Commit | Line | Data |
---|---|---|
46ba0abf SS |
1 | /* |
2 | * Board support file for OMAP4430 SDP. | |
3 | * | |
4 | * Copyright (C) 2009 Texas Instruments | |
5 | * | |
6 | * Author: Santosh Shilimkar <santosh.shilimkar@ti.com> | |
7 | * | |
8 | * Based on mach-omap2/board-3430sdp.c | |
9 | * | |
10 | * This program is free software; you can redistribute it and/or modify | |
11 | * it under the terms of the GNU General Public License version 2 as | |
12 | * published by the Free Software Foundation. | |
13 | */ | |
14 | ||
15 | #include <linux/kernel.h> | |
16 | #include <linux/init.h> | |
17 | #include <linux/platform_device.h> | |
18 | #include <linux/io.h> | |
19 | #include <linux/gpio.h> | |
bce06683 | 20 | #include <linux/usb/otg.h> |
b2aa5e57 | 21 | #include <linux/spi/spi.h> |
6e30a7db | 22 | #include <linux/i2c/twl.h> |
94ce7a66 | 23 | #include <linux/gpio_keys.h> |
6e30a7db | 24 | #include <linux/regulator/machine.h> |
509b6d93 | 25 | #include <linux/leds.h> |
f389f4cb | 26 | #include <linux/leds_pwm.h> |
46ba0abf SS |
27 | |
28 | #include <mach/hardware.h> | |
fbc9be10 | 29 | #include <mach/omap4-common.h> |
46ba0abf SS |
30 | #include <asm/mach-types.h> |
31 | #include <asm/mach/arch.h> | |
32 | #include <asm/mach/map.h> | |
33 | ||
ce491cf8 TL |
34 | #include <plat/board.h> |
35 | #include <plat/common.h> | |
bce06683 | 36 | #include <plat/usb.h> |
717c1fbf | 37 | #include <plat/mmc.h> |
59556765 | 38 | #include <plat/omap4-keypad.h> |
04aeae77 | 39 | |
fb6bf632 | 40 | #include "mux.h" |
717c1fbf | 41 | #include "hsmmc.h" |
04aeae77 | 42 | #include "timer-gp.h" |
4814ced5 | 43 | #include "control.h" |
46ba0abf | 44 | |
b2aa5e57 AA |
45 | #define ETH_KS8851_IRQ 34 |
46 | #define ETH_KS8851_POWER_ON 48 | |
47 | #define ETH_KS8851_QUART 138 | |
94ce7a66 SD |
48 | #define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO 184 |
49 | #define OMAP4_SFH7741_ENABLE_GPIO 188 | |
b2aa5e57 | 50 | |
59556765 SR |
51 | static const int sdp4430_keymap[] = { |
52 | KEY(0, 0, KEY_E), | |
53 | KEY(0, 1, KEY_R), | |
54 | KEY(0, 2, KEY_T), | |
55 | KEY(0, 3, KEY_HOME), | |
56 | KEY(0, 4, KEY_F5), | |
57 | KEY(0, 5, KEY_UNKNOWN), | |
58 | KEY(0, 6, KEY_I), | |
59 | KEY(0, 7, KEY_LEFTSHIFT), | |
60 | ||
61 | KEY(1, 0, KEY_D), | |
62 | KEY(1, 1, KEY_F), | |
63 | KEY(1, 2, KEY_G), | |
64 | KEY(1, 3, KEY_SEND), | |
65 | KEY(1, 4, KEY_F6), | |
66 | KEY(1, 5, KEY_UNKNOWN), | |
67 | KEY(1, 6, KEY_K), | |
68 | KEY(1, 7, KEY_ENTER), | |
69 | ||
70 | KEY(2, 0, KEY_X), | |
71 | KEY(2, 1, KEY_C), | |
72 | KEY(2, 2, KEY_V), | |
73 | KEY(2, 3, KEY_END), | |
74 | KEY(2, 4, KEY_F7), | |
75 | KEY(2, 5, KEY_UNKNOWN), | |
76 | KEY(2, 6, KEY_DOT), | |
77 | KEY(2, 7, KEY_CAPSLOCK), | |
78 | ||
79 | KEY(3, 0, KEY_Z), | |
80 | KEY(3, 1, KEY_KPPLUS), | |
81 | KEY(3, 2, KEY_B), | |
82 | KEY(3, 3, KEY_F1), | |
83 | KEY(3, 4, KEY_F8), | |
84 | KEY(3, 5, KEY_UNKNOWN), | |
85 | KEY(3, 6, KEY_O), | |
86 | KEY(3, 7, KEY_SPACE), | |
87 | ||
88 | KEY(4, 0, KEY_W), | |
89 | KEY(4, 1, KEY_Y), | |
90 | KEY(4, 2, KEY_U), | |
91 | KEY(4, 3, KEY_F2), | |
92 | KEY(4, 4, KEY_VOLUMEUP), | |
93 | KEY(4, 5, KEY_UNKNOWN), | |
94 | KEY(4, 6, KEY_L), | |
95 | KEY(4, 7, KEY_LEFT), | |
96 | ||
97 | KEY(5, 0, KEY_S), | |
98 | KEY(5, 1, KEY_H), | |
99 | KEY(5, 2, KEY_J), | |
100 | KEY(5, 3, KEY_F3), | |
101 | KEY(5, 4, KEY_F9), | |
102 | KEY(5, 5, KEY_VOLUMEDOWN), | |
103 | KEY(5, 6, KEY_M), | |
104 | KEY(5, 7, KEY_RIGHT), | |
105 | ||
106 | KEY(6, 0, KEY_Q), | |
107 | KEY(6, 1, KEY_A), | |
108 | KEY(6, 2, KEY_N), | |
109 | KEY(6, 3, KEY_BACK), | |
110 | KEY(6, 4, KEY_BACKSPACE), | |
111 | KEY(6, 5, KEY_UNKNOWN), | |
112 | KEY(6, 6, KEY_P), | |
113 | KEY(6, 7, KEY_UP), | |
114 | ||
115 | KEY(7, 0, KEY_PROG1), | |
116 | KEY(7, 1, KEY_PROG2), | |
117 | KEY(7, 2, KEY_PROG3), | |
118 | KEY(7, 3, KEY_PROG4), | |
119 | KEY(7, 4, KEY_F4), | |
120 | KEY(7, 5, KEY_UNKNOWN), | |
121 | KEY(7, 6, KEY_OK), | |
122 | KEY(7, 7, KEY_DOWN), | |
123 | }; | |
124 | ||
125 | static struct matrix_keymap_data sdp4430_keymap_data = { | |
126 | .keymap = sdp4430_keymap, | |
127 | .keymap_size = ARRAY_SIZE(sdp4430_keymap), | |
128 | }; | |
129 | ||
130 | static struct omap4_keypad_platform_data sdp4430_keypad_data = { | |
131 | .keymap_data = &sdp4430_keymap_data, | |
132 | .rows = 8, | |
133 | .cols = 8, | |
134 | }; | |
509b6d93 H |
135 | static struct gpio_led sdp4430_gpio_leds[] = { |
136 | { | |
137 | .name = "omap4:green:debug0", | |
138 | .gpio = 61, | |
139 | }, | |
140 | { | |
141 | .name = "omap4:green:debug1", | |
142 | .gpio = 30, | |
143 | }, | |
144 | { | |
145 | .name = "omap4:green:debug2", | |
146 | .gpio = 7, | |
147 | }, | |
148 | { | |
149 | .name = "omap4:green:debug3", | |
150 | .gpio = 8, | |
151 | }, | |
152 | { | |
153 | .name = "omap4:green:debug4", | |
154 | .gpio = 50, | |
155 | }, | |
156 | { | |
157 | .name = "omap4:blue:user", | |
158 | .gpio = 169, | |
159 | }, | |
160 | { | |
161 | .name = "omap4:red:user", | |
162 | .gpio = 170, | |
163 | }, | |
164 | { | |
165 | .name = "omap4:green:user", | |
166 | .gpio = 139, | |
167 | }, | |
168 | ||
169 | }; | |
170 | ||
94ce7a66 SD |
171 | static struct gpio_keys_button sdp4430_gpio_keys[] = { |
172 | { | |
173 | .desc = "Proximity Sensor", | |
174 | .type = EV_SW, | |
175 | .code = SW_FRONT_PROXIMITY, | |
176 | .gpio = OMAP4_SFH7741_SENSOR_OUTPUT_GPIO, | |
177 | .active_low = 0, | |
178 | } | |
179 | }; | |
180 | ||
509b6d93 H |
181 | static struct gpio_led_platform_data sdp4430_led_data = { |
182 | .leds = sdp4430_gpio_leds, | |
183 | .num_leds = ARRAY_SIZE(sdp4430_gpio_leds), | |
184 | }; | |
185 | ||
f389f4cb H |
186 | static struct led_pwm sdp4430_pwm_leds[] = { |
187 | { | |
188 | .name = "omap4:green:chrg", | |
189 | .pwm_id = 1, | |
190 | .max_brightness = 255, | |
191 | .pwm_period_ns = 7812500, | |
192 | }, | |
193 | }; | |
194 | ||
195 | static struct led_pwm_platform_data sdp4430_pwm_data = { | |
196 | .num_leds = ARRAY_SIZE(sdp4430_pwm_leds), | |
197 | .leds = sdp4430_pwm_leds, | |
198 | }; | |
199 | ||
200 | static struct platform_device sdp4430_leds_pwm = { | |
201 | .name = "leds_pwm", | |
202 | .id = -1, | |
203 | .dev = { | |
204 | .platform_data = &sdp4430_pwm_data, | |
205 | }, | |
206 | }; | |
207 | ||
94ce7a66 SD |
208 | static int omap_prox_activate(struct device *dev) |
209 | { | |
210 | gpio_set_value(OMAP4_SFH7741_ENABLE_GPIO , 1); | |
211 | return 0; | |
212 | } | |
213 | ||
214 | static void omap_prox_deactivate(struct device *dev) | |
215 | { | |
216 | gpio_set_value(OMAP4_SFH7741_ENABLE_GPIO , 0); | |
217 | } | |
218 | ||
219 | static struct gpio_keys_platform_data sdp4430_gpio_keys_data = { | |
220 | .buttons = sdp4430_gpio_keys, | |
221 | .nbuttons = ARRAY_SIZE(sdp4430_gpio_keys), | |
222 | .enable = omap_prox_activate, | |
223 | .disable = omap_prox_deactivate, | |
224 | }; | |
225 | ||
226 | static struct platform_device sdp4430_gpio_keys_device = { | |
227 | .name = "gpio-keys", | |
228 | .id = -1, | |
229 | .dev = { | |
230 | .platform_data = &sdp4430_gpio_keys_data, | |
231 | }, | |
232 | }; | |
233 | ||
509b6d93 H |
234 | static struct platform_device sdp4430_leds_gpio = { |
235 | .name = "leds-gpio", | |
236 | .id = -1, | |
237 | .dev = { | |
238 | .platform_data = &sdp4430_led_data, | |
239 | }, | |
240 | }; | |
b2aa5e57 AA |
241 | static struct spi_board_info sdp4430_spi_board_info[] __initdata = { |
242 | { | |
243 | .modalias = "ks8851", | |
244 | .bus_num = 1, | |
245 | .chip_select = 0, | |
246 | .max_speed_hz = 24000000, | |
247 | .irq = ETH_KS8851_IRQ, | |
248 | }, | |
249 | }; | |
250 | ||
251 | static int omap_ethernet_init(void) | |
252 | { | |
253 | int status; | |
254 | ||
255 | /* Request of GPIO lines */ | |
256 | ||
257 | status = gpio_request(ETH_KS8851_POWER_ON, "eth_power"); | |
258 | if (status) { | |
259 | pr_err("Cannot request GPIO %d\n", ETH_KS8851_POWER_ON); | |
260 | return status; | |
261 | } | |
262 | ||
263 | status = gpio_request(ETH_KS8851_QUART, "quart"); | |
264 | if (status) { | |
265 | pr_err("Cannot request GPIO %d\n", ETH_KS8851_QUART); | |
266 | goto error1; | |
267 | } | |
268 | ||
269 | status = gpio_request(ETH_KS8851_IRQ, "eth_irq"); | |
270 | if (status) { | |
271 | pr_err("Cannot request GPIO %d\n", ETH_KS8851_IRQ); | |
272 | goto error2; | |
273 | } | |
274 | ||
275 | /* Configuration of requested GPIO lines */ | |
276 | ||
277 | status = gpio_direction_output(ETH_KS8851_POWER_ON, 1); | |
278 | if (status) { | |
279 | pr_err("Cannot set output GPIO %d\n", ETH_KS8851_IRQ); | |
280 | goto error3; | |
281 | } | |
282 | ||
283 | status = gpio_direction_output(ETH_KS8851_QUART, 1); | |
284 | if (status) { | |
285 | pr_err("Cannot set output GPIO %d\n", ETH_KS8851_QUART); | |
286 | goto error3; | |
287 | } | |
288 | ||
289 | status = gpio_direction_input(ETH_KS8851_IRQ); | |
290 | if (status) { | |
291 | pr_err("Cannot set input GPIO %d\n", ETH_KS8851_IRQ); | |
292 | goto error3; | |
293 | } | |
294 | ||
295 | return 0; | |
296 | ||
297 | error3: | |
298 | gpio_free(ETH_KS8851_IRQ); | |
299 | error2: | |
300 | gpio_free(ETH_KS8851_QUART); | |
301 | error1: | |
302 | gpio_free(ETH_KS8851_POWER_ON); | |
303 | return status; | |
304 | } | |
305 | ||
46ba0abf SS |
306 | static struct platform_device sdp4430_lcd_device = { |
307 | .name = "sdp4430_lcd", | |
308 | .id = -1, | |
309 | }; | |
310 | ||
311 | static struct platform_device *sdp4430_devices[] __initdata = { | |
312 | &sdp4430_lcd_device, | |
94ce7a66 | 313 | &sdp4430_gpio_keys_device, |
509b6d93 | 314 | &sdp4430_leds_gpio, |
f389f4cb | 315 | &sdp4430_leds_pwm, |
46ba0abf SS |
316 | }; |
317 | ||
46ba0abf SS |
318 | static struct omap_lcd_config sdp4430_lcd_config __initdata = { |
319 | .ctrl_name = "internal", | |
320 | }; | |
321 | ||
322 | static struct omap_board_config_kernel sdp4430_config[] __initdata = { | |
46ba0abf SS |
323 | { OMAP_TAG_LCD, &sdp4430_lcd_config }, |
324 | }; | |
325 | ||
3dc3bad6 | 326 | static void __init omap_4430sdp_init_early(void) |
46ba0abf | 327 | { |
5b7815b5 SS |
328 | omap_board_config = sdp4430_config; |
329 | omap_board_config_size = ARRAY_SIZE(sdp4430_config); | |
4805734b PW |
330 | omap2_init_common_infrastructure(); |
331 | omap2_init_common_devices(NULL, NULL); | |
46ba0abf SS |
332 | #ifdef CONFIG_OMAP_32K_TIMER |
333 | omap2_gp_clockevent_set_gptimer(1); | |
334 | #endif | |
46ba0abf SS |
335 | } |
336 | ||
bce06683 MM |
337 | static struct omap_musb_board_data musb_board_data = { |
338 | .interface_type = MUSB_INTERFACE_UTMI, | |
09e72002 | 339 | .mode = MUSB_OTG, |
bce06683 MM |
340 | .power = 100, |
341 | }; | |
717c1fbf | 342 | |
e70357e3 HH |
343 | static struct twl4030_usb_data omap4_usbphy_data = { |
344 | .phy_init = omap4430_phy_init, | |
345 | .phy_exit = omap4430_phy_exit, | |
346 | .phy_power = omap4430_phy_power, | |
347 | .phy_set_clock = omap4430_phy_set_clk, | |
348 | }; | |
349 | ||
717c1fbf | 350 | static struct omap2_hsmmc_info mmc[] = { |
6e30a7db | 351 | { |
717c1fbf | 352 | .mmc = 1, |
3a63833e | 353 | .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, |
717c1fbf | 354 | .gpio_wp = -EINVAL, |
6e30a7db B |
355 | }, |
356 | { | |
717c1fbf | 357 | .mmc = 2, |
3a63833e | 358 | .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, |
717c1fbf | 359 | .gpio_cd = -EINVAL, |
360 | .gpio_wp = -EINVAL, | |
361 | .nonremovable = true, | |
64be9782 | 362 | .ocr_mask = MMC_VDD_29_30, |
6e30a7db | 363 | }, |
717c1fbf | 364 | {} /* Terminator */ |
365 | }; | |
366 | ||
5026391c | 367 | static struct regulator_consumer_supply sdp4430_vaux_supply[] = { |
6e30a7db B |
368 | { |
369 | .supply = "vmmc", | |
5026391c | 370 | .dev_name = "mmci-omap-hs.1", |
6e30a7db | 371 | }, |
5026391c SS |
372 | }; |
373 | static struct regulator_consumer_supply sdp4430_vmmc_supply[] = { | |
6e30a7db B |
374 | { |
375 | .supply = "vmmc", | |
5026391c | 376 | .dev_name = "mmci-omap-hs.0", |
6e30a7db B |
377 | }, |
378 | }; | |
379 | ||
717c1fbf | 380 | static int omap4_twl6030_hsmmc_late_init(struct device *dev) |
381 | { | |
382 | int ret = 0; | |
383 | struct platform_device *pdev = container_of(dev, | |
384 | struct platform_device, dev); | |
385 | struct omap_mmc_platform_data *pdata = dev->platform_data; | |
386 | ||
387 | /* Setting MMC1 Card detect Irq */ | |
72f2e2c7 | 388 | if (pdev->id == 0) { |
389 | ret = twl6030_mmc_card_detect_config(); | |
390 | if (ret) | |
391 | pr_err("Failed configuring MMC1 card detect\n"); | |
717c1fbf | 392 | pdata->slots[0].card_detect_irq = TWL6030_IRQ_BASE + |
393 | MMCDETECT_INTR_OFFSET; | |
72f2e2c7 | 394 | pdata->slots[0].card_detect = twl6030_mmc_card_detect; |
395 | } | |
717c1fbf | 396 | return ret; |
397 | } | |
398 | ||
399 | static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev) | |
400 | { | |
531c21ba | 401 | struct omap_mmc_platform_data *pdata; |
717c1fbf | 402 | |
531c21ba BC |
403 | /* dev can be null if CONFIG_MMC_OMAP_HS is not set */ |
404 | if (!dev) { | |
405 | pr_err("Failed %s\n", __func__); | |
406 | return; | |
407 | } | |
408 | pdata = dev->platform_data; | |
717c1fbf | 409 | pdata->init = omap4_twl6030_hsmmc_late_init; |
410 | } | |
411 | ||
412 | static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers) | |
413 | { | |
414 | struct omap2_hsmmc_info *c; | |
415 | ||
416 | omap2_hsmmc_init(controllers); | |
417 | for (c = controllers; c->mmc; c++) | |
418 | omap4_twl6030_hsmmc_set_late_init(c->dev); | |
419 | ||
420 | return 0; | |
421 | } | |
422 | ||
6e30a7db B |
423 | static struct regulator_init_data sdp4430_vaux1 = { |
424 | .constraints = { | |
425 | .min_uV = 1000000, | |
426 | .max_uV = 3000000, | |
427 | .apply_uV = true, | |
428 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
429 | | REGULATOR_MODE_STANDBY, | |
430 | .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | |
431 | | REGULATOR_CHANGE_MODE | |
432 | | REGULATOR_CHANGE_STATUS, | |
433 | }, | |
5026391c SS |
434 | .num_consumer_supplies = 1, |
435 | .consumer_supplies = sdp4430_vaux_supply, | |
6e30a7db B |
436 | }; |
437 | ||
438 | static struct regulator_init_data sdp4430_vaux2 = { | |
439 | .constraints = { | |
440 | .min_uV = 1200000, | |
441 | .max_uV = 2800000, | |
442 | .apply_uV = true, | |
443 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
444 | | REGULATOR_MODE_STANDBY, | |
445 | .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | |
446 | | REGULATOR_CHANGE_MODE | |
447 | | REGULATOR_CHANGE_STATUS, | |
448 | }, | |
449 | }; | |
450 | ||
451 | static struct regulator_init_data sdp4430_vaux3 = { | |
452 | .constraints = { | |
453 | .min_uV = 1000000, | |
454 | .max_uV = 3000000, | |
455 | .apply_uV = true, | |
456 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
457 | | REGULATOR_MODE_STANDBY, | |
458 | .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | |
459 | | REGULATOR_CHANGE_MODE | |
460 | | REGULATOR_CHANGE_STATUS, | |
461 | }, | |
462 | }; | |
463 | ||
464 | /* VMMC1 for MMC1 card */ | |
465 | static struct regulator_init_data sdp4430_vmmc = { | |
466 | .constraints = { | |
467 | .min_uV = 1200000, | |
468 | .max_uV = 3000000, | |
469 | .apply_uV = true, | |
470 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
471 | | REGULATOR_MODE_STANDBY, | |
472 | .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | |
473 | | REGULATOR_CHANGE_MODE | |
474 | | REGULATOR_CHANGE_STATUS, | |
475 | }, | |
5026391c | 476 | .num_consumer_supplies = 1, |
6e30a7db B |
477 | .consumer_supplies = sdp4430_vmmc_supply, |
478 | }; | |
479 | ||
480 | static struct regulator_init_data sdp4430_vpp = { | |
481 | .constraints = { | |
482 | .min_uV = 1800000, | |
483 | .max_uV = 2500000, | |
484 | .apply_uV = true, | |
485 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
486 | | REGULATOR_MODE_STANDBY, | |
487 | .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | |
488 | | REGULATOR_CHANGE_MODE | |
489 | | REGULATOR_CHANGE_STATUS, | |
490 | }, | |
491 | }; | |
492 | ||
493 | static struct regulator_init_data sdp4430_vusim = { | |
494 | .constraints = { | |
495 | .min_uV = 1200000, | |
496 | .max_uV = 2900000, | |
497 | .apply_uV = true, | |
498 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
499 | | REGULATOR_MODE_STANDBY, | |
500 | .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | |
501 | | REGULATOR_CHANGE_MODE | |
502 | | REGULATOR_CHANGE_STATUS, | |
503 | }, | |
504 | }; | |
505 | ||
506 | static struct regulator_init_data sdp4430_vana = { | |
507 | .constraints = { | |
508 | .min_uV = 2100000, | |
509 | .max_uV = 2100000, | |
6e30a7db B |
510 | .valid_modes_mask = REGULATOR_MODE_NORMAL |
511 | | REGULATOR_MODE_STANDBY, | |
512 | .valid_ops_mask = REGULATOR_CHANGE_MODE | |
513 | | REGULATOR_CHANGE_STATUS, | |
514 | }, | |
515 | }; | |
516 | ||
517 | static struct regulator_init_data sdp4430_vcxio = { | |
518 | .constraints = { | |
519 | .min_uV = 1800000, | |
520 | .max_uV = 1800000, | |
6e30a7db B |
521 | .valid_modes_mask = REGULATOR_MODE_NORMAL |
522 | | REGULATOR_MODE_STANDBY, | |
523 | .valid_ops_mask = REGULATOR_CHANGE_MODE | |
524 | | REGULATOR_CHANGE_STATUS, | |
525 | }, | |
526 | }; | |
527 | ||
528 | static struct regulator_init_data sdp4430_vdac = { | |
529 | .constraints = { | |
530 | .min_uV = 1800000, | |
531 | .max_uV = 1800000, | |
6e30a7db B |
532 | .valid_modes_mask = REGULATOR_MODE_NORMAL |
533 | | REGULATOR_MODE_STANDBY, | |
534 | .valid_ops_mask = REGULATOR_CHANGE_MODE | |
535 | | REGULATOR_CHANGE_STATUS, | |
536 | }, | |
537 | }; | |
538 | ||
539 | static struct regulator_init_data sdp4430_vusb = { | |
540 | .constraints = { | |
541 | .min_uV = 3300000, | |
542 | .max_uV = 3300000, | |
543 | .apply_uV = true, | |
544 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
545 | | REGULATOR_MODE_STANDBY, | |
546 | .valid_ops_mask = REGULATOR_CHANGE_MODE | |
547 | | REGULATOR_CHANGE_STATUS, | |
548 | }, | |
549 | }; | |
550 | ||
551 | static struct twl4030_platform_data sdp4430_twldata = { | |
552 | .irq_base = TWL6030_IRQ_BASE, | |
553 | .irq_end = TWL6030_IRQ_END, | |
554 | ||
555 | /* Regulators */ | |
556 | .vmmc = &sdp4430_vmmc, | |
557 | .vpp = &sdp4430_vpp, | |
558 | .vusim = &sdp4430_vusim, | |
559 | .vana = &sdp4430_vana, | |
560 | .vcxio = &sdp4430_vcxio, | |
561 | .vdac = &sdp4430_vdac, | |
562 | .vusb = &sdp4430_vusb, | |
563 | .vaux1 = &sdp4430_vaux1, | |
564 | .vaux2 = &sdp4430_vaux2, | |
565 | .vaux3 = &sdp4430_vaux3, | |
e70357e3 | 566 | .usb = &omap4_usbphy_data |
6e30a7db B |
567 | }; |
568 | ||
569 | static struct i2c_board_info __initdata sdp4430_i2c_boardinfo[] = { | |
570 | { | |
571 | I2C_BOARD_INFO("twl6030", 0x48), | |
572 | .flags = I2C_CLIENT_WAKE, | |
573 | .irq = OMAP44XX_IRQ_SYS_1N, | |
574 | .platform_data = &sdp4430_twldata, | |
575 | }, | |
576 | }; | |
83078f9b SD |
577 | static struct i2c_board_info __initdata sdp4430_i2c_3_boardinfo[] = { |
578 | { | |
579 | I2C_BOARD_INFO("tmp105", 0x48), | |
580 | }, | |
d048aca2 H |
581 | { |
582 | I2C_BOARD_INFO("bh1780", 0x29), | |
583 | }, | |
83078f9b | 584 | }; |
0df891bb SD |
585 | static struct i2c_board_info __initdata sdp4430_i2c_4_boardinfo[] = { |
586 | { | |
587 | I2C_BOARD_INFO("hmc5843", 0x1e), | |
588 | }, | |
589 | }; | |
baeb73e8 SS |
590 | static int __init omap4_i2c_init(void) |
591 | { | |
592 | /* | |
593 | * Phoenix Audio IC needs I2C1 to | |
594 | * start with 400 KHz or less | |
595 | */ | |
6e30a7db B |
596 | omap_register_i2c_bus(1, 400, sdp4430_i2c_boardinfo, |
597 | ARRAY_SIZE(sdp4430_i2c_boardinfo)); | |
baeb73e8 | 598 | omap_register_i2c_bus(2, 400, NULL, 0); |
83078f9b SD |
599 | omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo, |
600 | ARRAY_SIZE(sdp4430_i2c_3_boardinfo)); | |
0df891bb SD |
601 | omap_register_i2c_bus(4, 400, sdp4430_i2c_4_boardinfo, |
602 | ARRAY_SIZE(sdp4430_i2c_4_boardinfo)); | |
baeb73e8 SS |
603 | return 0; |
604 | } | |
94ce7a66 SD |
605 | |
606 | static void __init omap_sfh7741prox_init(void) | |
607 | { | |
608 | int error; | |
609 | ||
610 | error = gpio_request(OMAP4_SFH7741_ENABLE_GPIO, "sfh7741"); | |
611 | if (error < 0) { | |
612 | pr_err("%s:failed to request GPIO %d, error %d\n", | |
613 | __func__, OMAP4_SFH7741_ENABLE_GPIO, error); | |
614 | return; | |
615 | } | |
616 | ||
617 | error = gpio_direction_output(OMAP4_SFH7741_ENABLE_GPIO , 0); | |
618 | if (error < 0) { | |
619 | pr_err("%s: GPIO configuration failed: GPIO %d,error %d\n", | |
620 | __func__, OMAP4_SFH7741_ENABLE_GPIO, error); | |
621 | gpio_free(OMAP4_SFH7741_ENABLE_GPIO); | |
622 | } | |
623 | } | |
624 | ||
fb6bf632 BC |
625 | #ifdef CONFIG_OMAP_MUX |
626 | static struct omap_board_mux board_mux[] __initdata = { | |
7d4ca85a | 627 | OMAP4_MUX(USBB2_ULPITLL_CLK, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), |
fb6bf632 BC |
628 | { .reg_offset = OMAP_MUX_TERMINATOR }, |
629 | }; | |
630 | #else | |
631 | #define board_mux NULL | |
632 | #endif | |
633 | ||
46ba0abf SS |
634 | static void __init omap_4430sdp_init(void) |
635 | { | |
b2aa5e57 | 636 | int status; |
6fea7b0a BC |
637 | int package = OMAP_PACKAGE_CBS; |
638 | ||
639 | if (omap_rev() == OMAP4430_REV_ES1_0) | |
640 | package = OMAP_PACKAGE_CBL; | |
641 | omap4_mux_init(board_mux, package); | |
b2aa5e57 | 642 | |
baeb73e8 | 643 | omap4_i2c_init(); |
94ce7a66 | 644 | omap_sfh7741prox_init(); |
46ba0abf | 645 | platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices)); |
46ba0abf | 646 | omap_serial_init(); |
717c1fbf | 647 | omap4_twl6030_hsmmc_init(mmc); |
6aa85a5a | 648 | |
46960847 | 649 | usb_musb_init(&musb_board_data); |
b2aa5e57 AA |
650 | |
651 | status = omap_ethernet_init(); | |
652 | if (status) { | |
653 | pr_err("Ethernet initialization failed: %d\n", status); | |
654 | } else { | |
655 | sdp4430_spi_board_info[0].irq = gpio_to_irq(ETH_KS8851_IRQ); | |
656 | spi_register_board_info(sdp4430_spi_board_info, | |
657 | ARRAY_SIZE(sdp4430_spi_board_info)); | |
658 | } | |
59556765 SR |
659 | |
660 | status = omap4_keyboard_init(&sdp4430_keypad_data); | |
661 | if (status) | |
662 | pr_err("Keypad initialization failed: %d\n", status); | |
46ba0abf SS |
663 | } |
664 | ||
665 | static void __init omap_4430sdp_map_io(void) | |
666 | { | |
667 | omap2_set_globals_443x(); | |
6fbd55d0 | 668 | omap44xx_map_common_io(); |
46ba0abf SS |
669 | } |
670 | ||
671 | MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board") | |
672 | /* Maintainer: Santosh Shilimkar - Texas Instruments Inc */ | |
46ba0abf | 673 | .boot_params = 0x80000100, |
71ee7dad | 674 | .reserve = omap_reserve, |
3dc3bad6 RKAL |
675 | .map_io = omap_4430sdp_map_io, |
676 | .init_early = omap_4430sdp_init_early, | |
677 | .init_irq = gic_init_irq, | |
46ba0abf SS |
678 | .init_machine = omap_4430sdp_init, |
679 | .timer = &omap_timer, | |
680 | MACHINE_END |