[deliverable/linux.git] / arch / arm / mach-imx / eukrea_mbimx27-baseboard.c

/*
 * Copyright (C) 2009-2010 Eric Benard - eric@eukrea.com
 *
 * Based on pcm970-baseboard.c which is :
 * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
 * MA 02110-1301, USA.
 */

#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/backlight.h>
#include <video/platform_lcd.h>

#include <asm/mach/arch.h>

#include <mach/common.h>
#include <mach/iomux-mx27.h>
#include <mach/hardware.h>
#include <mach/spi.h>
#include <mach/audmux.h>

#include "devices-imx27.h"
#include "devices.h"

static const int eukrea_mbimx27_pins[] __initconst = {
	/* UART2 */
	PE3_PF_UART2_CTS,
	PE4_PF_UART2_RTS,
	PE6_PF_UART2_TXD,
	PE7_PF_UART2_RXD,
	/* UART3 */
	PE8_PF_UART3_TXD,
	PE9_PF_UART3_RXD,
	PE10_PF_UART3_CTS,
	PE11_PF_UART3_RTS,
	/* UART4 */
#if !defined(MACH_EUKREA_CPUIMX27_USEUART4)
	PB26_AF_UART4_RTS,
	PB28_AF_UART4_TXD,
	PB29_AF_UART4_CTS,
	PB31_AF_UART4_RXD,
#endif
	/* SDHC1*/
	PE18_PF_SD1_D0,
	PE19_PF_SD1_D1,
	PE20_PF_SD1_D2,
	PE21_PF_SD1_D3,
	PE22_PF_SD1_CMD,
	PE23_PF_SD1_CLK,
	/* display */
	PA5_PF_LSCLK,
	PA6_PF_LD0,
	PA7_PF_LD1,
	PA8_PF_LD2,
	PA9_PF_LD3,
	PA10_PF_LD4,
	PA11_PF_LD5,
	PA12_PF_LD6,
	PA13_PF_LD7,
	PA14_PF_LD8,
	PA15_PF_LD9,
	PA16_PF_LD10,
	PA17_PF_LD11,
	PA18_PF_LD12,
	PA19_PF_LD13,
	PA20_PF_LD14,
	PA21_PF_LD15,
	PA22_PF_LD16,
	PA23_PF_LD17,
	PA28_PF_HSYNC,
	PA29_PF_VSYNC,
	PA30_PF_CONTRAST,
	PA31_PF_OE_ACD,
	/* SPI1 */
	PD29_PF_CSPI1_SCLK,
	PD30_PF_CSPI1_MISO,
	PD31_PF_CSPI1_MOSI,
	/* SSI4 */
#if defined(CONFIG_SND_SOC_EUKREA_TLV320) \
	|| defined(CONFIG_SND_SOC_EUKREA_TLV320_MODULE)
	PC16_PF_SSI4_FS,
	PC17_PF_SSI4_RXD | GPIO_PUEN,
	PC18_PF_SSI4_TXD | GPIO_PUEN,
	PC19_PF_SSI4_CLK,
#endif
};

static const uint32_t eukrea_mbimx27_keymap[] = {
	KEY(0, 0, KEY_UP),
	KEY(0, 1, KEY_DOWN),
	KEY(1, 0, KEY_RIGHT),
	KEY(1, 1, KEY_LEFT),
};

static const struct matrix_keymap_data
eukrea_mbimx27_keymap_data __initconst = {
	.keymap         = eukrea_mbimx27_keymap,
	.keymap_size    = ARRAY_SIZE(eukrea_mbimx27_keymap),
};

static struct gpio_led gpio_leds[] = {
	{
		.name			= "led1",
		.default_trigger	= "heartbeat",
		.active_low		= 1,
		.gpio			= GPIO_PORTF | 16,
	},
	{
		.name			= "led2",
		.default_trigger	= "none",
		.active_low		= 1,
		.gpio			= GPIO_PORTF | 19,
	},
};

static struct gpio_led_platform_data gpio_led_info = {
	.leds		= gpio_leds,
	.num_leds	= ARRAY_SIZE(gpio_leds),
};

static struct platform_device leds_gpio = {
	.name	= "leds-gpio",
	.id	= -1,
	.dev	= {
		.platform_data	= &gpio_led_info,
	},
};

static struct imx_fb_videomode eukrea_mbimx27_modes[] = {
	{
		.mode = {
			.name		= "CMO-QVGA",
			.refresh	= 60,
			.xres		= 320,
			.yres		= 240,
			.pixclock	= 156000,
			.hsync_len	= 30,
			.left_margin	= 38,
			.right_margin	= 20,
			.vsync_len	= 3,
			.upper_margin	= 15,
			.lower_margin	= 4,
		},
		.pcr		= 0xFAD08B80,
		.bpp		= 16,
	}, {
		.mode = {
			.name		= "DVI-VGA",
			.refresh	= 60,
			.xres		= 640,
			.yres		= 480,
			.pixclock	= 32000,
			.hsync_len	= 1,
			.left_margin	= 35,
			.right_margin	= 0,
			.vsync_len	= 1,
			.upper_margin	= 7,
			.lower_margin	= 0,
		},
		.pcr		= 0xFA208B80,
		.bpp		= 16,
	}, {
		.mode = {
			.name		= "DVI-SVGA",
			.refresh	= 60,
			.xres		= 800,
			.yres		= 600,
			.pixclock	= 25000,
			.hsync_len	= 1,
			.left_margin	= 35,
			.right_margin	= 0,
			.vsync_len	= 1,
			.upper_margin	= 7,
			.lower_margin	= 0,
		},
		.pcr		= 0xFA208B80,
		.bpp		= 16,
	},
};

static const struct imx_fb_platform_data eukrea_mbimx27_fb_data __initconst = {
	.mode = eukrea_mbimx27_modes,
	.num_modes = ARRAY_SIZE(eukrea_mbimx27_modes),

	.pwmr		= 0x00A903FF,
	.lscr1		= 0x00120300,
	.dmacr		= 0x00040060,
};

static void eukrea_mbimx27_bl_set_intensity(int intensity)
{
	if (intensity)
		gpio_direction_output(GPIO_PORTE | 5, 1);
	else
		gpio_direction_output(GPIO_PORTE | 5, 0);
}

static struct generic_bl_info eukrea_mbimx27_bl_info = {
	.name			= "eukrea_mbimx27-bl",
	.max_intensity		= 0xff,
	.default_intensity	= 0xff,
	.set_bl_intensity	= eukrea_mbimx27_bl_set_intensity,
};

static struct platform_device eukrea_mbimx27_bl_dev = {
	.name			= "generic-bl",
	.id			= 1,
	.dev = {
		.platform_data	= &eukrea_mbimx27_bl_info,
	},
};

static void eukrea_mbimx27_lcd_power_set(struct plat_lcd_data *pd,
				   unsigned int power)
{
	if (power)
		gpio_direction_output(GPIO_PORTA | 25, 1);
	else
		gpio_direction_output(GPIO_PORTA | 25, 0);
}

static struct plat_lcd_data eukrea_mbimx27_lcd_power_data = {
	.set_power		= eukrea_mbimx27_lcd_power_set,
};

static struct platform_device eukrea_mbimx27_lcd_powerdev = {
	.name			= "platform-lcd",
	.dev.platform_data	= &eukrea_mbimx27_lcd_power_data,
};

static const struct imxuart_platform_data uart_pdata __initconst = {
	.flags = IMXUART_HAVE_RTSCTS,
};

#if defined(CONFIG_TOUCHSCREEN_ADS7846) \
	|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)

#define ADS7846_PENDOWN (GPIO_PORTD | 25)

static void ads7846_dev_init(void)
{
	if (gpio_request(ADS7846_PENDOWN, "ADS7846 pendown") < 0) {
		printk(KERN_ERR "can't get ads746 pen down GPIO\n");
		return;
	}
	gpio_direction_input(ADS7846_PENDOWN);
}

static int ads7846_get_pendown_state(void)
{
	return !gpio_get_value(ADS7846_PENDOWN);
}

static struct ads7846_platform_data ads7846_config __initdata = {
	.get_pendown_state	= ads7846_get_pendown_state,
	.keep_vref_on		= 1,
};
#endif

#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
static struct spi_board_info eukrea_mbimx27_spi_board_info[] __initdata = {
	[0] = {
		.modalias	= "ads7846",
		.bus_num	= 0,
		.chip_select	= 0,
		.max_speed_hz	= 1500000,
		.irq		= IRQ_GPIOD(25),
		.platform_data	= &ads7846_config,
		.mode           = SPI_MODE_2,
	},
};

static int eukrea_mbimx27_spi_cs[] = {GPIO_PORTD | 28};

static const struct spi_imx_master eukrea_mbimx27_spi0_data __initconst = {
	.chipselect	= eukrea_mbimx27_spi_cs,
	.num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs),
};
#endif

static struct i2c_board_info eukrea_mbimx27_i2c_devices[] = {
	{
		I2C_BOARD_INFO("tlv320aic23", 0x1a),
	},
};

static struct platform_device *platform_devices[] __initdata = {
	&leds_gpio,
};

static const struct imxmmc_platform_data sdhc_pdata __initconst = {
	.dat3_card_detect = 1,
};

static const
struct imx_ssi_platform_data eukrea_mbimx27_ssi_pdata __initconst = {
	.flags = IMX_SSI_DMA | IMX_SSI_USE_I2S_SLAVE,
};

/*
 * system init for baseboard usage. Will be called by cpuimx27 init.
 *
 * Add platform devices present on this baseboard and init
 * them from CPU side as far as required to use them later on
 */
void __init eukrea_mbimx27_baseboard_init(void)
{
	mxc_gpio_setup_multiple_pins(eukrea_mbimx27_pins,
		ARRAY_SIZE(eukrea_mbimx27_pins), "MBIMX27");

#if defined(CONFIG_SND_SOC_EUKREA_TLV320) \
	|| defined(CONFIG_SND_SOC_EUKREA_TLV320_MODULE)
	/* SSI unit master I2S codec connected to SSI_PINS_4*/
	mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0,
			MXC_AUDMUX_V1_PCR_SYN |
			MXC_AUDMUX_V1_PCR_TFSDIR |
			MXC_AUDMUX_V1_PCR_TCLKDIR |
			MXC_AUDMUX_V1_PCR_RFSDIR |
			MXC_AUDMUX_V1_PCR_RCLKDIR |
			MXC_AUDMUX_V1_PCR_TFCSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4) |
			MXC_AUDMUX_V1_PCR_RFCSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4) |
			MXC_AUDMUX_V1_PCR_RXDSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4)
	);
	mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR3_SSI_PINS_4,
			MXC_AUDMUX_V1_PCR_SYN |
			MXC_AUDMUX_V1_PCR_RXDSEL(MX27_AUDMUX_HPCR1_SSI0)
	);
#endif

	imx27_add_imx_uart1(&uart_pdata);
	imx27_add_imx_uart2(&uart_pdata);
#if !defined(MACH_EUKREA_CPUIMX27_USEUART4)
	imx27_add_imx_uart3(&uart_pdata);
#endif

	imx27_add_imx_fb(&eukrea_mbimx27_fb_data);
	imx27_add_mxc_mmc(0, &sdhc_pdata);

	i2c_register_board_info(0, eukrea_mbimx27_i2c_devices,
				ARRAY_SIZE(eukrea_mbimx27_i2c_devices));

	imx27_add_imx_ssi(0, &eukrea_mbimx27_ssi_pdata);

#if defined(CONFIG_TOUCHSCREEN_ADS7846) \
	|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
	/* ADS7846 Touchscreen controller init */
	mxc_gpio_mode(GPIO_PORTD | 25 | GPIO_GPIO | GPIO_IN);
	ads7846_dev_init();
#endif

#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
	/* SPI_CS0 init */
	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
	imx27_add_spi_imx0(&eukrea_mbimx27_spi0_data);
	spi_register_board_info(eukrea_mbimx27_spi_board_info,
			ARRAY_SIZE(eukrea_mbimx27_spi_board_info));
#endif

	/* Leds configuration */
	mxc_gpio_mode(GPIO_PORTF | 16 | GPIO_GPIO | GPIO_OUT);
	mxc_gpio_mode(GPIO_PORTF | 19 | GPIO_GPIO | GPIO_OUT);
	/* Backlight */
	mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_OUT);
	gpio_request(GPIO_PORTE | 5, "backlight");
	platform_device_register(&eukrea_mbimx27_bl_dev);
	/* LCD Reset */
	mxc_gpio_mode(GPIO_PORTA | 25 | GPIO_GPIO | GPIO_OUT);
	gpio_request(GPIO_PORTA | 25, "lcd_enable");
	platform_device_register(&eukrea_mbimx27_lcd_powerdev);

	imx27_add_imx_keypad(&eukrea_mbimx27_keymap_data);

	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
}
Commit	Line	Data
a961bf38	1	/*
d2195d52	2	* Copyright (C) 2009-2010 Eric Benard - eric@eukrea.com
a961bf38 EB	3	*
	4	* Based on pcm970-baseboard.c which is :
	5	* Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
	6	*
	7	* This program is free software; you can redistribute it and/or
	8	* modify it under the terms of the GNU General Public License
	9	* as published by the Free Software Foundation; either version 2
	10	* of the License, or (at your option) any later version.
	11	* This program is distributed in the hope that it will be useful,
	12	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	13	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	14	* GNU General Public License for more details.
	15	*
	16	* You should have received a copy of the GNU General Public License
	17	* along with this program; if not, write to the Free Software
	18	* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
	19	* MA 02110-1301, USA.
	20	*/
	21
	22	#include <linux/gpio.h>
	23	#include <linux/irq.h>
	24	#include <linux/platform_device.h>
	25	#include <linux/spi/spi.h>
	26	#include <linux/spi/ads7846.h>
fc04ad0e EB	27	#include <linux/backlight.h>
fc04ad0e EB	28	#include <video/platform_lcd.h>
a961bf38 EB	29
	30	#include <asm/mach/arch.h>
	31
	32	#include <mach/common.h>
e835d88e	33	#include <mach/iomux-mx27.h>
a961bf38	34	#include <mach/hardware.h>
62d725b1	35	#include <mach/spi.h>
d2195d52	36	#include <mach/audmux.h>
a961bf38	37
7536cf99	38	#include "devices-imx27.h"
a961bf38 EB	39	#include "devices.h"
a961bf38 EB	40
6c80ee51	41	static const int eukrea_mbimx27_pins[] __initconst = {
a961bf38 EB	42	/* UART2 */
	43	PE3_PF_UART2_CTS,
	44	PE4_PF_UART2_RTS,
	45	PE6_PF_UART2_TXD,
	46	PE7_PF_UART2_RXD,
	47	/* UART3 */
	48	PE8_PF_UART3_TXD,
	49	PE9_PF_UART3_RXD,
	50	PE10_PF_UART3_CTS,
	51	PE11_PF_UART3_RTS,
	52	/* UART4 */
2d66c780	53	#if !defined(MACH_EUKREA_CPUIMX27_USEUART4)
a961bf38 EB	54	PB26_AF_UART4_RTS,
	55	PB28_AF_UART4_TXD,
	56	PB29_AF_UART4_CTS,
	57	PB31_AF_UART4_RXD,
2d66c780	58	#endif
a961bf38 EB	59	/* SDHC1*/
	60	PE18_PF_SD1_D0,
	61	PE19_PF_SD1_D1,
	62	PE20_PF_SD1_D2,
	63	PE21_PF_SD1_D3,
	64	PE22_PF_SD1_CMD,
	65	PE23_PF_SD1_CLK,
	66	/* display */
	67	PA5_PF_LSCLK,
	68	PA6_PF_LD0,
	69	PA7_PF_LD1,
	70	PA8_PF_LD2,
	71	PA9_PF_LD3,
	72	PA10_PF_LD4,
	73	PA11_PF_LD5,
	74	PA12_PF_LD6,
	75	PA13_PF_LD7,
	76	PA14_PF_LD8,
	77	PA15_PF_LD9,
	78	PA16_PF_LD10,
	79	PA17_PF_LD11,
	80	PA18_PF_LD12,
	81	PA19_PF_LD13,
	82	PA20_PF_LD14,
	83	PA21_PF_LD15,
	84	PA22_PF_LD16,
	85	PA23_PF_LD17,
	86	PA28_PF_HSYNC,
	87	PA29_PF_VSYNC,
	88	PA30_PF_CONTRAST,
	89	PA31_PF_OE_ACD,
	90	/* SPI1 */
a961bf38 EB	91	PD29_PF_CSPI1_SCLK,
	92	PD30_PF_CSPI1_MISO,
	93	PD31_PF_CSPI1_MOSI,
d2195d52	94	/* SSI4 */
e8c74860 EB	95	#if defined(CONFIG_SND_SOC_EUKREA_TLV320) \
e8c74860 EB	96	\|\| defined(CONFIG_SND_SOC_EUKREA_TLV320_MODULE)
d2195d52 EB	97	PC16_PF_SSI4_FS,
	98	PC17_PF_SSI4_RXD \| GPIO_PUEN,
	99	PC18_PF_SSI4_TXD \| GPIO_PUEN,
	100	PC19_PF_SSI4_CLK,
	101	#endif
a961bf38 EB	102	};
a961bf38 EB	103
5203b99c EB	104	static const uint32_t eukrea_mbimx27_keymap[] = {
	105	KEY(0, 0, KEY_UP),
	106	KEY(0, 1, KEY_DOWN),
	107	KEY(1, 0, KEY_RIGHT),
	108	KEY(1, 1, KEY_LEFT),
	109	};
	110
3f880141 UKK	111	static const struct matrix_keymap_data
3f880141 UKK	112	eukrea_mbimx27_keymap_data __initconst = {
5203b99c EB	113	.keymap = eukrea_mbimx27_keymap,
	114	.keymap_size = ARRAY_SIZE(eukrea_mbimx27_keymap),
	115	};
	116
a961bf38 EB	117	static struct gpio_led gpio_leds[] = {
	118	{
	119	.name = "led1",
	120	.default_trigger = "heartbeat",
	121	.active_low = 1,
	122	.gpio = GPIO_PORTF \| 16,
	123	},
	124	{
	125	.name = "led2",
	126	.default_trigger = "none",
	127	.active_low = 1,
	128	.gpio = GPIO_PORTF \| 19,
	129	},
a961bf38 EB	130	};
	131
	132	static struct gpio_led_platform_data gpio_led_info = {
	133	.leds = gpio_leds,
	134	.num_leds = ARRAY_SIZE(gpio_leds),
	135	};
	136
	137	static struct platform_device leds_gpio = {
	138	.name = "leds-gpio",
	139	.id = -1,
	140	.dev = {
	141	.platform_data = &gpio_led_info,
	142	},
	143	};
	144
	145	static struct imx_fb_videomode eukrea_mbimx27_modes[] = {
	146	{
	147	.mode = {
4eaad66a	148	.name = "CMO-QVGA",
a961bf38 EB	149	.refresh = 60,
	150	.xres = 320,
	151	.yres = 240,
	152	.pixclock = 156000,
	153	.hsync_len = 30,
	154	.left_margin = 38,
	155	.right_margin = 20,
	156	.vsync_len = 3,
	157	.upper_margin = 15,
	158	.lower_margin = 4,
	159	},
	160	.pcr = 0xFAD08B80,
a465242e EB	161	.bpp = 16,
	162	}, {
	163	.mode = {
	164	.name = "DVI-VGA",
	165	.refresh = 60,
	166	.xres = 640,
	167	.yres = 480,
	168	.pixclock = 32000,
	169	.hsync_len = 1,
	170	.left_margin = 35,
	171	.right_margin = 0,
	172	.vsync_len = 1,
	173	.upper_margin = 7,
	174	.lower_margin = 0,
	175	},
	176	.pcr = 0xFA208B80,
	177	.bpp = 16,
	178	}, {
	179	.mode = {
	180	.name = "DVI-SVGA",
	181	.refresh = 60,
	182	.xres = 800,
	183	.yres = 600,
	184	.pixclock = 25000,
	185	.hsync_len = 1,
	186	.left_margin = 35,
	187	.right_margin = 0,
	188	.vsync_len = 1,
	189	.upper_margin = 7,
	190	.lower_margin = 0,
	191	},
	192	.pcr = 0xFA208B80,
a961bf38 EB	193	.bpp = 16,
	194	},
	195	};
	196
ad851bff	197	static const struct imx_fb_platform_data eukrea_mbimx27_fb_data __initconst = {
a961bf38 EB	198	.mode = eukrea_mbimx27_modes,
	199	.num_modes = ARRAY_SIZE(eukrea_mbimx27_modes),
	200
	201	.pwmr = 0x00A903FF,
	202	.lscr1 = 0x00120300,
	203	.dmacr = 0x00040060,
	204	};
	205
fc04ad0e EB	206	static void eukrea_mbimx27_bl_set_intensity(int intensity)
	207	{
	208	if (intensity)
	209	gpio_direction_output(GPIO_PORTE \| 5, 1);
	210	else
	211	gpio_direction_output(GPIO_PORTE \| 5, 0);
	212	}
	213
	214	static struct generic_bl_info eukrea_mbimx27_bl_info = {
	215	.name = "eukrea_mbimx27-bl",
	216	.max_intensity = 0xff,
	217	.default_intensity = 0xff,
	218	.set_bl_intensity = eukrea_mbimx27_bl_set_intensity,
	219	};
	220
	221	static struct platform_device eukrea_mbimx27_bl_dev = {
	222	.name = "generic-bl",
	223	.id = 1,
	224	.dev = {
	225	.platform_data = &eukrea_mbimx27_bl_info,
	226	},
	227	};
	228
	229	static void eukrea_mbimx27_lcd_power_set(struct plat_lcd_data *pd,
	230	unsigned int power)
	231	{
	232	if (power)
	233	gpio_direction_output(GPIO_PORTA \| 25, 1);
	234	else
	235	gpio_direction_output(GPIO_PORTA \| 25, 0);
	236	}
	237
	238	static struct plat_lcd_data eukrea_mbimx27_lcd_power_data = {
	239	.set_power = eukrea_mbimx27_lcd_power_set,
	240	};
	241
	242	static struct platform_device eukrea_mbimx27_lcd_powerdev = {
	243	.name = "platform-lcd",
	244	.dev.platform_data = &eukrea_mbimx27_lcd_power_data,
	245	};
	246
d5dac4a6 UKK	247	static const struct imxuart_platform_data uart_pdata __initconst = {
d5dac4a6 UKK	248	.flags = IMXUART_HAVE_RTSCTS,
a961bf38 EB	249	};
a961bf38 EB	250
62d725b1	251	#if defined(CONFIG_TOUCHSCREEN_ADS7846) \
a961bf38 EB	252	\|\| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
	253
	254	#define ADS7846_PENDOWN (GPIO_PORTD \| 25)
	255
	256	static void ads7846_dev_init(void)
	257	{
	258	if (gpio_request(ADS7846_PENDOWN, "ADS7846 pendown") < 0) {
	259	printk(KERN_ERR "can't get ads746 pen down GPIO\n");
	260	return;
	261	}
a961bf38 EB	262	gpio_direction_input(ADS7846_PENDOWN);
	263	}
	264
	265	static int ads7846_get_pendown_state(void)
	266	{
	267	return !gpio_get_value(ADS7846_PENDOWN);
	268	}
	269
	270	static struct ads7846_platform_data ads7846_config __initdata = {
	271	.get_pendown_state = ads7846_get_pendown_state,
	272	.keep_vref_on = 1,
	273	};
62d725b1	274	#endif
a961bf38	275
62d725b1	276	#if defined(CONFIG_SPI_IMX) \|\| defined(CONFIG_SPI_IMX_MODULE)
a961bf38 EB	277	static struct spi_board_info eukrea_mbimx27_spi_board_info[] __initdata = {
	278	[0] = {
	279	.modalias = "ads7846",
	280	.bus_num = 0,
	281	.chip_select = 0,
	282	.max_speed_hz = 1500000,
	283	.irq = IRQ_GPIOD(25),
	284	.platform_data = &ads7846_config,
	285	.mode = SPI_MODE_2,
	286	},
	287	};
	288
	289	static int eukrea_mbimx27_spi_cs[] = {GPIO_PORTD \| 28};
	290
7536cf99	291	static const struct spi_imx_master eukrea_mbimx27_spi0_data __initconst = {
a961bf38 EB	292	.chipselect = eukrea_mbimx27_spi_cs,
	293	.num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs),
	294	};
	295	#endif
	296
5055d1ef EB	297	static struct i2c_board_info eukrea_mbimx27_i2c_devices[] = {
	298	{
	299	I2C_BOARD_INFO("tlv320aic23", 0x1a),
	300	},
	301	};
	302
a961bf38 EB	303	static struct platform_device *platform_devices[] __initdata = {
	304	&leds_gpio,
	305	};
	306
9d3d945a	307	static const struct imxmmc_platform_data sdhc_pdata __initconst = {
e76a17c2 EB	308	.dat3_card_detect = 1,
	309	};
	310
4697bb92 UKK	311	static const
4697bb92 UKK	312	struct imx_ssi_platform_data eukrea_mbimx27_ssi_pdata __initconst = {
d2195d52 EB	313	.flags = IMX_SSI_DMA \| IMX_SSI_USE_I2S_SLAVE,
	314	};
	315
a961bf38 EB	316	/*
	317	* system init for baseboard usage. Will be called by cpuimx27 init.
	318	*
	319	* Add platform devices present on this baseboard and init
	320	* them from CPU side as far as required to use them later on
	321	*/
	322	void __init eukrea_mbimx27_baseboard_init(void)
	323	{
	324	mxc_gpio_setup_multiple_pins(eukrea_mbimx27_pins,
	325	ARRAY_SIZE(eukrea_mbimx27_pins), "MBIMX27");
	326
e8c74860 EB	327	#if defined(CONFIG_SND_SOC_EUKREA_TLV320) \
e8c74860 EB	328	\|\| defined(CONFIG_SND_SOC_EUKREA_TLV320_MODULE)
d2195d52 EB	329	/* SSI unit master I2S codec connected to SSI_PINS_4*/
	330	mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0,
	331	MXC_AUDMUX_V1_PCR_SYN \|
	332	MXC_AUDMUX_V1_PCR_TFSDIR \|
	333	MXC_AUDMUX_V1_PCR_TCLKDIR \|
	334	MXC_AUDMUX_V1_PCR_RFSDIR \|
	335	MXC_AUDMUX_V1_PCR_RCLKDIR \|
	336	MXC_AUDMUX_V1_PCR_TFCSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4) \|
	337	MXC_AUDMUX_V1_PCR_RFCSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4) \|
	338	MXC_AUDMUX_V1_PCR_RXDSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4)
	339	);
	340	mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR3_SSI_PINS_4,
	341	MXC_AUDMUX_V1_PCR_SYN \|
	342	MXC_AUDMUX_V1_PCR_RXDSEL(MX27_AUDMUX_HPCR1_SSI0)
	343	);
	344	#endif
	345
d5dac4a6 UKK	346	imx27_add_imx_uart1(&uart_pdata);
d5dac4a6 UKK	347	imx27_add_imx_uart2(&uart_pdata);
2d66c780	348	#if !defined(MACH_EUKREA_CPUIMX27_USEUART4)
2dcf78c0	349	imx27_add_imx_uart3(&uart_pdata);
2d66c780	350	#endif
a961bf38	351
ad851bff	352	imx27_add_imx_fb(&eukrea_mbimx27_fb_data);
9d3d945a	353	imx27_add_mxc_mmc(0, &sdhc_pdata);
a961bf38	354
d2195d52 EB	355	i2c_register_board_info(0, eukrea_mbimx27_i2c_devices,
	356	ARRAY_SIZE(eukrea_mbimx27_i2c_devices));
	357
4697bb92	358	imx27_add_imx_ssi(0, &eukrea_mbimx27_ssi_pdata);
d2195d52	359
62d725b1	360	#if defined(CONFIG_TOUCHSCREEN_ADS7846) \
a961bf38	361	\|\| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
62d725b1	362	/* ADS7846 Touchscreen controller init */
a961bf38	363	mxc_gpio_mode(GPIO_PORTD \| 25 \| GPIO_GPIO \| GPIO_IN);
62d725b1 EB	364	ads7846_dev_init();
	365	#endif
	366
	367	#if defined(CONFIG_SPI_IMX) \|\| defined(CONFIG_SPI_IMX_MODULE)
	368	/* SPI_CS0 init */
	369	mxc_gpio_mode(GPIO_PORTD \| 28 \| GPIO_GPIO \| GPIO_OUT);
7536cf99	370	imx27_add_spi_imx0(&eukrea_mbimx27_spi0_data);
a961bf38 EB	371	spi_register_board_info(eukrea_mbimx27_spi_board_info,
a961bf38 EB	372	ARRAY_SIZE(eukrea_mbimx27_spi_board_info));
a961bf38 EB	373	#endif
	374
	375	/* Leds configuration */
	376	mxc_gpio_mode(GPIO_PORTF \| 16 \| GPIO_GPIO \| GPIO_OUT);
	377	mxc_gpio_mode(GPIO_PORTF \| 19 \| GPIO_GPIO \| GPIO_OUT);
	378	/* Backlight */
	379	mxc_gpio_mode(GPIO_PORTE \| 5 \| GPIO_GPIO \| GPIO_OUT);
fc04ad0e EB	380	gpio_request(GPIO_PORTE \| 5, "backlight");
	381	platform_device_register(&eukrea_mbimx27_bl_dev);
	382	/* LCD Reset */
	383	mxc_gpio_mode(GPIO_PORTA \| 25 \| GPIO_GPIO \| GPIO_OUT);
	384	gpio_request(GPIO_PORTA \| 25, "lcd_enable");
	385	platform_device_register(&eukrea_mbimx27_lcd_powerdev);
a961bf38	386
3f880141	387	imx27_add_imx_keypad(&eukrea_mbimx27_keymap_data);
5203b99c	388
a961bf38 EB	389	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
a961bf38 EB	390	}