Commit | Line | Data |
---|---|---|
586dcf27 MM |
1 | /* |
2 | * | |
287989ca | 3 | * QNAP TS-11x/TS-21x Turbo NAS Board Setup |
586dcf27 MM |
4 | * |
5 | * Copyright (C) 2009 Martin Michlmayr <tbm@cyrius.com> | |
6 | * Copyright (C) 2008 Byron Bradley <byron.bbradley@gmail.com> | |
7 | * | |
8 | * This program is free software; you can redistribute it and/or | |
9 | * modify it under the terms of the GNU General Public License | |
10 | * as published by the Free Software Foundation; either version | |
11 | * 2 of the License, or (at your option) any later version. | |
12 | */ | |
13 | ||
14 | #include <linux/kernel.h> | |
15 | #include <linux/init.h> | |
16 | #include <linux/platform_device.h> | |
586dcf27 MM |
17 | #include <linux/i2c.h> |
18 | #include <linux/mv643xx_eth.h> | |
19 | #include <linux/ata_platform.h> | |
20 | #include <linux/gpio_keys.h> | |
21 | #include <linux/input.h> | |
586dcf27 MM |
22 | #include <asm/mach-types.h> |
23 | #include <asm/mach/arch.h> | |
24 | #include <mach/kirkwood.h> | |
25 | #include "common.h" | |
26 | #include "mpp.h" | |
8d27b2f7 | 27 | #include "tsx1x-common.h" |
586dcf27 MM |
28 | |
29 | static struct i2c_board_info __initdata qnap_ts219_i2c_rtc = { | |
30 | I2C_BOARD_INFO("s35390a", 0x30), | |
31 | }; | |
32 | ||
33 | static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = { | |
34 | .phy_addr = MV643XX_ETH_PHY_ADDR(8), | |
35 | }; | |
36 | ||
37 | static struct mv_sata_platform_data qnap_ts219_sata_data = { | |
38 | .n_ports = 2, | |
39 | }; | |
40 | ||
41 | static struct gpio_keys_button qnap_ts219_buttons[] = { | |
42 | { | |
43 | .code = KEY_COPY, | |
44 | .gpio = 15, | |
45 | .desc = "USB Copy", | |
46 | .active_low = 1, | |
47 | }, | |
48 | { | |
49 | .code = KEY_RESTART, | |
50 | .gpio = 16, | |
51 | .desc = "Reset", | |
52 | .active_low = 1, | |
53 | }, | |
54 | }; | |
55 | ||
56 | static struct gpio_keys_platform_data qnap_ts219_button_data = { | |
57 | .buttons = qnap_ts219_buttons, | |
58 | .nbuttons = ARRAY_SIZE(qnap_ts219_buttons), | |
59 | }; | |
60 | ||
61 | static struct platform_device qnap_ts219_button_device = { | |
62 | .name = "gpio-keys", | |
63 | .id = -1, | |
64 | .num_resources = 0, | |
65 | .dev = { | |
66 | .platform_data = &qnap_ts219_button_data, | |
67 | } | |
68 | }; | |
69 | ||
70 | static unsigned int qnap_ts219_mpp_config[] __initdata = { | |
71 | MPP0_SPI_SCn, | |
72 | MPP1_SPI_MOSI, | |
73 | MPP2_SPI_SCK, | |
74 | MPP3_SPI_MISO, | |
385aa9e7 TR |
75 | MPP4_SATA1_ACTn, |
76 | MPP5_SATA0_ACTn, | |
266a2458 BZ |
77 | MPP8_TW0_SDA, |
78 | MPP9_TW0_SCK, | |
586dcf27 MM |
79 | MPP10_UART0_TXD, |
80 | MPP11_UART0_RXD, | |
81 | MPP13_UART1_TXD, /* PIC controller */ | |
82 | MPP14_UART1_RXD, /* PIC controller */ | |
ce56d169 MM |
83 | MPP15_GPIO, /* USB Copy button (on devices with 88F6281) */ |
84 | MPP16_GPIO, /* Reset button (on devices with 88F6281) */ | |
b421950c | 85 | MPP36_GPIO, /* RAM: 0: 256 MB, 1: 512 MB */ |
ce56d169 MM |
86 | MPP37_GPIO, /* Reset button (on devices with 88F6282) */ |
87 | MPP43_GPIO, /* USB Copy button (on devices with 88F6282) */ | |
128190eb | 88 | MPP44_GPIO, /* Board ID: 0: TS-11x, 1: TS-21x */ |
586dcf27 MM |
89 | 0 |
90 | }; | |
91 | ||
586dcf27 MM |
92 | static void __init qnap_ts219_init(void) |
93 | { | |
ce56d169 MM |
94 | u32 dev, rev; |
95 | ||
586dcf27 MM |
96 | /* |
97 | * Basic setup. Needs to be called early. | |
98 | */ | |
99 | kirkwood_init(); | |
100 | kirkwood_mpp_conf(qnap_ts219_mpp_config); | |
101 | ||
102 | kirkwood_uart0_init(); | |
103 | kirkwood_uart1_init(); /* A PIC controller is connected here. */ | |
8d27b2f7 | 104 | qnap_tsx1x_register_flash(); |
586dcf27 MM |
105 | kirkwood_i2c_init(); |
106 | i2c_register_board_info(0, &qnap_ts219_i2c_rtc, 1); | |
ce56d169 MM |
107 | |
108 | kirkwood_pcie_id(&dev, &rev); | |
109 | if (dev == MV88F6282_DEV_ID) { | |
110 | qnap_ts219_buttons[0].gpio = 43; /* USB Copy button */ | |
111 | qnap_ts219_buttons[1].gpio = 37; /* Reset button */ | |
112 | qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0); | |
113 | } | |
114 | ||
586dcf27 MM |
115 | kirkwood_ge00_init(&qnap_ts219_ge00_data); |
116 | kirkwood_sata_init(&qnap_ts219_sata_data); | |
117 | kirkwood_ehci_init(); | |
118 | platform_device_register(&qnap_ts219_button_device); | |
119 | ||
8d27b2f7 | 120 | pm_power_off = qnap_tsx1x_power_off; |
586dcf27 MM |
121 | |
122 | } | |
123 | ||
c55bf102 JH |
124 | static int __init ts219_pci_init(void) |
125 | { | |
ffd58bd2 SB |
126 | if (machine_is_ts219()) |
127 | kirkwood_pcie_init(KW_PCIE0); | |
c55bf102 | 128 | |
ffd58bd2 | 129 | return 0; |
c55bf102 JH |
130 | } |
131 | subsys_initcall(ts219_pci_init); | |
132 | ||
586dcf27 MM |
133 | MACHINE_START(TS219, "QNAP TS-119/TS-219") |
134 | /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */ | |
1b7bd28c | 135 | .atag_offset = 0x100, |
586dcf27 MM |
136 | .init_machine = qnap_ts219_init, |
137 | .map_io = kirkwood_map_io, | |
4ee1f6b5 | 138 | .init_early = kirkwood_init_early, |
586dcf27 | 139 | .init_irq = kirkwood_init_irq, |
6bb27d73 | 140 | .init_time = kirkwood_timer_init, |
cb15dff4 | 141 | .restart = kirkwood_restart, |
586dcf27 | 142 | MACHINE_END |