Commit | Line | Data |
---|---|---|
e00f0b4a VL |
1 | /* |
2 | * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group | |
3 | * | |
4 | * This program is free software; you can redistribute it and/or modify | |
5 | * it under the terms of the GNU General Public License as published by | |
6 | * the Free Software Foundation; either version 2 of the License, or | |
7 | * (at your option) any later version. | |
8 | * | |
9 | * This program is distributed in the hope that it will be useful, | |
10 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
11 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
12 | * GNU General Public License for more details. | |
e00f0b4a VL |
13 | */ |
14 | ||
04ea3c80 | 15 | #include <linux/delay.h> |
45b131a7 | 16 | #include <linux/gpio.h> |
e00f0b4a | 17 | #include <linux/init.h> |
45b131a7 | 18 | #include <linux/interrupt.h> |
04ea3c80 | 19 | #include <linux/i2c.h> |
33c4d919 | 20 | #include <linux/spi/spi.h> |
5a0e3ad6 | 21 | #include <linux/slab.h> |
e00f0b4a | 22 | #include <linux/platform_device.h> |
220bbcea | 23 | #include <linux/types.h> |
e00f0b4a | 24 | |
d67d1075 VL |
25 | #include <linux/usb/otg.h> |
26 | ||
e00f0b4a | 27 | #include <mach/common.h> |
220bbcea | 28 | #include <mach/hardware.h> |
e00f0b4a VL |
29 | #include <mach/imx-uart.h> |
30 | #include <mach/iomux-mx3.h> | |
d67d1075 | 31 | #include <mach/ulpi.h> |
e00f0b4a | 32 | |
04ea3c80 VL |
33 | #include <media/soc_camera.h> |
34 | ||
6a697e3d | 35 | #include "devices-imx31.h" |
e00f0b4a VL |
36 | #include "devices.h" |
37 | ||
56c7a45b VL |
38 | static unsigned int marxbot_pins[] = { |
39 | /* SDHC2 */ | |
40 | MX31_PIN_PC_PWRON__SD2_DATA3, MX31_PIN_PC_VS1__SD2_DATA2, | |
41 | MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0, | |
42 | MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD, | |
43 | MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29, | |
44 | /* CSI */ | |
56c7a45b VL |
45 | MX31_PIN_CSI_D6__CSI_D6, MX31_PIN_CSI_D7__CSI_D7, |
46 | MX31_PIN_CSI_D8__CSI_D8, MX31_PIN_CSI_D9__CSI_D9, | |
47 | MX31_PIN_CSI_D10__CSI_D10, MX31_PIN_CSI_D11__CSI_D11, | |
48 | MX31_PIN_CSI_D12__CSI_D12, MX31_PIN_CSI_D13__CSI_D13, | |
49 | MX31_PIN_CSI_D14__CSI_D14, MX31_PIN_CSI_D15__CSI_D15, | |
50 | MX31_PIN_CSI_HSYNC__CSI_HSYNC, MX31_PIN_CSI_MCLK__CSI_MCLK, | |
51 | MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC, | |
04ea3c80 | 52 | MX31_PIN_CSI_D4__GPIO3_4, MX31_PIN_CSI_D5__GPIO3_5, |
56c7a45b VL |
53 | MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1, |
54 | MX31_PIN_TXD2__GPIO1_28, | |
2718c15c VL |
55 | /* dsPIC resets */ |
56 | MX31_PIN_STXD5__GPIO1_21, MX31_PIN_SRXD5__GPIO1_22, | |
10949fff VL |
57 | /*battery detection */ |
58 | MX31_PIN_LCS0__GPIO3_23, | |
d67d1075 VL |
59 | /* USB H1 */ |
60 | MX31_PIN_CSPI1_MISO__USBH1_RXDP, MX31_PIN_CSPI1_MOSI__USBH1_RXDM, | |
61 | MX31_PIN_CSPI1_SS0__USBH1_TXDM, MX31_PIN_CSPI1_SS1__USBH1_TXDP, | |
62 | MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB, | |
63 | MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND, | |
64 | MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12, | |
e335c75c VL |
65 | /* SEL */ |
66 | MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9, | |
67 | MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11, | |
56c7a45b VL |
68 | }; |
69 | ||
45b131a7 VL |
70 | #define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR) |
71 | #define SDHC2_WP IOMUX_TO_GPIO(MX31_PIN_ATA_DIOW) | |
72 | ||
73 | static int marxbot_sdhc2_get_ro(struct device *dev) | |
74 | { | |
563abb4b | 75 | return !gpio_get_value(SDHC2_WP); |
45b131a7 VL |
76 | } |
77 | ||
78 | static int marxbot_sdhc2_init(struct device *dev, irq_handler_t detect_irq, | |
79 | void *data) | |
80 | { | |
4f163eb8 SH |
81 | int ret; |
82 | ||
83 | ret = gpio_request(SDHC2_CD, "sdhc-detect"); | |
84 | if (ret) | |
85 | return ret; | |
86 | ||
87 | gpio_direction_input(SDHC2_CD); | |
88 | ||
89 | ret = gpio_request(SDHC2_WP, "sdhc-wp"); | |
90 | if (ret) | |
91 | goto err_gpio_free; | |
92 | gpio_direction_input(SDHC2_WP); | |
93 | ||
94 | ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq, | |
45b131a7 VL |
95 | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, |
96 | "sdhc2-card-detect", data); | |
4f163eb8 SH |
97 | if (ret) |
98 | goto err_gpio_free_2; | |
99 | ||
100 | return 0; | |
101 | ||
102 | err_gpio_free_2: | |
103 | gpio_free(SDHC2_WP); | |
104 | err_gpio_free: | |
105 | gpio_free(SDHC2_CD); | |
106 | ||
107 | return ret; | |
45b131a7 VL |
108 | } |
109 | ||
110 | static void marxbot_sdhc2_exit(struct device *dev, void *data) | |
111 | { | |
112 | free_irq(gpio_to_irq(SDHC2_CD), data); | |
4f163eb8 SH |
113 | gpio_free(SDHC2_WP); |
114 | gpio_free(SDHC2_CD); | |
45b131a7 VL |
115 | } |
116 | ||
6a697e3d | 117 | static const struct imxmmc_platform_data sdhc2_pdata __initconst = { |
45b131a7 VL |
118 | .get_ro = marxbot_sdhc2_get_ro, |
119 | .init = marxbot_sdhc2_init, | |
120 | .exit = marxbot_sdhc2_exit, | |
121 | }; | |
122 | ||
2718c15c VL |
123 | #define TRSLAT_RST_B IOMUX_TO_GPIO(MX31_PIN_STXD5) |
124 | #define DSPICS_RST_B IOMUX_TO_GPIO(MX31_PIN_SRXD5) | |
125 | ||
126 | static void dspics_resets_init(void) | |
127 | { | |
128 | if (!gpio_request(TRSLAT_RST_B, "translator-rst")) { | |
f8594c28 | 129 | gpio_direction_output(TRSLAT_RST_B, 0); |
2718c15c VL |
130 | gpio_export(TRSLAT_RST_B, false); |
131 | } | |
132 | ||
133 | if (!gpio_request(DSPICS_RST_B, "dspics-rst")) { | |
f8594c28 | 134 | gpio_direction_output(DSPICS_RST_B, 0); |
2718c15c VL |
135 | gpio_export(DSPICS_RST_B, false); |
136 | } | |
137 | } | |
138 | ||
33c4d919 VL |
139 | static struct spi_board_info marxbot_spi_board_info[] __initdata = { |
140 | { | |
141 | .modalias = "spidev", | |
142 | .max_speed_hz = 300000, | |
143 | .bus_num = 1, | |
144 | .chip_select = 1, /* according spi1_cs[] ! */ | |
145 | }, | |
146 | }; | |
147 | ||
04ea3c80 VL |
148 | #define TURRETCAM_POWER IOMUX_TO_GPIO(MX31_PIN_GPIO3_1) |
149 | #define BASECAM_POWER IOMUX_TO_GPIO(MX31_PIN_CSI_D5) | |
150 | #define TURRETCAM_RST_B IOMUX_TO_GPIO(MX31_PIN_GPIO3_0) | |
151 | #define BASECAM_RST_B IOMUX_TO_GPIO(MX31_PIN_CSI_D4) | |
152 | #define CAM_CHOICE IOMUX_TO_GPIO(MX31_PIN_TXD2) | |
153 | ||
154 | static int marxbot_basecam_power(struct device *dev, int on) | |
155 | { | |
156 | gpio_set_value(BASECAM_POWER, !on); | |
157 | return 0; | |
158 | } | |
159 | ||
160 | static int marxbot_basecam_reset(struct device *dev) | |
161 | { | |
162 | gpio_set_value(BASECAM_RST_B, 0); | |
163 | udelay(100); | |
164 | gpio_set_value(BASECAM_RST_B, 1); | |
165 | return 0; | |
166 | } | |
167 | ||
168 | static struct i2c_board_info marxbot_i2c_devices[] = { | |
169 | { | |
170 | I2C_BOARD_INFO("mt9t031", 0x5d), | |
171 | }, | |
172 | }; | |
173 | ||
174 | static struct soc_camera_link base_iclink = { | |
175 | .bus_id = 0, /* Must match with the camera ID */ | |
176 | .power = marxbot_basecam_power, | |
177 | .reset = marxbot_basecam_reset, | |
178 | .board_info = &marxbot_i2c_devices[0], | |
179 | .i2c_adapter_id = 0, | |
04ea3c80 VL |
180 | }; |
181 | ||
182 | static struct platform_device marxbot_camera[] = { | |
183 | { | |
184 | .name = "soc-camera-pdrv", | |
185 | .id = 0, | |
186 | .dev = { | |
187 | .platform_data = &base_iclink, | |
188 | }, | |
189 | }, | |
190 | }; | |
191 | ||
192 | static struct platform_device *marxbot_cameras[] __initdata = { | |
193 | &marxbot_camera[0], | |
194 | }; | |
195 | ||
196 | static int __init marxbot_cam_init(void) | |
197 | { | |
198 | int ret = gpio_request(CAM_CHOICE, "cam-choice"); | |
199 | if (ret) | |
200 | return ret; | |
f8594c28 | 201 | gpio_direction_output(CAM_CHOICE, 0); |
04ea3c80 VL |
202 | |
203 | ret = gpio_request(BASECAM_RST_B, "basecam-reset"); | |
204 | if (ret) | |
205 | return ret; | |
206 | gpio_direction_output(BASECAM_RST_B, 1); | |
207 | ret = gpio_request(BASECAM_POWER, "basecam-standby"); | |
208 | if (ret) | |
209 | return ret; | |
210 | gpio_direction_output(BASECAM_POWER, 0); | |
211 | ||
212 | ret = gpio_request(TURRETCAM_RST_B, "turretcam-reset"); | |
213 | if (ret) | |
214 | return ret; | |
215 | gpio_direction_output(TURRETCAM_RST_B, 1); | |
216 | ret = gpio_request(TURRETCAM_POWER, "turretcam-standby"); | |
217 | if (ret) | |
218 | return ret; | |
219 | gpio_direction_output(TURRETCAM_POWER, 0); | |
220 | ||
221 | return 0; | |
222 | } | |
223 | ||
e335c75c VL |
224 | #define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1) |
225 | #define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1) | |
226 | #define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1) | |
227 | #define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1) | |
228 | ||
229 | static void marxbot_init_sel_gpios(void) | |
230 | { | |
231 | if (!gpio_request(SEL0, "sel0")) { | |
232 | gpio_direction_input(SEL0); | |
233 | gpio_export(SEL0, true); | |
234 | } | |
235 | ||
236 | if (!gpio_request(SEL1, "sel1")) { | |
237 | gpio_direction_input(SEL1); | |
238 | gpio_export(SEL1, true); | |
239 | } | |
240 | ||
241 | if (!gpio_request(SEL2, "sel2")) { | |
242 | gpio_direction_input(SEL2); | |
243 | gpio_export(SEL2, true); | |
244 | } | |
245 | ||
246 | if (!gpio_request(SEL3, "sel3")) { | |
247 | gpio_direction_input(SEL3); | |
248 | gpio_export(SEL3, true); | |
249 | } | |
250 | } | |
251 | ||
d67d1075 VL |
252 | #define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ |
253 | PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) | |
254 | ||
255 | static int marxbot_usbh1_hw_init(struct platform_device *pdev) | |
256 | { | |
257 | mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true); | |
258 | ||
259 | mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG); | |
260 | mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG); | |
261 | mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG); | |
262 | mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG); | |
263 | mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG); | |
264 | mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG); | |
265 | mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG); | |
266 | mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG); | |
267 | ||
4bd597b6 SH |
268 | mdelay(10); |
269 | ||
270 | return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED | | |
271 | MXC_EHCI_INTERFACE_SINGLE_UNI); | |
d67d1075 VL |
272 | } |
273 | ||
274 | #define USBH1_VBUSEN_B IOMUX_TO_GPIO(MX31_PIN_NFRE_B) | |
275 | #define USBH1_MODE IOMUX_TO_GPIO(MX31_PIN_NFALE) | |
276 | ||
277 | static int marxbot_isp1105_init(struct otg_transceiver *otg) | |
278 | { | |
279 | int ret = gpio_request(USBH1_MODE, "usbh1-mode"); | |
280 | if (ret) | |
281 | return ret; | |
282 | /* single ended */ | |
283 | gpio_direction_output(USBH1_MODE, 0); | |
284 | ||
285 | ret = gpio_request(USBH1_VBUSEN_B, "usbh1-vbusen"); | |
286 | if (ret) { | |
287 | gpio_free(USBH1_MODE); | |
288 | return ret; | |
289 | } | |
290 | gpio_direction_output(USBH1_VBUSEN_B, 1); | |
291 | ||
292 | return 0; | |
293 | } | |
294 | ||
295 | ||
296 | static int marxbot_isp1105_set_vbus(struct otg_transceiver *otg, bool on) | |
297 | { | |
298 | if (on) | |
299 | gpio_set_value(USBH1_VBUSEN_B, 0); | |
300 | else | |
301 | gpio_set_value(USBH1_VBUSEN_B, 1); | |
302 | ||
303 | return 0; | |
304 | } | |
305 | ||
2d58de28 | 306 | static struct mxc_usbh_platform_data usbh1_pdata __initdata = { |
d67d1075 VL |
307 | .init = marxbot_usbh1_hw_init, |
308 | .portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL, | |
d67d1075 VL |
309 | }; |
310 | ||
311 | static int __init marxbot_usbh1_init(void) | |
312 | { | |
313 | struct otg_transceiver *otg; | |
2d58de28 | 314 | struct platform_device *pdev; |
d67d1075 VL |
315 | |
316 | otg = kzalloc(sizeof(*otg), GFP_KERNEL); | |
317 | if (!otg) | |
318 | return -ENOMEM; | |
319 | ||
320 | otg->label = "ISP1105"; | |
321 | otg->init = marxbot_isp1105_init; | |
322 | otg->set_vbus = marxbot_isp1105_set_vbus; | |
323 | ||
324 | usbh1_pdata.otg = otg; | |
325 | ||
2d58de28 UKK |
326 | pdev = imx31_add_mxc_ehci_hs(1, &usbh1_pdata); |
327 | if (IS_ERR(pdev)) | |
328 | return PTR_ERR(pdev); | |
329 | ||
330 | return 0; | |
d67d1075 VL |
331 | } |
332 | ||
9e1dde33 | 333 | static const struct fsl_usb2_platform_data usb_pdata __initconst = { |
66c202ad PR |
334 | .operating_mode = FSL_USB2_DR_DEVICE, |
335 | .phy_mode = FSL_USB2_PHY_ULPI, | |
336 | }; | |
337 | ||
e00f0b4a VL |
338 | /* |
339 | * system init for baseboard usage. Will be called by mx31moboard init. | |
340 | */ | |
341 | void __init mx31moboard_marxbot_init(void) | |
342 | { | |
343 | printk(KERN_INFO "Initializing mx31marxbot peripherals\n"); | |
56c7a45b VL |
344 | |
345 | mxc_iomux_setup_multiple_pins(marxbot_pins, ARRAY_SIZE(marxbot_pins), | |
346 | "marxbot"); | |
45b131a7 | 347 | |
e335c75c VL |
348 | marxbot_init_sel_gpios(); |
349 | ||
2718c15c VL |
350 | dspics_resets_init(); |
351 | ||
6a697e3d | 352 | imx31_add_mxc_mmc(1, &sdhc2_pdata); |
10949fff | 353 | |
33c4d919 VL |
354 | spi_register_board_info(marxbot_spi_board_info, |
355 | ARRAY_SIZE(marxbot_spi_board_info)); | |
356 | ||
04ea3c80 VL |
357 | marxbot_cam_init(); |
358 | platform_add_devices(marxbot_cameras, ARRAY_SIZE(marxbot_cameras)); | |
359 | ||
10949fff VL |
360 | /* battery present pin */ |
361 | gpio_request(IOMUX_TO_GPIO(MX31_PIN_LCS0), "bat-present"); | |
362 | gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_LCS0)); | |
363 | gpio_export(IOMUX_TO_GPIO(MX31_PIN_LCS0), false); | |
d67d1075 | 364 | |
9e1dde33 | 365 | imx31_add_fsl_usb2_udc(&usb_pdata); |
66c202ad | 366 | |
d67d1075 | 367 | marxbot_usbh1_init(); |
e00f0b4a | 368 | } |