[deliverable/linux.git] / arch / arm / mach-omap2 / board-cm-t3517.c

/*
 * linux/arch/arm/mach-omap2/board-cm-t3517.c
 *
 * Support for the CompuLab CM-T3517 modules
 *
 * Copyright (C) 2010 CompuLab, Ltd.
 * Author: Igor Grinberg <grinberg@compulab.co.il>
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
 * 02110-1301 USA
 *
 */

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/rtc-v3020.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/can/platform/ti_hecc.h>

#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>

#include <plat/board.h>
#include <plat/common.h>
#include <plat/usb.h>
#include <plat/nand.h>
#include <plat/gpmc.h>

#include <mach/am35xx.h>

#include "mux.h"
#include "control.h"
#include "common-board-devices.h"

#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
static struct gpio_led cm_t3517_leds[] = {
	[0] = {
		.gpio			= 186,
		.name			= "cm-t3517:green",
		.default_trigger	= "heartbeat",
		.active_low		= 0,
	},
};

static struct gpio_led_platform_data cm_t3517_led_pdata = {
	.num_leds	= ARRAY_SIZE(cm_t3517_leds),
	.leds		= cm_t3517_leds,
};

static struct platform_device cm_t3517_led_device = {
	.name		= "leds-gpio",
	.id		= -1,
	.dev		= {
		.platform_data	= &cm_t3517_led_pdata,
	},
};

static void __init cm_t3517_init_leds(void)
{
	platform_device_register(&cm_t3517_led_device);
}
#else
static inline void cm_t3517_init_leds(void) {}
#endif

#if defined(CONFIG_CAN_TI_HECC) || defined(CONFIG_CAN_TI_HECC_MODULE)
static struct resource cm_t3517_hecc_resources[] = {
	{
		.start	= AM35XX_IPSS_HECC_BASE,
		.end	= AM35XX_IPSS_HECC_BASE + SZ_16K - 1,
		.flags	= IORESOURCE_MEM,
	},
	{
		.start	= INT_35XX_HECC0_IRQ,
		.end	= INT_35XX_HECC0_IRQ,
		.flags	= IORESOURCE_IRQ,
	},
};

static struct ti_hecc_platform_data cm_t3517_hecc_pdata = {
	.scc_hecc_offset	= AM35XX_HECC_SCC_HECC_OFFSET,
	.scc_ram_offset		= AM35XX_HECC_SCC_RAM_OFFSET,
	.hecc_ram_offset	= AM35XX_HECC_RAM_OFFSET,
	.mbx_offset		= AM35XX_HECC_MBOX_OFFSET,
	.int_line		= AM35XX_HECC_INT_LINE,
	.version		= AM35XX_HECC_VERSION,
};

static struct platform_device cm_t3517_hecc_device = {
	.name		= "ti_hecc",
	.id		= 1,
	.num_resources	= ARRAY_SIZE(cm_t3517_hecc_resources),
	.resource	= cm_t3517_hecc_resources,
	.dev		= {
		.platform_data	= &cm_t3517_hecc_pdata,
	},
};

static void cm_t3517_init_hecc(void)
{
	platform_device_register(&cm_t3517_hecc_device);
}
#else
static inline void cm_t3517_init_hecc(void) {}
#endif

#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
#define RTC_IO_GPIO		(153)
#define RTC_WR_GPIO		(154)
#define RTC_RD_GPIO		(53)
#define RTC_CS_GPIO		(163)
#define RTC_CS_EN_GPIO		(160)

struct v3020_platform_data cm_t3517_v3020_pdata = {
	.use_gpio	= 1,
	.gpio_cs	= RTC_CS_GPIO,
	.gpio_wr	= RTC_WR_GPIO,
	.gpio_rd	= RTC_RD_GPIO,
	.gpio_io	= RTC_IO_GPIO,
};

static struct platform_device cm_t3517_rtc_device = {
	.name		= "v3020",
	.id		= -1,
	.dev		= {
		.platform_data = &cm_t3517_v3020_pdata,
	}
};

static void __init cm_t3517_init_rtc(void)
{
	int err;

	err = gpio_request_one(RTC_CS_EN_GPIO, GPIOF_OUT_INIT_HIGH,
			       "rtc cs en");
	if (err) {
		pr_err("CM-T3517: rtc cs en gpio request failed: %d\n", err);
		return;
	}

	platform_device_register(&cm_t3517_rtc_device);
}
#else
static inline void cm_t3517_init_rtc(void) {}
#endif

#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE)
#define HSUSB1_RESET_GPIO	(146)
#define HSUSB2_RESET_GPIO	(147)
#define USB_HUB_RESET_GPIO	(152)

static struct usbhs_omap_board_data cm_t3517_ehci_pdata __initdata = {
	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,

	.phy_reset  = true,
	.reset_gpio_port[0]  = HSUSB1_RESET_GPIO,
	.reset_gpio_port[1]  = HSUSB2_RESET_GPIO,
	.reset_gpio_port[2]  = -EINVAL,
};

static int __init cm_t3517_init_usbh(void)
{
	int err;

	err = gpio_request_one(USB_HUB_RESET_GPIO, GPIOF_OUT_INIT_LOW,
			       "usb hub rst");
	if (err) {
		pr_err("CM-T3517: usb hub rst gpio request failed: %d\n", err);
	} else {
		udelay(10);
		gpio_set_value(USB_HUB_RESET_GPIO, 1);
		msleep(1);
	}

	usbhs_init(&cm_t3517_ehci_pdata);

	return 0;
}
#else
static inline int cm_t3517_init_usbh(void)
{
	return 0;
}
#endif

#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
static struct mtd_partition cm_t3517_nand_partitions[] = {
	{
		.name           = "xloader",
		.offset         = 0,			/* Offset = 0x00000 */
		.size           = 4 * NAND_BLOCK_SIZE,
		.mask_flags     = MTD_WRITEABLE
	},
	{
		.name           = "uboot",
		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
		.size           = 15 * NAND_BLOCK_SIZE,
	},
	{
		.name           = "uboot environment",
		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x260000 */
		.size           = 2 * NAND_BLOCK_SIZE,
	},
	{
		.name           = "linux",
		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x2A0000 */
		.size           = 32 * NAND_BLOCK_SIZE,
	},
	{
		.name           = "rootfs",
		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x6A0000 */
		.size           = MTDPART_SIZ_FULL,
	},
};

static struct omap_nand_platform_data cm_t3517_nand_data = {
	.parts			= cm_t3517_nand_partitions,
	.nr_parts		= ARRAY_SIZE(cm_t3517_nand_partitions),
	.cs			= 0,
};

static void __init cm_t3517_init_nand(void)
{
	if (gpmc_nand_init(&cm_t3517_nand_data) < 0)
		pr_err("CM-T3517: NAND initialization failed\n");
}
#else
static inline void cm_t3517_init_nand(void) {}
#endif

static struct omap_board_config_kernel cm_t3517_config[] __initdata = {
};

static void __init cm_t3517_init_early(void)
{
	omap2_init_common_infrastructure();
	omap2_init_common_devices(NULL, NULL);
}

#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
	/* GPIO186 - Green LED */
	OMAP3_MUX(SYS_CLKOUT2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),

	/* RTC GPIOs: */
	/* IO - GPIO153 */
	OMAP3_MUX(MCBSP4_DR, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
	/* WR# - GPIO154 */
	OMAP3_MUX(MCBSP4_DX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
	/* RD# - GPIO53 */
	OMAP3_MUX(GPMC_NCS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
	/* CS# - GPIO163 */
	OMAP3_MUX(UART3_CTS_RCTX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
	/* CS EN - GPIO160 */
	OMAP3_MUX(MCBSP_CLKS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),

	/* HSUSB1 RESET */
	OMAP3_MUX(UART2_TX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
	/* HSUSB2 RESET */
	OMAP3_MUX(UART2_RX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
	/* CM-T3517 USB HUB nRESET */
	OMAP3_MUX(MCBSP4_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),

	{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#endif

static void __init cm_t3517_init(void)
{
	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
	omap_serial_init();
	omap_board_config = cm_t3517_config;
	omap_board_config_size = ARRAY_SIZE(cm_t3517_config);
	cm_t3517_init_leds();
	cm_t3517_init_nand();
	cm_t3517_init_rtc();
	cm_t3517_init_usbh();
	cm_t3517_init_hecc();
}

MACHINE_START(CM_T3517, "Compulab CM-T3517")
	.boot_params	= 0x80000100,
	.reserve        = omap_reserve,
	.map_io		= omap3_map_io,
	.init_early	= cm_t3517_init_early,
	.init_irq	= omap3_init_irq,
	.init_machine	= cm_t3517_init,
	.timer		= &omap3_timer,
MACHINE_END
Commit	Line	Data
d04b620e IG	1	/*
	2	* linux/arch/arm/mach-omap2/board-cm-t3517.c
	3	*
	4	* Support for the CompuLab CM-T3517 modules
	5	*
	6	* Copyright (C) 2010 CompuLab, Ltd.
	7	* Author: Igor Grinberg <grinberg@compulab.co.il>
	8	*
	9	* This program is free software; you can redistribute it and/or
	10	* modify it under the terms of the GNU General Public License
	11	* version 2 as published by the Free Software Foundation.
	12	*
	13	* This program is distributed in the hope that it will be useful, but
	14	* WITHOUT ANY WARRANTY; without even the implied warranty of
	15	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
	16	* General Public License for more details.
	17	*
	18	* You should have received a copy of the GNU General Public License
	19	* along with this program; if not, write to the Free Software
	20	* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
	21	* 02110-1301 USA
	22	*
	23	*/
	24
	25	#include <linux/kernel.h>
	26	#include <linux/init.h>
	27	#include <linux/platform_device.h>
525d75b3	28	#include <linux/delay.h>
d04b620e IG	29	#include <linux/gpio.h>
d04b620e IG	30	#include <linux/leds.h>
46893a56	31	#include <linux/rtc-v3020.h>
ec34fccd IG	32	#include <linux/mtd/mtd.h>
	33	#include <linux/mtd/nand.h>
	34	#include <linux/mtd/partitions.h>
b6a26b4b	35	#include <linux/can/platform/ti_hecc.h>
d04b620e IG	36
	37	#include <asm/mach-types.h>
	38	#include <asm/mach/arch.h>
	39	#include <asm/mach/map.h>
	40
	41	#include <plat/board.h>
	42	#include <plat/common.h>
525d75b3	43	#include <plat/usb.h>
ec34fccd IG	44	#include <plat/nand.h>
ec34fccd IG	45	#include <plat/gpmc.h>
d04b620e	46
b6a26b4b IG	47	#include <mach/am35xx.h>
b6a26b4b IG	48
d04b620e	49	#include "mux.h"
4814ced5	50	#include "control.h"
1704bf15	51	#include "common-board-devices.h"
d04b620e IG	52
	53	#if defined(CONFIG_LEDS_GPIO) \|\| defined(CONFIG_LEDS_GPIO_MODULE)
	54	static struct gpio_led cm_t3517_leds[] = {
	55	[0] = {
	56	.gpio = 186,
	57	.name = "cm-t3517:green",
	58	.default_trigger = "heartbeat",
	59	.active_low = 0,
	60	},
	61	};
	62
	63	static struct gpio_led_platform_data cm_t3517_led_pdata = {
	64	.num_leds = ARRAY_SIZE(cm_t3517_leds),
	65	.leds = cm_t3517_leds,
	66	};
	67
	68	static struct platform_device cm_t3517_led_device = {
	69	.name = "leds-gpio",
	70	.id = -1,
	71	.dev = {
	72	.platform_data = &cm_t3517_led_pdata,
	73	},
	74	};
	75
	76	static void __init cm_t3517_init_leds(void)
	77	{
	78	platform_device_register(&cm_t3517_led_device);
	79	}
	80	#else
	81	static inline void cm_t3517_init_leds(void) {}
	82	#endif
	83
b6a26b4b IG	84	#if defined(CONFIG_CAN_TI_HECC) \|\| defined(CONFIG_CAN_TI_HECC_MODULE)
	85	static struct resource cm_t3517_hecc_resources[] = {
	86	{
	87	.start = AM35XX_IPSS_HECC_BASE,
	88	.end = AM35XX_IPSS_HECC_BASE + SZ_16K - 1,
	89	.flags = IORESOURCE_MEM,
	90	},
	91	{
	92	.start = INT_35XX_HECC0_IRQ,
	93	.end = INT_35XX_HECC0_IRQ,
	94	.flags = IORESOURCE_IRQ,
	95	},
	96	};
	97
	98	static struct ti_hecc_platform_data cm_t3517_hecc_pdata = {
	99	.scc_hecc_offset = AM35XX_HECC_SCC_HECC_OFFSET,
	100	.scc_ram_offset = AM35XX_HECC_SCC_RAM_OFFSET,
	101	.hecc_ram_offset = AM35XX_HECC_RAM_OFFSET,
	102	.mbx_offset = AM35XX_HECC_MBOX_OFFSET,
	103	.int_line = AM35XX_HECC_INT_LINE,
	104	.version = AM35XX_HECC_VERSION,
	105	};
	106
	107	static struct platform_device cm_t3517_hecc_device = {
	108	.name = "ti_hecc",
	109	.id = 1,
	110	.num_resources = ARRAY_SIZE(cm_t3517_hecc_resources),
	111	.resource = cm_t3517_hecc_resources,
	112	.dev = {
	113	.platform_data = &cm_t3517_hecc_pdata,
	114	},
	115	};
	116
	117	static void cm_t3517_init_hecc(void)
	118	{
	119	platform_device_register(&cm_t3517_hecc_device);
	120	}
	121	#else
	122	static inline void cm_t3517_init_hecc(void) {}
	123	#endif
	124
46893a56 IG	125	#if defined(CONFIG_RTC_DRV_V3020) \|\| defined(CONFIG_RTC_DRV_V3020_MODULE)
	126	#define RTC_IO_GPIO (153)
	127	#define RTC_WR_GPIO (154)
fec5568c	128	#define RTC_RD_GPIO (53)
46893a56	129	#define RTC_CS_GPIO (163)
fec5568c	130	#define RTC_CS_EN_GPIO (160)
46893a56 IG	131
	132	struct v3020_platform_data cm_t3517_v3020_pdata = {
	133	.use_gpio = 1,
	134	.gpio_cs = RTC_CS_GPIO,
	135	.gpio_wr = RTC_WR_GPIO,
	136	.gpio_rd = RTC_RD_GPIO,
	137	.gpio_io = RTC_IO_GPIO,
	138	};
	139
	140	static struct platform_device cm_t3517_rtc_device = {
	141	.name = "v3020",
	142	.id = -1,
	143	.dev = {
	144	.platform_data = &cm_t3517_v3020_pdata,
	145	}
	146	};
	147
	148	static void __init cm_t3517_init_rtc(void)
	149	{
fec5568c IG	150	int err;
fec5568c IG	151
bc593f5d IG	152	err = gpio_request_one(RTC_CS_EN_GPIO, GPIOF_OUT_INIT_HIGH,
bc593f5d IG	153	"rtc cs en");
fec5568c IG	154	if (err) {
	155	pr_err("CM-T3517: rtc cs en gpio request failed: %d\n", err);
	156	return;
	157	}
	158
46893a56 IG	159	platform_device_register(&cm_t3517_rtc_device);
	160	}
	161	#else
	162	static inline void cm_t3517_init_rtc(void) {}
	163	#endif
d04b620e	164
525d75b3 IG	165	#if defined(CONFIG_USB_EHCI_HCD) \|\| defined(CONFIG_USB_EHCI_HCD_MODULE)
	166	#define HSUSB1_RESET_GPIO (146)
	167	#define HSUSB2_RESET_GPIO (147)
	168	#define USB_HUB_RESET_GPIO (152)
	169
181b250c KM	170	static struct usbhs_omap_board_data cm_t3517_ehci_pdata __initdata = {
	171	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
	172	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
	173	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
525d75b3 IG	174
	175	.phy_reset = true,
	176	.reset_gpio_port[0] = HSUSB1_RESET_GPIO,
	177	.reset_gpio_port[1] = HSUSB2_RESET_GPIO,
	178	.reset_gpio_port[2] = -EINVAL,
	179	};
	180
026fe79d	181	static int __init cm_t3517_init_usbh(void)
525d75b3 IG	182	{
	183	int err;
	184
bc593f5d IG	185	err = gpio_request_one(USB_HUB_RESET_GPIO, GPIOF_OUT_INIT_LOW,
bc593f5d IG	186	"usb hub rst");
525d75b3 IG	187	if (err) {
	188	pr_err("CM-T3517: usb hub rst gpio request failed: %d\n", err);
	189	} else {
525d75b3 IG	190	udelay(10);
	191	gpio_set_value(USB_HUB_RESET_GPIO, 1);
	192	msleep(1);
	193	}
	194
9e64bb1e	195	usbhs_init(&cm_t3517_ehci_pdata);
525d75b3 IG	196
	197	return 0;
	198	}
	199	#else
	200	static inline int cm_t3517_init_usbh(void)
	201	{
	202	return 0;
	203	}
	204	#endif
	205
ec34fccd	206	#if defined(CONFIG_MTD_NAND_OMAP2) \|\| defined(CONFIG_MTD_NAND_OMAP2_MODULE)
ec34fccd IG	207	static struct mtd_partition cm_t3517_nand_partitions[] = {
	208	{
	209	.name = "xloader",
	210	.offset = 0, /* Offset = 0x00000 */
	211	.size = 4 * NAND_BLOCK_SIZE,
	212	.mask_flags = MTD_WRITEABLE
	213	},
	214	{
	215	.name = "uboot",
	216	.offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
	217	.size = 15 * NAND_BLOCK_SIZE,
	218	},
	219	{
	220	.name = "uboot environment",
	221	.offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */
	222	.size = 2 * NAND_BLOCK_SIZE,
	223	},
	224	{
	225	.name = "linux",
2216b436	226	.offset = MTDPART_OFS_APPEND, /* Offset = 0x2A0000 */
ec34fccd IG	227	.size = 32 * NAND_BLOCK_SIZE,
	228	},
	229	{
	230	.name = "rootfs",
2216b436	231	.offset = MTDPART_OFS_APPEND, /* Offset = 0x6A0000 */
ec34fccd IG	232	.size = MTDPART_SIZ_FULL,
	233	},
	234	};
	235
	236	static struct omap_nand_platform_data cm_t3517_nand_data = {
	237	.parts = cm_t3517_nand_partitions,
	238	.nr_parts = ARRAY_SIZE(cm_t3517_nand_partitions),
ec34fccd IG	239	.cs = 0,
	240	};
	241
	242	static void __init cm_t3517_init_nand(void)
	243	{
	244	if (gpmc_nand_init(&cm_t3517_nand_data) < 0)
	245	pr_err("CM-T3517: NAND initialization failed\n");
	246	}
	247	#else
	248	static inline void cm_t3517_init_nand(void) {}
	249	#endif
	250
d04b620e IG	251	static struct omap_board_config_kernel cm_t3517_config[] __initdata = {
	252	};
	253
3dc3bad6	254	static void __init cm_t3517_init_early(void)
d04b620e	255	{
4805734b PW	256	omap2_init_common_infrastructure();
4805734b PW	257	omap2_init_common_devices(NULL, NULL);
d04b620e IG	258	}
d04b620e IG	259
c7ecea24	260	#ifdef CONFIG_OMAP_MUX
d04b620e IG	261	static struct omap_board_mux board_mux[] __initdata = {
	262	/* GPIO186 - Green LED */
	263	OMAP3_MUX(SYS_CLKOUT2, OMAP_MUX_MODE4 \| OMAP_PIN_OUTPUT),
fec5568c IG	264
	265	/* RTC GPIOs: */
	266	/* IO - GPIO153 */
46893a56	267	OMAP3_MUX(MCBSP4_DR, OMAP_MUX_MODE4 \| OMAP_PIN_INPUT),
fec5568c	268	/* WR# - GPIO154 */
46893a56	269	OMAP3_MUX(MCBSP4_DX, OMAP_MUX_MODE4 \| OMAP_PIN_INPUT),
fec5568c IG	270	/* RD# - GPIO53 */
	271	OMAP3_MUX(GPMC_NCS2, OMAP_MUX_MODE4 \| OMAP_PIN_INPUT),
	272	/* CS# - GPIO163 */
46893a56	273	OMAP3_MUX(UART3_CTS_RCTX, OMAP_MUX_MODE4 \| OMAP_PIN_INPUT),
fec5568c IG	274	/* CS EN - GPIO160 */
	275	OMAP3_MUX(MCBSP_CLKS, OMAP_MUX_MODE4 \| OMAP_PIN_INPUT),
	276
525d75b3 IG	277	/* HSUSB1 RESET */
	278	OMAP3_MUX(UART2_TX, OMAP_MUX_MODE4 \| OMAP_PIN_OUTPUT),
	279	/* HSUSB2 RESET */
	280	OMAP3_MUX(UART2_RX, OMAP_MUX_MODE4 \| OMAP_PIN_OUTPUT),
	281	/* CM-T3517 USB HUB nRESET */
	282	OMAP3_MUX(MCBSP4_CLKX, OMAP_MUX_MODE4 \| OMAP_PIN_OUTPUT),
d04b620e IG	283
	284	{ .reg_offset = OMAP_MUX_TERMINATOR },
	285	};
c7ecea24	286	#endif
d04b620e IG	287
	288	static void __init cm_t3517_init(void)
	289	{
	290	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
	291	omap_serial_init();
e41cccfe TL	292	omap_board_config = cm_t3517_config;
e41cccfe TL	293	omap_board_config_size = ARRAY_SIZE(cm_t3517_config);
d04b620e	294	cm_t3517_init_leds();
ec34fccd	295	cm_t3517_init_nand();
46893a56	296	cm_t3517_init_rtc();
525d75b3	297	cm_t3517_init_usbh();
b6a26b4b	298	cm_t3517_init_hecc();
d04b620e IG	299	}
	300
	301	MACHINE_START(CM_T3517, "Compulab CM-T3517")
d04b620e	302	.boot_params = 0x80000100,
d04b620e	303	.reserve = omap_reserve,
3dc3bad6 RKAL	304	.map_io = omap3_map_io,
3dc3bad6 RKAL	305	.init_early = cm_t3517_init_early,
741e3a89	306	.init_irq = omap3_init_irq,
d04b620e	307	.init_machine = cm_t3517_init,
e74984e4	308	.timer = &omap3_timer,
d04b620e	309	MACHINE_END