Commit | Line | Data |
---|---|---|
1da177e4 | 1 | /* |
dbdf9ced | 2 | * linux/arch/arm/mach-omap1/board-osk.c |
1da177e4 LT |
3 | * |
4 | * Board specific init for OMAP5912 OSK | |
5 | * | |
6 | * Written by Dirk Behme <dirk.behme@de.bosch.com> | |
7 | * | |
8 | * This program is free software; you can redistribute it and/or modify it | |
9 | * under the terms of the GNU General Public License as published by the | |
10 | * Free Software Foundation; either version 2 of the License, or (at your | |
11 | * option) any later version. | |
12 | * | |
13 | * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED | |
14 | * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF | |
15 | * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN | |
16 | * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, | |
17 | * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT | |
18 | * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF | |
19 | * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON | |
20 | * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | |
21 | * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF | |
22 | * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
23 | * | |
24 | * You should have received a copy of the GNU General Public License along | |
25 | * with this program; if not, write to the Free Software Foundation, Inc., | |
26 | * 675 Mass Ave, Cambridge, MA 02139, USA. | |
27 | */ | |
2f8163ba | 28 | #include <linux/gpio.h> |
1da177e4 LT |
29 | #include <linux/kernel.h> |
30 | #include <linux/init.h> | |
d052d1be | 31 | #include <linux/platform_device.h> |
a524626b | 32 | #include <linux/interrupt.h> |
d533c128 | 33 | #include <linux/irq.h> |
8056c6cb | 34 | #include <linux/i2c.h> |
d94577d5 | 35 | #include <linux/leds.h> |
3bc48014 | 36 | #include <linux/smc91x.h> |
ddba6c7f | 37 | #include <linux/omapfb.h> |
7c38cf02 TL |
38 | #include <linux/mtd/mtd.h> |
39 | #include <linux/mtd/partitions.h> | |
561b036a | 40 | #include <linux/mtd/physmap.h> |
6d16bfb5 | 41 | #include <linux/i2c/tps65010.h> |
4b25408f | 42 | #include <linux/platform_data/gpio-omap.h> |
cc012729 | 43 | #include <linux/platform_data/omap1_bl.h> |
6d16bfb5 | 44 | |
1da177e4 LT |
45 | #include <asm/mach-types.h> |
46 | #include <asm/mach/arch.h> | |
47 | #include <asm/mach/map.h> | |
48 | ||
100f9638 | 49 | #include "flash.h" |
70c494c3 | 50 | #include <mach/mux.h> |
54b693d4 | 51 | #include <mach/tc.h> |
2e3ee9f4 TL |
52 | |
53 | #include <mach/hardware.h> | |
b924b204 | 54 | #include <mach/usb.h> |
2e3ee9f4 | 55 | |
4e65331c | 56 | #include "common.h" |
9b6553cd | 57 | |
3a0110cd TL |
58 | /* At OMAP5912 OSK the Ethernet is directly connected to CS1 */ |
59 | #define OMAP_OSK_ETHR_START 0x04800300 | |
60 | ||
61 | /* TPS65010 has four GPIOs. nPG and LED2 can be treated like GPIOs with | |
62 | * alternate pin configurations for hardware-controlled blinking. | |
63 | */ | |
64 | #define OSK_TPS_GPIO_BASE (OMAP_MAX_GPIO_LINES + 16 /* MPUIO */) | |
65 | # define OSK_TPS_GPIO_USB_PWR_EN (OSK_TPS_GPIO_BASE + 0) | |
66 | # define OSK_TPS_GPIO_LED_D3 (OSK_TPS_GPIO_BASE + 1) | |
67 | # define OSK_TPS_GPIO_LAN_RESET (OSK_TPS_GPIO_BASE + 2) | |
68 | # define OSK_TPS_GPIO_DSP_PWR_EN (OSK_TPS_GPIO_BASE + 3) | |
69 | # define OSK_TPS_GPIO_LED_D9 (OSK_TPS_GPIO_BASE + 4) | |
70 | # define OSK_TPS_GPIO_LED_D2 (OSK_TPS_GPIO_BASE + 5) | |
71 | ||
7c38cf02 TL |
72 | static struct mtd_partition osk_partitions[] = { |
73 | /* bootloader (U-Boot, etc) in first sector */ | |
74 | { | |
75 | .name = "bootloader", | |
76 | .offset = 0, | |
77 | .size = SZ_128K, | |
78 | .mask_flags = MTD_WRITEABLE, /* force read-only */ | |
79 | }, | |
80 | /* bootloader params in the next sector */ | |
81 | { | |
82 | .name = "params", | |
83 | .offset = MTDPART_OFS_APPEND, | |
84 | .size = SZ_128K, | |
85 | .mask_flags = 0, | |
86 | }, { | |
87 | .name = "kernel", | |
88 | .offset = MTDPART_OFS_APPEND, | |
89 | .size = SZ_2M, | |
90 | .mask_flags = 0 | |
91 | }, { | |
92 | .name = "filesystem", | |
93 | .offset = MTDPART_OFS_APPEND, | |
94 | .size = MTDPART_SIZ_FULL, | |
95 | .mask_flags = 0 | |
96 | } | |
1da177e4 LT |
97 | }; |
98 | ||
561b036a | 99 | static struct physmap_flash_data osk_flash_data = { |
7c38cf02 | 100 | .width = 2, |
561b036a | 101 | .set_vpp = omap1_set_vpp, |
7c38cf02 TL |
102 | .parts = osk_partitions, |
103 | .nr_parts = ARRAY_SIZE(osk_partitions), | |
104 | }; | |
105 | ||
106 | static struct resource osk_flash_resource = { | |
107 | /* this is on CS3, wherever it's mapped */ | |
108 | .flags = IORESOURCE_MEM, | |
109 | }; | |
110 | ||
111 | static struct platform_device osk5912_flash_device = { | |
561b036a | 112 | .name = "physmap-flash", |
7c38cf02 TL |
113 | .id = 0, |
114 | .dev = { | |
115 | .platform_data = &osk_flash_data, | |
116 | }, | |
117 | .num_resources = 1, | |
118 | .resource = &osk_flash_resource, | |
119 | }; | |
1da177e4 | 120 | |
3bc48014 LM |
121 | static struct smc91x_platdata osk5912_smc91x_info = { |
122 | .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, | |
123 | .leda = RPC_LED_100_10, | |
124 | .ledb = RPC_LED_TX_RX, | |
125 | }; | |
126 | ||
1da177e4 LT |
127 | static struct resource osk5912_smc91x_resources[] = { |
128 | [0] = { | |
129 | .start = OMAP_OSK_ETHR_START, /* Physical */ | |
130 | .end = OMAP_OSK_ETHR_START + 0xf, | |
131 | .flags = IORESOURCE_MEM, | |
132 | }, | |
133 | [1] = { | |
e7b3dc7e | 134 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, |
1da177e4 LT |
135 | }, |
136 | }; | |
137 | ||
138 | static struct platform_device osk5912_smc91x_device = { | |
139 | .name = "smc91x", | |
140 | .id = -1, | |
3bc48014 LM |
141 | .dev = { |
142 | .platform_data = &osk5912_smc91x_info, | |
143 | }, | |
1da177e4 LT |
144 | .num_resources = ARRAY_SIZE(osk5912_smc91x_resources), |
145 | .resource = osk5912_smc91x_resources, | |
146 | }; | |
147 | ||
148 | static struct resource osk5912_cf_resources[] = { | |
149 | [0] = { | |
1da177e4 LT |
150 | .flags = IORESOURCE_IRQ, |
151 | }, | |
152 | }; | |
153 | ||
154 | static struct platform_device osk5912_cf_device = { | |
155 | .name = "omap_cf", | |
156 | .id = -1, | |
157 | .dev = { | |
158 | .platform_data = (void *) 2 /* CS2 */, | |
159 | }, | |
160 | .num_resources = ARRAY_SIZE(osk5912_cf_resources), | |
161 | .resource = osk5912_cf_resources, | |
162 | }; | |
163 | ||
164 | static struct platform_device *osk5912_devices[] __initdata = { | |
7c38cf02 | 165 | &osk5912_flash_device, |
1da177e4 LT |
166 | &osk5912_smc91x_device, |
167 | &osk5912_cf_device, | |
168 | }; | |
169 | ||
d94577d5 DB |
170 | static struct gpio_led tps_leds[] = { |
171 | /* NOTE: D9 and D2 have hardware blink support. | |
172 | * Also, D9 requires non-battery power. | |
173 | */ | |
5dd81e25 DB |
174 | { .gpio = OSK_TPS_GPIO_LED_D9, .name = "d9", |
175 | .default_trigger = "ide-disk", }, | |
d94577d5 DB |
176 | { .gpio = OSK_TPS_GPIO_LED_D2, .name = "d2", }, |
177 | { .gpio = OSK_TPS_GPIO_LED_D3, .name = "d3", .active_low = 1, | |
178 | .default_trigger = "heartbeat", }, | |
179 | }; | |
180 | ||
181 | static struct gpio_led_platform_data tps_leds_data = { | |
182 | .num_leds = 3, | |
183 | .leds = tps_leds, | |
184 | }; | |
185 | ||
186 | static struct platform_device osk5912_tps_leds = { | |
187 | .name = "leds-gpio", | |
188 | .id = 0, | |
189 | .dev.platform_data = &tps_leds_data, | |
190 | }; | |
191 | ||
192 | static int osk_tps_setup(struct i2c_client *client, void *context) | |
193 | { | |
0b31c53b AB |
194 | if (!IS_BUILTIN(CONFIG_TPS65010)) |
195 | return -ENOSYS; | |
196 | ||
d94577d5 DB |
197 | /* Set GPIO 1 HIGH to disable VBUS power supply; |
198 | * OHCI driver powers it up/down as needed. | |
199 | */ | |
200 | gpio_request(OSK_TPS_GPIO_USB_PWR_EN, "n_vbus_en"); | |
201 | gpio_direction_output(OSK_TPS_GPIO_USB_PWR_EN, 1); | |
202 | ||
203 | /* Set GPIO 2 high so LED D3 is off by default */ | |
204 | tps65010_set_gpio_out_value(GPIO2, HIGH); | |
205 | ||
206 | /* Set GPIO 3 low to take ethernet out of reset */ | |
207 | gpio_request(OSK_TPS_GPIO_LAN_RESET, "smc_reset"); | |
208 | gpio_direction_output(OSK_TPS_GPIO_LAN_RESET, 0); | |
209 | ||
210 | /* GPIO4 is VDD_DSP */ | |
211 | gpio_request(OSK_TPS_GPIO_DSP_PWR_EN, "dsp_power"); | |
212 | gpio_direction_output(OSK_TPS_GPIO_DSP_PWR_EN, 1); | |
213 | /* REVISIT if DSP support isn't configured, power it off ... */ | |
214 | ||
215 | /* Let LED1 (D9) blink; leds-gpio may override it */ | |
216 | tps65010_set_led(LED1, BLINK); | |
217 | ||
218 | /* Set LED2 off by default */ | |
219 | tps65010_set_led(LED2, OFF); | |
220 | ||
221 | /* Enable LOW_PWR handshake */ | |
222 | tps65010_set_low_pwr(ON); | |
223 | ||
224 | /* Switch VLDO2 to 3.0V for AIC23 */ | |
225 | tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V | |
226 | | TPS_LDO1_ENABLE); | |
227 | ||
228 | /* register these three LEDs */ | |
229 | osk5912_tps_leds.dev.parent = &client->dev; | |
230 | platform_device_register(&osk5912_tps_leds); | |
231 | ||
232 | return 0; | |
233 | } | |
234 | ||
235 | static struct tps65010_board tps_board = { | |
236 | .base = OSK_TPS_GPIO_BASE, | |
237 | .outmask = 0x0f, | |
238 | .setup = osk_tps_setup, | |
239 | }; | |
240 | ||
8056c6cb DB |
241 | static struct i2c_board_info __initdata osk_i2c_board_info[] = { |
242 | { | |
243 | I2C_BOARD_INFO("tps65010", 0x48), | |
d94577d5 DB |
244 | .platform_data = &tps_board, |
245 | ||
8056c6cb | 246 | }, |
9b4a3577 AK |
247 | { |
248 | I2C_BOARD_INFO("tlv320aic23", 0x1B), | |
249 | }, | |
8056c6cb | 250 | /* TODO when driver support is ready: |
8056c6cb DB |
251 | * - optionally on Mistral, ov9640 camera sensor at 0x30 |
252 | */ | |
253 | }; | |
254 | ||
1da177e4 LT |
255 | static void __init osk_init_smc91x(void) |
256 | { | |
030b1545 TL |
257 | u32 l; |
258 | ||
ac37a0b0 | 259 | if ((gpio_request(0, "smc_irq")) < 0) { |
1da177e4 LT |
260 | printk("Error requesting gpio 0 for smc91x irq\n"); |
261 | return; | |
262 | } | |
1da177e4 LT |
263 | |
264 | /* Check EMIFS wait states to fix errors with SMC_GET_PKT_HDR */ | |
030b1545 TL |
265 | l = omap_readl(EMIFS_CCS(1)); |
266 | l |= 0x3; | |
267 | omap_writel(l, EMIFS_CCS(1)); | |
1da177e4 LT |
268 | } |
269 | ||
270 | static void __init osk_init_cf(void) | |
271 | { | |
272 | omap_cfg_reg(M7_1610_GPIO62); | |
ac37a0b0 | 273 | if ((gpio_request(62, "cf_irq")) < 0) { |
1da177e4 LT |
274 | printk("Error requesting gpio 62 for CF irq\n"); |
275 | return; | |
276 | } | |
7c38cf02 | 277 | /* the CF I/O IRQ is really active-low */ |
6845664a | 278 | irq_set_irq_type(gpio_to_irq(62), IRQ_TYPE_EDGE_FALLING); |
1da177e4 LT |
279 | } |
280 | ||
1da177e4 LT |
281 | static struct omap_usb_config osk_usb_config __initdata = { |
282 | /* has usb host connector (A) ... for development it can also | |
283 | * be used, with a NONSTANDARD gender-bending cable/dongle, as | |
284 | * a peripheral. | |
285 | */ | |
77c2f02e | 286 | #if IS_ENABLED(CONFIG_USB_OMAP) |
1da177e4 LT |
287 | .register_dev = 1, |
288 | .hmc_mode = 0, | |
289 | #else | |
290 | .register_host = 1, | |
291 | .hmc_mode = 16, | |
292 | .rwc = 1, | |
293 | #endif | |
294 | .pins[0] = 2, | |
295 | }; | |
296 | ||
78762841 | 297 | #ifdef CONFIG_OMAP_OSK_MISTRAL |
3179a019 | 298 | static struct omap_lcd_config osk_lcd_config __initdata = { |
3179a019 TL |
299 | .ctrl_name = "internal", |
300 | }; | |
78762841 | 301 | #endif |
3179a019 | 302 | |
7c38cf02 TL |
303 | #ifdef CONFIG_OMAP_OSK_MISTRAL |
304 | ||
78762841 | 305 | #include <linux/input.h> |
25f73ed5 | 306 | #include <linux/platform_data/at24.h> |
78762841 DB |
307 | #include <linux/spi/spi.h> |
308 | #include <linux/spi/ads7846.h> | |
309 | ||
2203747c | 310 | #include <linux/platform_data/keypad-omap.h> |
78762841 | 311 | |
2430c62e DB |
312 | static struct at24_platform_data at24c04 = { |
313 | .byte_len = SZ_4K / 8, | |
314 | .page_size = 16, | |
315 | }; | |
316 | ||
317 | static struct i2c_board_info __initdata mistral_i2c_board_info[] = { | |
318 | { | |
319 | /* NOTE: powered from LCD supply */ | |
320 | I2C_BOARD_INFO("24c04", 0x50), | |
321 | .platform_data = &at24c04, | |
322 | }, | |
323 | /* TODO when driver support is ready: | |
324 | * - optionally ov9640 camera sensor at 0x30 | |
325 | */ | |
326 | }; | |
327 | ||
da1f026b | 328 | static const unsigned int osk_keymap[] = { |
78762841 DB |
329 | /* KEY(col, row, code) */ |
330 | KEY(0, 0, KEY_F1), /* SW4 */ | |
da1f026b | 331 | KEY(3, 0, KEY_UP), /* (sw2/up) */ |
78762841 | 332 | KEY(1, 1, KEY_LEFTCTRL), /* SW5 */ |
da1f026b JK |
333 | KEY(2, 1, KEY_LEFT), /* (sw2/left) */ |
334 | KEY(0, 2, KEY_SPACE), /* SW3 */ | |
335 | KEY(1, 2, KEY_ESC), /* SW6 */ | |
78762841 | 336 | KEY(2, 2, KEY_DOWN), /* (sw2/down) */ |
da1f026b | 337 | KEY(2, 3, KEY_ENTER), /* (sw2/select) */ |
78762841 | 338 | KEY(3, 3, KEY_RIGHT), /* (sw2/right) */ |
da1f026b JK |
339 | }; |
340 | ||
341 | static const struct matrix_keymap_data osk_keymap_data = { | |
342 | .keymap = osk_keymap, | |
343 | .keymap_size = ARRAY_SIZE(osk_keymap), | |
78762841 DB |
344 | }; |
345 | ||
346 | static struct omap_kp_platform_data osk_kp_data = { | |
4d24607b KS |
347 | .rows = 8, |
348 | .cols = 8, | |
da1f026b | 349 | .keymap_data = &osk_keymap_data, |
4d24607b | 350 | .delay = 9, |
78762841 DB |
351 | }; |
352 | ||
353 | static struct resource osk5912_kp_resources[] = { | |
354 | [0] = { | |
355 | .start = INT_KEYBOARD, | |
356 | .end = INT_KEYBOARD, | |
357 | .flags = IORESOURCE_IRQ, | |
358 | }, | |
359 | }; | |
360 | ||
361 | static struct platform_device osk5912_kp_device = { | |
362 | .name = "omap-keypad", | |
363 | .id = -1, | |
364 | .dev = { | |
365 | .platform_data = &osk_kp_data, | |
366 | }, | |
367 | .num_resources = ARRAY_SIZE(osk5912_kp_resources), | |
368 | .resource = osk5912_kp_resources, | |
369 | }; | |
370 | ||
4dcc6d24 DB |
371 | static struct omap_backlight_config mistral_bl_data = { |
372 | .default_intensity = 0xa0, | |
373 | }; | |
374 | ||
375 | static struct platform_device mistral_bl_device = { | |
376 | .name = "omap-bl", | |
377 | .id = -1, | |
378 | .dev = { | |
379 | .platform_data = &mistral_bl_data, | |
380 | }, | |
381 | }; | |
382 | ||
78762841 DB |
383 | static struct platform_device osk5912_lcd_device = { |
384 | .name = "lcd_osk", | |
385 | .id = -1, | |
386 | }; | |
387 | ||
dafbeadf BW |
388 | static struct gpio_led mistral_gpio_led_pins[] = { |
389 | { | |
390 | .name = "mistral:red", | |
391 | .default_trigger = "heartbeat", | |
392 | .gpio = 3, | |
393 | }, | |
394 | { | |
395 | .name = "mistral:green", | |
396 | .default_trigger = "cpu0", | |
397 | .gpio = OMAP_MPUIO(4), | |
398 | }, | |
399 | }; | |
400 | ||
401 | static struct gpio_led_platform_data mistral_gpio_led_data = { | |
402 | .leds = mistral_gpio_led_pins, | |
403 | .num_leds = ARRAY_SIZE(mistral_gpio_led_pins), | |
404 | }; | |
405 | ||
406 | static struct platform_device mistral_gpio_leds = { | |
407 | .name = "leds-gpio", | |
408 | .id = -1, | |
409 | .dev = { | |
410 | .platform_data = &mistral_gpio_led_data, | |
411 | }, | |
412 | }; | |
413 | ||
78762841 DB |
414 | static struct platform_device *mistral_devices[] __initdata = { |
415 | &osk5912_kp_device, | |
4dcc6d24 | 416 | &mistral_bl_device, |
78762841 | 417 | &osk5912_lcd_device, |
dafbeadf | 418 | &mistral_gpio_leds, |
78762841 DB |
419 | }; |
420 | ||
e8cdf7bd DB |
421 | static int mistral_get_pendown_state(void) |
422 | { | |
ac37a0b0 | 423 | return !gpio_get_value(4); |
e8cdf7bd DB |
424 | } |
425 | ||
78762841 DB |
426 | static const struct ads7846_platform_data mistral_ts_info = { |
427 | .model = 7846, | |
428 | .vref_delay_usecs = 100, /* internal, no capacitor */ | |
429 | .x_plate_ohms = 419, | |
430 | .y_plate_ohms = 486, | |
e8cdf7bd | 431 | .get_pendown_state = mistral_get_pendown_state, |
78762841 DB |
432 | }; |
433 | ||
434 | static struct spi_board_info __initdata mistral_boardinfo[] = { { | |
435 | /* MicroWire (bus 2) CS0 has an ads7846e */ | |
436 | .modalias = "ads7846", | |
437 | .platform_data = &mistral_ts_info, | |
78762841 DB |
438 | .max_speed_hz = 120000 /* max sample rate at 3V */ |
439 | * 26 /* command + data + overhead */, | |
440 | .bus_num = 2, | |
441 | .chip_select = 0, | |
442 | } }; | |
443 | ||
7c38cf02 TL |
444 | #ifdef CONFIG_PM |
445 | static irqreturn_t | |
0cd61b68 | 446 | osk_mistral_wake_interrupt(int irq, void *ignored) |
7c38cf02 TL |
447 | { |
448 | return IRQ_HANDLED; | |
449 | } | |
450 | #endif | |
451 | ||
452 | static void __init osk_mistral_init(void) | |
453 | { | |
78762841 | 454 | /* NOTE: we could actually tell if there's a Mistral board |
7c38cf02 | 455 | * attached, e.g. by trying to read something from the ads7846. |
78762841 DB |
456 | * But this arch_init() code is too early for that, since we |
457 | * can't talk to the ads or even the i2c eeprom. | |
7c38cf02 TL |
458 | */ |
459 | ||
c72d8950 DB |
460 | /* parallel camera interface */ |
461 | omap_cfg_reg(J15_1610_CAM_LCLK); | |
462 | omap_cfg_reg(J18_1610_CAM_D7); | |
463 | omap_cfg_reg(J19_1610_CAM_D6); | |
464 | omap_cfg_reg(J14_1610_CAM_D5); | |
465 | omap_cfg_reg(K18_1610_CAM_D4); | |
466 | omap_cfg_reg(K19_1610_CAM_D3); | |
467 | omap_cfg_reg(K15_1610_CAM_D2); | |
468 | omap_cfg_reg(K14_1610_CAM_D1); | |
469 | omap_cfg_reg(L19_1610_CAM_D0); | |
470 | omap_cfg_reg(L18_1610_CAM_VS); | |
471 | omap_cfg_reg(L15_1610_CAM_HS); | |
472 | omap_cfg_reg(M19_1610_CAM_RSTZ); | |
473 | omap_cfg_reg(Y15_1610_CAM_OUTCLK); | |
474 | ||
475 | /* serial camera interface */ | |
476 | omap_cfg_reg(H19_1610_CAM_EXCLK); | |
477 | omap_cfg_reg(W13_1610_CCP_CLKM); | |
478 | omap_cfg_reg(Y12_1610_CCP_CLKP); | |
479 | /* CCP_DATAM CONFLICTS WITH UART1.TX (and serial console) */ | |
6e2d4107 | 480 | /* omap_cfg_reg(Y14_1610_CCP_DATAM); */ |
c72d8950 DB |
481 | omap_cfg_reg(W14_1610_CCP_DATAP); |
482 | ||
483 | /* CAM_PWDN */ | |
ac37a0b0 | 484 | if (gpio_request(11, "cam_pwdn") == 0) { |
c72d8950 | 485 | omap_cfg_reg(N20_1610_GPIO11); |
ac37a0b0 | 486 | gpio_direction_output(11, 0); |
c72d8950 DB |
487 | } else |
488 | pr_debug("OSK+Mistral: CAM_PWDN is awol\n"); | |
489 | ||
490 | ||
6e2d4107 | 491 | /* omap_cfg_reg(P19_1610_GPIO6); */ /* BUSY */ |
ac37a0b0 DB |
492 | gpio_request(6, "ts_busy"); |
493 | gpio_direction_input(6); | |
494 | ||
6e2d4107 | 495 | omap_cfg_reg(P20_1610_GPIO4); /* PENIRQ */ |
ac37a0b0 DB |
496 | gpio_request(4, "ts_int"); |
497 | gpio_direction_input(4); | |
6845664a | 498 | irq_set_irq_type(gpio_to_irq(4), IRQ_TYPE_EDGE_FALLING); |
ac37a0b0 | 499 | |
46a0a540 | 500 | mistral_boardinfo[0].irq = gpio_to_irq(4); |
78762841 DB |
501 | spi_register_board_info(mistral_boardinfo, |
502 | ARRAY_SIZE(mistral_boardinfo)); | |
503 | ||
2430c62e DB |
504 | /* the sideways button (SW1) is for use as a "wakeup" button |
505 | * | |
506 | * NOTE: The Mistral board has the wakeup button (SW1) wired | |
507 | * to the LCD 3.3V rail, which is powered down during suspend. | |
508 | * To allow this button to wake up the omap, work around this | |
509 | * HW bug by rewiring SW1 to use the main 3.3V rail. | |
510 | */ | |
7c38cf02 | 511 | omap_cfg_reg(N15_1610_MPUIO2); |
ac37a0b0 | 512 | if (gpio_request(OMAP_MPUIO(2), "wakeup") == 0) { |
7c38cf02 | 513 | int ret = 0; |
15f74b03 | 514 | int irq = gpio_to_irq(OMAP_MPUIO(2)); |
ac37a0b0 DB |
515 | |
516 | gpio_direction_input(OMAP_MPUIO(2)); | |
6845664a | 517 | irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING); |
7c38cf02 TL |
518 | #ifdef CONFIG_PM |
519 | /* share the IRQ in case someone wants to use the | |
520 | * button for more than wakeup from system sleep. | |
521 | */ | |
15f74b03 | 522 | ret = request_irq(irq, |
7c38cf02 | 523 | &osk_mistral_wake_interrupt, |
52e405ea | 524 | IRQF_SHARED, "mistral_wakeup", |
7c38cf02 TL |
525 | &osk_mistral_wake_interrupt); |
526 | if (ret != 0) { | |
ac37a0b0 | 527 | gpio_free(OMAP_MPUIO(2)); |
7c38cf02 TL |
528 | printk(KERN_ERR "OSK+Mistral: no wakeup irq, %d?\n", |
529 | ret); | |
530 | } else | |
15f74b03 | 531 | enable_irq_wake(irq); |
7c38cf02 TL |
532 | #endif |
533 | } else | |
534 | printk(KERN_ERR "OSK+Mistral: wakeup button is awol\n"); | |
78762841 | 535 | |
4dcc6d24 DB |
536 | /* LCD: backlight, and power; power controls other devices on the |
537 | * board, like the touchscreen, EEPROM, and wakeup (!) switch. | |
538 | */ | |
539 | omap_cfg_reg(PWL); | |
ac37a0b0 DB |
540 | if (gpio_request(2, "lcd_pwr") == 0) |
541 | gpio_direction_output(2, 1); | |
4dcc6d24 | 542 | |
dafbeadf BW |
543 | /* |
544 | * GPIO based LEDs | |
545 | */ | |
546 | omap_cfg_reg(P18_1610_GPIO3); | |
547 | omap_cfg_reg(MPUIO4); | |
548 | ||
2430c62e DB |
549 | i2c_register_board_info(1, mistral_i2c_board_info, |
550 | ARRAY_SIZE(mistral_i2c_board_info)); | |
551 | ||
78762841 | 552 | platform_add_devices(mistral_devices, ARRAY_SIZE(mistral_devices)); |
7c38cf02 TL |
553 | } |
554 | #else | |
555 | static void __init osk_mistral_init(void) { } | |
556 | #endif | |
557 | ||
9b6553cd TL |
558 | #define EMIFS_CS3_VAL (0x88013141) |
559 | ||
1da177e4 LT |
560 | static void __init osk_init(void) |
561 | { | |
030b1545 TL |
562 | u32 l; |
563 | ||
c2cdaffe TL |
564 | osk_init_smc91x(); |
565 | osk_init_cf(); | |
566 | ||
9b6553cd TL |
567 | /* Workaround for wrong CS3 (NOR flash) timing |
568 | * There are some U-Boot versions out there which configure | |
569 | * wrong CS3 memory timings. This mainly leads to CRC | |
6cbdc8c5 | 570 | * or similar errors if you use NOR flash (e.g. with JFFS2) |
9b6553cd | 571 | */ |
030b1545 TL |
572 | l = omap_readl(EMIFS_CCS(3)); |
573 | if (l != EMIFS_CS3_VAL) | |
574 | omap_writel(EMIFS_CS3_VAL, EMIFS_CCS(3)); | |
9b6553cd | 575 | |
7c38cf02 TL |
576 | osk_flash_resource.end = osk_flash_resource.start = omap_cs3_phys(); |
577 | osk_flash_resource.end += SZ_32M - 1; | |
46a0a540 TKD |
578 | osk5912_smc91x_resources[1].start = gpio_to_irq(0); |
579 | osk5912_smc91x_resources[1].end = gpio_to_irq(0); | |
580 | osk5912_cf_resources[0].start = gpio_to_irq(62); | |
581 | osk5912_cf_resources[0].end = gpio_to_irq(62); | |
1da177e4 | 582 | platform_add_devices(osk5912_devices, ARRAY_SIZE(osk5912_devices)); |
f35ae634 TL |
583 | |
584 | l = omap_readl(USB_TRANSCEIVER_CTRL); | |
585 | l |= (3 << 1); | |
586 | omap_writel(l, USB_TRANSCEIVER_CTRL); | |
7c38cf02 | 587 | |
dd0cdd88 | 588 | omap1_usb_init(&osk_usb_config); |
b0b5aa3f | 589 | |
8056c6cb DB |
590 | /* irq for tps65010 chip */ |
591 | /* bootloader effectively does: omap_cfg_reg(U19_1610_MPUIO1); */ | |
592 | if (gpio_request(OMAP_MPUIO(1), "tps65010") == 0) | |
593 | gpio_direction_input(OMAP_MPUIO(1)); | |
594 | ||
3179a019 | 595 | omap_serial_init(); |
46a0a540 | 596 | osk_i2c_board_info[0].irq = gpio_to_irq(OMAP_MPUIO(1)); |
1ed16a86 JN |
597 | omap_register_i2c_bus(1, 400, osk_i2c_board_info, |
598 | ARRAY_SIZE(osk_i2c_board_info)); | |
7c38cf02 | 599 | osk_mistral_init(); |
ddba6c7f TV |
600 | |
601 | #ifdef CONFIG_OMAP_OSK_MISTRAL | |
602 | omapfb_set_lcd_config(&osk_lcd_config); | |
603 | #endif | |
604 | ||
1da177e4 LT |
605 | } |
606 | ||
1da177e4 | 607 | MACHINE_START(OMAP_OSK, "TI-OSK") |
e9dea0c6 | 608 | /* Maintainer: Dirk Behme <dirk.behme@de.bosch.com> */ |
246e389d | 609 | .atag_offset = 0x100, |
7b88e62f TL |
610 | .map_io = omap16xx_map_io, |
611 | .init_early = omap1_init_early, | |
7b88e62f | 612 | .init_irq = omap1_init_irq, |
b694331c | 613 | .handle_irq = omap1_handle_irq, |
e9dea0c6 | 614 | .init_machine = osk_init, |
82c3bd03 | 615 | .init_late = omap1_init_late, |
6bb27d73 | 616 | .init_time = omap1_timer_init, |
baa95883 | 617 | .restart = omap1_restart, |
1da177e4 | 618 | MACHINE_END |