[deliverable/linux.git] / arch / arm / mach-omap1 / board-osk.c

/*
 * linux/arch/arm/mach-omap1/board-osk.c
 *
 * Board specific init for OMAP5912 OSK
 *
 * Written by Dirk Behme <dirk.behme@de.bosch.com>
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the
 * Free Software Foundation; either version 2 of the License, or (at your
 * option) any later version.
 *
 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
 * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 * You should have received a copy of the  GNU General Public License along
 * with this program; if not, write  to the Free Software Foundation, Inc.,
 * 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/interrupt.h>

#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>

#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/flash.h>

#include <asm/arch/gpio.h>
#include <asm/arch/usb.h>
#include <asm/arch/mux.h>
#include <asm/arch/tc.h>
#include <asm/arch/common.h>
#include <asm/arch/mcbsp.h>
#include <asm/arch/omap-alsa.h>

static struct mtd_partition osk_partitions[] = {
	/* bootloader (U-Boot, etc) in first sector */
	{
	      .name		= "bootloader",
	      .offset		= 0,
	      .size		= SZ_128K,
	      .mask_flags	= MTD_WRITEABLE, /* force read-only */
	},
	/* bootloader params in the next sector */
	{
	      .name		= "params",
	      .offset		= MTDPART_OFS_APPEND,
	      .size		= SZ_128K,
	      .mask_flags	= 0,
	}, {
	      .name		= "kernel",
	      .offset		= MTDPART_OFS_APPEND,
	      .size		= SZ_2M,
	      .mask_flags	= 0
	}, {
	      .name		= "filesystem",
	      .offset		= MTDPART_OFS_APPEND,
	      .size		= MTDPART_SIZ_FULL,
	      .mask_flags	= 0
	}
};

static struct flash_platform_data osk_flash_data = {
	.map_name	= "cfi_probe",
	.width		= 2,
	.parts		= osk_partitions,
	.nr_parts	= ARRAY_SIZE(osk_partitions),
};

static struct resource osk_flash_resource = {
	/* this is on CS3, wherever it's mapped */
	.flags		= IORESOURCE_MEM,
};

static struct platform_device osk5912_flash_device = {
	.name		= "omapflash",
	.id		= 0,
	.dev		= {
		.platform_data	= &osk_flash_data,
	},
	.num_resources	= 1,
	.resource	= &osk_flash_resource,
};

static struct resource osk5912_smc91x_resources[] = {
	[0] = {
		.start	= OMAP_OSK_ETHR_START,		/* Physical */
		.end	= OMAP_OSK_ETHR_START + 0xf,
		.flags	= IORESOURCE_MEM,
	},
	[1] = {
		.start	= OMAP_GPIO_IRQ(0),
		.end	= OMAP_GPIO_IRQ(0),
		.flags	= IORESOURCE_IRQ,
	},
};

static struct platform_device osk5912_smc91x_device = {
	.name		= "smc91x",
	.id		= -1,
	.num_resources	= ARRAY_SIZE(osk5912_smc91x_resources),
	.resource	= osk5912_smc91x_resources,
};

static struct resource osk5912_cf_resources[] = {
	[0] = {
		.start	= OMAP_GPIO_IRQ(62),
		.end	= OMAP_GPIO_IRQ(62),
		.flags	= IORESOURCE_IRQ,
	},
};

static struct platform_device osk5912_cf_device = {
	.name		= "omap_cf",
	.id		= -1,
	.dev = {
		.platform_data	= (void *) 2 /* CS2 */,
	},
	.num_resources	= ARRAY_SIZE(osk5912_cf_resources),
	.resource	= osk5912_cf_resources,
};

#define DEFAULT_BITPERSAMPLE 16

static struct omap_mcbsp_reg_cfg mcbsp_regs = {
	.spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
	.spcr1 = RINTM(3) | RRST,
	.rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
	    RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
	.rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
	.xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
	    XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
	.xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
	.srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
	.srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
	/*.pcr0 = FSXM | FSRM | CLKXM | CLKRM | CLKXP | CLKRP,*/ /* mcbsp: master */
	.pcr0 = CLKXP | CLKRP,  /* mcbsp: slave */
};

static struct omap_alsa_codec_config alsa_config = {
	.name			= "OSK AIC23",
	.mcbsp_regs_alsa	= &mcbsp_regs,
	.codec_configure_dev	= NULL, // aic23_configure,
	.codec_set_samplerate	= NULL, // aic23_set_samplerate,
	.codec_clock_setup	= NULL, // aic23_clock_setup,
	.codec_clock_on		= NULL, // aic23_clock_on,
	.codec_clock_off	= NULL, // aic23_clock_off,
	.get_default_samplerate	= NULL, // aic23_get_default_samplerate,
};

static struct platform_device osk5912_mcbsp1_device = {
	.name	= "omap_alsa_mcbsp",
	.id	= 1,
	.dev = {
		.platform_data	= &alsa_config,
	},
};

static struct platform_device *osk5912_devices[] __initdata = {
	&osk5912_flash_device,
	&osk5912_smc91x_device,
	&osk5912_cf_device,
	&osk5912_mcbsp1_device,
};

static void __init osk_init_smc91x(void)
{
	if ((omap_request_gpio(0)) < 0) {
		printk("Error requesting gpio 0 for smc91x irq\n");
		return;
	}

	/* Check EMIFS wait states to fix errors with SMC_GET_PKT_HDR */
	EMIFS_CCS(1) |= 0x3;
}

static void __init osk_init_cf(void)
{
	omap_cfg_reg(M7_1610_GPIO62);
	if ((omap_request_gpio(62)) < 0) {
		printk("Error requesting gpio 62 for CF irq\n");
		return;
	}
	/* the CF I/O IRQ is really active-low */
	set_irq_type(OMAP_GPIO_IRQ(62), IRQT_FALLING);
}

static void __init osk_init_irq(void)
{
	omap1_init_common_hw();
	omap_init_irq();
	omap_gpio_init();
	osk_init_smc91x();
	osk_init_cf();
}

static struct omap_usb_config osk_usb_config __initdata = {
	/* has usb host connector (A) ... for development it can also
	 * be used, with a NONSTANDARD gender-bending cable/dongle, as
	 * a peripheral.
	 */
#ifdef	CONFIG_USB_GADGET_OMAP
	.register_dev	= 1,
	.hmc_mode	= 0,
#else
	.register_host	= 1,
	.hmc_mode	= 16,
	.rwc		= 1,
#endif
	.pins[0]	= 2,
};

static struct omap_uart_config osk_uart_config __initdata = {
	.enabled_uarts = (1 << 0),
};

#ifdef	CONFIG_OMAP_OSK_MISTRAL
static struct omap_lcd_config osk_lcd_config __initdata = {
	.ctrl_name	= "internal",
};
#endif

static struct omap_board_config_kernel osk_config[] = {
	{ OMAP_TAG_USB,           &osk_usb_config },
	{ OMAP_TAG_UART,		&osk_uart_config },
#ifdef	CONFIG_OMAP_OSK_MISTRAL
	{ OMAP_TAG_LCD,			&osk_lcd_config },
#endif
};

#ifdef	CONFIG_OMAP_OSK_MISTRAL

#include <linux/input.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>

#include <asm/arch/keypad.h>

static const int osk_keymap[] = {
	/* KEY(col, row, code) */
	KEY(0, 0, KEY_F1),		/* SW4 */
	KEY(0, 3, KEY_UP),		/* (sw2/up) */
	KEY(1, 1, KEY_LEFTCTRL),	/* SW5 */
	KEY(1, 2, KEY_LEFT),		/* (sw2/left) */
	KEY(2, 0, KEY_SPACE),		/* SW3 */
	KEY(2, 1, KEY_ESC),		/* SW6 */
	KEY(2, 2, KEY_DOWN),		/* (sw2/down) */
	KEY(3, 2, KEY_ENTER),		/* (sw2/select) */
	KEY(3, 3, KEY_RIGHT),		/* (sw2/right) */
	0
};

static struct omap_kp_platform_data osk_kp_data = {
	.rows		= 8,
	.cols		= 8,
	.keymap		= (int *) osk_keymap,
	.keymapsize	= ARRAY_SIZE(osk_keymap),
	.delay		= 9,
};

static struct resource osk5912_kp_resources[] = {
	[0] = {
		.start	= INT_KEYBOARD,
		.end	= INT_KEYBOARD,
		.flags	= IORESOURCE_IRQ,
	},
};

static struct platform_device osk5912_kp_device = {
	.name		= "omap-keypad",
	.id		= -1,
	.dev		= {
		.platform_data = &osk_kp_data,
	},
	.num_resources	= ARRAY_SIZE(osk5912_kp_resources),
	.resource	= osk5912_kp_resources,
};

static struct omap_backlight_config mistral_bl_data = {
	.default_intensity	= 0xa0,
};

static struct platform_device mistral_bl_device = {
	.name		= "omap-bl",
	.id		= -1,
	.dev		= {
		.platform_data = &mistral_bl_data,
	},
};

static struct platform_device osk5912_lcd_device = {
	.name		= "lcd_osk",
	.id		= -1,
};

static struct platform_device *mistral_devices[] __initdata = {
	&osk5912_kp_device,
	&mistral_bl_device,
	&osk5912_lcd_device,
};

static int mistral_get_pendown_state(void)
{
	return !omap_get_gpio_datain(4);
}

static const struct ads7846_platform_data mistral_ts_info = {
	.model			= 7846,
	.vref_delay_usecs	= 100,	/* internal, no capacitor */
	.x_plate_ohms		= 419,
	.y_plate_ohms		= 486,
	.get_pendown_state	= mistral_get_pendown_state,
};

static struct spi_board_info __initdata mistral_boardinfo[] = { {
	/* MicroWire (bus 2) CS0 has an ads7846e */
	.modalias		= "ads7846",
	.platform_data		= &mistral_ts_info,
	.irq			= OMAP_GPIO_IRQ(4),
	.max_speed_hz		= 120000 /* max sample rate at 3V */
					* 26 /* command + data + overhead */,
	.bus_num		= 2,
	.chip_select		= 0,
} };

#ifdef	CONFIG_PM
static irqreturn_t
osk_mistral_wake_interrupt(int irq, void *ignored)
{
	return IRQ_HANDLED;
}
#endif

static void __init osk_mistral_init(void)
{
	/* NOTE:  we could actually tell if there's a Mistral board
	 * attached, e.g. by trying to read something from the ads7846.
	 * But this arch_init() code is too early for that, since we
	 * can't talk to the ads or even the i2c eeprom.
	 */

	/* parallel camera interface */
	omap_cfg_reg(J15_1610_CAM_LCLK);
	omap_cfg_reg(J18_1610_CAM_D7);
	omap_cfg_reg(J19_1610_CAM_D6);
	omap_cfg_reg(J14_1610_CAM_D5);
	omap_cfg_reg(K18_1610_CAM_D4);
	omap_cfg_reg(K19_1610_CAM_D3);
	omap_cfg_reg(K15_1610_CAM_D2);
	omap_cfg_reg(K14_1610_CAM_D1);
	omap_cfg_reg(L19_1610_CAM_D0);
	omap_cfg_reg(L18_1610_CAM_VS);
	omap_cfg_reg(L15_1610_CAM_HS);
	omap_cfg_reg(M19_1610_CAM_RSTZ);
	omap_cfg_reg(Y15_1610_CAM_OUTCLK);

	/* serial camera interface */
	omap_cfg_reg(H19_1610_CAM_EXCLK);
	omap_cfg_reg(W13_1610_CCP_CLKM);
	omap_cfg_reg(Y12_1610_CCP_CLKP);
	/* CCP_DATAM CONFLICTS WITH UART1.TX (and serial console) */
	// omap_cfg_reg(Y14_1610_CCP_DATAM);
	omap_cfg_reg(W14_1610_CCP_DATAP);

	/* CAM_PWDN */
	if (omap_request_gpio(11) == 0) {
		omap_cfg_reg(N20_1610_GPIO11);
		omap_set_gpio_direction(11, 0 /* out */);
		omap_set_gpio_dataout(11, 0 /* off */);
	} else
		pr_debug("OSK+Mistral: CAM_PWDN is awol\n");


	// omap_cfg_reg(P19_1610_GPIO6);	// BUSY
	omap_cfg_reg(P20_1610_GPIO4);	// PENIRQ
	set_irq_type(OMAP_GPIO_IRQ(4), IRQT_FALLING);
	spi_register_board_info(mistral_boardinfo,
			ARRAY_SIZE(mistral_boardinfo));

	/* the sideways button (SW1) is for use as a "wakeup" button */
	omap_cfg_reg(N15_1610_MPUIO2);
	if (omap_request_gpio(OMAP_MPUIO(2)) == 0) {
		int ret = 0;
		omap_set_gpio_direction(OMAP_MPUIO(2), 1);
		set_irq_type(OMAP_GPIO_IRQ(OMAP_MPUIO(2)), IRQT_RISING);
#ifdef	CONFIG_PM
		/* share the IRQ in case someone wants to use the
		 * button for more than wakeup from system sleep.
		 */
		ret = request_irq(OMAP_GPIO_IRQ(OMAP_MPUIO(2)),
				&osk_mistral_wake_interrupt,
				IRQF_SHARED, "mistral_wakeup",
				&osk_mistral_wake_interrupt);
		if (ret != 0) {
			omap_free_gpio(OMAP_MPUIO(2));
			printk(KERN_ERR "OSK+Mistral: no wakeup irq, %d?\n",
				ret);
		} else
			enable_irq_wake(OMAP_GPIO_IRQ(OMAP_MPUIO(2)));
#endif
	} else
		printk(KERN_ERR "OSK+Mistral: wakeup button is awol\n");

	/* LCD:  backlight, and power; power controls other devices on the
	 * board, like the touchscreen, EEPROM, and wakeup (!) switch.
	 */
	omap_cfg_reg(PWL);
	if (omap_request_gpio(2) == 0) {
		omap_set_gpio_direction(2, 0 /* out */);
		omap_set_gpio_dataout(2, 1 /* on */);
	}

	platform_add_devices(mistral_devices, ARRAY_SIZE(mistral_devices));
}
#else
static void __init osk_mistral_init(void) { }
#endif

#define EMIFS_CS3_VAL	(0x88013141)

static void __init osk_init(void)
{
	/* Workaround for wrong CS3 (NOR flash) timing
	 * There are some U-Boot versions out there which configure
	 * wrong CS3 memory timings. This mainly leads to CRC
	 * or similar errors if you use NOR flash (e.g. with JFFS2)
	 */
	if (EMIFS_CCS(3) != EMIFS_CS3_VAL)
		EMIFS_CCS(3) = EMIFS_CS3_VAL;

	osk_flash_resource.end = osk_flash_resource.start = omap_cs3_phys();
	osk_flash_resource.end += SZ_32M - 1;
	platform_add_devices(osk5912_devices, ARRAY_SIZE(osk5912_devices));
	omap_board_config = osk_config;
	omap_board_config_size = ARRAY_SIZE(osk_config);
	USB_TRANSCEIVER_CTRL_REG |= (3 << 1);

	omap_serial_init();
	osk_mistral_init();
}

static void __init osk_map_io(void)
{
	omap1_map_common_io();
}

MACHINE_START(OMAP_OSK, "TI-OSK")
	/* Maintainer: Dirk Behme <dirk.behme@de.bosch.com> */
	.phys_io	= 0xfff00000,
	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
	.boot_params	= 0x10000100,
	.map_io		= osk_map_io,
	.init_irq	= osk_init_irq,
	.init_machine	= osk_init,
	.timer		= &omap_timer,
MACHINE_END
Commit	Line	Data
1da177e4	1	/*
dbdf9ced	2	* linux/arch/arm/mach-omap1/board-osk.c
1da177e4 LT	3	*
	4	* Board specific init for OMAP5912 OSK
	5	*
	6	* Written by Dirk Behme <dirk.behme@de.bosch.com>
	7	*
	8	* This program is free software; you can redistribute it and/or modify it
	9	* under the terms of the GNU General Public License as published by the
	10	* Free Software Foundation; either version 2 of the License, or (at your
	11	* option) any later version.
	12	*
	13	* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
	14	* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
	15	* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
	16	* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
	17	* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
	18	* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
	19	* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
	20	* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	21	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
	22	* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	23	*
	24	* You should have received a copy of the GNU General Public License along
	25	* with this program; if not, write to the Free Software Foundation, Inc.,
	26	* 675 Mass Ave, Cambridge, MA 02139, USA.
	27	*/
	28
	29	#include <linux/kernel.h>
	30	#include <linux/init.h>
d052d1be	31	#include <linux/platform_device.h>
a524626b	32	#include <linux/interrupt.h>
d533c128	33	#include <linux/irq.h>
ffd22b8e	34	#include <linux/interrupt.h>
7c38cf02 TL	35
	36	#include <linux/mtd/mtd.h>
	37	#include <linux/mtd/partitions.h>
1da177e4 LT	38
	39	#include <asm/hardware.h>
	40	#include <asm/mach-types.h>
	41	#include <asm/mach/arch.h>
	42	#include <asm/mach/map.h>
7c38cf02	43	#include <asm/mach/flash.h>
1da177e4 LT	44
	45	#include <asm/arch/gpio.h>
	46	#include <asm/arch/usb.h>
	47	#include <asm/arch/mux.h>
	48	#include <asm/arch/tc.h>
d48af15e	49	#include <asm/arch/common.h>
9b6553cd TL	50	#include <asm/arch/mcbsp.h>
	51	#include <asm/arch/omap-alsa.h>
	52
7c38cf02 TL	53	static struct mtd_partition osk_partitions[] = {
	54	/* bootloader (U-Boot, etc) in first sector */
	55	{
	56	.name = "bootloader",
	57	.offset = 0,
	58	.size = SZ_128K,
	59	.mask_flags = MTD_WRITEABLE, /* force read-only */
	60	},
	61	/* bootloader params in the next sector */
	62	{
	63	.name = "params",
	64	.offset = MTDPART_OFS_APPEND,
	65	.size = SZ_128K,
	66	.mask_flags = 0,
	67	}, {
	68	.name = "kernel",
	69	.offset = MTDPART_OFS_APPEND,
	70	.size = SZ_2M,
	71	.mask_flags = 0
	72	}, {
	73	.name = "filesystem",
	74	.offset = MTDPART_OFS_APPEND,
	75	.size = MTDPART_SIZ_FULL,
	76	.mask_flags = 0
	77	}
1da177e4 LT	78	};
1da177e4 LT	79
7c38cf02 TL	80	static struct flash_platform_data osk_flash_data = {
	81	.map_name = "cfi_probe",
	82	.width = 2,
	83	.parts = osk_partitions,
	84	.nr_parts = ARRAY_SIZE(osk_partitions),
	85	};
	86
	87	static struct resource osk_flash_resource = {
	88	/* this is on CS3, wherever it's mapped */
	89	.flags = IORESOURCE_MEM,
	90	};
	91
	92	static struct platform_device osk5912_flash_device = {
	93	.name = "omapflash",
	94	.id = 0,
	95	.dev = {
	96	.platform_data = &osk_flash_data,
	97	},
	98	.num_resources = 1,
	99	.resource = &osk_flash_resource,
	100	};
1da177e4 LT	101
	102	static struct resource osk5912_smc91x_resources[] = {
	103	[0] = {
	104	.start = OMAP_OSK_ETHR_START, /* Physical */
	105	.end = OMAP_OSK_ETHR_START + 0xf,
	106	.flags = IORESOURCE_MEM,
	107	},
	108	[1] = {
	109	.start = OMAP_GPIO_IRQ(0),
	110	.end = OMAP_GPIO_IRQ(0),
	111	.flags = IORESOURCE_IRQ,
	112	},
	113	};
	114
	115	static struct platform_device osk5912_smc91x_device = {
	116	.name = "smc91x",
	117	.id = -1,
	118	.num_resources = ARRAY_SIZE(osk5912_smc91x_resources),
	119	.resource = osk5912_smc91x_resources,
	120	};
	121
	122	static struct resource osk5912_cf_resources[] = {
	123	[0] = {
	124	.start = OMAP_GPIO_IRQ(62),
	125	.end = OMAP_GPIO_IRQ(62),
	126	.flags = IORESOURCE_IRQ,
	127	},
	128	};
	129
	130	static struct platform_device osk5912_cf_device = {
	131	.name = "omap_cf",
	132	.id = -1,
	133	.dev = {
	134	.platform_data = (void ) 2 / CS2 */,
	135	},
	136	.num_resources = ARRAY_SIZE(osk5912_cf_resources),
	137	.resource = osk5912_cf_resources,
	138	};
	139
9b6553cd TL	140	#define DEFAULT_BITPERSAMPLE 16
	141
	142	static struct omap_mcbsp_reg_cfg mcbsp_regs = {
	143	.spcr2 = FREE \| FRST \| GRST \| XRST \| XINTM(3),
	144	.spcr1 = RINTM(3) \| RRST,
	145	.rcr2 = RPHASE \| RFRLEN2(OMAP_MCBSP_WORD_8) \|
	146	RWDLEN2(OMAP_MCBSP_WORD_16) \| RDATDLY(0),
	147	.rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) \| RWDLEN1(OMAP_MCBSP_WORD_16),
	148	.xcr2 = XPHASE \| XFRLEN2(OMAP_MCBSP_WORD_8) \|
	149	XWDLEN2(OMAP_MCBSP_WORD_16) \| XDATDLY(0) \| XFIG,
	150	.xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) \| XWDLEN1(OMAP_MCBSP_WORD_16),
	151	.srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
	152	.srgr2 = GSYNC \| CLKSP \| FSGM \| FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
	153	/.pcr0 = FSXM \| FSRM \| CLKXM \| CLKRM \| CLKXP \| CLKRP,/ /* mcbsp: master */
	154	.pcr0 = CLKXP \| CLKRP, /* mcbsp: slave */
	155	};
	156
	157	static struct omap_alsa_codec_config alsa_config = {
	158	.name = "OSK AIC23",
	159	.mcbsp_regs_alsa = &mcbsp_regs,
	160	.codec_configure_dev = NULL, // aic23_configure,
	161	.codec_set_samplerate = NULL, // aic23_set_samplerate,
	162	.codec_clock_setup = NULL, // aic23_clock_setup,
	163	.codec_clock_on = NULL, // aic23_clock_on,
	164	.codec_clock_off = NULL, // aic23_clock_off,
	165	.get_default_samplerate = NULL, // aic23_get_default_samplerate,
	166	};
	167
7c38cf02	168	static struct platform_device osk5912_mcbsp1_device = {
9b6553cd	169	.name = "omap_alsa_mcbsp",
78762841	170	.id = 1,
9b6553cd TL	171	.dev = {
	172	.platform_data = &alsa_config,
	173	},
	174	};
	175
1da177e4	176	static struct platform_device *osk5912_devices[] __initdata = {
7c38cf02	177	&osk5912_flash_device,
1da177e4 LT	178	&osk5912_smc91x_device,
1da177e4 LT	179	&osk5912_cf_device,
7c38cf02	180	&osk5912_mcbsp1_device,
1da177e4 LT	181	};
	182
	183	static void __init osk_init_smc91x(void)
	184	{
	185	if ((omap_request_gpio(0)) < 0) {
	186	printk("Error requesting gpio 0 for smc91x irq\n");
	187	return;
	188	}
1da177e4 LT	189
1da177e4 LT	190	/* Check EMIFS wait states to fix errors with SMC_GET_PKT_HDR */
3179a019	191	EMIFS_CCS(1) \|= 0x3;
1da177e4 LT	192	}
	193
	194	static void __init osk_init_cf(void)
	195	{
	196	omap_cfg_reg(M7_1610_GPIO62);
	197	if ((omap_request_gpio(62)) < 0) {
	198	printk("Error requesting gpio 62 for CF irq\n");
	199	return;
	200	}
7c38cf02 TL	201	/* the CF I/O IRQ is really active-low */
7c38cf02 TL	202	set_irq_type(OMAP_GPIO_IRQ(62), IRQT_FALLING);
1da177e4 LT	203	}
1da177e4 LT	204
7c38cf02	205	static void __init osk_init_irq(void)
1da177e4	206	{
87bd63f6	207	omap1_init_common_hw();
1da177e4 LT	208	omap_init_irq();
	209	omap_gpio_init();
	210	osk_init_smc91x();
	211	osk_init_cf();
	212	}
	213
	214	static struct omap_usb_config osk_usb_config __initdata = {
	215	/* has usb host connector (A) ... for development it can also
	216	* be used, with a NONSTANDARD gender-bending cable/dongle, as
	217	* a peripheral.
	218	*/
	219	#ifdef CONFIG_USB_GADGET_OMAP
	220	.register_dev = 1,
	221	.hmc_mode = 0,
	222	#else
	223	.register_host = 1,
	224	.hmc_mode = 16,
	225	.rwc = 1,
	226	#endif
	227	.pins[0] = 2,
	228	};
	229
3179a019 TL	230	static struct omap_uart_config osk_uart_config __initdata = {
	231	.enabled_uarts = (1 << 0),
	232	};
	233
78762841	234	#ifdef CONFIG_OMAP_OSK_MISTRAL
3179a019	235	static struct omap_lcd_config osk_lcd_config __initdata = {
3179a019 TL	236	.ctrl_name = "internal",
3179a019 TL	237	};
78762841	238	#endif
3179a019	239
1da177e4 LT	240	static struct omap_board_config_kernel osk_config[] = {
1da177e4 LT	241	{ OMAP_TAG_USB, &osk_usb_config },
3179a019	242	{ OMAP_TAG_UART, &osk_uart_config },
78762841	243	#ifdef CONFIG_OMAP_OSK_MISTRAL
3179a019	244	{ OMAP_TAG_LCD, &osk_lcd_config },
78762841	245	#endif
1da177e4 LT	246	};
1da177e4 LT	247
7c38cf02 TL	248	#ifdef CONFIG_OMAP_OSK_MISTRAL
7c38cf02 TL	249
78762841 DB	250	#include <linux/input.h>
	251	#include <linux/spi/spi.h>
	252	#include <linux/spi/ads7846.h>
	253
	254	#include <asm/arch/keypad.h>
	255
	256	static const int osk_keymap[] = {
	257	/* KEY(col, row, code) */
	258	KEY(0, 0, KEY_F1), /* SW4 */
	259	KEY(0, 3, KEY_UP), /* (sw2/up) */
	260	KEY(1, 1, KEY_LEFTCTRL), /* SW5 */
	261	KEY(1, 2, KEY_LEFT), /* (sw2/left) */
	262	KEY(2, 0, KEY_SPACE), /* SW3 */
	263	KEY(2, 1, KEY_ESC), /* SW6 */
	264	KEY(2, 2, KEY_DOWN), /* (sw2/down) */
	265	KEY(3, 2, KEY_ENTER), /* (sw2/select) */
	266	KEY(3, 3, KEY_RIGHT), /* (sw2/right) */
	267	0
	268	};
	269
	270	static struct omap_kp_platform_data osk_kp_data = {
4d24607b KS	271	.rows = 8,
	272	.cols = 8,
	273	.keymap = (int *) osk_keymap,
	274	.keymapsize = ARRAY_SIZE(osk_keymap),
	275	.delay = 9,
78762841 DB	276	};
	277
	278	static struct resource osk5912_kp_resources[] = {
	279	[0] = {
	280	.start = INT_KEYBOARD,
	281	.end = INT_KEYBOARD,
	282	.flags = IORESOURCE_IRQ,
	283	},
	284	};
	285
	286	static struct platform_device osk5912_kp_device = {
	287	.name = "omap-keypad",
	288	.id = -1,
	289	.dev = {
	290	.platform_data = &osk_kp_data,
	291	},
	292	.num_resources = ARRAY_SIZE(osk5912_kp_resources),
	293	.resource = osk5912_kp_resources,
	294	};
	295
4dcc6d24 DB	296	static struct omap_backlight_config mistral_bl_data = {
	297	.default_intensity = 0xa0,
	298	};
	299
	300	static struct platform_device mistral_bl_device = {
	301	.name = "omap-bl",
	302	.id = -1,
	303	.dev = {
	304	.platform_data = &mistral_bl_data,
	305	},
	306	};
	307
78762841 DB	308	static struct platform_device osk5912_lcd_device = {
	309	.name = "lcd_osk",
	310	.id = -1,
	311	};
	312
	313	static struct platform_device *mistral_devices[] __initdata = {
	314	&osk5912_kp_device,
4dcc6d24	315	&mistral_bl_device,
78762841 DB	316	&osk5912_lcd_device,
	317	};
	318
e8cdf7bd DB	319	static int mistral_get_pendown_state(void)
	320	{
	321	return !omap_get_gpio_datain(4);
	322	}
	323
78762841 DB	324	static const struct ads7846_platform_data mistral_ts_info = {
	325	.model = 7846,
	326	.vref_delay_usecs = 100, /* internal, no capacitor */
	327	.x_plate_ohms = 419,
	328	.y_plate_ohms = 486,
e8cdf7bd	329	.get_pendown_state = mistral_get_pendown_state,
78762841 DB	330	};
	331
	332	static struct spi_board_info __initdata mistral_boardinfo[] = { {
	333	/* MicroWire (bus 2) CS0 has an ads7846e */
	334	.modalias = "ads7846",
	335	.platform_data = &mistral_ts_info,
	336	.irq = OMAP_GPIO_IRQ(4),
	337	.max_speed_hz = 120000 /* max sample rate at 3V */
	338	* 26 /* command + data + overhead */,
	339	.bus_num = 2,
	340	.chip_select = 0,
	341	} };
	342
7c38cf02 TL	343	#ifdef CONFIG_PM
7c38cf02 TL	344	static irqreturn_t
0cd61b68	345	osk_mistral_wake_interrupt(int irq, void *ignored)
7c38cf02 TL	346	{
	347	return IRQ_HANDLED;
	348	}
	349	#endif
	350
	351	static void __init osk_mistral_init(void)
	352	{
78762841	353	/* NOTE: we could actually tell if there's a Mistral board
7c38cf02	354	* attached, e.g. by trying to read something from the ads7846.
78762841 DB	355	* But this arch_init() code is too early for that, since we
78762841 DB	356	* can't talk to the ads or even the i2c eeprom.
7c38cf02 TL	357	*/
7c38cf02 TL	358
c72d8950 DB	359	/* parallel camera interface */
	360	omap_cfg_reg(J15_1610_CAM_LCLK);
	361	omap_cfg_reg(J18_1610_CAM_D7);
	362	omap_cfg_reg(J19_1610_CAM_D6);
	363	omap_cfg_reg(J14_1610_CAM_D5);
	364	omap_cfg_reg(K18_1610_CAM_D4);
	365	omap_cfg_reg(K19_1610_CAM_D3);
	366	omap_cfg_reg(K15_1610_CAM_D2);
	367	omap_cfg_reg(K14_1610_CAM_D1);
	368	omap_cfg_reg(L19_1610_CAM_D0);
	369	omap_cfg_reg(L18_1610_CAM_VS);
	370	omap_cfg_reg(L15_1610_CAM_HS);
	371	omap_cfg_reg(M19_1610_CAM_RSTZ);
	372	omap_cfg_reg(Y15_1610_CAM_OUTCLK);
	373
	374	/* serial camera interface */
	375	omap_cfg_reg(H19_1610_CAM_EXCLK);
	376	omap_cfg_reg(W13_1610_CCP_CLKM);
	377	omap_cfg_reg(Y12_1610_CCP_CLKP);
	378	/* CCP_DATAM CONFLICTS WITH UART1.TX (and serial console) */
	379	// omap_cfg_reg(Y14_1610_CCP_DATAM);
	380	omap_cfg_reg(W14_1610_CCP_DATAP);
	381
	382	/* CAM_PWDN */
	383	if (omap_request_gpio(11) == 0) {
	384	omap_cfg_reg(N20_1610_GPIO11);
	385	omap_set_gpio_direction(11, 0 /* out */);
	386	omap_set_gpio_dataout(11, 0 /* off */);
	387	} else
	388	pr_debug("OSK+Mistral: CAM_PWDN is awol\n");
	389
	390
78762841 DB	391	// omap_cfg_reg(P19_1610_GPIO6); // BUSY
	392	omap_cfg_reg(P20_1610_GPIO4); // PENIRQ
	393	set_irq_type(OMAP_GPIO_IRQ(4), IRQT_FALLING);
	394	spi_register_board_info(mistral_boardinfo,
	395	ARRAY_SIZE(mistral_boardinfo));
	396
7c38cf02 TL	397	/* the sideways button (SW1) is for use as a "wakeup" button */
	398	omap_cfg_reg(N15_1610_MPUIO2);
	399	if (omap_request_gpio(OMAP_MPUIO(2)) == 0) {
	400	int ret = 0;
	401	omap_set_gpio_direction(OMAP_MPUIO(2), 1);
	402	set_irq_type(OMAP_GPIO_IRQ(OMAP_MPUIO(2)), IRQT_RISING);
	403	#ifdef CONFIG_PM
	404	/* share the IRQ in case someone wants to use the
	405	* button for more than wakeup from system sleep.
	406	*/
	407	ret = request_irq(OMAP_GPIO_IRQ(OMAP_MPUIO(2)),
	408	&osk_mistral_wake_interrupt,
52e405ea	409	IRQF_SHARED, "mistral_wakeup",
7c38cf02 TL	410	&osk_mistral_wake_interrupt);
	411	if (ret != 0) {
	412	omap_free_gpio(OMAP_MPUIO(2));
	413	printk(KERN_ERR "OSK+Mistral: no wakeup irq, %d?\n",
	414	ret);
	415	} else
	416	enable_irq_wake(OMAP_GPIO_IRQ(OMAP_MPUIO(2)));
	417	#endif
	418	} else
	419	printk(KERN_ERR "OSK+Mistral: wakeup button is awol\n");
78762841	420
4dcc6d24 DB	421	/* LCD: backlight, and power; power controls other devices on the
	422	* board, like the touchscreen, EEPROM, and wakeup (!) switch.
	423	*/
	424	omap_cfg_reg(PWL);
	425	if (omap_request_gpio(2) == 0) {
	426	omap_set_gpio_direction(2, 0 /* out */);
	427	omap_set_gpio_dataout(2, 1 /* on */);
	428	}
	429
78762841	430	platform_add_devices(mistral_devices, ARRAY_SIZE(mistral_devices));
7c38cf02 TL	431	}
	432	#else
	433	static void __init osk_mistral_init(void) { }
	434	#endif
	435
9b6553cd TL	436	#define EMIFS_CS3_VAL (0x88013141)
9b6553cd TL	437
1da177e4 LT	438	static void __init osk_init(void)
1da177e4 LT	439	{
9b6553cd TL	440	/* Workaround for wrong CS3 (NOR flash) timing
	441	* There are some U-Boot versions out there which configure
	442	* wrong CS3 memory timings. This mainly leads to CRC
6cbdc8c5	443	* or similar errors if you use NOR flash (e.g. with JFFS2)
9b6553cd TL	444	*/
	445	if (EMIFS_CCS(3) != EMIFS_CS3_VAL)
	446	EMIFS_CCS(3) = EMIFS_CS3_VAL;
	447
7c38cf02 TL	448	osk_flash_resource.end = osk_flash_resource.start = omap_cs3_phys();
7c38cf02 TL	449	osk_flash_resource.end += SZ_32M - 1;
1da177e4 LT	450	platform_add_devices(osk5912_devices, ARRAY_SIZE(osk5912_devices));
	451	omap_board_config = osk_config;
	452	omap_board_config_size = ARRAY_SIZE(osk_config);
	453	USB_TRANSCEIVER_CTRL_REG \|= (3 << 1);
7c38cf02	454
3179a019	455	omap_serial_init();
7c38cf02	456	osk_mistral_init();
1da177e4 LT	457	}
	458
	459	static void __init osk_map_io(void)
	460	{
87bd63f6	461	omap1_map_common_io();
1da177e4 LT	462	}
	463
	464	MACHINE_START(OMAP_OSK, "TI-OSK")
e9dea0c6	465	/* Maintainer: Dirk Behme <dirk.behme@de.bosch.com> */
e9dea0c6 RK	466	.phys_io = 0xfff00000,
	467	.io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
	468	.boot_params = 0x10000100,
	469	.map_io = osk_map_io,
	470	.init_irq = osk_init_irq,
	471	.init_machine = osk_init,
1da177e4 LT	472	.timer = &omap_timer,
1da177e4 LT	473	MACHINE_END