[deliverable/linux.git] / arch / arm / mach-imx / eukrea_mbimx27-baseboard.c

/*
 * Copyright (C) 2009-2010 Eric Benard - eric@eukrea.com
 *
 * Based on pcm970-baseboard.c which is :
 * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
 * MA 02110-1301, USA.
 */

#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/backlight.h>
#include <video/platform_lcd.h>

#include <asm/mach/arch.h>

#include "common.h"
#include "devices-imx27.h"
#include "hardware.h"
#include "iomux-mx27.h"

static const int eukrea_mbimx27_pins[] __initconst = {
	/* UART2 */
	PE3_PF_UART2_CTS,
	PE4_PF_UART2_RTS,
	PE6_PF_UART2_TXD,
	PE7_PF_UART2_RXD,
	/* UART3 */
	PE8_PF_UART3_TXD,
	PE9_PF_UART3_RXD,
	PE10_PF_UART3_CTS,
	PE11_PF_UART3_RTS,
	/* UART4 */
#if !defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4)
	PB26_AF_UART4_RTS,
	PB28_AF_UART4_TXD,
	PB29_AF_UART4_CTS,
	PB31_AF_UART4_RXD,
#endif
	/* SDHC1*/
	PE18_PF_SD1_D0,
	PE19_PF_SD1_D1,
	PE20_PF_SD1_D2,
	PE21_PF_SD1_D3,
	PE22_PF_SD1_CMD,
	PE23_PF_SD1_CLK,
	/* display */
	PA5_PF_LSCLK,
	PA6_PF_LD0,
	PA7_PF_LD1,
	PA8_PF_LD2,
	PA9_PF_LD3,
	PA10_PF_LD4,
	PA11_PF_LD5,
	PA12_PF_LD6,
	PA13_PF_LD7,
	PA14_PF_LD8,
	PA15_PF_LD9,
	PA16_PF_LD10,
	PA17_PF_LD11,
	PA18_PF_LD12,
	PA19_PF_LD13,
	PA20_PF_LD14,
	PA21_PF_LD15,
	PA22_PF_LD16,
	PA23_PF_LD17,
	PA28_PF_HSYNC,
	PA29_PF_VSYNC,
	PA30_PF_CONTRAST,
	PA31_PF_OE_ACD,
	/* SPI1 */
	PD29_PF_CSPI1_SCLK,
	PD30_PF_CSPI1_MISO,
	PD31_PF_CSPI1_MOSI,
	/* SSI4 */
#if defined(CONFIG_SND_SOC_EUKREA_TLV320) \
	|| defined(CONFIG_SND_SOC_EUKREA_TLV320_MODULE)
	PC16_PF_SSI4_FS,
	PC17_PF_SSI4_RXD | GPIO_PUEN,
	PC18_PF_SSI4_TXD | GPIO_PUEN,
	PC19_PF_SSI4_CLK,
#endif
};

static const uint32_t eukrea_mbimx27_keymap[] = {
	KEY(0, 0, KEY_UP),
	KEY(0, 1, KEY_DOWN),
	KEY(1, 0, KEY_RIGHT),
	KEY(1, 1, KEY_LEFT),
};

static const struct matrix_keymap_data
eukrea_mbimx27_keymap_data __initconst = {
	.keymap         = eukrea_mbimx27_keymap,
	.keymap_size    = ARRAY_SIZE(eukrea_mbimx27_keymap),
};

static const struct gpio_led eukrea_mbimx27_gpio_leds[] __initconst = {
	{
		.name			= "led1",
		.default_trigger	= "heartbeat",
		.active_low		= 1,
		.gpio			= GPIO_PORTF | 16,
	},
	{
		.name			= "led2",
		.default_trigger	= "none",
		.active_low		= 1,
		.gpio			= GPIO_PORTF | 19,
	},
};

static const struct gpio_led_platform_data
		eukrea_mbimx27_gpio_led_info __initconst = {
	.leds		= eukrea_mbimx27_gpio_leds,
	.num_leds	= ARRAY_SIZE(eukrea_mbimx27_gpio_leds),
};

static struct imx_fb_videomode eukrea_mbimx27_modes[] = {
	{
		.mode = {
			.name		= "CMO-QVGA",
			.refresh	= 60,
			.xres		= 320,
			.yres		= 240,
			.pixclock	= 156000,
			.hsync_len	= 30,
			.left_margin	= 38,
			.right_margin	= 20,
			.vsync_len	= 3,
			.upper_margin	= 15,
			.lower_margin	= 4,
		},
		.pcr		= 0xFAD08B80,
		.bpp		= 16,
	}, {
		.mode = {
			.name		= "DVI-VGA",
			.refresh	= 60,
			.xres		= 640,
			.yres		= 480,
			.pixclock	= 32000,
			.hsync_len	= 1,
			.left_margin	= 35,
			.right_margin	= 0,
			.vsync_len	= 1,
			.upper_margin	= 7,
			.lower_margin	= 0,
		},
		.pcr		= 0xFA208B80,
		.bpp		= 16,
	}, {
		.mode = {
			.name		= "DVI-SVGA",
			.refresh	= 60,
			.xres		= 800,
			.yres		= 600,
			.pixclock	= 25000,
			.hsync_len	= 1,
			.left_margin	= 35,
			.right_margin	= 0,
			.vsync_len	= 1,
			.upper_margin	= 7,
			.lower_margin	= 0,
		},
		.pcr		= 0xFA208B80,
		.bpp		= 16,
	},
};

static const struct imx_fb_platform_data eukrea_mbimx27_fb_data __initconst = {
	.mode = eukrea_mbimx27_modes,
	.num_modes = ARRAY_SIZE(eukrea_mbimx27_modes),

	.pwmr		= 0x00A903FF,
	.lscr1		= 0x00120300,
	.dmacr		= 0x00040060,
};

static void eukrea_mbimx27_bl_set_intensity(int intensity)
{
	if (intensity)
		gpio_direction_output(GPIO_PORTE | 5, 1);
	else
		gpio_direction_output(GPIO_PORTE | 5, 0);
}

static struct generic_bl_info eukrea_mbimx27_bl_info = {
	.name			= "eukrea_mbimx27-bl",
	.max_intensity		= 0xff,
	.default_intensity	= 0xff,
	.set_bl_intensity	= eukrea_mbimx27_bl_set_intensity,
};

static struct platform_device eukrea_mbimx27_bl_dev = {
	.name			= "generic-bl",
	.id			= 1,
	.dev = {
		.platform_data	= &eukrea_mbimx27_bl_info,
	},
};

static void eukrea_mbimx27_lcd_power_set(struct plat_lcd_data *pd,
				   unsigned int power)
{
	if (power)
		gpio_direction_output(GPIO_PORTA | 25, 1);
	else
		gpio_direction_output(GPIO_PORTA | 25, 0);
}

static struct plat_lcd_data eukrea_mbimx27_lcd_power_data = {
	.set_power		= eukrea_mbimx27_lcd_power_set,
};

static struct platform_device eukrea_mbimx27_lcd_powerdev = {
	.name			= "platform-lcd",
	.dev.platform_data	= &eukrea_mbimx27_lcd_power_data,
};

static const struct imxuart_platform_data uart_pdata __initconst = {
	.flags = IMXUART_HAVE_RTSCTS,
};

#define ADS7846_PENDOWN (GPIO_PORTD | 25)

static void __maybe_unused ads7846_dev_init(void)
{
	if (gpio_request(ADS7846_PENDOWN, "ADS7846 pendown") < 0) {
		printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
		return;
	}
	gpio_direction_input(ADS7846_PENDOWN);
}

static int ads7846_get_pendown_state(void)
{
	return !gpio_get_value(ADS7846_PENDOWN);
}

static struct ads7846_platform_data ads7846_config __initdata = {
	.get_pendown_state	= ads7846_get_pendown_state,
	.keep_vref_on		= 1,
};

static struct spi_board_info __maybe_unused
		eukrea_mbimx27_spi_board_info[] __initdata = {
	[0] = {
		.modalias	= "ads7846",
		.bus_num	= 0,
		.chip_select	= 0,
		.max_speed_hz	= 1500000,
		/* irq number is run-time assigned */
		.platform_data	= &ads7846_config,
		.mode           = SPI_MODE_2,
	},
};

static int eukrea_mbimx27_spi_cs[] = {GPIO_PORTD | 28};

static const struct spi_imx_master eukrea_mbimx27_spi0_data __initconst = {
	.chipselect	= eukrea_mbimx27_spi_cs,
	.num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs),
};

static struct i2c_board_info eukrea_mbimx27_i2c_devices[] = {
	{
		I2C_BOARD_INFO("tlv320aic23", 0x1a),
	},
};

static const struct imxmmc_platform_data sdhc_pdata __initconst = {
	.dat3_card_detect = 1,
};

static const
struct imx_ssi_platform_data eukrea_mbimx27_ssi_pdata __initconst = {
	.flags = IMX_SSI_DMA | IMX_SSI_USE_I2S_SLAVE,
};

/*
 * system init for baseboard usage. Will be called by cpuimx27 init.
 *
 * Add platform devices present on this baseboard and init
 * them from CPU side as far as required to use them later on
 */
void __init eukrea_mbimx27_baseboard_init(void)
{
	mxc_gpio_setup_multiple_pins(eukrea_mbimx27_pins,
		ARRAY_SIZE(eukrea_mbimx27_pins), "MBIMX27");

	imx27_add_imx_uart1(&uart_pdata);
	imx27_add_imx_uart2(&uart_pdata);
#if !defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4)
	imx27_add_imx_uart3(&uart_pdata);
#endif

	imx27_add_imx_fb(&eukrea_mbimx27_fb_data);
	imx27_add_mxc_mmc(0, &sdhc_pdata);

	i2c_register_board_info(0, eukrea_mbimx27_i2c_devices,
				ARRAY_SIZE(eukrea_mbimx27_i2c_devices));

	imx27_add_imx_ssi(0, &eukrea_mbimx27_ssi_pdata);

#if defined(CONFIG_TOUCHSCREEN_ADS7846) \
	|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
	/* ADS7846 Touchscreen controller init */
	mxc_gpio_mode(GPIO_PORTD | 25 | GPIO_GPIO | GPIO_IN);
	ads7846_dev_init();
#endif

	/* SPI_CS0 init */
	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
	imx27_add_spi_imx0(&eukrea_mbimx27_spi0_data);
	eukrea_mbimx27_spi_board_info[0].irq = gpio_to_irq(IMX_GPIO_NR(4, 25));
	spi_register_board_info(eukrea_mbimx27_spi_board_info,
			ARRAY_SIZE(eukrea_mbimx27_spi_board_info));

	/* Leds configuration */
	mxc_gpio_mode(GPIO_PORTF | 16 | GPIO_GPIO | GPIO_OUT);
	mxc_gpio_mode(GPIO_PORTF | 19 | GPIO_GPIO | GPIO_OUT);
	/* Backlight */
	mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_OUT);
	gpio_request(GPIO_PORTE | 5, "backlight");
	platform_device_register(&eukrea_mbimx27_bl_dev);
	/* LCD Reset */
	mxc_gpio_mode(GPIO_PORTA | 25 | GPIO_GPIO | GPIO_OUT);
	gpio_request(GPIO_PORTA | 25, "lcd_enable");
	platform_device_register(&eukrea_mbimx27_lcd_powerdev);

	imx27_add_imx_keypad(&eukrea_mbimx27_keymap_data);

	gpio_led_register_device(-1, &eukrea_mbimx27_gpio_led_info);
	imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0);
}
Commit	Line	Data
a961bf38	1	/*
d2195d52	2	* Copyright (C) 2009-2010 Eric Benard - eric@eukrea.com
a961bf38 EB	3	*
	4	* Based on pcm970-baseboard.c which is :
	5	* Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
	6	*
	7	* This program is free software; you can redistribute it and/or
	8	* modify it under the terms of the GNU General Public License
	9	* as published by the Free Software Foundation; either version 2
	10	* of the License, or (at your option) any later version.
	11	* This program is distributed in the hope that it will be useful,
	12	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	13	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	14	* GNU General Public License for more details.
	15	*
	16	* You should have received a copy of the GNU General Public License
	17	* along with this program; if not, write to the Free Software
	18	* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
	19	* MA 02110-1301, USA.
	20	*/
	21
	22	#include <linux/gpio.h>
	23	#include <linux/irq.h>
	24	#include <linux/platform_device.h>
	25	#include <linux/spi/spi.h>
	26	#include <linux/spi/ads7846.h>
fc04ad0e EB	27	#include <linux/backlight.h>
fc04ad0e EB	28	#include <video/platform_lcd.h>
a961bf38 EB	29
	30	#include <asm/mach/arch.h>
	31
e3372474	32	#include "common.h"
7536cf99	33	#include "devices-imx27.h"
50f2de61	34	#include "hardware.h"
267dd34c	35	#include "iomux-mx27.h"
a961bf38	36
6c80ee51	37	static const int eukrea_mbimx27_pins[] __initconst = {
a961bf38 EB	38	/* UART2 */
	39	PE3_PF_UART2_CTS,
	40	PE4_PF_UART2_RTS,
	41	PE6_PF_UART2_TXD,
	42	PE7_PF_UART2_RXD,
	43	/* UART3 */
	44	PE8_PF_UART3_TXD,
	45	PE9_PF_UART3_RXD,
	46	PE10_PF_UART3_CTS,
	47	PE11_PF_UART3_RTS,
	48	/* UART4 */
4f5ef62c	49	#if !defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4)
a961bf38 EB	50	PB26_AF_UART4_RTS,
	51	PB28_AF_UART4_TXD,
	52	PB29_AF_UART4_CTS,
	53	PB31_AF_UART4_RXD,
2d66c780	54	#endif
a961bf38 EB	55	/* SDHC1*/
	56	PE18_PF_SD1_D0,
	57	PE19_PF_SD1_D1,
	58	PE20_PF_SD1_D2,
	59	PE21_PF_SD1_D3,
	60	PE22_PF_SD1_CMD,
	61	PE23_PF_SD1_CLK,
	62	/* display */
	63	PA5_PF_LSCLK,
	64	PA6_PF_LD0,
	65	PA7_PF_LD1,
	66	PA8_PF_LD2,
	67	PA9_PF_LD3,
	68	PA10_PF_LD4,
	69	PA11_PF_LD5,
	70	PA12_PF_LD6,
	71	PA13_PF_LD7,
	72	PA14_PF_LD8,
	73	PA15_PF_LD9,
	74	PA16_PF_LD10,
	75	PA17_PF_LD11,
	76	PA18_PF_LD12,
	77	PA19_PF_LD13,
	78	PA20_PF_LD14,
	79	PA21_PF_LD15,
	80	PA22_PF_LD16,
	81	PA23_PF_LD17,
	82	PA28_PF_HSYNC,
	83	PA29_PF_VSYNC,
	84	PA30_PF_CONTRAST,
	85	PA31_PF_OE_ACD,
	86	/* SPI1 */
a961bf38 EB	87	PD29_PF_CSPI1_SCLK,
	88	PD30_PF_CSPI1_MISO,
	89	PD31_PF_CSPI1_MOSI,
d2195d52	90	/* SSI4 */
e8c74860 EB	91	#if defined(CONFIG_SND_SOC_EUKREA_TLV320) \
e8c74860 EB	92	\|\| defined(CONFIG_SND_SOC_EUKREA_TLV320_MODULE)
d2195d52 EB	93	PC16_PF_SSI4_FS,
	94	PC17_PF_SSI4_RXD \| GPIO_PUEN,
	95	PC18_PF_SSI4_TXD \| GPIO_PUEN,
	96	PC19_PF_SSI4_CLK,
	97	#endif
a961bf38 EB	98	};
a961bf38 EB	99
5203b99c EB	100	static const uint32_t eukrea_mbimx27_keymap[] = {
	101	KEY(0, 0, KEY_UP),
	102	KEY(0, 1, KEY_DOWN),
	103	KEY(1, 0, KEY_RIGHT),
	104	KEY(1, 1, KEY_LEFT),
	105	};
	106
3f880141 UKK	107	static const struct matrix_keymap_data
3f880141 UKK	108	eukrea_mbimx27_keymap_data __initconst = {
5203b99c EB	109	.keymap = eukrea_mbimx27_keymap,
	110	.keymap_size = ARRAY_SIZE(eukrea_mbimx27_keymap),
	111	};
	112
47e837b5	113	static const struct gpio_led eukrea_mbimx27_gpio_leds[] __initconst = {
a961bf38 EB	114	{
	115	.name = "led1",
	116	.default_trigger = "heartbeat",
	117	.active_low = 1,
	118	.gpio = GPIO_PORTF \| 16,
	119	},
	120	{
	121	.name = "led2",
	122	.default_trigger = "none",
	123	.active_low = 1,
	124	.gpio = GPIO_PORTF \| 19,
	125	},
a961bf38 EB	126	};
a961bf38 EB	127
47e837b5 UKK	128	static const struct gpio_led_platform_data
	129	eukrea_mbimx27_gpio_led_info __initconst = {
	130	.leds = eukrea_mbimx27_gpio_leds,
	131	.num_leds = ARRAY_SIZE(eukrea_mbimx27_gpio_leds),
a961bf38 EB	132	};
	133
	134	static struct imx_fb_videomode eukrea_mbimx27_modes[] = {
	135	{
	136	.mode = {
4eaad66a	137	.name = "CMO-QVGA",
a961bf38 EB	138	.refresh = 60,
	139	.xres = 320,
	140	.yres = 240,
	141	.pixclock = 156000,
	142	.hsync_len = 30,
	143	.left_margin = 38,
	144	.right_margin = 20,
	145	.vsync_len = 3,
	146	.upper_margin = 15,
	147	.lower_margin = 4,
	148	},
	149	.pcr = 0xFAD08B80,
a465242e EB	150	.bpp = 16,
	151	}, {
	152	.mode = {
	153	.name = "DVI-VGA",
	154	.refresh = 60,
	155	.xres = 640,
	156	.yres = 480,
	157	.pixclock = 32000,
	158	.hsync_len = 1,
	159	.left_margin = 35,
	160	.right_margin = 0,
	161	.vsync_len = 1,
	162	.upper_margin = 7,
	163	.lower_margin = 0,
	164	},
	165	.pcr = 0xFA208B80,
	166	.bpp = 16,
	167	}, {
	168	.mode = {
	169	.name = "DVI-SVGA",
	170	.refresh = 60,
	171	.xres = 800,
	172	.yres = 600,
	173	.pixclock = 25000,
	174	.hsync_len = 1,
	175	.left_margin = 35,
	176	.right_margin = 0,
	177	.vsync_len = 1,
	178	.upper_margin = 7,
	179	.lower_margin = 0,
	180	},
	181	.pcr = 0xFA208B80,
a961bf38 EB	182	.bpp = 16,
	183	},
	184	};
	185
ad851bff	186	static const struct imx_fb_platform_data eukrea_mbimx27_fb_data __initconst = {
a961bf38 EB	187	.mode = eukrea_mbimx27_modes,
	188	.num_modes = ARRAY_SIZE(eukrea_mbimx27_modes),
	189
	190	.pwmr = 0x00A903FF,
	191	.lscr1 = 0x00120300,
	192	.dmacr = 0x00040060,
	193	};
	194
fc04ad0e EB	195	static void eukrea_mbimx27_bl_set_intensity(int intensity)
	196	{
	197	if (intensity)
	198	gpio_direction_output(GPIO_PORTE \| 5, 1);
	199	else
	200	gpio_direction_output(GPIO_PORTE \| 5, 0);
	201	}
	202
	203	static struct generic_bl_info eukrea_mbimx27_bl_info = {
	204	.name = "eukrea_mbimx27-bl",
	205	.max_intensity = 0xff,
	206	.default_intensity = 0xff,
	207	.set_bl_intensity = eukrea_mbimx27_bl_set_intensity,
	208	};
	209
	210	static struct platform_device eukrea_mbimx27_bl_dev = {
	211	.name = "generic-bl",
	212	.id = 1,
	213	.dev = {
	214	.platform_data = &eukrea_mbimx27_bl_info,
	215	},
	216	};
	217
	218	static void eukrea_mbimx27_lcd_power_set(struct plat_lcd_data *pd,
	219	unsigned int power)
	220	{
	221	if (power)
	222	gpio_direction_output(GPIO_PORTA \| 25, 1);
	223	else
	224	gpio_direction_output(GPIO_PORTA \| 25, 0);
	225	}
	226
	227	static struct plat_lcd_data eukrea_mbimx27_lcd_power_data = {
	228	.set_power = eukrea_mbimx27_lcd_power_set,
	229	};
	230
	231	static struct platform_device eukrea_mbimx27_lcd_powerdev = {
	232	.name = "platform-lcd",
	233	.dev.platform_data = &eukrea_mbimx27_lcd_power_data,
	234	};
	235
d5dac4a6 UKK	236	static const struct imxuart_platform_data uart_pdata __initconst = {
d5dac4a6 UKK	237	.flags = IMXUART_HAVE_RTSCTS,
a961bf38 EB	238	};
a961bf38 EB	239
a961bf38 EB	240	#define ADS7846_PENDOWN (GPIO_PORTD \| 25)
a961bf38 EB	241
9b1e1ea3	242	static void __maybe_unused ads7846_dev_init(void)
a961bf38 EB	243	{
a961bf38 EB	244	if (gpio_request(ADS7846_PENDOWN, "ADS7846 pendown") < 0) {
07f0450e	245	printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
a961bf38 EB	246	return;
a961bf38 EB	247	}
a961bf38 EB	248	gpio_direction_input(ADS7846_PENDOWN);
	249	}
	250
	251	static int ads7846_get_pendown_state(void)
	252	{
	253	return !gpio_get_value(ADS7846_PENDOWN);
	254	}
	255
	256	static struct ads7846_platform_data ads7846_config __initdata = {
	257	.get_pendown_state = ads7846_get_pendown_state,
	258	.keep_vref_on = 1,
	259	};
	260
9b1e1ea3 UKK	261	static struct spi_board_info __maybe_unused
9b1e1ea3 UKK	262	eukrea_mbimx27_spi_board_info[] __initdata = {
a961bf38 EB	263	[0] = {
	264	.modalias = "ads7846",
	265	.bus_num = 0,
	266	.chip_select = 0,
	267	.max_speed_hz = 1500000,
438196c3	268	/* irq number is run-time assigned */
a961bf38 EB	269	.platform_data = &ads7846_config,
	270	.mode = SPI_MODE_2,
	271	},
	272	};
	273
	274	static int eukrea_mbimx27_spi_cs[] = {GPIO_PORTD \| 28};
	275
7536cf99	276	static const struct spi_imx_master eukrea_mbimx27_spi0_data __initconst = {
a961bf38 EB	277	.chipselect = eukrea_mbimx27_spi_cs,
	278	.num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs),
	279	};
a961bf38	280
5055d1ef EB	281	static struct i2c_board_info eukrea_mbimx27_i2c_devices[] = {
	282	{
	283	I2C_BOARD_INFO("tlv320aic23", 0x1a),
	284	},
	285	};
	286
9d3d945a	287	static const struct imxmmc_platform_data sdhc_pdata __initconst = {
e76a17c2 EB	288	.dat3_card_detect = 1,
	289	};
	290
4697bb92 UKK	291	static const
4697bb92 UKK	292	struct imx_ssi_platform_data eukrea_mbimx27_ssi_pdata __initconst = {
d2195d52 EB	293	.flags = IMX_SSI_DMA \| IMX_SSI_USE_I2S_SLAVE,
	294	};
	295
a961bf38 EB	296	/*
	297	* system init for baseboard usage. Will be called by cpuimx27 init.
	298	*
	299	* Add platform devices present on this baseboard and init
	300	* them from CPU side as far as required to use them later on
	301	*/
	302	void __init eukrea_mbimx27_baseboard_init(void)
	303	{
	304	mxc_gpio_setup_multiple_pins(eukrea_mbimx27_pins,
	305	ARRAY_SIZE(eukrea_mbimx27_pins), "MBIMX27");
	306
d5dac4a6 UKK	307	imx27_add_imx_uart1(&uart_pdata);
d5dac4a6 UKK	308	imx27_add_imx_uart2(&uart_pdata);
4f5ef62c	309	#if !defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4)
2dcf78c0	310	imx27_add_imx_uart3(&uart_pdata);
2d66c780	311	#endif
a961bf38	312
ad851bff	313	imx27_add_imx_fb(&eukrea_mbimx27_fb_data);
9d3d945a	314	imx27_add_mxc_mmc(0, &sdhc_pdata);
a961bf38	315
d2195d52 EB	316	i2c_register_board_info(0, eukrea_mbimx27_i2c_devices,
	317	ARRAY_SIZE(eukrea_mbimx27_i2c_devices));
	318
4697bb92	319	imx27_add_imx_ssi(0, &eukrea_mbimx27_ssi_pdata);
d2195d52	320
62d725b1	321	#if defined(CONFIG_TOUCHSCREEN_ADS7846) \
a961bf38	322	\|\| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
62d725b1	323	/* ADS7846 Touchscreen controller init */
a961bf38	324	mxc_gpio_mode(GPIO_PORTD \| 25 \| GPIO_GPIO \| GPIO_IN);
62d725b1 EB	325	ads7846_dev_init();
	326	#endif
	327
62d725b1 EB	328	/* SPI_CS0 init */
62d725b1 EB	329	mxc_gpio_mode(GPIO_PORTD \| 28 \| GPIO_GPIO \| GPIO_OUT);
7536cf99	330	imx27_add_spi_imx0(&eukrea_mbimx27_spi0_data);
438196c3	331	eukrea_mbimx27_spi_board_info[0].irq = gpio_to_irq(IMX_GPIO_NR(4, 25));
a961bf38 EB	332	spi_register_board_info(eukrea_mbimx27_spi_board_info,
a961bf38 EB	333	ARRAY_SIZE(eukrea_mbimx27_spi_board_info));
a961bf38 EB	334
	335	/* Leds configuration */
	336	mxc_gpio_mode(GPIO_PORTF \| 16 \| GPIO_GPIO \| GPIO_OUT);
	337	mxc_gpio_mode(GPIO_PORTF \| 19 \| GPIO_GPIO \| GPIO_OUT);
	338	/* Backlight */
	339	mxc_gpio_mode(GPIO_PORTE \| 5 \| GPIO_GPIO \| GPIO_OUT);
fc04ad0e EB	340	gpio_request(GPIO_PORTE \| 5, "backlight");
	341	platform_device_register(&eukrea_mbimx27_bl_dev);
	342	/* LCD Reset */
	343	mxc_gpio_mode(GPIO_PORTA \| 25 \| GPIO_GPIO \| GPIO_OUT);
	344	gpio_request(GPIO_PORTA \| 25, "lcd_enable");
	345	platform_device_register(&eukrea_mbimx27_lcd_powerdev);
a961bf38	346
3f880141	347	imx27_add_imx_keypad(&eukrea_mbimx27_keymap_data);
5203b99c	348
47e837b5	349	gpio_led_register_device(-1, &eukrea_mbimx27_gpio_led_info);
da75c924	350	imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0);
a961bf38	351	}