[deliverable/linux.git] / arch / arm / mach-imx / mach-mx31moboard.c

/*
 *  Copyright (C) 2008 Valentin Longchamp, EPFL Mobots group
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/gfp.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/moduleparam.h>
#include <linux/leds.h>
#include <linux/memory.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/partitions.h>
#include <linux/platform_device.h>
#include <linux/regulator/machine.h>
#include <linux/mfd/mc13783.h>
#include <linux/spi/spi.h>
#include <linux/types.h>
#include <linux/memblock.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/err.h>
#include <linux/input.h>

#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>

#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
#include <asm/memblock.h>
#include <linux/platform_data/asoc-imx-ssi.h>

#include "board-mx31moboard.h"
#include "common.h"
#include "devices-imx31.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"

static unsigned int moboard_pins[] = {
	/* UART0 */
	MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1,
	MX31_PIN_CTS1__GPIO2_7,
	/* UART4 */
	MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5,
	MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5,
	/* I2C0 */
	MX31_PIN_I2C_DAT__I2C1_SDA, MX31_PIN_I2C_CLK__I2C1_SCL,
	/* I2C1 */
	MX31_PIN_DCD_DTE1__I2C2_SDA, MX31_PIN_RI_DTE1__I2C2_SCL,
	/* SDHC1 */
	MX31_PIN_SD1_DATA3__SD1_DATA3, MX31_PIN_SD1_DATA2__SD1_DATA2,
	MX31_PIN_SD1_DATA1__SD1_DATA1, MX31_PIN_SD1_DATA0__SD1_DATA0,
	MX31_PIN_SD1_CLK__SD1_CLK, MX31_PIN_SD1_CMD__SD1_CMD,
	MX31_PIN_ATA_CS0__GPIO3_26, MX31_PIN_ATA_CS1__GPIO3_27,
	/* USB reset */
	MX31_PIN_GPIO1_0__GPIO1_0,
	/* USB OTG */
	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
	MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
	MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
	MX31_PIN_USB_OC__GPIO1_30,
	/* USB H2 */
	MX31_PIN_USBH2_DATA0__USBH2_DATA0,
	MX31_PIN_USBH2_DATA1__USBH2_DATA1,
	MX31_PIN_STXD3__USBH2_DATA2, MX31_PIN_SRXD3__USBH2_DATA3,
	MX31_PIN_SCK3__USBH2_DATA4, MX31_PIN_SFS3__USBH2_DATA5,
	MX31_PIN_STXD6__USBH2_DATA6, MX31_PIN_SRXD6__USBH2_DATA7,
	MX31_PIN_USBH2_CLK__USBH2_CLK, MX31_PIN_USBH2_DIR__USBH2_DIR,
	MX31_PIN_USBH2_NXT__USBH2_NXT, MX31_PIN_USBH2_STP__USBH2_STP,
	MX31_PIN_SCK6__GPIO1_25,
	/* LEDs */
	MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1,
	MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3,
	/* SPI1 */
	MX31_PIN_CSPI2_MOSI__MOSI, MX31_PIN_CSPI2_MISO__MISO,
	MX31_PIN_CSPI2_SCLK__SCLK, MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
	MX31_PIN_CSPI2_SS0__SS0, MX31_PIN_CSPI2_SS2__SS2,
	/* Atlas IRQ */
	MX31_PIN_GPIO1_3__GPIO1_3,
	/* SPI2 */
	MX31_PIN_CSPI3_MOSI__MOSI, MX31_PIN_CSPI3_MISO__MISO,
	MX31_PIN_CSPI3_SCLK__SCLK, MX31_PIN_CSPI3_SPI_RDY__SPI_RDY,
	MX31_PIN_CSPI2_SS1__CSPI3_SS1,
	/* SSI */
	MX31_PIN_STXD4__STXD4, MX31_PIN_SRXD4__SRXD4,
	MX31_PIN_SCK4__SCK4, MX31_PIN_SFS4__SFS4,
};

static struct physmap_flash_data mx31moboard_flash_data = {
	.width	= 2,
};

static struct resource mx31moboard_flash_resource = {
	.start	= 0xa0000000,
	.end	= 0xa1ffffff,
	.flags	= IORESOURCE_MEM,
};

static struct platform_device mx31moboard_flash = {
	.name	= "physmap-flash",
	.id	= 0,
	.dev	= {
		.platform_data  = &mx31moboard_flash_data,
	},
	.resource = &mx31moboard_flash_resource,
	.num_resources = 1,
};

static int moboard_uart0_init(struct platform_device *pdev)
{
	int ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack");
	if (ret)
		return ret;

	ret = gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0);
	if (ret)
		gpio_free(IOMUX_TO_GPIO(MX31_PIN_CTS1));

	return ret;
}

static void moboard_uart0_exit(struct platform_device *pdev)
{
	gpio_free(IOMUX_TO_GPIO(MX31_PIN_CTS1));
}

static const struct imxuart_platform_data uart0_pdata __initconst = {
	.init = moboard_uart0_init,
	.exit = moboard_uart0_exit,
};

static const struct imxuart_platform_data uart4_pdata __initconst = {
	.flags = IMXUART_HAVE_RTSCTS,
};

static const struct imxi2c_platform_data moboard_i2c0_data __initconst = {
	.bitrate = 400000,
};

static const struct imxi2c_platform_data moboard_i2c1_data __initconst = {
	.bitrate = 100000,
};

static int moboard_spi1_cs[] = {
	MXC_SPI_CS(0),
	MXC_SPI_CS(2),
};

static const struct spi_imx_master moboard_spi1_pdata __initconst = {
	.chipselect	= moboard_spi1_cs,
	.num_chipselect	= ARRAY_SIZE(moboard_spi1_cs),
};

static struct regulator_consumer_supply sdhc_consumers[] = {
	{
		.dev_name = "imx31-mmc.0",
		.supply	= "sdhc0_vcc",
	},
	{
		.dev_name = "imx31-mmc.1",
		.supply	= "sdhc1_vcc",
	},
};

static struct regulator_init_data sdhc_vreg_data = {
	.constraints = {
		.min_uV = 2700000,
		.max_uV = 3000000,
		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
		.valid_modes_mask = REGULATOR_MODE_NORMAL |
			REGULATOR_MODE_FAST,
		.always_on = 0,
		.boot_on = 1,
	},
	.num_consumer_supplies = ARRAY_SIZE(sdhc_consumers),
	.consumer_supplies = sdhc_consumers,
};

static struct regulator_consumer_supply cam_consumers[] = {
	{
		.dev_name = "mx3_camera.0",
		.supply = "cam_vcc",
	},
};

static struct regulator_init_data cam_vreg_data = {
	.constraints = {
		.min_uV = 2700000,
		.max_uV = 3000000,
		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
		.valid_modes_mask = REGULATOR_MODE_NORMAL |
			REGULATOR_MODE_FAST,
		.always_on = 0,
		.boot_on = 1,
	},
	.num_consumer_supplies = ARRAY_SIZE(cam_consumers),
	.consumer_supplies = cam_consumers,
};

static struct mc13xxx_regulator_init_data moboard_regulators[] = {
	{
		.id = MC13783_REG_VMMC1,
		.init_data = &sdhc_vreg_data,
	},
	{
		.id = MC13783_REG_VCAM,
		.init_data = &cam_vreg_data,
	},
};

static struct mc13xxx_led_platform_data moboard_led[] = {
	{
		.id = MC13783_LED_R1,
		.name = "coreboard-led-4:red",
		.max_current = 2,
	},
	{
		.id = MC13783_LED_G1,
		.name = "coreboard-led-4:green",
		.max_current = 2,
	},
	{
		.id = MC13783_LED_B1,
		.name = "coreboard-led-4:blue",
		.max_current = 2,
	},
	{
		.id = MC13783_LED_R2,
		.name = "coreboard-led-5:red",
		.max_current = 3,
	},
	{
		.id = MC13783_LED_G2,
		.name = "coreboard-led-5:green",
		.max_current = 3,
	},
	{
		.id = MC13783_LED_B2,
		.name = "coreboard-led-5:blue",
		.max_current = 3,
	},
};

static struct mc13xxx_leds_platform_data moboard_leds = {
	.num_leds = ARRAY_SIZE(moboard_led),
	.led = moboard_led,
	.flags = MC13783_LED_SLEWLIMTC,
	.abmode = MC13783_LED_AB_DISABLED,
	.tc1_period = MC13783_LED_PERIOD_10MS,
	.tc2_period = MC13783_LED_PERIOD_10MS,
};

static struct mc13xxx_buttons_platform_data moboard_buttons = {
	.b1on_flags = MC13783_BUTTON_DBNC_750MS | MC13783_BUTTON_ENABLE |
			MC13783_BUTTON_POL_INVERT,
	.b1on_key = KEY_POWER,
};

static struct mc13xxx_codec_platform_data moboard_codec = {
	.dac_ssi_port = MC13783_SSI1_PORT,
	.adc_ssi_port = MC13783_SSI1_PORT,
};

static struct mc13xxx_platform_data moboard_pmic = {
	.regulators = {
		.regulators = moboard_regulators,
		.num_regulators = ARRAY_SIZE(moboard_regulators),
	},
	.leds = &moboard_leds,
	.buttons = &moboard_buttons,
	.codec = &moboard_codec,
	.flags = MC13XXX_USE_RTC | MC13XXX_USE_ADC | MC13XXX_USE_CODEC,
};

static struct imx_ssi_platform_data moboard_ssi_pdata = {
	.flags = IMX_SSI_DMA | IMX_SSI_NET,
};

static struct spi_board_info moboard_spi_board_info[] __initdata = {
	{
		.modalias = "mc13783",
		/* irq number is run-time assigned */
		.max_speed_hz = 300000,
		.bus_num = 1,
		.chip_select = 0,
		.platform_data = &moboard_pmic,
		.mode = SPI_CS_HIGH,
	},
};

static int moboard_spi2_cs[] = {
	MXC_SPI_CS(1),
};

static const struct spi_imx_master moboard_spi2_pdata __initconst = {
	.chipselect	= moboard_spi2_cs,
	.num_chipselect	= ARRAY_SIZE(moboard_spi2_cs),
};

#define SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_ATA_CS0)
#define SDHC1_WP IOMUX_TO_GPIO(MX31_PIN_ATA_CS1)

static int moboard_sdhc1_get_ro(struct device *dev)
{
	return !gpio_get_value(SDHC1_WP);
}

static int moboard_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
		void *data)
{
	int ret;

	ret = gpio_request(SDHC1_CD, "sdhc-detect");
	if (ret)
		return ret;

	gpio_direction_input(SDHC1_CD);

	ret = gpio_request(SDHC1_WP, "sdhc-wp");
	if (ret)
		goto err_gpio_free;
	gpio_direction_input(SDHC1_WP);

	ret = request_irq(gpio_to_irq(SDHC1_CD), detect_irq,
		IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
		"sdhc1-card-detect", data);
	if (ret)
		goto err_gpio_free_2;

	return 0;

err_gpio_free_2:
	gpio_free(SDHC1_WP);
err_gpio_free:
	gpio_free(SDHC1_CD);

	return ret;
}

static void moboard_sdhc1_exit(struct device *dev, void *data)
{
	free_irq(gpio_to_irq(SDHC1_CD), data);
	gpio_free(SDHC1_WP);
	gpio_free(SDHC1_CD);
}

static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
	.get_ro	= moboard_sdhc1_get_ro,
	.init	= moboard_sdhc1_init,
	.exit	= moboard_sdhc1_exit,
};

/*
 * this pin is dedicated for all mx31moboard systems, so we do it here
 */
#define USB_RESET_B	IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)
#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
		      PAD_CTL_ODE_CMOS)

#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
#define USBH2_EN_B IOMUX_TO_GPIO(MX31_PIN_SCK6)

static void usb_xcvr_reset(void)
{
	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG | PAD_CTL_100K_PD);
	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG | PAD_CTL_100K_PD);
	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG | PAD_CTL_100K_PD);
	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG | PAD_CTL_100K_PD);
	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG | PAD_CTL_100K_PD);
	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG | PAD_CTL_100K_PD);
	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG | PAD_CTL_100K_PD);
	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG | PAD_CTL_100K_PD);
	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG | PAD_CTL_100K_PU);
	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG | PAD_CTL_100K_PU);
	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG | PAD_CTL_100K_PU);
	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG | PAD_CTL_100K_PU);

	mxc_iomux_set_gpr(MUX_PGP_UH2, true);
	mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG | PAD_CTL_100K_PU);
	mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG | PAD_CTL_100K_PU);
	mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG | PAD_CTL_100K_PU);
	mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG | PAD_CTL_100K_PU);
	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG | PAD_CTL_100K_PD);
	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG | PAD_CTL_100K_PD);
	mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG | PAD_CTL_100K_PD);
	mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG | PAD_CTL_100K_PD);
	mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG | PAD_CTL_100K_PD);
	mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG | PAD_CTL_100K_PD);
	mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG | PAD_CTL_100K_PD);
	mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG | PAD_CTL_100K_PD);

	gpio_request(OTG_EN_B, "usb-udc-en");
	gpio_direction_output(OTG_EN_B, 0);
	gpio_request(USBH2_EN_B, "usbh2-en");
	gpio_direction_output(USBH2_EN_B, 0);

	gpio_request(USB_RESET_B, "usb-reset");
	gpio_direction_output(USB_RESET_B, 0);
	mdelay(1);
	gpio_set_value(USB_RESET_B, 1);
	mdelay(1);
}

static int moboard_usbh2_init_hw(struct platform_device *pdev)
{
	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
}

static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
	.init	= moboard_usbh2_init_hw,
	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
};

static int __init moboard_usbh2_init(void)
{
	struct platform_device *pdev;

	usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
			ULPI_OTG_DRVVBUS_EXT);
	if (!usbh2_pdata.otg)
		return -ENODEV;

	pdev = imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
	if (IS_ERR(pdev))
		return PTR_ERR(pdev);

	return 0;
}

static const struct gpio_led mx31moboard_leds[] __initconst = {
	{
		.name	= "coreboard-led-0:red:running",
		.default_trigger = "heartbeat",
		.gpio	= IOMUX_TO_GPIO(MX31_PIN_SVEN0),
	}, {
		.name	= "coreboard-led-1:red",
		.gpio	= IOMUX_TO_GPIO(MX31_PIN_STX0),
	}, {
		.name	= "coreboard-led-2:red",
		.gpio	= IOMUX_TO_GPIO(MX31_PIN_SRX0),
	}, {
		.name	= "coreboard-led-3:red",
		.gpio	= IOMUX_TO_GPIO(MX31_PIN_SIMPD0),
	},
};

static const struct gpio_led_platform_data mx31moboard_led_pdata __initconst = {
	.num_leds	= ARRAY_SIZE(mx31moboard_leds),
	.leds		= mx31moboard_leds,
};

static struct platform_device *devices[] __initdata = {
	&mx31moboard_flash,
};

static struct mx3_camera_pdata camera_pdata __initdata = {
	.flags		= MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
	.mclk_10khz	= 4800,
};

static phys_addr_t mx3_camera_base __initdata;
#define MX3_CAMERA_BUF_SIZE SZ_4M

static int __init mx31moboard_init_cam(void)
{
	int dma, ret = -ENOMEM;
	struct platform_device *pdev;

	imx31_add_ipu_core();

	pdev = imx31_alloc_mx3_camera(&camera_pdata);
	if (IS_ERR(pdev))
		return PTR_ERR(pdev);

	dma = dma_declare_coherent_memory(&pdev->dev,
					mx3_camera_base, mx3_camera_base,
					MX3_CAMERA_BUF_SIZE,
					DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
	if (!(dma & DMA_MEMORY_MAP))
		goto err;

	ret = platform_device_add(pdev);
	if (ret)
err:
		platform_device_put(pdev);

	return ret;

}

static void mx31moboard_poweroff(void)
{
	struct clk *clk = clk_get_sys("imx2-wdt.0", NULL);

	if (!IS_ERR(clk))
		clk_prepare_enable(clk);

	mxc_iomux_mode(MX31_PIN_WATCHDOG_RST__WATCHDOG_RST);

	__raw_writew(1 << 6 | 1 << 2, MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
}

static int mx31moboard_baseboard;
core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444);

/*
 * Board specific initialization.
 */
static void __init mx31moboard_init(void)
{
	imx31_soc_init();

	mxc_iomux_setup_multiple_pins(moboard_pins, ARRAY_SIZE(moboard_pins),
		"moboard");

	platform_add_devices(devices, ARRAY_SIZE(devices));
	gpio_led_register_device(-1, &mx31moboard_led_pdata);

	imx31_add_imx2_wdt();

	imx31_add_imx_uart0(&uart0_pdata);
	imx31_add_imx_uart4(&uart4_pdata);

	imx31_add_imx_i2c0(&moboard_i2c0_data);
	imx31_add_imx_i2c1(&moboard_i2c1_data);

	imx31_add_spi_imx1(&moboard_spi1_pdata);
	imx31_add_spi_imx2(&moboard_spi2_pdata);

	gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3), "pmic-irq");
	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
	moboard_spi_board_info[0].irq =
			gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
	spi_register_board_info(moboard_spi_board_info,
		ARRAY_SIZE(moboard_spi_board_info));

	imx31_add_mxc_mmc(0, &sdhc1_pdata);

	mx31moboard_init_cam();

	usb_xcvr_reset();

	moboard_usbh2_init();

	imx31_add_imx_ssi(0, &moboard_ssi_pdata);

	imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);

	pm_power_off = mx31moboard_poweroff;

	switch (mx31moboard_baseboard) {
	case MX31NOBOARD:
		break;
	case MX31DEVBOARD:
		mx31moboard_devboard_init();
		break;
	case MX31MARXBOT:
		mx31moboard_marxbot_init();
		break;
	case MX31SMARTBOT:
	case MX31EYEBOT:
		mx31moboard_smartbot_init(mx31moboard_baseboard);
		break;
	default:
		printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n",
			mx31moboard_baseboard);
	}
}

static void __init mx31moboard_timer_init(void)
{
	mx31_clocks_init(26000000);
}

static struct sys_timer mx31moboard_timer = {
	.init	= mx31moboard_timer_init,
};

static void __init mx31moboard_reserve(void)
{
	/* reserve 4 MiB for mx3-camera */
	mx3_camera_base = arm_memblock_steal(MX3_CAMERA_BUF_SIZE,
			MX3_CAMERA_BUF_SIZE);
}

MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
	/* Maintainer: Philippe Retornaz, EPFL Mobots group */
	.atag_offset = 0x100,
	.reserve = mx31moboard_reserve,
	.map_io = mx31_map_io,
	.init_early = imx31_init_early,
	.init_irq = mx31_init_irq,
	.handle_irq = imx31_handle_irq,
	.timer = &mx31moboard_timer,
	.init_machine = mx31moboard_init,
	.restart	= mxc_restart,
MACHINE_END
Commit	Line	Data
988d2d49 VL	1	/*
	2	* Copyright (C) 2008 Valentin Longchamp, EPFL Mobots group
	3	*
	4	* This program is free software; you can redistribute it and/or modify
	5	* it under the terms of the GNU General Public License as published by
	6	* the Free Software Foundation; either version 2 of the License, or
	7	* (at your option) any later version.
	8	*
	9	* This program is distributed in the hope that it will be useful,
	10	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	11	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	12	* GNU General Public License for more details.
988d2d49 VL	13	*/
988d2d49 VL	14
b23f1534	15	#include <linux/delay.h>
04ea3c80	16	#include <linux/dma-mapping.h>
5a0e3ad6	17	#include <linux/gfp.h>
45b131a7	18	#include <linux/gpio.h>
988d2d49	19	#include <linux/init.h>
45b131a7	20	#include <linux/interrupt.h>
9e907416	21	#include <linux/moduleparam.h>
77aa561d	22	#include <linux/leds.h>
220bbcea	23	#include <linux/memory.h>
988d2d49 VL	24	#include <linux/mtd/physmap.h>
988d2d49 VL	25	#include <linux/mtd/partitions.h>
220bbcea	26	#include <linux/platform_device.h>
65da9791 VL	27	#include <linux/regulator/machine.h>
	28	#include <linux/mfd/mc13783.h>
	29	#include <linux/spi/spi.h>
220bbcea	30	#include <linux/types.h>
031e9127	31	#include <linux/memblock.h>
40d97b89 PR	32	#include <linux/clk.h>
	33	#include <linux/io.h>
	34	#include <linux/err.h>
1f08c112	35	#include <linux/input.h>
988d2d49	36
d67d1075 VL	37	#include <linux/usb/otg.h>
	38	#include <linux/usb/ulpi.h>
	39
988d2d49 VL	40	#include <asm/mach-types.h>
	41	#include <asm/mach/arch.h>
	42	#include <asm/mach/time.h>
	43	#include <asm/mach/map.h>
716a3dc2	44	#include <asm/memblock.h>
82906b13	45	#include <linux/platform_data/asoc-imx-ssi.h>
988d2d49	46
3ed0bcb4	47	#include "board-mx31moboard.h"
e3372474	48	#include "common.h"
4a9b8b0b	49	#include "devices-imx31.h"
50f2de61	50	#include "hardware.h"
267dd34c	51	#include "iomux-mx3.h"
39ef6340	52	#include "ulpi.h"
988d2d49	53
220bbcea VL	54	static unsigned int moboard_pins[] = {
220bbcea VL	55	/* UART0 */
220bbcea	56	MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1,
421bf82e	57	MX31_PIN_CTS1__GPIO2_7,
220bbcea VL	58	/* UART4 */
	59	MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5,
	60	MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5,
56c7a45b VL	61	/* I2C0 */
	62	MX31_PIN_I2C_DAT__I2C1_SDA, MX31_PIN_I2C_CLK__I2C1_SCL,
	63	/* I2C1 */
	64	MX31_PIN_DCD_DTE1__I2C2_SDA, MX31_PIN_RI_DTE1__I2C2_SCL,
	65	/* SDHC1 */
	66	MX31_PIN_SD1_DATA3__SD1_DATA3, MX31_PIN_SD1_DATA2__SD1_DATA2,
	67	MX31_PIN_SD1_DATA1__SD1_DATA1, MX31_PIN_SD1_DATA0__SD1_DATA0,
	68	MX31_PIN_SD1_CLK__SD1_CLK, MX31_PIN_SD1_CMD__SD1_CMD,
	69	MX31_PIN_ATA_CS0__GPIO3_26, MX31_PIN_ATA_CS1__GPIO3_27,
b23f1534 VL	70	/* USB reset */
b23f1534 VL	71	MX31_PIN_GPIO1_0__GPIO1_0,
88b05647 VL	72	/* USB OTG */
	73	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
	74	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
	75	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
	76	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
	77	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
	78	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
	79	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
	80	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
	81	MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
	82	MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
	83	MX31_PIN_USB_OC__GPIO1_30,
d67d1075 VL	84	/* USB H2 */
	85	MX31_PIN_USBH2_DATA0__USBH2_DATA0,
	86	MX31_PIN_USBH2_DATA1__USBH2_DATA1,
	87	MX31_PIN_STXD3__USBH2_DATA2, MX31_PIN_SRXD3__USBH2_DATA3,
	88	MX31_PIN_SCK3__USBH2_DATA4, MX31_PIN_SFS3__USBH2_DATA5,
	89	MX31_PIN_STXD6__USBH2_DATA6, MX31_PIN_SRXD6__USBH2_DATA7,
	90	MX31_PIN_USBH2_CLK__USBH2_CLK, MX31_PIN_USBH2_DIR__USBH2_DIR,
	91	MX31_PIN_USBH2_NXT__USBH2_NXT, MX31_PIN_USBH2_STP__USBH2_STP,
	92	MX31_PIN_SCK6__GPIO1_25,
77aa561d VL	93	/* LEDs */
	94	MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1,
	95	MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3,
65da9791 VL	96	/* SPI1 */
	97	MX31_PIN_CSPI2_MOSI__MOSI, MX31_PIN_CSPI2_MISO__MISO,
	98	MX31_PIN_CSPI2_SCLK__SCLK, MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
	99	MX31_PIN_CSPI2_SS0__SS0, MX31_PIN_CSPI2_SS2__SS2,
	100	/* Atlas IRQ */
	101	MX31_PIN_GPIO1_3__GPIO1_3,
	102	/* SPI2 */
	103	MX31_PIN_CSPI3_MOSI__MOSI, MX31_PIN_CSPI3_MISO__MISO,
	104	MX31_PIN_CSPI3_SCLK__SCLK, MX31_PIN_CSPI3_SPI_RDY__SPI_RDY,
	105	MX31_PIN_CSPI2_SS1__CSPI3_SS1,
2f7b9451 PR	106	/* SSI */
	107	MX31_PIN_STXD4__STXD4, MX31_PIN_SRXD4__SRXD4,
	108	MX31_PIN_SCK4__SCK4, MX31_PIN_SFS4__SFS4,
220bbcea VL	109	};
220bbcea VL	110
988d2d49	111	static struct physmap_flash_data mx31moboard_flash_data = {
27ad4bf7	112	.width = 2,
988d2d49 VL	113	};
	114
	115	static struct resource mx31moboard_flash_resource = {
	116	.start = 0xa0000000,
	117	.end = 0xa1ffffff,
	118	.flags = IORESOURCE_MEM,
	119	};
	120
	121	static struct platform_device mx31moboard_flash = {
	122	.name = "physmap-flash",
	123	.id = 0,
	124	.dev = {
	125	.platform_data = &mx31moboard_flash_data,
	126	},
	127	.resource = &mx31moboard_flash_resource,
	128	.num_resources = 1,
	129	};
	130
421bf82e VL	131	static int moboard_uart0_init(struct platform_device *pdev)
421bf82e VL	132	{
5109a459 UKK	133	int ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack");
	134	if (ret)
	135	return ret;
	136
	137	ret = gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0);
	138	if (ret)
	139	gpio_free(IOMUX_TO_GPIO(MX31_PIN_CTS1));
	140
	141	return ret;
	142	}
	143
	144	static void moboard_uart0_exit(struct platform_device *pdev)
	145	{
	146	gpio_free(IOMUX_TO_GPIO(MX31_PIN_CTS1));
421bf82e VL	147	}
421bf82e VL	148
16cf5c41	149	static const struct imxuart_platform_data uart0_pdata __initconst = {
421bf82e	150	.init = moboard_uart0_init,
5109a459	151	.exit = moboard_uart0_exit,
421bf82e VL	152	};
421bf82e VL	153
16cf5c41	154	static const struct imxuart_platform_data uart4_pdata __initconst = {
988d2d49 VL	155	.flags = IMXUART_HAVE_RTSCTS,
	156	};
	157
4a9b8b0b	158	static const struct imxi2c_platform_data moboard_i2c0_data __initconst = {
4ec6ecc7 VL	159	.bitrate = 400000,
	160	};
	161
4a9b8b0b	162	static const struct imxi2c_platform_data moboard_i2c1_data __initconst = {
4ec6ecc7 VL	163	.bitrate = 100000,
	164	};
	165
65da9791 VL	166	static int moboard_spi1_cs[] = {
	167	MXC_SPI_CS(0),
	168	MXC_SPI_CS(2),
	169	};
	170
06606ff1	171	static const struct spi_imx_master moboard_spi1_pdata __initconst = {
65da9791 VL	172	.chipselect = moboard_spi1_cs,
	173	.num_chipselect = ARRAY_SIZE(moboard_spi1_cs),
	174	};
	175
	176	static struct regulator_consumer_supply sdhc_consumers[] = {
	177	{
7f917a8d	178	.dev_name = "imx31-mmc.0",
65da9791 VL	179	.supply = "sdhc0_vcc",
	180	},
	181	{
7f917a8d	182	.dev_name = "imx31-mmc.1",
65da9791 VL	183	.supply = "sdhc1_vcc",
	184	},
	185	};
	186
	187	static struct regulator_init_data sdhc_vreg_data = {
	188	.constraints = {
	189	.min_uV = 2700000,
	190	.max_uV = 3000000,
	191	.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE \|
	192	REGULATOR_CHANGE_MODE \| REGULATOR_CHANGE_STATUS,
	193	.valid_modes_mask = REGULATOR_MODE_NORMAL \|
	194	REGULATOR_MODE_FAST,
	195	.always_on = 0,
	196	.boot_on = 1,
	197	},
	198	.num_consumer_supplies = ARRAY_SIZE(sdhc_consumers),
	199	.consumer_supplies = sdhc_consumers,
	200	};
	201
	202	static struct regulator_consumer_supply cam_consumers[] = {
	203	{
afa77ef3 UKK	204	.dev_name = "mx3_camera.0",
afa77ef3 UKK	205	.supply = "cam_vcc",
65da9791 VL	206	},
	207	};
	208
	209	static struct regulator_init_data cam_vreg_data = {
	210	.constraints = {
	211	.min_uV = 2700000,
	212	.max_uV = 3000000,
	213	.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE \|
	214	REGULATOR_CHANGE_MODE \| REGULATOR_CHANGE_STATUS,
	215	.valid_modes_mask = REGULATOR_MODE_NORMAL \|
	216	REGULATOR_MODE_FAST,
	217	.always_on = 0,
	218	.boot_on = 1,
	219	},
	220	.num_consumer_supplies = ARRAY_SIZE(cam_consumers),
	221	.consumer_supplies = cam_consumers,
	222	};
	223
5836372e	224	static struct mc13xxx_regulator_init_data moboard_regulators[] = {
65da9791	225	{
57c78e35	226	.id = MC13783_REG_VMMC1,
65da9791 VL	227	.init_data = &sdhc_vreg_data,
	228	},
	229	{
57c78e35	230	.id = MC13783_REG_VCAM,
65da9791 VL	231	.init_data = &cam_vreg_data,
	232	},
	233	};
	234
d3efa4ed	235	static struct mc13xxx_led_platform_data moboard_led[] = {
a7cca8ae PR	236	{
	237	.id = MC13783_LED_R1,
	238	.name = "coreboard-led-4:red",
	239	.max_current = 2,
	240	},
	241	{
	242	.id = MC13783_LED_G1,
	243	.name = "coreboard-led-4:green",
	244	.max_current = 2,
	245	},
	246	{
	247	.id = MC13783_LED_B1,
	248	.name = "coreboard-led-4:blue",
	249	.max_current = 2,
	250	},
	251	{
	252	.id = MC13783_LED_R2,
	253	.name = "coreboard-led-5:red",
	254	.max_current = 3,
	255	},
	256	{
	257	.id = MC13783_LED_G2,
	258	.name = "coreboard-led-5:green",
	259	.max_current = 3,
	260	},
	261	{
	262	.id = MC13783_LED_B2,
	263	.name = "coreboard-led-5:blue",
	264	.max_current = 3,
	265	},
	266	};
	267
d3efa4ed	268	static struct mc13xxx_leds_platform_data moboard_leds = {
a7cca8ae PR	269	.num_leds = ARRAY_SIZE(moboard_led),
	270	.led = moboard_led,
	271	.flags = MC13783_LED_SLEWLIMTC,
	272	.abmode = MC13783_LED_AB_DISABLED,
	273	.tc1_period = MC13783_LED_PERIOD_10MS,
	274	.tc2_period = MC13783_LED_PERIOD_10MS,
	275	};
	276
d3efa4ed	277	static struct mc13xxx_buttons_platform_data moboard_buttons = {
1f08c112 PR	278	.b1on_flags = MC13783_BUTTON_DBNC_750MS \| MC13783_BUTTON_ENABLE \|
	279	MC13783_BUTTON_POL_INVERT,
	280	.b1on_key = KEY_POWER,
	281	};
	282
2f7b9451 PR	283	static struct mc13xxx_codec_platform_data moboard_codec = {
	284	.dac_ssi_port = MC13783_SSI1_PORT,
	285	.adc_ssi_port = MC13783_SSI1_PORT,
	286	};
	287
5836372e	288	static struct mc13xxx_platform_data moboard_pmic = {
4ec1b54c AS	289	.regulators = {
	290	.regulators = moboard_regulators,
	291	.num_regulators = ARRAY_SIZE(moboard_regulators),
	292	},
a7cca8ae	293	.leds = &moboard_leds,
1f08c112	294	.buttons = &moboard_buttons,
2f7b9451 PR	295	.codec = &moboard_codec,
	296	.flags = MC13XXX_USE_RTC \| MC13XXX_USE_ADC \| MC13XXX_USE_CODEC,
	297	};
	298
	299	static struct imx_ssi_platform_data moboard_ssi_pdata = {
	300	.flags = IMX_SSI_DMA \| IMX_SSI_NET,
65da9791 VL	301	};
	302
	303	static struct spi_board_info moboard_spi_board_info[] __initdata = {
	304	{
	305	.modalias = "mc13783",
ed175343	306	/* irq number is run-time assigned */
65da9791 VL	307	.max_speed_hz = 300000,
	308	.bus_num = 1,
	309	.chip_select = 0,
	310	.platform_data = &moboard_pmic,
	311	.mode = SPI_CS_HIGH,
	312	},
65da9791 VL	313	};
	314
	315	static int moboard_spi2_cs[] = {
	316	MXC_SPI_CS(1),
	317	};
	318
06606ff1	319	static const struct spi_imx_master moboard_spi2_pdata __initconst = {
65da9791 VL	320	.chipselect = moboard_spi2_cs,
	321	.num_chipselect = ARRAY_SIZE(moboard_spi2_cs),
	322	};
	323
45b131a7 VL	324	#define SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_ATA_CS0)
	325	#define SDHC1_WP IOMUX_TO_GPIO(MX31_PIN_ATA_CS1)
	326
	327	static int moboard_sdhc1_get_ro(struct device *dev)
	328	{
563abb4b	329	return !gpio_get_value(SDHC1_WP);
45b131a7 VL	330	}
	331
	332	static int moboard_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
	333	void *data)
	334	{
4f163eb8 SH	335	int ret;
	336
	337	ret = gpio_request(SDHC1_CD, "sdhc-detect");
	338	if (ret)
	339	return ret;
	340
	341	gpio_direction_input(SDHC1_CD);
	342
	343	ret = gpio_request(SDHC1_WP, "sdhc-wp");
	344	if (ret)
	345	goto err_gpio_free;
	346	gpio_direction_input(SDHC1_WP);
	347
	348	ret = request_irq(gpio_to_irq(SDHC1_CD), detect_irq,
45b131a7 VL	349	IRQF_TRIGGER_RISING \| IRQF_TRIGGER_FALLING,
45b131a7 VL	350	"sdhc1-card-detect", data);
4f163eb8 SH	351	if (ret)
	352	goto err_gpio_free_2;
	353
	354	return 0;
	355
	356	err_gpio_free_2:
	357	gpio_free(SDHC1_WP);
	358	err_gpio_free:
	359	gpio_free(SDHC1_CD);
	360
	361	return ret;
45b131a7 VL	362	}
	363
	364	static void moboard_sdhc1_exit(struct device dev, void data)
	365	{
	366	free_irq(gpio_to_irq(SDHC1_CD), data);
4f163eb8 SH	367	gpio_free(SDHC1_WP);
4f163eb8 SH	368	gpio_free(SDHC1_CD);
45b131a7 VL	369	}
45b131a7 VL	370
6a697e3d	371	static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
45b131a7 VL	372	.get_ro = moboard_sdhc1_get_ro,
	373	.init = moboard_sdhc1_init,
	374	.exit = moboard_sdhc1_exit,
	375	};
	376
b23f1534 VL	377	/*
	378	* this pin is dedicated for all mx31moboard systems, so we do it here
	379	*/
	380	#define USB_RESET_B IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)
88b05647	381	#define USB_PAD_CFG (PAD_CTL_DRV_MAX \| PAD_CTL_SRE_FAST \| PAD_CTL_HYS_CMOS \| \
25783602	382	PAD_CTL_ODE_CMOS)
88b05647 VL	383
88b05647 VL	384	#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
25783602	385	#define USBH2_EN_B IOMUX_TO_GPIO(MX31_PIN_SCK6)
88b05647	386
25783602	387	static void usb_xcvr_reset(void)
88b05647	388	{
25783602 PR	389	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG \| PAD_CTL_100K_PD);
	390	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG \| PAD_CTL_100K_PD);
	391	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG \| PAD_CTL_100K_PD);
	392	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG \| PAD_CTL_100K_PD);
	393	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG \| PAD_CTL_100K_PD);
	394	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG \| PAD_CTL_100K_PD);
	395	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG \| PAD_CTL_100K_PD);
	396	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG \| PAD_CTL_100K_PD);
	397	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG \| PAD_CTL_100K_PU);
	398	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG \| PAD_CTL_100K_PU);
	399	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG \| PAD_CTL_100K_PU);
	400	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG \| PAD_CTL_100K_PU);
	401
	402	mxc_iomux_set_gpr(MUX_PGP_UH2, true);
	403	mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG \| PAD_CTL_100K_PU);
	404	mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG \| PAD_CTL_100K_PU);
	405	mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG \| PAD_CTL_100K_PU);
	406	mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG \| PAD_CTL_100K_PU);
	407	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG \| PAD_CTL_100K_PD);
	408	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG \| PAD_CTL_100K_PD);
	409	mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG \| PAD_CTL_100K_PD);
	410	mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG \| PAD_CTL_100K_PD);
	411	mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG \| PAD_CTL_100K_PD);
	412	mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG \| PAD_CTL_100K_PD);
	413	mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG \| PAD_CTL_100K_PD);
	414	mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG \| PAD_CTL_100K_PD);
88b05647 VL	415
	416	gpio_request(OTG_EN_B, "usb-udc-en");
	417	gpio_direction_output(OTG_EN_B, 0);
25783602 PR	418	gpio_request(USBH2_EN_B, "usbh2-en");
	419	gpio_direction_output(USBH2_EN_B, 0);
	420
	421	gpio_request(USB_RESET_B, "usb-reset");
	422	gpio_direction_output(USB_RESET_B, 0);
	423	mdelay(1);
	424	gpio_set_value(USB_RESET_B, 1);
	425	mdelay(1);
88b05647 VL	426	}
88b05647 VL	427
4bd597b6 SH	428	static int moboard_usbh2_init_hw(struct platform_device *pdev)
	429	{
	430	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
	431	}
f9ffaa9c	432
2d58de28	433	static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
4bd597b6	434	.init = moboard_usbh2_init_hw,
d67d1075	435	.portsc = MXC_EHCI_MODE_ULPI \| MXC_EHCI_UTMI_8BIT,
d67d1075 VL	436	};
	437
	438	static int __init moboard_usbh2_init(void)
	439	{
2d58de28 UKK	440	struct platform_device *pdev;
2d58de28 UKK	441
48f6b099 SH	442	usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS \|
	443	ULPI_OTG_DRVVBUS_EXT);
	444	if (!usbh2_pdata.otg)
	445	return -ENODEV;
d67d1075	446
2d58de28 UKK	447	pdev = imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
	448	if (IS_ERR(pdev))
	449	return PTR_ERR(pdev);
	450
	451	return 0;
d67d1075	452	}
d67d1075	453
47e837b5	454	static const struct gpio_led mx31moboard_leds[] __initconst = {
77aa561d	455	{
27ad4bf7	456	.name = "coreboard-led-0:red:running",
77aa561d	457	.default_trigger = "heartbeat",
27ad4bf7	458	.gpio = IOMUX_TO_GPIO(MX31_PIN_SVEN0),
77aa561d VL	459	}, {
	460	.name = "coreboard-led-1:red",
	461	.gpio = IOMUX_TO_GPIO(MX31_PIN_STX0),
	462	}, {
	463	.name = "coreboard-led-2:red",
	464	.gpio = IOMUX_TO_GPIO(MX31_PIN_SRX0),
	465	}, {
	466	.name = "coreboard-led-3:red",
	467	.gpio = IOMUX_TO_GPIO(MX31_PIN_SIMPD0),
	468	},
	469	};
	470
47e837b5	471	static const struct gpio_led_platform_data mx31moboard_led_pdata __initconst = {
27ad4bf7	472	.num_leds = ARRAY_SIZE(mx31moboard_leds),
77aa561d VL	473	.leds = mx31moboard_leds,
	474	};
	475
988d2d49 VL	476	static struct platform_device *devices[] __initdata = {
	477	&mx31moboard_flash,
	478	};
	479
afa77ef3	480	static struct mx3_camera_pdata camera_pdata __initdata = {
04ea3c80 VL	481	.flags = MX3_CAMERA_DATAWIDTH_8 \| MX3_CAMERA_DATAWIDTH_10,
	482	.mclk_10khz = 4800,
	483	};
	484
031e9127 UKK	485	static phys_addr_t mx3_camera_base __initdata;
031e9127 UKK	486	#define MX3_CAMERA_BUF_SIZE SZ_4M
04ea3c80	487
afa77ef3	488	static int __init mx31moboard_init_cam(void)
04ea3c80	489	{
afa77ef3 UKK	490	int dma, ret = -ENOMEM;
	491	struct platform_device *pdev;
	492
88289c80	493	imx31_add_ipu_core();
04ea3c80	494
afa77ef3 UKK	495	pdev = imx31_alloc_mx3_camera(&camera_pdata);
	496	if (IS_ERR(pdev))
	497	return PTR_ERR(pdev);
04ea3c80	498
afa77ef3	499	dma = dma_declare_coherent_memory(&pdev->dev,
031e9127 UKK	500	mx3_camera_base, mx3_camera_base,
031e9127 UKK	501	MX3_CAMERA_BUF_SIZE,
04ea3c80	502	DMA_MEMORY_MAP \| DMA_MEMORY_EXCLUSIVE);
afa77ef3 UKK	503	if (!(dma & DMA_MEMORY_MAP))
	504	goto err;
	505
	506	ret = platform_device_add(pdev);
	507	if (ret)
	508	err:
	509	platform_device_put(pdev);
	510
	511	return ret;
04ea3c80	512
04ea3c80 VL	513	}
04ea3c80 VL	514
40d97b89 PR	515	static void mx31moboard_poweroff(void)
	516	{
	517	struct clk *clk = clk_get_sys("imx2-wdt.0", NULL);
	518
	519	if (!IS_ERR(clk))
8186064c	520	clk_prepare_enable(clk);
40d97b89 PR	521
	522	mxc_iomux_mode(MX31_PIN_WATCHDOG_RST__WATCHDOG_RST);
	523
	524	__raw_writew(1 << 6 \| 1 << 2, MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
	525	}
	526
e00f0b4a VL	527	static int mx31moboard_baseboard;
	528	core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444);
	529
988d2d49 VL	530	/*
	531	* Board specific initialization.
	532	*/
e134fb2b	533	static void __init mx31moboard_init(void)
988d2d49	534	{
b78d8e59 SG	535	imx31_soc_init();
b78d8e59 SG	536
220bbcea VL	537	mxc_iomux_setup_multiple_pins(moboard_pins, ARRAY_SIZE(moboard_pins),
	538	"moboard");
	539
988d2d49	540	platform_add_devices(devices, ARRAY_SIZE(devices));
47e837b5	541	gpio_led_register_device(-1, &mx31moboard_led_pdata);
988d2d49	542
bec31a85	543	imx31_add_imx2_wdt();
31776fbc	544
16cf5c41 UKK	545	imx31_add_imx_uart0(&uart0_pdata);
16cf5c41 UKK	546	imx31_add_imx_uart4(&uart4_pdata);
e00f0b4a	547
4a9b8b0b UKK	548	imx31_add_imx_i2c0(&moboard_i2c0_data);
4a9b8b0b UKK	549	imx31_add_imx_i2c1(&moboard_i2c1_data);
4ec6ecc7	550
06606ff1 UKK	551	imx31_add_spi_imx1(&moboard_spi1_pdata);
06606ff1 UKK	552	imx31_add_spi_imx2(&moboard_spi2_pdata);
65da9791 VL	553
	554	gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3), "pmic-irq");
	555	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
ed175343 SG	556	moboard_spi_board_info[0].irq =
ed175343 SG	557	gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
65da9791 VL	558	spi_register_board_info(moboard_spi_board_info,
	559	ARRAY_SIZE(moboard_spi_board_info));
	560
6a697e3d	561	imx31_add_mxc_mmc(0, &sdhc1_pdata);
45b131a7	562
afa77ef3	563	mx31moboard_init_cam();
4dd71293	564
b23f1534 VL	565	usb_xcvr_reset();
b23f1534 VL	566
d67d1075	567	moboard_usbh2_init();
88b05647	568
2f7b9451 PR	569	imx31_add_imx_ssi(0, &moboard_ssi_pdata);
	570
	571	imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
	572
40d97b89 PR	573	pm_power_off = mx31moboard_poweroff;
40d97b89 PR	574
e00f0b4a VL	575	switch (mx31moboard_baseboard) {
	576	case MX31NOBOARD:
	577	break;
	578	case MX31DEVBOARD:
	579	mx31moboard_devboard_init();
	580	break;
	581	case MX31MARXBOT:
	582	mx31moboard_marxbot_init();
	583	break;
e335c75c	584	case MX31SMARTBOT:
3a47b1a4 PR	585	case MX31EYEBOT:
3a47b1a4 PR	586	mx31moboard_smartbot_init(mx31moboard_baseboard);
e335c75c	587	break;
e00f0b4a	588	default:
220bbcea VL	589	printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n",
220bbcea VL	590	mx31moboard_baseboard);
e00f0b4a	591	}
988d2d49 VL	592	}
988d2d49 VL	593
988d2d49 VL	594	static void __init mx31moboard_timer_init(void)
988d2d49 VL	595	{
30c730f8	596	mx31_clocks_init(26000000);
988d2d49 VL	597	}
988d2d49 VL	598
7bf1c875	599	static struct sys_timer mx31moboard_timer = {
988d2d49 VL	600	.init = mx31moboard_timer_init,
	601	};
	602
031e9127 UKK	603	static void __init mx31moboard_reserve(void)
	604	{
	605	/* reserve 4 MiB for mx3-camera */
716a3dc2	606	mx3_camera_base = arm_memblock_steal(MX3_CAMERA_BUF_SIZE,
031e9127	607	MX3_CAMERA_BUF_SIZE);
031e9127 UKK	608	}
031e9127 UKK	609
988d2d49	610	MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
0fbe6b07	611	/* Maintainer: Philippe Retornaz, EPFL Mobots group */
dc8f1907	612	.atag_offset = 0x100,
031e9127	613	.reserve = mx31moboard_reserve,
97976e22 UKK	614	.map_io = mx31_map_io,
	615	.init_early = imx31_init_early,
	616	.init_irq = mx31_init_irq,
ffa2ea3f	617	.handle_irq = imx31_handle_irq,
97976e22	618	.timer = &mx31moboard_timer,
e134fb2b	619	.init_machine = mx31moboard_init,
65ea7884	620	.restart = mxc_restart,
988d2d49	621	MACHINE_END