IMX2_WDT |
| ad851bff | 382 | select IMX_HAVE_PLATFORM_IMX_FB |
| c6987159 | 383 | select IMX_HAVE_PLATFORM_IMX_I2C |
| 4697bb92 | 384 | select IMX_HAVE_PLATFORM_IMX_SSI |
| d5dac4a6 | 385 | select IMX_HAVE_PLATFORM_IMX_UART |
| 2eb42d5c | 386 | select IMX_HAVE_PLATFORM_MXC_EHCI |
| 9d3d945a | 387 | select IMX_HAVE_PLATFORM_MXC_MMC |
| 0e7a29a8 | 388 | select IMX_HAVE_PLATFORM_MXC_NAND |
| ae71a562 | 389 | select IMX_HAVE_PLATFORM_MXC_W1 |
| 7536cf99 | 390 | select IMX_HAVE_PLATFORM_SPI_IMX |
| 794987ac | 391 | select USB_ULPI_VIEWPORT if USB_ULPI |
| b1b3f49c | 392 | select SOC_IMX27 |
| 33731698 LF |
393 | help |
| 394 | Include support for phyCARD-s (aka pca100) platform. This | |
| 395 | includes specific configurations for the module and its peripherals. | |
| 396 | ||
| 143a179d ACA |
397 | config MACH_MXT_TD60 |
| 398 | bool "Maxtrack i-MXT TD60" | |
| ad851bff | 399 | select IMX_HAVE_PLATFORM_IMX_FB |
| c6987159 | 400 | select IMX_HAVE_PLATFORM_IMX_I2C |
| d5dac4a6 | 401 | select IMX_HAVE_PLATFORM_IMX_UART |
| 9d3d945a | 402 | select IMX_HAVE_PLATFORM_MXC_MMC |
| 0e7a29a8 | 403 | select IMX_HAVE_PLATFORM_MXC_NAND |
| b1b3f49c | 404 | select SOC_IMX27 |
| 143a179d ACA |
405 | help |
| 406 | Include support for i-MXT (aka td60) platform. This | |
| 407 | includes specific configurations for the module and its peripherals. | |
| 408 | ||
| 9c2c3584 FE |
409 | config MACH_IMX27IPCAM |
| 410 | bool "IMX27 IPCAM platform" | |
| 9c2c3584 FE |
411 | select IMX_HAVE_PLATFORM_IMX2_WDT |
| 412 | select IMX_HAVE_PLATFORM_IMX_UART | |
| b1b3f49c | 413 | select SOC_IMX27 |
| 9c2c3584 FE |
414 | help |
| 415 | Include support for IMX27 IPCAM platform. This includes specific | |
| 416 | configurations for the board and its peripherals. | |
| 417 | ||
| 9f0749e3 SH |
418 | config MACH_IMX27_DT |
| 419 | bool "Support i.MX27 platforms from device tree" | |
| 420 | select SOC_IMX27 | |
| 9f0749e3 SH |
421 | help |
| 422 | Include support for Freescale i.MX27 based platforms | |
| 423 | using the device tree for discovery | |
| 424 | ||
| 6bbdbf2f | 425 | endif |
| 27ad4bf7 | 426 | |
| c5a0d497 | 427 | if ARCH_MULTI_V6 |
| 27ad4bf7 UKK |
428 | |
| 429 | comment "MX31 platforms:" | |
| 430 | ||
| 431 | config MACH_MX31ADS | |
| 432 | bool "Support MX31ADS platforms" | |
| b1b3f49c | 433 | default y |
| 27ad4bf7 UKK |
434 | select IMX_HAVE_PLATFORM_IMX_I2C |
| 435 | select IMX_HAVE_PLATFORM_IMX_SSI | |
| 436 | select IMX_HAVE_PLATFORM_IMX_UART | |
| b1b3f49c | 437 | select SOC_IMX31 |
| 27ad4bf7 UKK |
438 | help |
| 439 | Include support for MX31ADS platform. This includes specific | |
| 440 | configurations for the board and its peripherals. | |
| 441 | ||
| 442 | config MACH_MX31ADS_WM1133_EV1 | |
| 443 | bool "Support Wolfson Microelectronics 1133-EV1 module" | |
| 444 | depends on MACH_MX31ADS | |
| 445 | depends on MFD_WM8350_I2C | |
| 69eb383a | 446 | depends on REGULATOR_WM8350 = y |
| 27ad4bf7 UKK |
447 | help |
| 448 | Include support for the Wolfson Microelectronics 1133-EV1 PMU | |
| 449 | and audio module for the MX31ADS platform. | |
| 450 | ||
| 451 | config MACH_MX31LILLY | |
| 452 | bool "Support MX31 LILLY-1131 platforms (INCO startec)" | |
| 27ad4bf7 UKK |
453 | select IMX_HAVE_PLATFORM_IMX_UART |
| 454 | select IMX_HAVE_PLATFORM_IPU_CORE | |
| 455 | select IMX_HAVE_PLATFORM_MXC_EHCI | |
| 456 | select IMX_HAVE_PLATFORM_MXC_MMC | |
| 457 | select IMX_HAVE_PLATFORM_SPI_IMX | |
| 794987ac | 458 | select USB_ULPI_VIEWPORT if USB_ULPI |
| b1b3f49c | 459 | select SOC_IMX31 |
| 27ad4bf7 UKK |
460 | help |
| 461 | Include support for mx31 based LILLY1131 modules. This includes | |
| 462 | specific configurations for the board and its peripherals. | |
| 463 | ||
| 464 | config MACH_MX31LITE | |
| 465 | bool "Support MX31 LITEKIT (LogicPD)" | |
| 27ad4bf7 UKK |
466 | select IMX_HAVE_PLATFORM_IMX2_WDT |
| 467 | select IMX_HAVE_PLATFORM_IMX_UART | |
| 468 | select IMX_HAVE_PLATFORM_MXC_EHCI | |
| 469 | select IMX_HAVE_PLATFORM_MXC_MMC | |
| 470 | select IMX_HAVE_PLATFORM_MXC_NAND | |
| 471 | select IMX_HAVE_PLATFORM_MXC_RTC | |
| 472 | select IMX_HAVE_PLATFORM_SPI_IMX | |
| 47e837b5 | 473 | select LEDS_GPIO_REGISTER |
| 794987ac | 474 | select USB_ULPI_VIEWPORT if USB_ULPI |
| b1b3f49c | 475 | select SOC_IMX31 |
| 27ad4bf7 UKK |
476 | help |
| 477 | Include support for MX31 LITEKIT platform. This includes specific | |
| 478 | configurations for the board and its peripherals. | |
| 479 | ||
| 480 | config MACH_PCM037 | |
| 481 | bool "Support Phytec pcm037 (i.MX31) platforms" | |
| 27ad4bf7 UKK |
482 | select IMX_HAVE_PLATFORM_FSL_USB2_UDC |
| 483 | select IMX_HAVE_PLATFORM_IMX2_WDT | |
| 484 | select IMX_HAVE_PLATFORM_IMX_I2C | |
| 485 | select IMX_HAVE_PLATFORM_IMX_UART | |
| 486 | select IMX_HAVE_PLATFORM_IPU_CORE | |
| 487 | select IMX_HAVE_PLATFORM_MXC_EHCI | |
| 488 | select IMX_HAVE_PLATFORM_MXC_MMC | |
| 489 | select IMX_HAVE_PLATFORM_MXC_NAND | |
| 490 | select IMX_HAVE_PLATFORM_MXC_W1 | |
| 794987ac | 491 | select USB_ULPI_VIEWPORT if USB_ULPI |
| b1b3f49c | 492 | select SOC_IMX31 |
| 27ad4bf7 UKK |
493 | help |
| 494 | Include support for Phytec pcm037 platform. This includes | |
| 495 | specific configurations for the board and its peripherals. | |
| 496 | ||
| 497 | config MACH_PCM037_EET | |
| 498 | bool "Support pcm037 EET board extensions" | |
| 499 | depends on MACH_PCM037 | |
| 500 | select IMX_HAVE_PLATFORM_GPIO_KEYS | |
| 501 | select IMX_HAVE_PLATFORM_SPI_IMX | |
| 502 | help | |
| 503 | Add support for PCM037 EET baseboard extensions. If you are using the | |
| 504 | OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel | |
| 505 | command-line parameter. | |
| 506 | ||
| 507 | config MACH_MX31_3DS | |
| 508 | bool "Support MX31PDK (3DS)" | |
| 27ad4bf7 UKK |
509 | select IMX_HAVE_PLATFORM_FSL_USB2_UDC |
| 510 | select IMX_HAVE_PLATFORM_IMX2_WDT | |
| 511 | select IMX_HAVE_PLATFORM_IMX_I2C | |
| 512 | select IMX_HAVE_PLATFORM_IMX_KEYPAD | |
| 3ef7cf18 | 513 | select IMX_HAVE_PLATFORM_IMX_SSI |
| 27ad4bf7 UKK |
514 | select IMX_HAVE_PLATFORM_IMX_UART |
| 515 | select IMX_HAVE_PLATFORM_IPU_CORE | |
| 516 | select IMX_HAVE_PLATFORM_MXC_EHCI | |
| d093d5bb | 517 | select IMX_HAVE_PLATFORM_MXC_MMC |
| 27ad4bf7 UKK |
518 | select IMX_HAVE_PLATFORM_MXC_NAND |
| 519 | select IMX_HAVE_PLATFORM_SPI_IMX | |
| b1b3f49c | 520 | select MXC_DEBUG_BOARD |
| 794987ac | 521 | select USB_ULPI_VIEWPORT if USB_ULPI |
| b1b3f49c | 522 | select SOC_IMX31 |
| 27ad4bf7 UKK |
523 | help |
| 524 | Include support for MX31PDK (3DS) platform. This includes specific | |
| 525 | configurations for the board and its peripherals. | |
| 526 | ||
| 527 | config MACH_MX31_3DS_MXC_NAND_USE_BBT | |
| 528 | bool "Make the MXC NAND driver use the in flash Bad Block Table" | |
| 529 | depends on MACH_MX31_3DS | |
| 530 | depends on MTD_NAND_MXC | |
| 531 | help | |
| 532 | Enable this if you want that the MXC NAND driver uses the in flash | |
| 533 | Bad Block Table to know what blocks are bad instead of scanning the | |
| 534 | entire flash looking for bad block markers. | |
| 535 | ||
| 536 | config MACH_MX31MOBOARD | |
| 537 | bool "Support mx31moboard platforms (EPFL Mobots group)" | |
| 27ad4bf7 | 538 | select IMX_HAVE_PLATFORM_FSL_USB2_UDC |
| 31776fbc | 539 | select IMX_HAVE_PLATFORM_IMX2_WDT |
| 27ad4bf7 | 540 | select IMX_HAVE_PLATFORM_IMX_I2C |
| 2f7b9451 | 541 | select IMX_HAVE_PLATFORM_IMX_SSI |
| 27ad4bf7 UKK |
542 | select IMX_HAVE_PLATFORM_IMX_UART |
| 543 | select IMX_HAVE_PLATFORM_IPU_CORE | |
| 544 | select IMX_HAVE_PLATFORM_MXC_EHCI | |
| 545 | select IMX_HAVE_PLATFORM_MXC_MMC | |
| 546 | select IMX_HAVE_PLATFORM_SPI_IMX | |
| 47e837b5 | 547 | select LEDS_GPIO_REGISTER |
| 794987ac | 548 | select USB_ULPI_VIEWPORT if USB_ULPI |
| b1b3f49c | 549 | select SOC_IMX31 |
| 27ad4bf7 UKK |
550 | help |
| 551 | Include support for mx31moboard platform. This includes specific | |
| 552 | configurations for the board and its peripherals. | |
| 553 | ||
| 554 | config MACH_QONG | |
| 555 | bool "Support Dave/DENX QongEVB-LITE platform" | |
| bbb43363 | 556 | select IMX_HAVE_PLATFORM_IMX2_WDT |
| b1b3f49c RK |
557 | select IMX_HAVE_PLATFORM_IMX_UART |
| 558 | select SOC_IMX31 | |
| 27ad4bf7 UKK |
559 | help |
| 560 | Include support for Dave/DENX QongEVB-LITE platform. This includes | |
| 561 | specific configurations for the board and its peripherals. | |
| 562 | ||
| 563 | config MACH_ARMADILLO5X0 | |
| 564 | bool "Support Atmark Armadillo-500 Development Base Board" | |
| 27ad4bf7 UKK |
565 | select IMX_HAVE_PLATFORM_GPIO_KEYS |
| 566 | select IMX_HAVE_PLATFORM_IMX_I2C | |
| 567 | select IMX_HAVE_PLATFORM_IMX_UART | |
| 568 | select IMX_HAVE_PLATFORM_IPU_CORE | |
| 569 | select IMX_HAVE_PLATFORM_MXC_EHCI | |
| 570 | select IMX_HAVE_PLATFORM_MXC_MMC | |
| 571 | select IMX_HAVE_PLATFORM_MXC_NAND | |
| 794987ac | 572 | select USB_ULPI_VIEWPORT if USB_ULPI |
| b1b3f49c | 573 | select SOC_IMX31 |
| 27ad4bf7 UKK |
574 | help |
| 575 | Include support for Atmark Armadillo-500 platform. This includes | |
| 576 | specific configurations for the board and its peripherals. | |
| 577 | ||
| 578 | config MACH_KZM_ARM11_01 | |
| 579 | bool "Support KZM-ARM11-01(Kyoto Microcomputer)" | |
| 27ad4bf7 | 580 | select IMX_HAVE_PLATFORM_IMX_UART |
| b1b3f49c | 581 | select SOC_IMX31 |
| 27ad4bf7 UKK |
582 | help |
| 583 | Include support for KZM-ARM11-01. This includes specific | |
| 584 | configurations for the board and its peripherals. | |
| 585 | ||
| 586 | config MACH_BUG | |
| 587 | bool "Support Buglabs BUGBase platform" | |
| 27ad4bf7 | 588 | default y |
| b1b3f49c RK |
589 | select IMX_HAVE_PLATFORM_IMX_UART |
| 590 | select SOC_IMX31 | |
| 27ad4bf7 UKK |
591 | help |
| 592 | Include support for BUGBase 1.3 platform. This includes specific | |
| 593 | configurations for the board and its peripherals. | |
| 594 | ||
| d2a37b3d DGC |
595 | config MACH_IMX31_DT |
| 596 | bool "Support i.MX31 platforms from device tree" | |
| 597 | select SOC_IMX31 | |
| d2a37b3d DGC |
598 | help |
| 599 | Include support for Freescale i.MX31 based platforms | |
| 600 | using the device tree for discovery. | |
| 601 | ||
| 27ad4bf7 UKK |
602 | comment "MX35 platforms:" |
| 603 | ||
| a55a3d72 ST |
604 | config MACH_IMX35_DT |
| 605 | bool "Support i.MX35 platforms from device tree" | |
| 606 | select SOC_IMX35 | |
| 607 | help | |
| 608 | Include support for Freescale i.MX35 based platforms | |
| 609 | using the device tree for discovery. | |
| 610 | ||
| 27ad4bf7 UKK |
611 | config MACH_PCM043 |
| 612 | bool "Support Phytec pcm043 (i.MX35) platforms" | |
| 27ad4bf7 UKK |
613 | select IMX_HAVE_PLATFORM_FLEXCAN |
| 614 | select IMX_HAVE_PLATFORM_FSL_USB2_UDC | |
| 615 | select IMX_HAVE_PLATFORM_IMX2_WDT | |
| 616 | select IMX_HAVE_PLATFORM_IMX_I2C | |
| 617 | select IMX_HAVE_PLATFORM_IMX_SSI | |
| 618 | select IMX_HAVE_PLATFORM_IMX_UART | |
| 619 | select IMX_HAVE_PLATFORM_IPU_CORE | |
| 620 | select IMX_HAVE_PLATFORM_MXC_EHCI | |
| 621 | select IMX_HAVE_PLATFORM_MXC_NAND | |
| 622 | select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX | |
| 794987ac | 623 | select USB_ULPI_VIEWPORT if USB_ULPI |
| b1b3f49c | 624 | select SOC_IMX35 |
| 27ad4bf7 UKK |
625 | help |
| 626 | Include support for Phytec pcm043 platform. This includes | |
| 627 | specific configurations for the board and its peripherals. | |
| 628 | ||
| 629 | config MACH_MX35_3DS | |
| 630 | bool "Support MX35PDK platform" | |
| 27ad4bf7 UKK |
631 | select IMX_HAVE_PLATFORM_FSL_USB2_UDC |
| 632 | select IMX_HAVE_PLATFORM_IMX2_WDT | |
| 8e3e26a8 | 633 | select IMX_HAVE_PLATFORM_IMX_FB |
| 27ad4bf7 UKK |
634 | select IMX_HAVE_PLATFORM_IMX_I2C |
| 635 | select IMX_HAVE_PLATFORM_IMX_UART | |
| 8e3e26a8 | 636 | select IMX_HAVE_PLATFORM_IPU_CORE |
| 27ad4bf7 UKK |
637 | select IMX_HAVE_PLATFORM_MXC_EHCI |
| 638 | select IMX_HAVE_PLATFORM_MXC_NAND | |
| c6fd6d11 | 639 | select IMX_HAVE_PLATFORM_MXC_RTC |
| 27ad4bf7 | 640 | select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX |
| b1b3f49c RK |
641 | select MXC_DEBUG_BOARD |
| 642 | select SOC_IMX35 | |
| 27ad4bf7 UKK |
643 | help |
| 644 | Include support for MX35PDK platform. This includes specific | |
| 645 | configurations for the board and its peripherals. | |
| 646 | ||
| a69aa72a | 647 | config MACH_EUKREA_CPUIMX35SD |
| 27ad4bf7 | 648 | bool "Support Eukrea CPUIMX35 Platform" |
| 27ad4bf7 UKK |
649 | select IMX_HAVE_PLATFORM_FLEXCAN |
| 650 | select IMX_HAVE_PLATFORM_FSL_USB2_UDC | |
| 651 | select IMX_HAVE_PLATFORM_IMX2_WDT | |
| 652 | select IMX_HAVE_PLATFORM_IMX_I2C | |
| 653 | select IMX_HAVE_PLATFORM_IMX_UART | |
| 654 | select IMX_HAVE_PLATFORM_MXC_EHCI | |
| 655 | select IMX_HAVE_PLATFORM_MXC_NAND | |
| 656 | select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX | |
| 794987ac | 657 | select USB_ULPI_VIEWPORT if USB_ULPI |
| b1b3f49c | 658 | select SOC_IMX35 |
| 27ad4bf7 UKK |
659 | help |
| 660 | Include support for Eukrea CPUIMX35 platform. This includes | |
| 661 | specific configurations for the board and its peripherals. | |
| 662 | ||
| 663 | choice | |
| 664 | prompt "Baseboard" | |
| a69aa72a | 665 | depends on MACH_EUKREA_CPUIMX35SD |
| 27ad4bf7 UKK |
666 | default MACH_EUKREA_MBIMXSD35_BASEBOARD |
| 667 | ||
| 668 | config MACH_EUKREA_MBIMXSD35_BASEBOARD | |
| 669 | bool "Eukrea MBIMXSD development board" | |
| 670 | select IMX_HAVE_PLATFORM_GPIO_KEYS | |
| 671 | select IMX_HAVE_PLATFORM_IMX_SSI | |
| 672 | select IMX_HAVE_PLATFORM_IPU_CORE | |
| 0e189858 | 673 | select IMX_HAVE_PLATFORM_SPI_IMX |
| 47e837b5 | 674 | select LEDS_GPIO_REGISTER |
| 27ad4bf7 UKK |
675 | help |
| 676 | This adds board specific devices that can be found on Eukrea's | |
| 677 | MBIMXSD evaluation board. | |
| 678 | ||
| 679 | endchoice | |
| 680 | ||
| 681 | config MACH_VPR200 | |
| 682 | bool "Support VPR200 platform" | |
| 27ad4bf7 UKK |
683 | select IMX_HAVE_PLATFORM_FSL_USB2_UDC |
| 684 | select IMX_HAVE_PLATFORM_GPIO_KEYS | |
| 685 | select IMX_HAVE_PLATFORM_IMX2_WDT | |
| 27ad4bf7 | 686 | select IMX_HAVE_PLATFORM_IMX_I2C |
| b1b3f49c | 687 | select IMX_HAVE_PLATFORM_IMX_UART |
| 27ad4bf7 UKK |
688 | select IMX_HAVE_PLATFORM_IPU_CORE |
| 689 | select IMX_HAVE_PLATFORM_MXC_EHCI | |
| 690 | select IMX_HAVE_PLATFORM_MXC_NAND | |
| 691 | select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX | |
| b1b3f49c | 692 | select SOC_IMX35 |
| 27ad4bf7 UKK |
693 | help |
| 694 | Include support for VPR200 platform. This includes specific | |
| 695 | configurations for the board and its peripherals. | |
| 696 | ||
| c5a0d497 SG |
697 | endif |
| 698 | ||
| 699 | if ARCH_MULTI_V7 | |
| 700 | ||
| 442279da | 701 | comment "Device tree only" |
| 784a90c0 | 702 | |
| 361b0a41 GU |
703 | config SOC_IMX50 |
| 704 | bool "i.MX50 support" | |
| 705 | select HAVE_IMX_SRC | |
| f7f3d4b2 | 706 | select PINCTRL_IMX50 |
| 361b0a41 GU |
707 | select SOC_IMX5 |
| 708 | ||
| 709 | help | |
| 710 | This enables support for Freescale i.MX50 processor. | |
| 711 | ||
| 8da4d6b2 FE |
712 | config MACH_IMX51_DT |
| 713 | bool "i.MX51 support" | |
| 714 | select SOC_IMX51 | |
| 715 | help | |
| 716 | This enables support for Freescale i.MX51 processor | |
| 717 | ||
| 442279da SG |
718 | config SOC_IMX53 |
| 719 | bool "i.MX53 support" | |
| bd3d924d | 720 | select HAVE_IMX_SRC |
| 442279da | 721 | select PINCTRL_IMX53 |
| b1b3f49c | 722 | select SOC_IMX5 |
| 784a90c0 | 723 | |
| 784a90c0 | 724 | help |
| 442279da | 725 | This enables support for Freescale i.MX53 processor. |
| bac89d75 | 726 | |
| 94f890ec SG |
727 | config SOC_IMX6 |
| 728 | bool | |
| 96efb44e | 729 | select ARM_ERRATA_754322 |
| 96efb44e | 730 | select ARM_ERRATA_775420 |
| bac89d75 | 731 | select ARM_GIC |
| e95dddb3 | 732 | select HAVE_IMX_ANATOP |
| 9fbbe689 SG |
733 | select HAVE_IMX_GPC |
| 734 | select HAVE_IMX_MMDC | |
| aec99b7b | 735 | select HAVE_IMX_SRC |
| baa64151 | 736 | select MFD_SYSCON |
| a641f3a6 RK |
737 | select PL310_ERRATA_588369 if CACHE_L2X0 |
| 738 | select PL310_ERRATA_727915 if CACHE_L2X0 | |
| 739 | select PL310_ERRATA_769419 if CACHE_L2X0 | |
| bac89d75 | 740 | |
| 94f890ec SG |
741 | config SOC_IMX6Q |
| 742 | bool "i.MX6 Quad/DualLite support" | |
| 743 | select ARM_ERRATA_764369 if SMP | |
| 744 | select HAVE_ARM_SCU if SMP | |
| 745 | select HAVE_ARM_TWD if SMP | |
| 94f890ec SG |
746 | select PCI_DOMAINS if PCI |
| 747 | select PINCTRL_IMX6Q | |
| 748 | select SOC_IMX6 | |
| 749 | ||
| bac89d75 SG |
750 | help |
| 751 | This enables support for Freescale i.MX6 Quad processor. | |
| 752 | ||
| 31a2fbf7 SG |
753 | config SOC_IMX6SL |
| 754 | bool "i.MX6 SoloLite support" | |
| 31a2fbf7 | 755 | select PINCTRL_IMX6SL |
| 94f890ec | 756 | select SOC_IMX6 |
| 31a2fbf7 SG |
757 | |
| 758 | help | |
| 759 | This enables support for Freescale i.MX6 SoloLite processor. | |
| 760 | ||
| d9654dce SG |
761 | config SOC_IMX6SX |
| 762 | bool "i.MX6 SoloX support" | |
| 763 | select PINCTRL_IMX6SX | |
| 764 | select SOC_IMX6 | |
| 765 | ||
| 766 | help | |
| 767 | This enables support for Freescale i.MX6 SoloX processor. | |
| 768 | ||
| 5be913c6 JL |
769 | config SOC_VF610 |
| 770 | bool "Vybrid Family VF610 support" | |
| 5be913c6 | 771 | select ARM_GIC |
| 5be913c6 JL |
772 | select PINCTRL_VF610 |
| 773 | select VF_PIT_TIMER | |
| a641f3a6 RK |
774 | select PL310_ERRATA_588369 if CACHE_L2X0 |
| 775 | select PL310_ERRATA_727915 if CACHE_L2X0 | |
| 776 | select PL310_ERRATA_769419 if CACHE_L2X0 | |
| 5be913c6 JL |
777 | |
| 778 | help | |
| 779 | This enable support for Freescale Vybrid VF610 processor. | |
| 780 | ||
| 27ad4bf7 | 781 | endif |
| e0557c0d SG |
782 | |
| 783 | source "arch/arm/mach-imx/devices/Kconfig" | |
| 3995eb82 | 784 | |
| 21278aea | 785 | endif |