Commit | Line | Data |
---|---|---|
58e11162 EBS |
1 | /* |
2 | * Copyright (C) 2009 Integration Software and Electronic Engineering. | |
3 | * | |
4 | * Modified from mach-omap2/board-generic.c | |
5 | * | |
6 | * This program is free software; you can redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License version 2 as | |
8 | * published by the Free Software Foundation. | |
9 | */ | |
10 | ||
11 | #include <linux/kernel.h> | |
12 | #include <linux/init.h> | |
13 | #include <linux/platform_device.h> | |
14 | #include <linux/delay.h> | |
15 | #include <linux/err.h> | |
16 | #include <linux/clk.h> | |
17 | #include <linux/io.h> | |
18 | #include <linux/gpio.h> | |
19 | #include <linux/interrupt.h> | |
18cbc7d9 | 20 | #include <linux/input.h> |
58e11162 EBS |
21 | |
22 | #include <linux/regulator/machine.h> | |
da07c0cf | 23 | #include <linux/regulator/fixed.h> |
ebeb53e1 | 24 | #include <linux/i2c/twl.h> |
3a63833e | 25 | #include <linux/mmc/host.h> |
58e11162 EBS |
26 | |
27 | #include <asm/mach-types.h> | |
28 | #include <asm/mach/arch.h> | |
29 | ||
30 | #include <plat/board.h> | |
31 | #include <plat/common.h> | |
32 | #include <plat/gpmc.h> | |
58e11162 | 33 | #include <plat/usb.h> |
691de27f | 34 | #include <plat/display.h> |
89747c91 | 35 | #include <plat/panel-generic-dpi.h> |
cddb483a | 36 | #include <plat/onenand.h> |
58e11162 | 37 | |
ca5742bd | 38 | #include "mux.h" |
d02a900b | 39 | #include "hsmmc.h" |
22f1baac | 40 | #include "sdram-numonyx-m65kxxxxam.h" |
fbd8071c | 41 | #include "common-board-devices.h" |
58e11162 EBS |
42 | |
43 | #define IGEP2_SMSC911X_CS 5 | |
44 | #define IGEP2_SMSC911X_GPIO 176 | |
45 | #define IGEP2_GPIO_USBH_NRESET 24 | |
5a9fcc99 EBS |
46 | #define IGEP2_GPIO_LED0_GREEN 26 |
47 | #define IGEP2_GPIO_LED0_RED 27 | |
48 | #define IGEP2_GPIO_LED1_RED 28 | |
49 | #define IGEP2_GPIO_DVI_PUP 170 | |
50 | ||
51 | #define IGEP2_RB_GPIO_WIFI_NPD 94 | |
52 | #define IGEP2_RB_GPIO_WIFI_NRESET 95 | |
53 | #define IGEP2_RB_GPIO_BT_NRESET 137 | |
54 | #define IGEP2_RC_GPIO_WIFI_NPD 138 | |
55 | #define IGEP2_RC_GPIO_WIFI_NRESET 139 | |
56 | #define IGEP2_RC_GPIO_BT_NRESET 137 | |
58e11162 | 57 | |
3f8c48d9 EBS |
58 | /* |
59 | * IGEP2 Hardware Revision Table | |
60 | * | |
5a9fcc99 EBS |
61 | * -------------------------------------------------------------------------- |
62 | * | Id. | Hw Rev. | HW0 (28) | WIFI_NPD | WIFI_NRESET | BT_NRESET | | |
63 | * -------------------------------------------------------------------------- | |
64 | * | 0 | B | high | gpio94 | gpio95 | - | | |
65 | * | 0 | B/C (B-compatible) | high | gpio94 | gpio95 | gpio137 | | |
66 | * | 1 | C | low | gpio138 | gpio139 | gpio137 | | |
67 | * -------------------------------------------------------------------------- | |
3f8c48d9 EBS |
68 | */ |
69 | ||
70 | #define IGEP2_BOARD_HWREV_B 0 | |
71 | #define IGEP2_BOARD_HWREV_C 1 | |
72 | ||
73 | static u8 hwrev; | |
74 | ||
75 | static void __init igep2_get_revision(void) | |
76 | { | |
77 | u8 ret; | |
78 | ||
79 | omap_mux_init_gpio(IGEP2_GPIO_LED1_RED, OMAP_PIN_INPUT); | |
80 | ||
bc593f5d | 81 | if (gpio_request_one(IGEP2_GPIO_LED1_RED, GPIOF_IN, "GPIO_HW0_REV")) { |
3f8c48d9 EBS |
82 | pr_warning("IGEP2: Could not obtain gpio GPIO_HW0_REV\n"); |
83 | pr_err("IGEP2: Unknown Hardware Revision\n"); | |
bc593f5d IG |
84 | return; |
85 | } | |
86 | ||
87 | ret = gpio_get_value(IGEP2_GPIO_LED1_RED); | |
88 | if (ret == 0) { | |
89 | pr_info("IGEP2: Hardware Revision C (B-NON compatible)\n"); | |
90 | hwrev = IGEP2_BOARD_HWREV_C; | |
91 | } else if (ret == 1) { | |
92 | pr_info("IGEP2: Hardware Revision B/C (B compatible)\n"); | |
93 | hwrev = IGEP2_BOARD_HWREV_B; | |
94 | } else { | |
95 | pr_err("IGEP2: Unknown Hardware Revision\n"); | |
96 | hwrev = -1; | |
3f8c48d9 EBS |
97 | } |
98 | ||
99 | gpio_free(IGEP2_GPIO_LED1_RED); | |
100 | } | |
58e11162 | 101 | |
cddb483a EBS |
102 | #if defined(CONFIG_MTD_ONENAND_OMAP2) || \ |
103 | defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) | |
104 | ||
105 | #define ONENAND_MAP 0x20000000 | |
106 | ||
107 | /* NAND04GR4E1A ( x2 Flash built-in COMBO POP MEMORY ) | |
108 | * Since the device is equipped with two DataRAMs, and two-plane NAND | |
109 | * Flash memory array, these two component enables simultaneous program | |
110 | * of 4KiB. Plane1 has only even blocks such as block0, block2, block4 | |
111 | * while Plane2 has only odd blocks such as block1, block3, block5. | |
112 | * So MTD regards it as 4KiB page size and 256KiB block size 64*(2*2048) | |
113 | */ | |
114 | ||
fdfb03ba | 115 | static struct mtd_partition igep_onenand_partitions[] = { |
cddb483a EBS |
116 | { |
117 | .name = "X-Loader", | |
118 | .offset = 0, | |
119 | .size = 2 * (64*(2*2048)) | |
120 | }, | |
121 | { | |
122 | .name = "U-Boot", | |
123 | .offset = MTDPART_OFS_APPEND, | |
124 | .size = 6 * (64*(2*2048)), | |
125 | }, | |
126 | { | |
127 | .name = "Environment", | |
128 | .offset = MTDPART_OFS_APPEND, | |
129 | .size = 2 * (64*(2*2048)), | |
130 | }, | |
131 | { | |
132 | .name = "Kernel", | |
133 | .offset = MTDPART_OFS_APPEND, | |
134 | .size = 12 * (64*(2*2048)), | |
135 | }, | |
136 | { | |
137 | .name = "File System", | |
138 | .offset = MTDPART_OFS_APPEND, | |
139 | .size = MTDPART_SIZ_FULL, | |
140 | }, | |
141 | }; | |
142 | ||
fdfb03ba MR |
143 | static struct omap_onenand_platform_data igep_onenand_data = { |
144 | .parts = igep_onenand_partitions, | |
145 | .nr_parts = ARRAY_SIZE(igep_onenand_partitions), | |
cddb483a EBS |
146 | .dma_channel = -1, /* disable DMA in OMAP OneNAND driver */ |
147 | }; | |
148 | ||
fdfb03ba | 149 | static struct platform_device igep_onenand_device = { |
cddb483a EBS |
150 | .name = "omap2-onenand", |
151 | .id = -1, | |
152 | .dev = { | |
fdfb03ba | 153 | .platform_data = &igep_onenand_data, |
cddb483a EBS |
154 | }, |
155 | }; | |
156 | ||
fdfb03ba | 157 | static void __init igep_flash_init(void) |
cddb483a | 158 | { |
235228ba EBS |
159 | u8 cs = 0; |
160 | u8 onenandcs = GPMC_CS_NUM + 1; | |
cddb483a | 161 | |
235228ba EBS |
162 | for (cs = 0; cs < GPMC_CS_NUM; cs++) { |
163 | u32 ret; | |
cddb483a EBS |
164 | ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); |
165 | ||
166 | /* Check if NAND/oneNAND is configured */ | |
167 | if ((ret & 0xC00) == 0x800) | |
168 | /* NAND found */ | |
fdfb03ba | 169 | pr_err("IGEP: Unsupported NAND found\n"); |
cddb483a EBS |
170 | else { |
171 | ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7); | |
172 | if ((ret & 0x3F) == (ONENAND_MAP >> 24)) | |
173 | /* ONENAND found */ | |
174 | onenandcs = cs; | |
175 | } | |
cddb483a | 176 | } |
235228ba | 177 | |
cddb483a | 178 | if (onenandcs > GPMC_CS_NUM) { |
fdfb03ba | 179 | pr_err("IGEP: Unable to find configuration in GPMC\n"); |
cddb483a EBS |
180 | return; |
181 | } | |
182 | ||
fdfb03ba | 183 | igep_onenand_data.cs = onenandcs; |
235228ba | 184 | |
fdfb03ba MR |
185 | if (platform_device_register(&igep_onenand_device) < 0) |
186 | pr_err("IGEP: Unable to register OneNAND device\n"); | |
cddb483a EBS |
187 | } |
188 | ||
189 | #else | |
fdfb03ba | 190 | static void __init igep_flash_init(void) {} |
cddb483a EBS |
191 | #endif |
192 | ||
58e11162 EBS |
193 | #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) |
194 | ||
195 | #include <linux/smsc911x.h> | |
21b42731 | 196 | #include <plat/gpmc-smsc911x.h> |
58e11162 | 197 | |
21b42731 MR |
198 | static struct omap_smsc911x_platform_data smsc911x_cfg = { |
199 | .cs = IGEP2_SMSC911X_CS, | |
200 | .gpio_irq = IGEP2_SMSC911X_GPIO, | |
201 | .gpio_reset = -EINVAL, | |
202 | .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, | |
58e11162 EBS |
203 | }; |
204 | ||
205 | static inline void __init igep2_init_smsc911x(void) | |
206 | { | |
21b42731 | 207 | gpmc_smsc911x_init(&smsc911x_cfg); |
58e11162 EBS |
208 | } |
209 | ||
210 | #else | |
211 | static inline void __init igep2_init_smsc911x(void) { } | |
212 | #endif | |
213 | ||
fdfb03ba | 214 | static struct regulator_consumer_supply igep_vmmc1_supply = |
0005ae73 | 215 | REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"); |
58e11162 EBS |
216 | |
217 | /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ | |
fdfb03ba | 218 | static struct regulator_init_data igep_vmmc1 = { |
58e11162 EBS |
219 | .constraints = { |
220 | .min_uV = 1850000, | |
221 | .max_uV = 3150000, | |
222 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
223 | | REGULATOR_MODE_STANDBY, | |
224 | .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | |
225 | | REGULATOR_CHANGE_MODE | |
226 | | REGULATOR_CHANGE_STATUS, | |
227 | }, | |
228 | .num_consumer_supplies = 1, | |
fdfb03ba | 229 | .consumer_supplies = &igep_vmmc1_supply, |
58e11162 EBS |
230 | }; |
231 | ||
fdfb03ba | 232 | static struct regulator_consumer_supply igep_vio_supply = |
0005ae73 | 233 | REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"); |
da07c0cf | 234 | |
fdfb03ba | 235 | static struct regulator_init_data igep_vio = { |
da07c0cf MZ |
236 | .constraints = { |
237 | .min_uV = 1800000, | |
238 | .max_uV = 1800000, | |
239 | .apply_uV = 1, | |
240 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
241 | | REGULATOR_MODE_STANDBY, | |
242 | .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | |
243 | | REGULATOR_CHANGE_MODE | |
244 | | REGULATOR_CHANGE_STATUS, | |
245 | }, | |
246 | .num_consumer_supplies = 1, | |
fdfb03ba | 247 | .consumer_supplies = &igep_vio_supply, |
da07c0cf MZ |
248 | }; |
249 | ||
fdfb03ba | 250 | static struct regulator_consumer_supply igep_vmmc2_supply = |
0005ae73 | 251 | REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"); |
da07c0cf | 252 | |
fdfb03ba | 253 | static struct regulator_init_data igep_vmmc2 = { |
da07c0cf MZ |
254 | .constraints = { |
255 | .valid_modes_mask = REGULATOR_MODE_NORMAL, | |
256 | .always_on = 1, | |
257 | }, | |
258 | .num_consumer_supplies = 1, | |
fdfb03ba | 259 | .consumer_supplies = &igep_vmmc2_supply, |
da07c0cf MZ |
260 | }; |
261 | ||
fdfb03ba | 262 | static struct fixed_voltage_config igep_vwlan = { |
da07c0cf MZ |
263 | .supply_name = "vwlan", |
264 | .microvolts = 3300000, | |
265 | .gpio = -EINVAL, | |
266 | .enabled_at_boot = 1, | |
fdfb03ba | 267 | .init_data = &igep_vmmc2, |
da07c0cf MZ |
268 | }; |
269 | ||
fdfb03ba | 270 | static struct platform_device igep_vwlan_device = { |
da07c0cf MZ |
271 | .name = "reg-fixed-voltage", |
272 | .id = 0, | |
273 | .dev = { | |
fdfb03ba | 274 | .platform_data = &igep_vwlan, |
da07c0cf MZ |
275 | }, |
276 | }; | |
277 | ||
68ff0423 | 278 | static struct omap2_hsmmc_info mmc[] = { |
58e11162 EBS |
279 | { |
280 | .mmc = 1, | |
3a63833e | 281 | .caps = MMC_CAP_4_BIT_DATA, |
58e11162 EBS |
282 | .gpio_cd = -EINVAL, |
283 | .gpio_wp = -EINVAL, | |
284 | }, | |
5a9fcc99 | 285 | #if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE) |
58e11162 EBS |
286 | { |
287 | .mmc = 2, | |
3a63833e | 288 | .caps = MMC_CAP_4_BIT_DATA, |
58e11162 EBS |
289 | .gpio_cd = -EINVAL, |
290 | .gpio_wp = -EINVAL, | |
291 | }, | |
5a9fcc99 | 292 | #endif |
58e11162 EBS |
293 | {} /* Terminator */ |
294 | }; | |
295 | ||
bee15390 EBS |
296 | #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) |
297 | #include <linux/leds.h> | |
298 | ||
fdfb03ba | 299 | static struct gpio_led igep_gpio_leds[] = { |
bee15390 EBS |
300 | [0] = { |
301 | .name = "gpio-led:red:d0", | |
bee15390 EBS |
302 | .default_trigger = "default-off" |
303 | }, | |
304 | [1] = { | |
305 | .name = "gpio-led:green:d0", | |
bee15390 EBS |
306 | .default_trigger = "default-off", |
307 | }, | |
308 | [2] = { | |
309 | .name = "gpio-led:red:d1", | |
bee15390 EBS |
310 | .default_trigger = "default-off", |
311 | }, | |
312 | [3] = { | |
313 | .name = "gpio-led:green:d1", | |
314 | .default_trigger = "heartbeat", | |
315 | .gpio = -EINVAL, /* gets replaced */ | |
70e77760 | 316 | .active_low = 1, |
bee15390 EBS |
317 | }, |
318 | }; | |
319 | ||
fdfb03ba MR |
320 | static struct gpio_led_platform_data igep_led_pdata = { |
321 | .leds = igep_gpio_leds, | |
322 | .num_leds = ARRAY_SIZE(igep_gpio_leds), | |
bee15390 EBS |
323 | }; |
324 | ||
fdfb03ba | 325 | static struct platform_device igep_led_device = { |
bee15390 EBS |
326 | .name = "leds-gpio", |
327 | .id = -1, | |
328 | .dev = { | |
fdfb03ba | 329 | .platform_data = &igep_led_pdata, |
bee15390 EBS |
330 | }, |
331 | }; | |
332 | ||
fdfb03ba | 333 | static void __init igep_leds_init(void) |
bee15390 | 334 | { |
0d4ab9a5 MR |
335 | igep_gpio_leds[0].gpio = IGEP2_GPIO_LED0_RED; |
336 | igep_gpio_leds[1].gpio = IGEP2_GPIO_LED0_GREEN; | |
337 | igep_gpio_leds[2].gpio = IGEP2_GPIO_LED1_RED; | |
338 | ||
fdfb03ba | 339 | platform_device_register(&igep_led_device); |
bee15390 EBS |
340 | } |
341 | ||
342 | #else | |
fdfb03ba | 343 | static struct gpio igep_gpio_leds[] __initdata = { |
bc593f5d IG |
344 | { IGEP2_GPIO_LED0_RED, GPIOF_OUT_INIT_LOW, "gpio-led:red:d0" }, |
345 | { IGEP2_GPIO_LED0_GREEN, GPIOF_OUT_INIT_LOW, "gpio-led:green:d0" }, | |
346 | { IGEP2_GPIO_LED1_RED, GPIOF_OUT_INIT_LOW, "gpio-led:red:d1" }, | |
347 | }; | |
348 | ||
fdfb03ba | 349 | static inline void igep_leds_init(void) |
bee15390 | 350 | { |
0d4ab9a5 MR |
351 | int i; |
352 | ||
fdfb03ba | 353 | if (gpio_request_array(igep_gpio_leds, ARRAY_SIZE(igep_gpio_leds))) { |
bc593f5d IG |
354 | pr_warning("IGEP v2: Could not obtain leds gpios\n"); |
355 | return; | |
356 | } | |
bee15390 | 357 | |
0d4ab9a5 MR |
358 | for (i = 0; i < ARRAY_SIZE(igep_gpio_leds); i++) |
359 | gpio_export(igep_gpio_leds[i].gpio, 0); | |
bee15390 EBS |
360 | } |
361 | #endif | |
362 | ||
bc593f5d IG |
363 | static struct gpio igep2_twl_gpios[] = { |
364 | { -EINVAL, GPIOF_IN, "GPIO_EHCI_NOC" }, | |
365 | { -EINVAL, GPIOF_OUT_INIT_LOW, "GPIO_USBH_CPEN" }, | |
366 | }; | |
367 | ||
fdfb03ba | 368 | static int igep_twl_gpio_setup(struct device *dev, |
58e11162 EBS |
369 | unsigned gpio, unsigned ngpio) |
370 | { | |
bc593f5d IG |
371 | int ret; |
372 | ||
58e11162 EBS |
373 | /* gpio + 0 is "mmc0_cd" (input/IRQ) */ |
374 | mmc[0].gpio_cd = gpio + 0; | |
68ff0423 | 375 | omap2_hsmmc_init(mmc); |
58e11162 | 376 | |
0d4ab9a5 MR |
377 | /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ |
378 | #if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE) | |
379 | ret = gpio_request_one(gpio + TWL4030_GPIO_MAX + 1, GPIOF_OUT_INIT_HIGH, | |
380 | "gpio-led:green:d1"); | |
381 | if (ret == 0) | |
382 | gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0); | |
383 | else | |
384 | pr_warning("IGEP: Could not obtain gpio GPIO_LED1_GREEN\n"); | |
385 | #else | |
386 | igep_gpio_leds[3].gpio = gpio + TWL4030_GPIO_MAX + 1; | |
387 | #endif | |
388 | ||
61e118dd EBS |
389 | /* |
390 | * REVISIT: need ehci-omap hooks for external VBUS | |
391 | * power switch and overcurrent detect | |
392 | */ | |
bc593f5d | 393 | igep2_twl_gpios[0].gpio = gpio + 1; |
61e118dd | 394 | |
bc593f5d IG |
395 | /* TWL4030_GPIO_MAX + 0 == ledA, GPIO_USBH_CPEN (out, active low) */ |
396 | igep2_twl_gpios[1].gpio = gpio + TWL4030_GPIO_MAX; | |
397 | ||
398 | ret = gpio_request_array(igep2_twl_gpios, ARRAY_SIZE(igep2_twl_gpios)); | |
399 | if (ret < 0) | |
61e118dd EBS |
400 | pr_err("IGEP2: Could not obtain gpio for USBH_CPEN"); |
401 | ||
58e11162 EBS |
402 | return 0; |
403 | }; | |
404 | ||
fdfb03ba | 405 | static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = { |
58e11162 EBS |
406 | .gpio_base = OMAP_MAX_GPIO_LINES, |
407 | .irq_base = TWL4030_GPIO_IRQ_BASE, | |
408 | .irq_end = TWL4030_GPIO_IRQ_END, | |
bee15390 | 409 | .use_leds = true, |
fdfb03ba | 410 | .setup = igep_twl_gpio_setup, |
58e11162 EBS |
411 | }; |
412 | ||
fdfb03ba | 413 | static struct twl4030_usb_data igep_usb_data = { |
58e11162 EBS |
414 | .usb_mode = T2_USB_MODE_ULPI, |
415 | }; | |
416 | ||
691de27f EBS |
417 | static int igep2_enable_dvi(struct omap_dss_device *dssdev) |
418 | { | |
419 | gpio_direction_output(IGEP2_GPIO_DVI_PUP, 1); | |
420 | ||
421 | return 0; | |
422 | } | |
423 | ||
424 | static void igep2_disable_dvi(struct omap_dss_device *dssdev) | |
425 | { | |
426 | gpio_direction_output(IGEP2_GPIO_DVI_PUP, 0); | |
427 | } | |
428 | ||
89747c91 BW |
429 | static struct panel_generic_dpi_data dvi_panel = { |
430 | .name = "generic", | |
431 | .platform_enable = igep2_enable_dvi, | |
432 | .platform_disable = igep2_disable_dvi, | |
433 | }; | |
434 | ||
691de27f EBS |
435 | static struct omap_dss_device igep2_dvi_device = { |
436 | .type = OMAP_DISPLAY_TYPE_DPI, | |
437 | .name = "dvi", | |
89747c91 BW |
438 | .driver_name = "generic_dpi_panel", |
439 | .data = &dvi_panel, | |
691de27f | 440 | .phy.dpi.data_lines = 24, |
691de27f EBS |
441 | }; |
442 | ||
443 | static struct omap_dss_device *igep2_dss_devices[] = { | |
444 | &igep2_dvi_device | |
445 | }; | |
446 | ||
447 | static struct omap_dss_board_info igep2_dss_data = { | |
448 | .num_devices = ARRAY_SIZE(igep2_dss_devices), | |
449 | .devices = igep2_dss_devices, | |
450 | .default_device = &igep2_dvi_device, | |
451 | }; | |
452 | ||
c8aac01b SG |
453 | static struct regulator_consumer_supply igep2_vpll2_supplies[] = { |
454 | REGULATOR_SUPPLY("vdds_dsi", "omapdss"), | |
455 | REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), | |
456 | }; | |
691de27f EBS |
457 | |
458 | static struct regulator_init_data igep2_vpll2 = { | |
459 | .constraints = { | |
460 | .name = "VDVI", | |
461 | .min_uV = 1800000, | |
462 | .max_uV = 1800000, | |
463 | .apply_uV = true, | |
464 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
465 | | REGULATOR_MODE_STANDBY, | |
466 | .valid_ops_mask = REGULATOR_CHANGE_MODE | |
467 | | REGULATOR_CHANGE_STATUS, | |
468 | }, | |
c8aac01b SG |
469 | .num_consumer_supplies = ARRAY_SIZE(igep2_vpll2_supplies), |
470 | .consumer_supplies = igep2_vpll2_supplies, | |
691de27f EBS |
471 | }; |
472 | ||
473 | static void __init igep2_display_init(void) | |
474 | { | |
bc593f5d IG |
475 | int err = gpio_request_one(IGEP2_GPIO_DVI_PUP, GPIOF_OUT_INIT_HIGH, |
476 | "GPIO_DVI_PUP"); | |
477 | if (err) | |
691de27f EBS |
478 | pr_err("IGEP v2: Could not obtain gpio GPIO_DVI_PUP\n"); |
479 | } | |
228893f9 | 480 | |
fdfb03ba MR |
481 | static struct platform_device *igep_devices[] __initdata = { |
482 | &igep_vwlan_device, | |
691de27f EBS |
483 | }; |
484 | ||
fdfb03ba | 485 | static void __init igep_init_early(void) |
58e11162 | 486 | { |
4805734b PW |
487 | omap2_init_common_infrastructure(); |
488 | omap2_init_common_devices(m65kxxxxam_sdrc_params, | |
489 | m65kxxxxam_sdrc_params); | |
58e11162 EBS |
490 | } |
491 | ||
6a58baf8 | 492 | static struct twl4030_codec_audio_data igep2_audio_data; |
7f5f23da EBS |
493 | |
494 | static struct twl4030_codec_data igep2_codec_data = { | |
495 | .audio_mclk = 26000000, | |
496 | .audio = &igep2_audio_data, | |
497 | }; | |
498 | ||
18cbc7d9 EBS |
499 | static int igep2_keymap[] = { |
500 | KEY(0, 0, KEY_LEFT), | |
501 | KEY(0, 1, KEY_RIGHT), | |
502 | KEY(0, 2, KEY_A), | |
503 | KEY(0, 3, KEY_B), | |
504 | KEY(1, 0, KEY_DOWN), | |
505 | KEY(1, 1, KEY_UP), | |
506 | KEY(1, 2, KEY_E), | |
507 | KEY(1, 3, KEY_F), | |
508 | KEY(2, 0, KEY_ENTER), | |
509 | KEY(2, 1, KEY_I), | |
510 | KEY(2, 2, KEY_J), | |
511 | KEY(2, 3, KEY_K), | |
512 | KEY(3, 0, KEY_M), | |
513 | KEY(3, 1, KEY_N), | |
514 | KEY(3, 2, KEY_O), | |
515 | KEY(3, 3, KEY_P) | |
516 | }; | |
517 | ||
518 | static struct matrix_keymap_data igep2_keymap_data = { | |
519 | .keymap = igep2_keymap, | |
520 | .keymap_size = ARRAY_SIZE(igep2_keymap), | |
521 | }; | |
522 | ||
523 | static struct twl4030_keypad_data igep2_keypad_pdata = { | |
524 | .keymap_data = &igep2_keymap_data, | |
525 | .rows = 4, | |
526 | .cols = 4, | |
527 | .rep = 1, | |
528 | }; | |
529 | ||
fdfb03ba | 530 | static struct twl4030_platform_data igep_twldata = { |
58e11162 EBS |
531 | .irq_base = TWL4030_IRQ_BASE, |
532 | .irq_end = TWL4030_IRQ_END, | |
533 | ||
534 | /* platform_data for children goes here */ | |
fdfb03ba | 535 | .usb = &igep_usb_data, |
fdfb03ba | 536 | .gpio = &igep_twl4030_gpio_pdata, |
fdfb03ba | 537 | .vmmc1 = &igep_vmmc1, |
fdfb03ba | 538 | .vio = &igep_vio, |
58e11162 EBS |
539 | }; |
540 | ||
91d139cf EBS |
541 | static struct i2c_board_info __initdata igep2_i2c3_boardinfo[] = { |
542 | { | |
543 | I2C_BOARD_INFO("eeprom", 0x50), | |
544 | }, | |
545 | }; | |
546 | ||
fdfb03ba | 547 | static void __init igep_i2c_init(void) |
58e11162 | 548 | { |
91d139cf EBS |
549 | int ret; |
550 | ||
91d139cf EBS |
551 | /* |
552 | * Bus 3 is attached to the DVI port where devices like the pico DLP | |
553 | * projector don't work reliably with 400kHz | |
554 | */ | |
555 | ret = omap_register_i2c_bus(3, 100, igep2_i2c3_boardinfo, | |
556 | ARRAY_SIZE(igep2_i2c3_boardinfo)); | |
557 | if (ret) | |
558 | pr_warning("IGEP2: Could not register I2C3 bus (%d)\n", ret); | |
0d4ab9a5 MR |
559 | |
560 | igep_twldata.codec = &igep2_codec_data; | |
561 | igep_twldata.keypad = &igep2_keypad_pdata; | |
562 | igep_twldata.vpll2 = &igep2_vpll2; | |
563 | ||
564 | omap3_pmic_init("twl4030", &igep_twldata); | |
58e11162 EBS |
565 | } |
566 | ||
fdfb03ba | 567 | static const struct usbhs_omap_board_data igep2_usbhs_bdata __initconst = { |
181b250c KM |
568 | .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, |
569 | .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, | |
570 | .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, | |
d0885486 EBS |
571 | |
572 | .phy_reset = true, | |
f6b74535 EBS |
573 | .reset_gpio_port[0] = IGEP2_GPIO_USBH_NRESET, |
574 | .reset_gpio_port[1] = -EINVAL, | |
d0885486 EBS |
575 | .reset_gpio_port[2] = -EINVAL, |
576 | }; | |
577 | ||
ca5742bd TL |
578 | #ifdef CONFIG_OMAP_MUX |
579 | static struct omap_board_mux board_mux[] __initdata = { | |
580 | { .reg_offset = OMAP_MUX_TERMINATOR }, | |
581 | }; | |
ca5742bd TL |
582 | #endif |
583 | ||
5a9fcc99 | 584 | #if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE) |
fdfb03ba | 585 | static struct gpio igep_wlan_bt_gpios[] __initdata = { |
bc593f5d IG |
586 | { -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_WIFI_NPD" }, |
587 | { -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_WIFI_NRESET" }, | |
588 | { -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_BT_NRESET" }, | |
589 | }; | |
5a9fcc99 | 590 | |
fdfb03ba | 591 | static void __init igep_wlan_bt_init(void) |
5a9fcc99 | 592 | { |
bc593f5d | 593 | int err; |
5a9fcc99 EBS |
594 | |
595 | /* GPIO's for WLAN-BT combo depends on hardware revision */ | |
596 | if (hwrev == IGEP2_BOARD_HWREV_B) { | |
fdfb03ba MR |
597 | igep_wlan_bt_gpios[0].gpio = IGEP2_RB_GPIO_WIFI_NPD; |
598 | igep_wlan_bt_gpios[1].gpio = IGEP2_RB_GPIO_WIFI_NRESET; | |
599 | igep_wlan_bt_gpios[2].gpio = IGEP2_RB_GPIO_BT_NRESET; | |
5a9fcc99 | 600 | } else if (hwrev == IGEP2_BOARD_HWREV_C) { |
fdfb03ba MR |
601 | igep_wlan_bt_gpios[0].gpio = IGEP2_RC_GPIO_WIFI_NPD; |
602 | igep_wlan_bt_gpios[1].gpio = IGEP2_RC_GPIO_WIFI_NRESET; | |
603 | igep_wlan_bt_gpios[2].gpio = IGEP2_RC_GPIO_BT_NRESET; | |
5a9fcc99 EBS |
604 | } else |
605 | return; | |
606 | ||
fdfb03ba MR |
607 | err = gpio_request_array(igep_wlan_bt_gpios, |
608 | ARRAY_SIZE(igep_wlan_bt_gpios)); | |
bc593f5d IG |
609 | if (err) { |
610 | pr_warning("IGEP2: Could not obtain WIFI/BT gpios\n"); | |
611 | return; | |
612 | } | |
613 | ||
fdfb03ba MR |
614 | gpio_export(igep_wlan_bt_gpios[0].gpio, 0); |
615 | gpio_export(igep_wlan_bt_gpios[1].gpio, 0); | |
616 | gpio_export(igep_wlan_bt_gpios[2].gpio, 0); | |
bc593f5d | 617 | |
fdfb03ba | 618 | gpio_set_value(igep_wlan_bt_gpios[1].gpio, 0); |
bc593f5d | 619 | udelay(10); |
fdfb03ba | 620 | gpio_set_value(igep_wlan_bt_gpios[1].gpio, 1); |
5a9fcc99 | 621 | |
5a9fcc99 EBS |
622 | } |
623 | #else | |
fdfb03ba | 624 | static inline void __init igep_wlan_bt_init(void) { } |
5a9fcc99 EBS |
625 | #endif |
626 | ||
fdfb03ba | 627 | static void __init igep_init(void) |
58e11162 | 628 | { |
ca5742bd | 629 | omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); |
3f8c48d9 EBS |
630 | |
631 | /* Get IGEP2 hardware revision */ | |
632 | igep2_get_revision(); | |
91d139cf | 633 | /* Register I2C busses and drivers */ |
fdfb03ba MR |
634 | igep_i2c_init(); |
635 | platform_add_devices(igep_devices, ARRAY_SIZE(igep_devices)); | |
58e11162 | 636 | omap_serial_init(); |
9e18630b | 637 | usb_musb_init(NULL); |
58e11162 | 638 | |
fdfb03ba MR |
639 | igep_flash_init(); |
640 | igep_leds_init(); | |
58e11162 | 641 | |
5a9fcc99 | 642 | /* |
25985edc | 643 | * WLAN-BT combo module from MuRata which has a Marvell WLAN |
5a9fcc99 EBS |
644 | * (88W8686) + CSR Bluetooth chipset. Uses SDIO interface. |
645 | */ | |
fdfb03ba | 646 | igep_wlan_bt_init(); |
c67b0d98 | 647 | |
0d4ab9a5 MR |
648 | omap_display_init(&igep2_dss_data); |
649 | igep2_display_init(); | |
650 | igep2_init_smsc911x(); | |
651 | usbhs_init(&igep2_usbhs_bdata); | |
58e11162 EBS |
652 | } |
653 | ||
58e11162 | 654 | MACHINE_START(IGEP0020, "IGEP v2 board") |
58e11162 | 655 | .boot_params = 0x80000100, |
71ee7dad | 656 | .reserve = omap_reserve, |
3dc3bad6 | 657 | .map_io = omap3_map_io, |
fdfb03ba | 658 | .init_early = igep_init_early, |
3dc3bad6 | 659 | .init_irq = omap_init_irq, |
fdfb03ba | 660 | .init_machine = igep_init, |
58e11162 EBS |
661 | .timer = &omap_timer, |
662 | MACHINE_END |