[deliverable/linux.git] / arch / arm / mach-omap1 / board-palmz71.c

/*
 * linux/arch/arm/mach-omap1/board-palmz71.c
 *
 * Modified from board-generic.c
 *
 * Support for the Palm Zire71 PDA.
 *
 * Original version : Laurent Gonzalez
 *
 * Modified for zire71 : Marek Vasut
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/notifier.h>
#include <linux/clk.h>
#include <linux/irq.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>

#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>

#include <mach/gpio.h>
#include <plat/flash.h>
#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/dma.h>
#include <plat/tc.h>
#include <plat/board.h>
#include <plat/irda.h>
#include <plat/keypad.h>
#include <plat/common.h>
#include <plat/omap-alsa.h>

#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>

#define PALMZ71_USBDETECT_GPIO	0
#define PALMZ71_PENIRQ_GPIO	6
#define PALMZ71_MMC_WP_GPIO	8
#define PALMZ71_HDQ_GPIO 	11

#define PALMZ71_HOTSYNC_GPIO	OMAP_MPUIO(1)
#define PALMZ71_CABLE_GPIO	OMAP_MPUIO(2)
#define PALMZ71_SLIDER_GPIO	OMAP_MPUIO(3)
#define PALMZ71_MMC_IN_GPIO	OMAP_MPUIO(4)

static void __init
omap_palmz71_init_irq(void)
{
	omap1_init_common_hw();
	omap1_init_irq();
}

static const unsigned int palmz71_keymap[] = {
	KEY(0, 0, KEY_F1),
	KEY(1, 0, KEY_F2),
	KEY(2, 0, KEY_F3),
	KEY(3, 0, KEY_F4),
	KEY(4, 0, KEY_POWER),
	KEY(0, 1, KEY_LEFT),
	KEY(1, 1, KEY_DOWN),
	KEY(2, 1, KEY_UP),
	KEY(3, 1, KEY_RIGHT),
	KEY(4, 1, KEY_ENTER),
	KEY(0, 2, KEY_CAMERA),
};

static const struct matrix_keymap_data palmz71_keymap_data = {
	.keymap		= palmz71_keymap,
	.keymap_size	= ARRAY_SIZE(palmz71_keymap),
};

static struct omap_kp_platform_data palmz71_kp_data = {
	.rows	= 8,
	.cols	= 8,
	.keymap_data	= &palmz71_keymap_data,
	.rep	= true,
	.delay	= 80,
};

static struct resource palmz71_kp_resources[] = {
	[0] = {
		.start	= INT_KEYBOARD,
		.end	= INT_KEYBOARD,
		.flags	= IORESOURCE_IRQ,
	},
};

static struct platform_device palmz71_kp_device = {
	.name	= "omap-keypad",
	.id	= -1,
	.dev	= {
		.platform_data = &palmz71_kp_data,
	},
	.num_resources	= ARRAY_SIZE(palmz71_kp_resources),
	.resource	= palmz71_kp_resources,
};

static struct mtd_partition palmz71_rom_partitions[] = {
	/* PalmOS "Small ROM", contains the bootloader and the debugger */
	{
		.name		= "smallrom",
		.offset		= 0,
		.size		= 0xa000,
		.mask_flags	= MTD_WRITEABLE,
	},
	/* PalmOS "Big ROM", a filesystem with all the OS code and data */
	{
		.name	= "bigrom",
		.offset	= SZ_128K,
		/*
		 * 0x5f0000 bytes big in the multi-language ("EFIGS") version,
		 * 0x7b0000 bytes in the English-only ("enUS") version.
		 */
		.size		= 0x7b0000,
		.mask_flags	= MTD_WRITEABLE,
	},
};

static struct physmap_flash_data palmz71_rom_data = {
	.width		= 2,
	.set_vpp	= omap1_set_vpp,
	.parts		= palmz71_rom_partitions,
	.nr_parts	= ARRAY_SIZE(palmz71_rom_partitions),
};

static struct resource palmz71_rom_resource = {
	.start	= OMAP_CS0_PHYS,
	.end	= OMAP_CS0_PHYS + SZ_8M - 1,
	.flags	= IORESOURCE_MEM,
};

static struct platform_device palmz71_rom_device = {
	.name	= "physmap-flash",
	.id	= -1,
	.dev = {
		.platform_data = &palmz71_rom_data,
	},
	.num_resources	= 1,
	.resource	= &palmz71_rom_resource,
};

static struct platform_device palmz71_lcd_device = {
	.name	= "lcd_palmz71",
	.id	= -1,
};

static struct omap_irda_config palmz71_irda_config = {
	.transceiver_cap	= IR_SIRMODE,
	.rx_channel		= OMAP_DMA_UART3_RX,
	.tx_channel		= OMAP_DMA_UART3_TX,
	.dest_start		= UART3_THR,
	.src_start		= UART3_RHR,
	.tx_trigger		= 0,
	.rx_trigger		= 0,
};

static struct resource palmz71_irda_resources[] = {
	[0] = {
		.start	= INT_UART3,
		.end	= INT_UART3,
		.flags	= IORESOURCE_IRQ,
	},
};

static struct platform_device palmz71_irda_device = {
	.name	= "omapirda",
	.id	= -1,
	.dev = {
		.platform_data = &palmz71_irda_config,
	},
	.num_resources	= ARRAY_SIZE(palmz71_irda_resources),
	.resource	= palmz71_irda_resources,
};

static struct platform_device palmz71_spi_device = {
	.name	= "spi_palmz71",
	.id	= -1,
};

static struct omap_backlight_config palmz71_backlight_config = {
	.default_intensity	= 0xa0,
};

static struct platform_device palmz71_backlight_device = {
	.name	= "omap-bl",
	.id	= -1,
	.dev	= {
		.platform_data = &palmz71_backlight_config,
	},
};

static struct platform_device *devices[] __initdata = {
	&palmz71_rom_device,
	&palmz71_kp_device,
	&palmz71_lcd_device,
	&palmz71_irda_device,
	&palmz71_spi_device,
	&palmz71_backlight_device,
};

static int
palmz71_get_pendown_state(void)
{
	return !gpio_get_value(PALMZ71_PENIRQ_GPIO);
}

static const struct ads7846_platform_data palmz71_ts_info = {
	.model			= 7846,
	.vref_delay_usecs	= 100,	/* internal, no capacitor */
	.x_plate_ohms		= 419,
	.y_plate_ohms		= 486,
	.get_pendown_state	= palmz71_get_pendown_state,
};

static struct spi_board_info __initdata palmz71_boardinfo[] = { {
	/* MicroWire (bus 2) CS0 has an ads7846e */
	.modalias	= "ads7846",
	.platform_data	= &palmz71_ts_info,
	.irq		= OMAP_GPIO_IRQ(PALMZ71_PENIRQ_GPIO),
	.max_speed_hz	= 120000	/* max sample rate at 3V */
				* 26	/* command + data + overhead */,
	.bus_num	= 2,
	.chip_select	= 0,
} };

static struct omap_usb_config palmz71_usb_config __initdata = {
	.register_dev	= 1,	/* Mini-B only receptacle */
	.hmc_mode	= 0,
	.pins[0]	= 2,
};

static struct omap_lcd_config palmz71_lcd_config __initdata = {
	.ctrl_name = "internal",
};

static struct omap_board_config_kernel palmz71_config[] __initdata = {
	{OMAP_TAG_LCD,	&palmz71_lcd_config},
};

static irqreturn_t
palmz71_powercable(int irq, void *dev_id)
{
	if (gpio_get_value(PALMZ71_USBDETECT_GPIO)) {
		printk(KERN_INFO "PM: Power cable connected\n");
		irq_set_irq_type(gpio_to_irq(PALMZ71_USBDETECT_GPIO),
				 IRQ_TYPE_EDGE_FALLING);
	} else {
		printk(KERN_INFO "PM: Power cable disconnected\n");
		irq_set_irq_type(gpio_to_irq(PALMZ71_USBDETECT_GPIO),
				 IRQ_TYPE_EDGE_RISING);
	}
	return IRQ_HANDLED;
}

static void __init
omap_mpu_wdt_mode(int mode)
{
	if (mode)
		omap_writew(0x8000, OMAP_WDT_TIMER_MODE);
	else {
		omap_writew(0x00f5, OMAP_WDT_TIMER_MODE);
		omap_writew(0x00a0, OMAP_WDT_TIMER_MODE);
	}
}

static void __init
palmz71_gpio_setup(int early)
{
	if (early) {
		/* Only set GPIO1 so we have a working serial */
		gpio_direction_output(1, 1);
	} else {
		/* Set MMC/SD host WP pin as input */
		if (gpio_request(PALMZ71_MMC_WP_GPIO, "MMC WP") < 0) {
			printk(KERN_ERR "Could not reserve WP GPIO!\n");
			return;
		}
		gpio_direction_input(PALMZ71_MMC_WP_GPIO);

		/* Monitor the Power-cable-connected signal */
		if (gpio_request(PALMZ71_USBDETECT_GPIO, "USB detect") < 0) {
			printk(KERN_ERR
				"Could not reserve cable signal GPIO!\n");
			return;
		}
		gpio_direction_input(PALMZ71_USBDETECT_GPIO);
		if (request_irq(gpio_to_irq(PALMZ71_USBDETECT_GPIO),
				palmz71_powercable, IRQF_SAMPLE_RANDOM,
				"palmz71-cable", 0))
			printk(KERN_ERR
					"IRQ request for power cable failed!\n");
		palmz71_powercable(gpio_to_irq(PALMZ71_USBDETECT_GPIO), 0);
	}
}

static void __init
omap_palmz71_init(void)
{
	/* mux pins for uarts */
	omap_cfg_reg(UART1_TX);
	omap_cfg_reg(UART1_RTS);
	omap_cfg_reg(UART2_TX);
	omap_cfg_reg(UART2_RTS);
	omap_cfg_reg(UART3_TX);
	omap_cfg_reg(UART3_RX);

	palmz71_gpio_setup(1);
	omap_mpu_wdt_mode(0);

	omap_board_config = palmz71_config;
	omap_board_config_size = ARRAY_SIZE(palmz71_config);

	platform_add_devices(devices, ARRAY_SIZE(devices));

	spi_register_board_info(palmz71_boardinfo,
				ARRAY_SIZE(palmz71_boardinfo));
	omap1_usb_init(&palmz71_usb_config);
	omap_serial_init();
	omap_register_i2c_bus(1, 100, NULL, 0);
	palmz71_gpio_setup(0);
}

static void __init
omap_palmz71_map_io(void)
{
	omap1_map_common_io();
}

MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
	.boot_params	= 0x10000100,
	.map_io		= omap_palmz71_map_io,
	.reserve	= omap_reserve,
	.init_irq	= omap_palmz71_init_irq,
	.init_machine	= omap_palmz71_init,
	.timer		= &omap1_timer,
MACHINE_END
Commit	Line	Data
ec70e8af MV	1	/*
	2	* linux/arch/arm/mach-omap1/board-palmz71.c
	3	*
	4	* Modified from board-generic.c
	5	*
	6	* Support for the Palm Zire71 PDA.
	7	*
	8	* Original version : Laurent Gonzalez
	9	*
	10	* Modified for zire71 : Marek Vasut
	11	*
	12	* This program is free software; you can redistribute it and/or modify
	13	* it under the terms of the GNU General Public License version 2 as
	14	* published by the Free Software Foundation.
	15	*/
	16
	17	#include <linux/delay.h>
	18	#include <linux/kernel.h>
	19	#include <linux/init.h>
	20	#include <linux/platform_device.h>
	21	#include <linux/notifier.h>
	22	#include <linux/clk.h>
	23	#include <linux/irq.h>
	24	#include <linux/input.h>
	25	#include <linux/interrupt.h>
	26	#include <linux/mtd/mtd.h>
	27	#include <linux/mtd/partitions.h>
561b036a	28	#include <linux/mtd/physmap.h>
ec70e8af	29
a09e64fb	30	#include <mach/hardware.h>
ec70e8af MV	31	#include <asm/mach-types.h>
	32	#include <asm/mach/arch.h>
	33	#include <asm/mach/map.h>
ec70e8af	34
a09e64fb	35	#include <mach/gpio.h>
561b036a	36	#include <plat/flash.h>
ce491cf8 TL	37	#include <plat/mux.h>
	38	#include <plat/usb.h>
	39	#include <plat/dma.h>
	40	#include <plat/tc.h>
	41	#include <plat/board.h>
	42	#include <plat/irda.h>
	43	#include <plat/keypad.h>
	44	#include <plat/common.h>
	45	#include <plat/omap-alsa.h>
ec70e8af	46
ec70e8af MV	47	#include <linux/spi/spi.h>
	48	#include <linux/spi/ads7846.h>
	49
b2830810 TL	50	#define PALMZ71_USBDETECT_GPIO 0
	51	#define PALMZ71_PENIRQ_GPIO 6
	52	#define PALMZ71_MMC_WP_GPIO 8
	53	#define PALMZ71_HDQ_GPIO 11
	54
	55	#define PALMZ71_HOTSYNC_GPIO OMAP_MPUIO(1)
	56	#define PALMZ71_CABLE_GPIO OMAP_MPUIO(2)
	57	#define PALMZ71_SLIDER_GPIO OMAP_MPUIO(3)
	58	#define PALMZ71_MMC_IN_GPIO OMAP_MPUIO(4)
	59
ec70e8af MV	60	static void __init
	61	omap_palmz71_init_irq(void)
	62	{
	63	omap1_init_common_hw();
741e3a89	64	omap1_init_irq();
ec70e8af MV	65	}
ec70e8af MV	66
da1f026b	67	static const unsigned int palmz71_keymap[] = {
ec70e8af	68	KEY(0, 0, KEY_F1),
da1f026b JK	69	KEY(1, 0, KEY_F2),
	70	KEY(2, 0, KEY_F3),
	71	KEY(3, 0, KEY_F4),
	72	KEY(4, 0, KEY_POWER),
	73	KEY(0, 1, KEY_LEFT),
ec70e8af	74	KEY(1, 1, KEY_DOWN),
da1f026b JK	75	KEY(2, 1, KEY_UP),
	76	KEY(3, 1, KEY_RIGHT),
	77	KEY(4, 1, KEY_ENTER),
	78	KEY(0, 2, KEY_CAMERA),
	79	};
	80
	81	static const struct matrix_keymap_data palmz71_keymap_data = {
	82	.keymap = palmz71_keymap,
	83	.keymap_size = ARRAY_SIZE(palmz71_keymap),
ec70e8af MV	84	};
	85
	86	static struct omap_kp_platform_data palmz71_kp_data = {
	87	.rows = 8,
	88	.cols = 8,
da1f026b JK	89	.keymap_data = &palmz71_keymap_data,
da1f026b JK	90	.rep = true,
ec70e8af MV	91	.delay = 80,
	92	};
	93
	94	static struct resource palmz71_kp_resources[] = {
	95	[0] = {
	96	.start = INT_KEYBOARD,
	97	.end = INT_KEYBOARD,
	98	.flags = IORESOURCE_IRQ,
	99	},
	100	};
	101
	102	static struct platform_device palmz71_kp_device = {
	103	.name = "omap-keypad",
	104	.id = -1,
	105	.dev = {
	106	.platform_data = &palmz71_kp_data,
	107	},
	108	.num_resources = ARRAY_SIZE(palmz71_kp_resources),
	109	.resource = palmz71_kp_resources,
	110	};
	111
	112	static struct mtd_partition palmz71_rom_partitions[] = {
	113	/* PalmOS "Small ROM", contains the bootloader and the debugger */
	114	{
	115	.name = "smallrom",
	116	.offset = 0,
	117	.size = 0xa000,
	118	.mask_flags = MTD_WRITEABLE,
	119	},
	120	/* PalmOS "Big ROM", a filesystem with all the OS code and data */
	121	{
	122	.name = "bigrom",
	123	.offset = SZ_128K,
	124	/*
	125	* 0x5f0000 bytes big in the multi-language ("EFIGS") version,
	126	* 0x7b0000 bytes in the English-only ("enUS") version.
	127	*/
	128	.size = 0x7b0000,
	129	.mask_flags = MTD_WRITEABLE,
	130	},
	131	};
	132
561b036a	133	static struct physmap_flash_data palmz71_rom_data = {
ec70e8af	134	.width = 2,
561b036a	135	.set_vpp = omap1_set_vpp,
ec70e8af MV	136	.parts = palmz71_rom_partitions,
	137	.nr_parts = ARRAY_SIZE(palmz71_rom_partitions),
	138	};
	139
	140	static struct resource palmz71_rom_resource = {
	141	.start = OMAP_CS0_PHYS,
	142	.end = OMAP_CS0_PHYS + SZ_8M - 1,
	143	.flags = IORESOURCE_MEM,
	144	};
	145
	146	static struct platform_device palmz71_rom_device = {
561b036a	147	.name = "physmap-flash",
ec70e8af MV	148	.id = -1,
	149	.dev = {
	150	.platform_data = &palmz71_rom_data,
	151	},
	152	.num_resources = 1,
	153	.resource = &palmz71_rom_resource,
	154	};
	155
	156	static struct platform_device palmz71_lcd_device = {
	157	.name = "lcd_palmz71",
	158	.id = -1,
	159	};
	160
	161	static struct omap_irda_config palmz71_irda_config = {
	162	.transceiver_cap = IR_SIRMODE,
	163	.rx_channel = OMAP_DMA_UART3_RX,
	164	.tx_channel = OMAP_DMA_UART3_TX,
	165	.dest_start = UART3_THR,
	166	.src_start = UART3_RHR,
	167	.tx_trigger = 0,
	168	.rx_trigger = 0,
	169	};
	170
	171	static struct resource palmz71_irda_resources[] = {
	172	[0] = {
	173	.start = INT_UART3,
	174	.end = INT_UART3,
	175	.flags = IORESOURCE_IRQ,
	176	},
	177	};
	178
	179	static struct platform_device palmz71_irda_device = {
	180	.name = "omapirda",
	181	.id = -1,
	182	.dev = {
	183	.platform_data = &palmz71_irda_config,
	184	},
	185	.num_resources = ARRAY_SIZE(palmz71_irda_resources),
	186	.resource = palmz71_irda_resources,
	187	};
	188
	189	static struct platform_device palmz71_spi_device = {
	190	.name = "spi_palmz71",
	191	.id = -1,
	192	};
	193
ec70e8af MV	194	static struct omap_backlight_config palmz71_backlight_config = {
	195	.default_intensity = 0xa0,
	196	};
	197
	198	static struct platform_device palmz71_backlight_device = {
	199	.name = "omap-bl",
	200	.id = -1,
	201	.dev = {
	202	.platform_data = &palmz71_backlight_config,
	203	},
	204	};
	205
	206	static struct platform_device *devices[] __initdata = {
	207	&palmz71_rom_device,
	208	&palmz71_kp_device,
ec70e8af MV	209	&palmz71_lcd_device,
	210	&palmz71_irda_device,
	211	&palmz71_spi_device,
	212	&palmz71_backlight_device,
	213	};
	214
	215	static int
	216	palmz71_get_pendown_state(void)
	217	{
0b84b5ca	218	return !gpio_get_value(PALMZ71_PENIRQ_GPIO);
ec70e8af MV	219	}
	220
	221	static const struct ads7846_platform_data palmz71_ts_info = {
	222	.model = 7846,
	223	.vref_delay_usecs = 100, /* internal, no capacitor */
	224	.x_plate_ohms = 419,
	225	.y_plate_ohms = 486,
	226	.get_pendown_state = palmz71_get_pendown_state,
	227	};
	228
	229	static struct spi_board_info __initdata palmz71_boardinfo[] = { {
	230	/* MicroWire (bus 2) CS0 has an ads7846e */
	231	.modalias = "ads7846",
	232	.platform_data = &palmz71_ts_info,
	233	.irq = OMAP_GPIO_IRQ(PALMZ71_PENIRQ_GPIO),
	234	.max_speed_hz = 120000 /* max sample rate at 3V */
	235	* 26 /* command + data + overhead */,
	236	.bus_num = 2,
	237	.chip_select = 0,
	238	} };
	239
	240	static struct omap_usb_config palmz71_usb_config __initdata = {
	241	.register_dev = 1, /* Mini-B only receptacle */
	242	.hmc_mode = 0,
	243	.pins[0] = 2,
	244	};
	245
ec70e8af MV	246	static struct omap_lcd_config palmz71_lcd_config __initdata = {
	247	.ctrl_name = "internal",
	248	};
	249
e27a93a9	250	static struct omap_board_config_kernel palmz71_config[] __initdata = {
ec70e8af	251	{OMAP_TAG_LCD, &palmz71_lcd_config},
ec70e8af MV	252	};
	253
	254	static irqreturn_t
	255	palmz71_powercable(int irq, void *dev_id)
	256	{
0b84b5ca	257	if (gpio_get_value(PALMZ71_USBDETECT_GPIO)) {
ec70e8af	258	printk(KERN_INFO "PM: Power cable connected\n");
6845664a TG	259	irq_set_irq_type(gpio_to_irq(PALMZ71_USBDETECT_GPIO),
6845664a TG	260	IRQ_TYPE_EDGE_FALLING);
ec70e8af MV	261	} else {
ec70e8af MV	262	printk(KERN_INFO "PM: Power cable disconnected\n");
6845664a TG	263	irq_set_irq_type(gpio_to_irq(PALMZ71_USBDETECT_GPIO),
6845664a TG	264	IRQ_TYPE_EDGE_RISING);
ec70e8af MV	265	}
	266	return IRQ_HANDLED;
	267	}
	268
	269	static void __init
	270	omap_mpu_wdt_mode(int mode)
	271	{
	272	if (mode)
	273	omap_writew(0x8000, OMAP_WDT_TIMER_MODE);
	274	else {
	275	omap_writew(0x00f5, OMAP_WDT_TIMER_MODE);
	276	omap_writew(0x00a0, OMAP_WDT_TIMER_MODE);
	277	}
	278	}
	279
	280	static void __init
	281	palmz71_gpio_setup(int early)
	282	{
	283	if (early) {
	284	/* Only set GPIO1 so we have a working serial */
e918edf7	285	gpio_direction_output(1, 1);
ec70e8af MV	286	} else {
ec70e8af MV	287	/* Set MMC/SD host WP pin as input */
f2d18fea	288	if (gpio_request(PALMZ71_MMC_WP_GPIO, "MMC WP") < 0) {
ec70e8af MV	289	printk(KERN_ERR "Could not reserve WP GPIO!\n");
	290	return;
	291	}
40e3925b	292	gpio_direction_input(PALMZ71_MMC_WP_GPIO);
ec70e8af MV	293
ec70e8af MV	294	/* Monitor the Power-cable-connected signal */
f2d18fea	295	if (gpio_request(PALMZ71_USBDETECT_GPIO, "USB detect") < 0) {
ec70e8af MV	296	printk(KERN_ERR
	297	"Could not reserve cable signal GPIO!\n");
	298	return;
	299	}
40e3925b	300	gpio_direction_input(PALMZ71_USBDETECT_GPIO);
15f74b03	301	if (request_irq(gpio_to_irq(PALMZ71_USBDETECT_GPIO),
ec70e8af MV	302	palmz71_powercable, IRQF_SAMPLE_RANDOM,
	303	"palmz71-cable", 0))
	304	printk(KERN_ERR
	305	"IRQ request for power cable failed!\n");
15f74b03	306	palmz71_powercable(gpio_to_irq(PALMZ71_USBDETECT_GPIO), 0);
ec70e8af MV	307	}
	308	}
	309
	310	static void __init
	311	omap_palmz71_init(void)
	312	{
c33da3a8 JK	313	/* mux pins for uarts */
	314	omap_cfg_reg(UART1_TX);
	315	omap_cfg_reg(UART1_RTS);
	316	omap_cfg_reg(UART2_TX);
	317	omap_cfg_reg(UART2_RTS);
	318	omap_cfg_reg(UART3_TX);
	319	omap_cfg_reg(UART3_RX);
	320
ec70e8af MV	321	palmz71_gpio_setup(1);
	322	omap_mpu_wdt_mode(0);
	323
	324	omap_board_config = palmz71_config;
	325	omap_board_config_size = ARRAY_SIZE(palmz71_config);
	326
	327	platform_add_devices(devices, ARRAY_SIZE(devices));
	328
	329	spi_register_board_info(palmz71_boardinfo,
	330	ARRAY_SIZE(palmz71_boardinfo));
dd0cdd88	331	omap1_usb_init(&palmz71_usb_config);
ec70e8af	332	omap_serial_init();
1ed16a86	333	omap_register_i2c_bus(1, 100, NULL, 0);
ec70e8af MV	334	palmz71_gpio_setup(0);
	335	}
	336
	337	static void __init
	338	omap_palmz71_map_io(void)
	339	{
	340	omap1_map_common_io();
	341	}
	342
	343	MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
71ee7dad RK	344	.boot_params = 0x10000100,
	345	.map_io = omap_palmz71_map_io,
	346	.reserve = omap_reserve,
	347	.init_irq = omap_palmz71_init_irq,
	348	.init_machine = omap_palmz71_init,
e74984e4	349	.timer = &omap1_timer,
ec70e8af	350	MACHINE_END