Commit | Line | Data |
---|---|---|
a1f1c7ef | 1 | /* |
df595746 | 2 | * Copyright 2011-2014 Freescale Semiconductor, Inc. |
a1f1c7ef SG |
3 | * Copyright 2011 Linaro Ltd. |
4 | * | |
5 | * The code contained herein is licensed under the GNU General Public | |
6 | * License. You may obtain a copy of the GNU General Public License | |
7 | * Version 2 or later at the following locations: | |
8 | * | |
9 | * http://www.opensource.org/licenses/gpl-license.html | |
10 | * http://www.gnu.org/copyleft/gpl.html | |
11 | */ | |
12 | ||
9e8147bb | 13 | #include <linux/delay.h> |
a1f1c7ef SG |
14 | #include <linux/init.h> |
15 | #include <linux/io.h> | |
d48866fe | 16 | #include <linux/irq.h> |
df595746 | 17 | #include <linux/genalloc.h> |
d48866fe SG |
18 | #include <linux/mfd/syscon.h> |
19 | #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h> | |
a1f1c7ef | 20 | #include <linux/of.h> |
9e8147bb | 21 | #include <linux/of_address.h> |
df595746 | 22 | #include <linux/of_platform.h> |
d48866fe | 23 | #include <linux/regmap.h> |
a1f1c7ef SG |
24 | #include <linux/suspend.h> |
25 | #include <asm/cacheflush.h> | |
df595746 | 26 | #include <asm/fncpy.h> |
a1f1c7ef SG |
27 | #include <asm/proc-fns.h> |
28 | #include <asm/suspend.h> | |
df595746 | 29 | #include <asm/tlb.h> |
a1f1c7ef | 30 | |
e3372474 | 31 | #include "common.h" |
50f2de61 | 32 | #include "hardware.h" |
e3372474 | 33 | |
9e8147bb SG |
34 | #define CCR 0x0 |
35 | #define BM_CCR_WB_COUNT (0x7 << 16) | |
36 | #define BM_CCR_RBC_BYPASS_COUNT (0x3f << 21) | |
37 | #define BM_CCR_RBC_EN (0x1 << 27) | |
38 | ||
39 | #define CLPCR 0x54 | |
40 | #define BP_CLPCR_LPM 0 | |
41 | #define BM_CLPCR_LPM (0x3 << 0) | |
42 | #define BM_CLPCR_BYPASS_PMIC_READY (0x1 << 2) | |
43 | #define BM_CLPCR_ARM_CLK_DIS_ON_LPM (0x1 << 5) | |
44 | #define BM_CLPCR_SBYOS (0x1 << 6) | |
45 | #define BM_CLPCR_DIS_REF_OSC (0x1 << 7) | |
46 | #define BM_CLPCR_VSTBY (0x1 << 8) | |
47 | #define BP_CLPCR_STBY_COUNT 9 | |
48 | #define BM_CLPCR_STBY_COUNT (0x3 << 9) | |
49 | #define BM_CLPCR_COSC_PWRDOWN (0x1 << 11) | |
50 | #define BM_CLPCR_WB_PER_AT_LPM (0x1 << 16) | |
51 | #define BM_CLPCR_WB_CORE_AT_LPM (0x1 << 17) | |
52 | #define BM_CLPCR_BYP_MMDC_CH0_LPM_HS (0x1 << 19) | |
53 | #define BM_CLPCR_BYP_MMDC_CH1_LPM_HS (0x1 << 21) | |
54 | #define BM_CLPCR_MASK_CORE0_WFI (0x1 << 22) | |
55 | #define BM_CLPCR_MASK_CORE1_WFI (0x1 << 23) | |
56 | #define BM_CLPCR_MASK_CORE2_WFI (0x1 << 24) | |
57 | #define BM_CLPCR_MASK_CORE3_WFI (0x1 << 25) | |
58 | #define BM_CLPCR_MASK_SCU_IDLE (0x1 << 26) | |
59 | #define BM_CLPCR_MASK_L2CC_IDLE (0x1 << 27) | |
60 | ||
61 | #define CGPR 0x64 | |
fa6be65e | 62 | #define BM_CGPR_INT_MEM_CLK_LPM (0x1 << 17) |
9e8147bb | 63 | |
df595746 AH |
64 | #define MX6Q_SUSPEND_OCRAM_SIZE 0x1000 |
65 | #define MX6_MAX_MMDC_IO_NUM 33 | |
66 | ||
9e8147bb | 67 | static void __iomem *ccm_base; |
df595746 AH |
68 | static void __iomem *suspend_ocram_base; |
69 | static void (*imx6_suspend_in_ocram_fn)(void __iomem *ocram_vbase); | |
70 | ||
71 | /* | |
72 | * suspend ocram space layout: | |
73 | * ======================== high address ====================== | |
74 | * . | |
75 | * . | |
76 | * . | |
77 | * ^ | |
78 | * ^ | |
79 | * ^ | |
80 | * imx6_suspend code | |
81 | * PM_INFO structure(imx6_cpu_pm_info) | |
82 | * ======================== low address ======================= | |
83 | */ | |
84 | ||
85 | struct imx6_pm_base { | |
86 | phys_addr_t pbase; | |
87 | void __iomem *vbase; | |
88 | }; | |
89 | ||
90 | struct imx6_pm_socdata { | |
91 | u32 cpu_type; | |
92 | const char *mmdc_compat; | |
93 | const char *src_compat; | |
94 | const char *iomuxc_compat; | |
95 | const char *gpc_compat; | |
96 | const u32 mmdc_io_num; | |
97 | const u32 *mmdc_io_offset; | |
98 | }; | |
99 | ||
100 | static const u32 imx6q_mmdc_io_offset[] __initconst = { | |
101 | 0x5ac, 0x5b4, 0x528, 0x520, /* DQM0 ~ DQM3 */ | |
102 | 0x514, 0x510, 0x5bc, 0x5c4, /* DQM4 ~ DQM7 */ | |
103 | 0x56c, 0x578, 0x588, 0x594, /* CAS, RAS, SDCLK_0, SDCLK_1 */ | |
104 | 0x5a8, 0x5b0, 0x524, 0x51c, /* SDQS0 ~ SDQS3 */ | |
105 | 0x518, 0x50c, 0x5b8, 0x5c0, /* SDQS4 ~ SDQS7 */ | |
106 | 0x784, 0x788, 0x794, 0x79c, /* GPR_B0DS ~ GPR_B3DS */ | |
107 | 0x7a0, 0x7a4, 0x7a8, 0x748, /* GPR_B4DS ~ GPR_B7DS */ | |
108 | 0x59c, 0x5a0, 0x750, 0x774, /* SODT0, SODT1, MODE_CTL, MODE */ | |
109 | 0x74c, /* GPR_ADDS */ | |
110 | }; | |
111 | ||
da9e9261 AH |
112 | static const u32 imx6dl_mmdc_io_offset[] __initconst = { |
113 | 0x470, 0x474, 0x478, 0x47c, /* DQM0 ~ DQM3 */ | |
114 | 0x480, 0x484, 0x488, 0x48c, /* DQM4 ~ DQM7 */ | |
115 | 0x464, 0x490, 0x4ac, 0x4b0, /* CAS, RAS, SDCLK_0, SDCLK_1 */ | |
116 | 0x4bc, 0x4c0, 0x4c4, 0x4c8, /* DRAM_SDQS0 ~ DRAM_SDQS3 */ | |
117 | 0x4cc, 0x4d0, 0x4d4, 0x4d8, /* DRAM_SDQS4 ~ DRAM_SDQS7 */ | |
118 | 0x764, 0x770, 0x778, 0x77c, /* GPR_B0DS ~ GPR_B3DS */ | |
119 | 0x780, 0x784, 0x78c, 0x748, /* GPR_B4DS ~ GPR_B7DS */ | |
120 | 0x4b4, 0x4b8, 0x750, 0x760, /* SODT0, SODT1, MODE_CTL, MODE */ | |
121 | 0x74c, /* GPR_ADDS */ | |
122 | }; | |
123 | ||
64b08681 AH |
124 | static const u32 imx6sl_mmdc_io_offset[] __initconst = { |
125 | 0x30c, 0x310, 0x314, 0x318, /* DQM0 ~ DQM3 */ | |
126 | 0x5c4, 0x5cc, 0x5d4, 0x5d8, /* GPR_B0DS ~ GPR_B3DS */ | |
127 | 0x300, 0x31c, 0x338, 0x5ac, /* CAS, RAS, SDCLK_0, GPR_ADDS */ | |
128 | 0x33c, 0x340, 0x5b0, 0x5c0, /* SODT0, SODT1, MODE_CTL, MODE */ | |
129 | 0x330, 0x334, 0x320, /* SDCKE0, SDCKE1, RESET */ | |
130 | }; | |
131 | ||
df595746 AH |
132 | static const struct imx6_pm_socdata imx6q_pm_data __initconst = { |
133 | .cpu_type = MXC_CPU_IMX6Q, | |
134 | .mmdc_compat = "fsl,imx6q-mmdc", | |
135 | .src_compat = "fsl,imx6q-src", | |
136 | .iomuxc_compat = "fsl,imx6q-iomuxc", | |
137 | .gpc_compat = "fsl,imx6q-gpc", | |
138 | .mmdc_io_num = ARRAY_SIZE(imx6q_mmdc_io_offset), | |
139 | .mmdc_io_offset = imx6q_mmdc_io_offset, | |
140 | }; | |
141 | ||
da9e9261 AH |
142 | static const struct imx6_pm_socdata imx6dl_pm_data __initconst = { |
143 | .cpu_type = MXC_CPU_IMX6DL, | |
144 | .mmdc_compat = "fsl,imx6q-mmdc", | |
145 | .src_compat = "fsl,imx6q-src", | |
146 | .iomuxc_compat = "fsl,imx6dl-iomuxc", | |
147 | .gpc_compat = "fsl,imx6q-gpc", | |
148 | .mmdc_io_num = ARRAY_SIZE(imx6dl_mmdc_io_offset), | |
149 | .mmdc_io_offset = imx6dl_mmdc_io_offset, | |
150 | }; | |
151 | ||
64b08681 AH |
152 | static const struct imx6_pm_socdata imx6sl_pm_data __initconst = { |
153 | .cpu_type = MXC_CPU_IMX6SL, | |
154 | .mmdc_compat = "fsl,imx6sl-mmdc", | |
155 | .src_compat = "fsl,imx6sl-src", | |
156 | .iomuxc_compat = "fsl,imx6sl-iomuxc", | |
157 | .gpc_compat = "fsl,imx6sl-gpc", | |
158 | .mmdc_io_num = ARRAY_SIZE(imx6sl_mmdc_io_offset), | |
159 | .mmdc_io_offset = imx6sl_mmdc_io_offset, | |
160 | }; | |
161 | ||
df595746 AH |
162 | /* |
163 | * This structure is for passing necessary data for low level ocram | |
164 | * suspend code(arch/arm/mach-imx/suspend-imx6.S), if this struct | |
165 | * definition is changed, the offset definition in | |
166 | * arch/arm/mach-imx/suspend-imx6.S must be also changed accordingly, | |
167 | * otherwise, the suspend to ocram function will be broken! | |
168 | */ | |
169 | struct imx6_cpu_pm_info { | |
170 | phys_addr_t pbase; /* The physical address of pm_info. */ | |
171 | phys_addr_t resume_addr; /* The physical resume address for asm code */ | |
172 | u32 cpu_type; | |
173 | u32 pm_info_size; /* Size of pm_info. */ | |
174 | struct imx6_pm_base mmdc_base; | |
175 | struct imx6_pm_base src_base; | |
176 | struct imx6_pm_base iomuxc_base; | |
177 | struct imx6_pm_base ccm_base; | |
178 | struct imx6_pm_base gpc_base; | |
179 | struct imx6_pm_base l2_base; | |
180 | u32 mmdc_io_num; /* Number of MMDC IOs which need saved/restored. */ | |
181 | u32 mmdc_io_val[MX6_MAX_MMDC_IO_NUM][2]; /* To save offset and value */ | |
182 | } __aligned(8); | |
9e8147bb | 183 | |
fa6be65e | 184 | void imx6q_set_int_mem_clk_lpm(void) |
9e8147bb SG |
185 | { |
186 | u32 val = readl_relaxed(ccm_base + CGPR); | |
187 | ||
fa6be65e | 188 | val |= BM_CGPR_INT_MEM_CLK_LPM; |
9e8147bb SG |
189 | writel_relaxed(val, ccm_base + CGPR); |
190 | } | |
191 | ||
192 | static void imx6q_enable_rbc(bool enable) | |
193 | { | |
194 | u32 val; | |
9e8147bb | 195 | |
9e8147bb SG |
196 | /* |
197 | * need to mask all interrupts in GPC before | |
198 | * operating RBC configurations | |
199 | */ | |
200 | imx_gpc_mask_all(); | |
201 | ||
202 | /* configure RBC enable bit */ | |
203 | val = readl_relaxed(ccm_base + CCR); | |
204 | val &= ~BM_CCR_RBC_EN; | |
205 | val |= enable ? BM_CCR_RBC_EN : 0; | |
206 | writel_relaxed(val, ccm_base + CCR); | |
207 | ||
208 | /* configure RBC count */ | |
209 | val = readl_relaxed(ccm_base + CCR); | |
210 | val &= ~BM_CCR_RBC_BYPASS_COUNT; | |
211 | val |= enable ? BM_CCR_RBC_BYPASS_COUNT : 0; | |
212 | writel(val, ccm_base + CCR); | |
213 | ||
214 | /* | |
215 | * need to delay at least 2 cycles of CKIL(32K) | |
216 | * due to hardware design requirement, which is | |
217 | * ~61us, here we use 65us for safe | |
218 | */ | |
219 | udelay(65); | |
220 | ||
221 | /* restore GPC interrupt mask settings */ | |
222 | imx_gpc_restore_all(); | |
9e8147bb SG |
223 | } |
224 | ||
225 | static void imx6q_enable_wb(bool enable) | |
226 | { | |
227 | u32 val; | |
9e8147bb SG |
228 | |
229 | /* configure well bias enable bit */ | |
230 | val = readl_relaxed(ccm_base + CLPCR); | |
231 | val &= ~BM_CLPCR_WB_PER_AT_LPM; | |
232 | val |= enable ? BM_CLPCR_WB_PER_AT_LPM : 0; | |
233 | writel_relaxed(val, ccm_base + CLPCR); | |
234 | ||
235 | /* configure well bias count */ | |
236 | val = readl_relaxed(ccm_base + CCR); | |
237 | val &= ~BM_CCR_WB_COUNT; | |
238 | val |= enable ? BM_CCR_WB_COUNT : 0; | |
239 | writel_relaxed(val, ccm_base + CCR); | |
9e8147bb SG |
240 | } |
241 | ||
242 | int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode) | |
243 | { | |
ff050ad1 | 244 | struct irq_data *iomuxc_irq_data = irq_get_irq_data(32); |
9e8147bb SG |
245 | u32 val = readl_relaxed(ccm_base + CLPCR); |
246 | ||
247 | val &= ~BM_CLPCR_LPM; | |
248 | switch (mode) { | |
249 | case WAIT_CLOCKED: | |
9e8147bb SG |
250 | break; |
251 | case WAIT_UNCLOCKED: | |
252 | val |= 0x1 << BP_CLPCR_LPM; | |
253 | val |= BM_CLPCR_ARM_CLK_DIS_ON_LPM; | |
254 | break; | |
255 | case STOP_POWER_ON: | |
256 | val |= 0x2 << BP_CLPCR_LPM; | |
257 | break; | |
258 | case WAIT_UNCLOCKED_POWER_OFF: | |
259 | val |= 0x1 << BP_CLPCR_LPM; | |
260 | val &= ~BM_CLPCR_VSTBY; | |
261 | val &= ~BM_CLPCR_SBYOS; | |
262 | break; | |
263 | case STOP_POWER_OFF: | |
264 | val |= 0x2 << BP_CLPCR_LPM; | |
265 | val |= 0x3 << BP_CLPCR_STBY_COUNT; | |
266 | val |= BM_CLPCR_VSTBY; | |
267 | val |= BM_CLPCR_SBYOS; | |
9ba64fe3 SG |
268 | if (cpu_is_imx6sl()) { |
269 | val |= BM_CLPCR_BYPASS_PMIC_READY; | |
270 | val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS; | |
271 | } else { | |
272 | val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS; | |
273 | } | |
9e8147bb SG |
274 | break; |
275 | default: | |
276 | return -EINVAL; | |
277 | } | |
278 | ||
d48866fe | 279 | /* |
48c95841 AH |
280 | * ERR007265: CCM: When improper low-power sequence is used, |
281 | * the SoC enters low power mode before the ARM core executes WFI. | |
282 | * | |
283 | * Software workaround: | |
284 | * 1) Software should trigger IRQ #32 (IOMUX) to be always pending | |
285 | * by setting IOMUX_GPR1_GINT. | |
286 | * 2) Software should then unmask IRQ #32 in GPC before setting CCM | |
287 | * Low-Power mode. | |
288 | * 3) Software should mask IRQ #32 right after CCM Low-Power mode | |
289 | * is set (set bits 0-1 of CCM_CLPCR). | |
d48866fe | 290 | */ |
ff050ad1 | 291 | imx_gpc_irq_unmask(iomuxc_irq_data); |
9e8147bb | 292 | writel_relaxed(val, ccm_base + CLPCR); |
ff050ad1 | 293 | imx_gpc_irq_mask(iomuxc_irq_data); |
9e8147bb SG |
294 | |
295 | return 0; | |
296 | } | |
297 | ||
a1f1c7ef SG |
298 | static int imx6q_suspend_finish(unsigned long val) |
299 | { | |
df595746 AH |
300 | if (!imx6_suspend_in_ocram_fn) { |
301 | cpu_do_idle(); | |
302 | } else { | |
303 | /* | |
304 | * call low level suspend function in ocram, | |
305 | * as we need to float DDR IO. | |
306 | */ | |
307 | local_flush_tlb_all(); | |
308 | imx6_suspend_in_ocram_fn(suspend_ocram_base); | |
309 | } | |
310 | ||
a1f1c7ef SG |
311 | return 0; |
312 | } | |
313 | ||
314 | static int imx6q_pm_enter(suspend_state_t state) | |
315 | { | |
316 | switch (state) { | |
317 | case PM_SUSPEND_MEM: | |
318 | imx6q_set_lpm(STOP_POWER_OFF); | |
1d674a73 | 319 | imx6q_enable_wb(true); |
df595746 AH |
320 | /* |
321 | * For suspend into ocram, asm code already take care of | |
322 | * RBC setting, so we do NOT need to do that here. | |
323 | */ | |
324 | if (!imx6_suspend_in_ocram_fn) | |
325 | imx6q_enable_rbc(true); | |
a1f1c7ef | 326 | imx_gpc_pre_suspend(); |
e95dddb3 | 327 | imx_anatop_pre_suspend(); |
a1f1c7ef SG |
328 | imx_set_cpu_jump(0, v7_cpu_resume); |
329 | /* Zzz ... */ | |
330 | cpu_suspend(0, imx6q_suspend_finish); | |
9ba64fe3 SG |
331 | if (cpu_is_imx6q() || cpu_is_imx6dl()) |
332 | imx_smp_prepare(); | |
e95dddb3 | 333 | imx_anatop_post_resume(); |
a1f1c7ef | 334 | imx_gpc_post_resume(); |
1d674a73 SG |
335 | imx6q_enable_rbc(false); |
336 | imx6q_enable_wb(false); | |
83ae2098 | 337 | imx6q_set_lpm(WAIT_CLOCKED); |
a1f1c7ef SG |
338 | break; |
339 | default: | |
340 | return -EINVAL; | |
341 | } | |
342 | ||
343 | return 0; | |
344 | } | |
345 | ||
346 | static const struct platform_suspend_ops imx6q_pm_ops = { | |
347 | .enter = imx6q_pm_enter, | |
348 | .valid = suspend_valid_only_mem, | |
349 | }; | |
350 | ||
9e8147bb SG |
351 | void __init imx6q_pm_set_ccm_base(void __iomem *base) |
352 | { | |
353 | ccm_base = base; | |
354 | } | |
355 | ||
df595746 AH |
356 | static int __init imx6_pm_get_base(struct imx6_pm_base *base, |
357 | const char *compat) | |
358 | { | |
359 | struct device_node *node; | |
360 | struct resource res; | |
361 | int ret = 0; | |
362 | ||
363 | node = of_find_compatible_node(NULL, NULL, compat); | |
364 | if (!node) { | |
365 | ret = -ENODEV; | |
366 | goto out; | |
367 | } | |
368 | ||
369 | ret = of_address_to_resource(node, 0, &res); | |
370 | if (ret) | |
371 | goto put_node; | |
372 | ||
373 | base->pbase = res.start; | |
374 | base->vbase = ioremap(res.start, resource_size(&res)); | |
375 | if (!base->vbase) | |
376 | ret = -ENOMEM; | |
377 | ||
378 | put_node: | |
379 | of_node_put(node); | |
380 | out: | |
381 | return ret; | |
382 | } | |
383 | ||
afc51f46 | 384 | static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata) |
df595746 AH |
385 | { |
386 | phys_addr_t ocram_pbase; | |
387 | struct device_node *node; | |
388 | struct platform_device *pdev; | |
389 | struct imx6_cpu_pm_info *pm_info; | |
390 | struct gen_pool *ocram_pool; | |
391 | unsigned long ocram_base; | |
392 | int i, ret = 0; | |
393 | const u32 *mmdc_offset_array; | |
394 | ||
afc51f46 SG |
395 | suspend_set_ops(&imx6q_pm_ops); |
396 | ||
df595746 AH |
397 | if (!socdata) { |
398 | pr_warn("%s: invalid argument!\n", __func__); | |
399 | return -EINVAL; | |
400 | } | |
401 | ||
402 | node = of_find_compatible_node(NULL, NULL, "mmio-sram"); | |
403 | if (!node) { | |
404 | pr_warn("%s: failed to find ocram node!\n", __func__); | |
405 | return -ENODEV; | |
406 | } | |
407 | ||
408 | pdev = of_find_device_by_node(node); | |
409 | if (!pdev) { | |
410 | pr_warn("%s: failed to find ocram device!\n", __func__); | |
411 | ret = -ENODEV; | |
412 | goto put_node; | |
413 | } | |
414 | ||
415 | ocram_pool = dev_get_gen_pool(&pdev->dev); | |
416 | if (!ocram_pool) { | |
417 | pr_warn("%s: ocram pool unavailable!\n", __func__); | |
418 | ret = -ENODEV; | |
419 | goto put_node; | |
420 | } | |
421 | ||
422 | ocram_base = gen_pool_alloc(ocram_pool, MX6Q_SUSPEND_OCRAM_SIZE); | |
423 | if (!ocram_base) { | |
424 | pr_warn("%s: unable to alloc ocram!\n", __func__); | |
425 | ret = -ENOMEM; | |
426 | goto put_node; | |
427 | } | |
428 | ||
429 | ocram_pbase = gen_pool_virt_to_phys(ocram_pool, ocram_base); | |
430 | ||
431 | suspend_ocram_base = __arm_ioremap_exec(ocram_pbase, | |
432 | MX6Q_SUSPEND_OCRAM_SIZE, false); | |
433 | ||
434 | pm_info = suspend_ocram_base; | |
435 | pm_info->pbase = ocram_pbase; | |
436 | pm_info->resume_addr = virt_to_phys(v7_cpu_resume); | |
437 | pm_info->pm_info_size = sizeof(*pm_info); | |
438 | ||
439 | /* | |
440 | * ccm physical address is not used by asm code currently, | |
441 | * so get ccm virtual address directly, as we already have | |
442 | * it from ccm driver. | |
443 | */ | |
444 | pm_info->ccm_base.vbase = ccm_base; | |
445 | ||
446 | ret = imx6_pm_get_base(&pm_info->mmdc_base, socdata->mmdc_compat); | |
447 | if (ret) { | |
448 | pr_warn("%s: failed to get mmdc base %d!\n", __func__, ret); | |
449 | goto put_node; | |
450 | } | |
451 | ||
452 | ret = imx6_pm_get_base(&pm_info->src_base, socdata->src_compat); | |
453 | if (ret) { | |
454 | pr_warn("%s: failed to get src base %d!\n", __func__, ret); | |
455 | goto src_map_failed; | |
456 | } | |
457 | ||
458 | ret = imx6_pm_get_base(&pm_info->iomuxc_base, socdata->iomuxc_compat); | |
459 | if (ret) { | |
460 | pr_warn("%s: failed to get iomuxc base %d!\n", __func__, ret); | |
461 | goto iomuxc_map_failed; | |
462 | } | |
463 | ||
464 | ret = imx6_pm_get_base(&pm_info->gpc_base, socdata->gpc_compat); | |
465 | if (ret) { | |
466 | pr_warn("%s: failed to get gpc base %d!\n", __func__, ret); | |
467 | goto gpc_map_failed; | |
468 | } | |
469 | ||
470 | ret = imx6_pm_get_base(&pm_info->l2_base, "arm,pl310-cache"); | |
471 | if (ret) { | |
472 | pr_warn("%s: failed to get pl310-cache base %d!\n", | |
473 | __func__, ret); | |
474 | goto pl310_cache_map_failed; | |
475 | } | |
476 | ||
477 | pm_info->cpu_type = socdata->cpu_type; | |
478 | pm_info->mmdc_io_num = socdata->mmdc_io_num; | |
479 | mmdc_offset_array = socdata->mmdc_io_offset; | |
480 | ||
481 | for (i = 0; i < pm_info->mmdc_io_num; i++) { | |
482 | pm_info->mmdc_io_val[i][0] = | |
483 | mmdc_offset_array[i]; | |
484 | pm_info->mmdc_io_val[i][1] = | |
485 | readl_relaxed(pm_info->iomuxc_base.vbase + | |
486 | mmdc_offset_array[i]); | |
487 | } | |
488 | ||
489 | imx6_suspend_in_ocram_fn = fncpy( | |
490 | suspend_ocram_base + sizeof(*pm_info), | |
491 | &imx6_suspend, | |
492 | MX6Q_SUSPEND_OCRAM_SIZE - sizeof(*pm_info)); | |
493 | ||
494 | goto put_node; | |
495 | ||
496 | pl310_cache_map_failed: | |
497 | iounmap(&pm_info->gpc_base.vbase); | |
498 | gpc_map_failed: | |
499 | iounmap(&pm_info->iomuxc_base.vbase); | |
500 | iomuxc_map_failed: | |
501 | iounmap(&pm_info->src_base.vbase); | |
502 | src_map_failed: | |
503 | iounmap(&pm_info->mmdc_base.vbase); | |
504 | put_node: | |
505 | of_node_put(node); | |
506 | ||
507 | return ret; | |
508 | } | |
509 | ||
510 | static void __init imx6_pm_common_init(const struct imx6_pm_socdata | |
511 | *socdata) | |
a1f1c7ef | 512 | { |
d48866fe | 513 | struct regmap *gpr; |
df595746 | 514 | int ret; |
d48866fe | 515 | |
9e8147bb SG |
516 | WARN_ON(!ccm_base); |
517 | ||
110666dc SG |
518 | if (IS_ENABLED(CONFIG_SUSPEND)) { |
519 | ret = imx6q_suspend_init(socdata); | |
520 | if (ret) | |
521 | pr_warn("%s: No DDR LPM support with suspend %d!\n", | |
522 | __func__, ret); | |
523 | } | |
df595746 | 524 | |
d48866fe | 525 | /* |
48c95841 AH |
526 | * This is for SW workaround step #1 of ERR007265, see comments |
527 | * in imx6q_set_lpm for details of this errata. | |
d48866fe SG |
528 | * Force IOMUXC irq pending, so that the interrupt to GPC can be |
529 | * used to deassert dsm_request signal when the signal gets | |
530 | * asserted unexpectedly. | |
531 | */ | |
532 | gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr"); | |
533 | if (!IS_ERR(gpr)) | |
534 | regmap_update_bits(gpr, IOMUXC_GPR1, IMX6Q_GPR1_GINT, | |
535 | IMX6Q_GPR1_GINT); | |
a1f1c7ef | 536 | } |
df595746 AH |
537 | |
538 | void __init imx6q_pm_init(void) | |
539 | { | |
540 | imx6_pm_common_init(&imx6q_pm_data); | |
541 | } | |
542 | ||
543 | void __init imx6dl_pm_init(void) | |
544 | { | |
da9e9261 | 545 | imx6_pm_common_init(&imx6dl_pm_data); |
df595746 AH |
546 | } |
547 | ||
548 | void __init imx6sl_pm_init(void) | |
549 | { | |
64b08681 | 550 | imx6_pm_common_init(&imx6sl_pm_data); |
df595746 | 551 | } |